mbed - The official Mbed 2 C/C++ SDK provides the softwa…

Users » mbed_official » Code » mbed

mbed official / mbed

The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.

Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more

mbed 2

This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.

Diff: TARGET_DISCO_F303VC/TARGET_STM/TARGET_STM32F3/device/stm32f3xx_hal_dma.h

Revision:: 168:b9e159c1930a
Parent:: 163:e59c8e839560

--- a/TARGET_DISCO_F303VC/TARGET_STM/TARGET_STM32F3/device/stm32f3xx_hal_dma.h	Fri May 11 16:51:14 2018 +0100
+++ b/TARGET_DISCO_F303VC/TARGET_STM/TARGET_STM32F3/device/stm32f3xx_hal_dma.h	Thu May 24 15:35:55 2018 +0100
@@ -2,8 +2,6 @@
   ******************************************************************************
   * @file    stm32f3xx_hal_dma.h
   * @author  MCD Application Team
-  * @version V1.4.0
-  * @date    16-December-2016
   * @brief   Header file of DMA HAL module.
   ******************************************************************************
   * @attention
@@ -299,21 +297,21 @@
   */
 
 /** @brief  Reset DMA handle state
-  * @param  __HANDLE__: DMA handle.
+  * @param  __HANDLE__ DMA handle.
   * @retval None
   */
 #define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET)
 
 /**
   * @brief  Enable the specified DMA Channel.
-  * @param  __HANDLE__: DMA handle
+  * @param  __HANDLE__ DMA handle
   * @retval None
   */
 #define __HAL_DMA_ENABLE(__HANDLