Diff: TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/device/MK64F12/MK64F12_gpio.h

Revision:

90:cb3d968589d8

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_MCU_K64F/device/device/MK64F12/MK64F12_gpio.h	Tue Oct 28 16:40:41 2014 +0000
@@ -0,0 +1,490 @@
+/*
+** ###################################################################
+**     Compilers:           Keil ARM C/C++ Compiler
+**                          Freescale C/C++ for Embedded ARM
+**                          GNU C Compiler
+**                          IAR ANSI C/C++ Compiler for ARM
+**
+**     Reference manual:    K64P144M120SF5RM, Rev.2, January 2014
+**     Version:             rev. 2.5, 2014-02-10
+**     Build:               b140604
+**
+**     Abstract:
+**         Extension to the CMSIS register access layer header.
+**
+**     Copyright (c) 2014 Freescale Semiconductor, Inc.
+**     All rights reserved.
+**
+**     Redistribution and use in source and binary forms, with or without modification,
+**     are permitted provided that the following conditions are met:
+**
+**     o Redistributions of source code must retain the above copyright notice, this list
+**       of conditions and the following disclaimer.
+**
+**     o Redistributions in binary form must reproduce the above copyright notice, this
+**       list of conditions and the following disclaimer in the documentation and/or
+**       other materials provided with the distribution.
+**
+**     o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+**       contributors may be used to endorse or promote products derived from this
+**       software without specific prior written permission.
+**
+**     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+**     ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+**     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+**     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+**     ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+**     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+**     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+**     ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+**     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+**     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+**
+**     http:                 www.freescale.com
+**     mail:                 support@freescale.com
+**
+**     Revisions:
+**     - rev. 1.0 (2013-08-12)
+**         Initial version.
+**     - rev. 2.0 (2013-10-29)
+**         Register accessor macros added to the memory map.
+**         Symbols for Processor Expert memory map compatibility added to the memory map.
+**         Startup file for gcc has been updated according to CMSIS 3.2.
+**         System initialization updated.
+**         MCG - registers updated.
+**         PORTA, PORTB, PORTC, PORTE - registers for digital filter removed.
+**     - rev. 2.1 (2013-10-30)
+**         Definition of BITBAND macros updated to support peripherals with 32-bit acces disabled.
+**     - rev. 2.2 (2013-12-09)
+**         DMA - EARS register removed.
+**         AIPS0, AIPS1 - MPRA register updated.
+**     - rev. 2.3 (2014-01-24)
+**         Update according to reference manual rev. 2
+**         ENET, MCG, MCM, SIM, USB - registers updated
+**     - rev. 2.4 (2014-02-10)
+**         The declaration of clock configurations has been moved to separate header file system_MK64F12.h
+**         Update of SystemInit() and SystemCoreClockUpdate() functions.
+**     - rev. 2.5 (2014-02-10)
+**         The declaration of clock configurations has been moved to separate header file system_MK64F12.h
+**         Update of SystemInit() and SystemCoreClockUpdate() functions.
+**         Module access macro module_BASES replaced by module_BASE_PTRS.
+**
+** ###################################################################
+*/
+
+/*
+ * WARNING! DO NOT EDIT THIS FILE DIRECTLY!
+ *
+ * This file was generated automatically and any changes may be lost.
+ */
+#ifndef __HW_GPIO_REGISTERS_H__
+#define __HW_GPIO_REGISTERS_H__
+
+#include "MK64F12.h"
+#include "fsl_bitaccess.h"
+
+/*
+ * MK64F12 GPIO
+ *
+ * General Purpose Input/Output
+ *
+ * Registers defined in this header file:
+ * - HW_GPIO_PDOR - Port Data Output Register
+ * - HW_GPIO_PSOR - Port Set Output Register
+ * - HW_GPIO_PCOR - Port Clear Output Register
+ * - HW_GPIO_PTOR - Port Toggle Output Register
+ * - HW_GPIO_PDIR - Port Data Input Register
+ * - HW_GPIO_PDDR - Port Data Direction Register
+ *
+ * - hw_gpio_t - Struct containing all module registers.
+ */
+
+#define HW_GPIO_INSTANCE_COUNT (5U) /*!< Number of instances of the GPIO module. */
+#define HW_GPIOA (0U) /*!< Instance number for GPIOA. */
+#define HW_GPIOB (1U) /*!< Instance number for GPIOB. */
+#define HW_GPIOC (2U) /*!< Instance number for GPIOC. */
+#define HW_GPIOD (3U) /*!< Instance number for GPIOD. */
+#define HW_GPIOE (4U) /*!< Instance number for GPIOE. */
+
+/*******************************************************************************
+ * HW_GPIO_PDOR - Port Data Output Register
+ ******************************************************************************/
+
+/*!
+ * @brief HW_GPIO_PDOR - Port Data Output Register (RW)
+ *
+ * Reset value: 0x00000000U
+ *
+ * This register configures the logic levels that are driven on each
+ * general-purpose output pins. Do not modify pin configuration registers associated with
+ * pins not available in your selected package. All unbonded pins not available in
+ * your package will default to DISABLE state for lowest power consumption.
+ */
+typedef union _hw_gpio_pdor
+{
+    uint32_t U;
+    struct _hw_gpio_pdor_bitfields
+    {
+        uint32_t PDO : 32;             /*!< [31:0] Port Data Output */
+    } B;
+} hw_gpio_pdor_t;
+
+/*!
+ * @name Constants and macros for entire GPIO_PDOR register
+ */
+/*@{*/
+#define HW_GPIO_PDOR_ADDR(x)     ((x) + 0x0U)
+
+#define HW_GPIO_PDOR(x)          (*(__IO hw_gpio_pdor_t *) HW_GPIO_PDOR_ADDR(x))
+#define HW_GPIO_PDOR_RD(x)       (HW_GPIO_PDOR(x).U)
+#define HW_GPIO_PDOR_WR(x, v)    (HW_GPIO_PDOR(x).U = (v))
+#define HW_GPIO_PDOR_SET(x, v)   (HW_GPIO_PDOR_WR(x, HW_GPIO_PDOR_RD(x) |  (v)))
+#define HW_GPIO_PDOR_CLR(x, v)   (HW_GPIO_PDOR_WR(x, HW_GPIO_PDOR_RD(x) & ~(v)))
+#define HW_GPIO_PDOR_TOG(x, v)   (HW_GPIO_PDOR_WR(x, HW_GPIO_PDOR_RD(x) ^  (v)))
+/*@}*/
+
+/*
+ * Constants & macros for individual GPIO_PDOR bitfields
+ */
+
+/*!
+ * @name Register GPIO_PDOR, field PDO[31:0] (RW)
+ *
+ * Register bits for unbonded pins return a undefined value when read.
+ *
+ * Values:
+ * - 0 - Logic level 0 is driven on pin, provided pin is configured for
+ *     general-purpose output.
+ * - 1 - Logic level 1 is driven on pin, provided pin is configured for
+ *     general-purpose output.
+ */
+/*@{*/
+#define BP_GPIO_PDOR_PDO     (0U)          /*!< Bit position for GPIO_PDOR_PDO. */
+#define BM_GPIO_PDOR_PDO     (0xFFFFFFFFU) /*!< Bit mask for GPIO_PDOR_PDO. */
+#define BS_GPIO_PDOR_PDO     (32U)         /*!< Bit field size in bits for GPIO_PDOR_PDO. */
+
+/*! @brief Read current value of the GPIO_PDOR_PDO field. */
+#define BR_GPIO_PDOR_PDO(x)  (HW_GPIO_PDOR(x).U)
+
+/*! @brief Format value for bitfield GPIO_PDOR_PDO. */
+#define BF_GPIO_PDOR_PDO(v)  ((uint32_t)((uint32_t)(v) << BP_GPIO_PDOR_PDO) & BM_GPIO_PDOR_PDO)
+
+/*! @brief Set the PDO field to a new value. */
+#define BW_GPIO_PDOR_PDO(x, v) (HW_GPIO_PDOR_WR(x, v))
+/*@}*/
+
+/*******************************************************************************
+ * HW_GPIO_PSOR - Port Set Output Register
+ ******************************************************************************/
+
+/*!
+ * @brief HW_GPIO_PSOR - Port Set Output Register (WORZ)
+ *
+ * Reset value: 0x00000000U
+ *
+ * This register configures whether to set the fields of the PDOR.
+ */
+typedef union _hw_gpio_psor
+{
+    uint32_t U;
+    struct _hw_gpio_psor_bitfields
+    {
+        uint32_t PTSO : 32;            /*!< [31:0] Port Set Output */
+    } B;
+} hw_gpio_psor_t;
+
+/*!
+ * @name Constants and macros for entire GPIO_PSOR register
+ */
+/*@{*/
+#define HW_GPIO_PSOR_ADDR(x)     ((x) + 0x4U)
+
+#define HW_GPIO_PSOR(x)          (*(__O hw_gpio_psor_t *) HW_GPIO_PSOR_ADDR(x))
+#define HW_GPIO_PSOR_RD(x)       (HW_GPIO_PSOR(x).U)
+#define HW_GPIO_PSOR_WR(x, v)    (HW_GPIO_PSOR(x).U = (v))
+/*@}*/
+
+/*
+ * Constants & macros for individual GPIO_PSOR bitfields
+ */
+
+/*!
+ * @name Register GPIO_PSOR, field PTSO[31:0] (WORZ)
+ *
+ * Writing to this register will update the contents of the corresponding bit in
+ * the PDOR as follows:
+ *
+ * Values:
+ * - 0 - Corresponding bit in PDORn does not change.
+ * - 1 - Corresponding bit in PDORn is set to logic 1.
+ */
+/*@{*/
+#define BP_GPIO_PSOR_PTSO    (0U)          /*!< Bit position for GPIO_PSOR_PTSO. */
+#define BM_GPIO_PSOR_PTSO    (0xFFFFFFFFU) /*!< Bit mask for GPIO_PSOR_PTSO. */
+#define BS_GPIO_PSOR_PTSO    (32U)         /*!< Bit field size in bits for GPIO_PSOR_PTSO. */
+
+/*! @brief Format value for bitfield GPIO_PSOR_PTSO. */
+#define BF_GPIO_PSOR_PTSO(v) ((uint32_t)((uint32_t)(v) << BP_GPIO_PSOR_PTSO) & BM_GPIO_PSOR_PTSO)
+
+/*! @brief Set the PTSO field to a new value. */
+#define BW_GPIO_PSOR_PTSO(x, v) (HW_GPIO_PSOR_WR(x, v))
+/*@}*/
+
+/*******************************************************************************
+ * HW_GPIO_PCOR - Port Clear Output Register
+ ******************************************************************************/
+
+/*!
+ * @brief HW_GPIO_PCOR - Port Clear Output Register (WORZ)
+ *
+ * Reset value: 0x00000000U
+ *
+ * This register configures whether to clear the fields of PDOR.
+ */
+typedef union _hw_gpio_pcor
+{
+    uint32_t U;
+    struct _hw_gpio_pcor_bitfields
+    {
+        uint32_t PTCO : 32;            /*!< [31:0] Port Clear Output */
+    } B;
+} hw_gpio_pcor_t;
+
+/*!
+ * @name Constants and macros for entire GPIO_PCOR register
+ */
+/*@{*/
+#define HW_GPIO_PCOR_ADDR(x)     ((x) + 0x8U)
+
+#define HW_GPIO_PCOR(x)          (*(__O hw_gpio_pcor_t *) HW_GPIO_PCOR_ADDR(x))
+#define HW_GPIO_PCOR_RD(x)       (HW_GPIO_PCOR(x).U)
+#define HW_GPIO_PCOR_WR(x, v)    (HW_GPIO_PCOR(x).U = (v))
+/*@}*/
+
+/*
+ * Constants & macros for individual GPIO_PCOR bitfields
+ */
+
+/*!
+ * @name Register GPIO_PCOR, field PTCO[31:0] (WORZ)
+ *
+ * Writing to this register will update the contents of the corresponding bit in
+ * the Port Data Output Register (PDOR) as follows:
+ *
+ * Values:
+ * - 0 - Corresponding bit in PDORn does not change.
+ * - 1 - Corresponding bit in PDORn is cleared to logic 0.
+ */
+/*@{*/
+#define BP_GPIO_PCOR_PTCO    (0U)          /*!< Bit position for GPIO_PCOR_PTCO. */
+#define BM_GPIO_PCOR_PTCO    (0xFFFFFFFFU) /*!< Bit mask for GPIO_PCOR_PTCO. */
+#define BS_GPIO_PCOR_PTCO    (32U)         /*!< Bit field size in bits for GPIO_PCOR_PTCO. */
+
+/*! @brief Format value for bitfield GPIO_PCOR_PTCO. */
+#define BF_GPIO_PCOR_PTCO(v) ((uint32_t)((uint32_t)(v) << BP_GPIO_PCOR_PTCO) & BM_GPIO_PCOR_PTCO)
+
+/*! @brief Set the PTCO field to a new value. */
+#define BW_GPIO_PCOR_PTCO(x, v) (HW_GPIO_PCOR_WR(x, v))
+/*@}*/
+
+/*******************************************************************************
+ * HW_GPIO_PTOR - Port Toggle Output Register
+ ******************************************************************************/
+
+/*!
+ * @brief HW_GPIO_PTOR - Port Toggle Output Register (WORZ)
+ *
+ * Reset value: 0x00000000U
+ */
+typedef union _hw_gpio_ptor
+{
+    uint32_t U;
+    struct _hw_gpio_ptor_bitfields
+    {
+        uint32_t PTTO : 32;            /*!< [31:0] Port Toggle Output */
+    } B;
+} hw_gpio_ptor_t;
+
+/*!
+ * @name Constants and macros for entire GPIO_PTOR register
+ */
+/*@{*/
+#define HW_GPIO_PTOR_ADDR(x)     ((x) + 0xCU)
+
+#define HW_GPIO_PTOR(x)          (*(__O hw_gpio_ptor_t *) HW_GPIO_PTOR_ADDR(x))
+#define HW_GPIO_PTOR_RD(x)       (HW_GPIO_PTOR(x).U)
+#define HW_GPIO_PTOR_WR(x, v)    (HW_GPIO_PTOR(x).U = (v))
+/*@}*/
+
+/*
+ * Constants & macros for individual GPIO_PTOR bitfields
+ */
+
+/*!
+ * @name Register GPIO_PTOR, field PTTO[31:0] (WORZ)
+ *
+ * Writing to this register will update the contents of the corresponding bit in
+ * the PDOR as follows:
+ *
+ * Values:
+ * - 0 - Corresponding bit in PDORn does not change.
+ * - 1 - Corresponding bit in PDORn is set to the inverse of its existing logic
+ *     state.
+ */
+/*@{*/
+#define BP_GPIO_PTOR_PTTO    (0U)          /*!< Bit position for GPIO_PTOR_PTTO. */
+#define BM_GPIO_PTOR_PTTO    (0xFFFFFFFFU) /*!< Bit mask for GPIO_PTOR_PTTO. */
+#define BS_GPIO_PTOR_PTTO    (32U)         /*!< Bit field size in bits for GPIO_PTOR_PTTO. */
+
+/*! @brief Format value for bitfield GPIO_PTOR_PTTO. */
+#define BF_GPIO_PTOR_PTTO(v) ((uint32_t)((uint32_t)(v) << BP_GPIO_PTOR_PTTO) & BM_GPIO_PTOR_PTTO)
+
+/*! @brief Set the PTTO field to a new value. */
+#define BW_GPIO_PTOR_PTTO(x, v) (HW_GPIO_PTOR_WR(x, v))
+/*@}*/
+
+/*******************************************************************************
+ * HW_GPIO_PDIR - Port Data Input Register
+ ******************************************************************************/
+
+/*!
+ * @brief HW_GPIO_PDIR - Port Data Input Register (RO)
+ *
+ * Reset value: 0x00000000U
+ *
+ * Do not modify pin configuration registers associated with pins not available
+ * in your selected package. All unbonded pins not available in your package will
+ * default to DISABLE state for lowest power consumption.
+ */
+typedef union _hw_gpio_pdir
+{
+    uint32_t U;
+    struct _hw_gpio_pdir_bitfields
+    {
+        uint32_t PDI : 32;             /*!< [31:0] Port Data Input */
+    } B;
+} hw_gpio_pdir_t;
+
+/*!
+ * @name Constants and macros for entire GPIO_PDIR register
+ */
+/*@{*/
+#define HW_GPIO_PDIR_ADDR(x)     ((x) + 0x10U)
+
+#define HW_GPIO_PDIR(x)          (*(__I hw_gpio_pdir_t *) HW_GPIO_PDIR_ADDR(x))
+#define HW_GPIO_PDIR_RD(x)       (HW_GPIO_PDIR(x).U)
+/*@}*/
+
+/*
+ * Constants & macros for individual GPIO_PDIR bitfields
+ */
+
+/*!
+ * @name Register GPIO_PDIR, field PDI[31:0] (RO)
+ *
+ * Reads 0 at the unimplemented pins for a particular device. Pins that are not
+ * configured for a digital function read 0. If the Port Control and Interrupt
+ * module is disabled, then the corresponding bit in PDIR does not update.
+ *
+ * Values:
+ * - 0 - Pin logic level is logic 0, or is not configured for use by digital
+ *     function.
+ * - 1 - Pin logic level is logic 1.
+ */
+/*@{*/
+#define BP_GPIO_PDIR_PDI     (0U)          /*!< Bit position for GPIO_PDIR_PDI. */
+#define BM_GPIO_PDIR_PDI     (0xFFFFFFFFU) /*!< Bit mask for GPIO_PDIR_PDI. */
+#define BS_GPIO_PDIR_PDI     (32U)         /*!< Bit field size in bits for GPIO_PDIR_PDI. */
+
+/*! @brief Read current value of the GPIO_PDIR_PDI field. */
+#define BR_GPIO_PDIR_PDI(x)  (HW_GPIO_PDIR(x).U)
+/*@}*/
+
+/*******************************************************************************
+ * HW_GPIO_PDDR - Port Data Direction Register
+ ******************************************************************************/
+
+/*!
+ * @brief HW_GPIO_PDDR - Port Data Direction Register (RW)
+ *
+ * Reset value: 0x00000000U
+ *
+ * The PDDR configures the individual port pins for input or output.
+ */
+typedef union _hw_gpio_pddr
+{
+    uint32_t U;
+    struct _hw_gpio_pddr_bitfields
+    {
+        uint32_t PDD : 32;             /*!< [31:0] Port Data Direction */
+    } B;
+} hw_gpio_pddr_t;
+
+/*!
+ * @name Constants and macros for entire GPIO_PDDR register
+ */
+/*@{*/
+#define HW_GPIO_PDDR_ADDR(x)     ((x) + 0x14U)
+
+#define HW_GPIO_PDDR(x)          (*(__IO hw_gpio_pddr_t *) HW_GPIO_PDDR_ADDR(x))
+#define HW_GPIO_PDDR_RD(x)       (HW_GPIO_PDDR(x).U)
+#define HW_GPIO_PDDR_WR(x, v)    (HW_GPIO_PDDR(x).U = (v))
+#define HW_GPIO_PDDR_SET(x, v)   (HW_GPIO_PDDR_WR(x, HW_GPIO_PDDR_RD(x) |  (v)))
+#define HW_GPIO_PDDR_CLR(x, v)   (HW_GPIO_PDDR_WR(x, HW_GPIO_PDDR_RD(x) & ~(v)))
+#define HW_GPIO_PDDR_TOG(x, v)   (HW_GPIO_PDDR_WR(x, HW_GPIO_PDDR_RD(x) ^  (v)))
+/*@}*/
+
+/*
+ * Constants & macros for individual GPIO_PDDR bitfields
+ */
+
+/*!
+ * @name Register GPIO_PDDR, field PDD[31:0] (RW)
+ *
+ * Configures individual port pins for input or output.
+ *
+ * Values:
+ * - 0 - Pin is configured as general-purpose input, for the GPIO function.
+ * - 1 - Pin is configured as general-purpose output, for the GPIO function.
+ */
+/*@{*/
+#define BP_GPIO_PDDR_PDD     (0U)          /*!< Bit position for GPIO_PDDR_PDD. */
+#define BM_GPIO_PDDR_PDD     (0xFFFFFFFFU) /*!< Bit mask for GPIO_PDDR_PDD. */
+#define BS_GPIO_PDDR_PDD     (32U)         /*!< Bit field size in bits for GPIO_PDDR_PDD. */
+
+/*! @brief Read current value of the GPIO_PDDR_PDD field. */
+#define BR_GPIO_PDDR_PDD(x)  (HW_GPIO_PDDR(x).U)
+
+/*! @brief Format value for bitfield GPIO_PDDR_PDD. */
+#define BF_GPIO_PDDR_PDD(v)  ((uint32_t)((uint32_t)(v) << BP_GPIO_PDDR_PDD) & BM_GPIO_PDDR_PDD)
+
+/*! @brief Set the PDD field to a new value. */
+#define BW_GPIO_PDDR_PDD(x, v) (HW_GPIO_PDDR_WR(x, v))
+/*@}*/
+
+/*******************************************************************************
+ * hw_gpio_t - module struct
+ ******************************************************************************/
+/*!
+ * @brief All GPIO module registers.
+ */
+#pragma pack(1)
+typedef struct _hw_gpio
+{
+    __IO hw_gpio_pdor_t PDOR;              /*!< [0x0] Port Data Output Register */
+    __O hw_gpio_psor_t PSOR;               /*!< [0x4] Port Set Output Register */
+    __O hw_gpio_pcor_t PCOR;               /*!< [0x8] Port Clear Output Register */
+    __O hw_gpio_ptor_t PTOR;               /*!< [0xC] Port Toggle Output Register */
+    __I hw_gpio_pdir_t PDIR;               /*!< [0x10] Port Data Input Register */
+    __IO hw_gpio_pddr_t PDDR;              /*!< [0x14] Port Data Direction Register */
+} hw_gpio_t;
+#pragma pack()
+
+/*! @brief Macro to access all GPIO registers. */
+/*! @param x GPIO module instance base address. */
+/*! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
+ *     use the '&' operator, like <code>&HW_GPIO(GPIOA_BASE)</code>. */
+#define HW_GPIO(x)     (*(hw_gpio_t *)(x))
+
+#endif /* __HW_GPIO_REGISTERS_H__ */
+/* EOF */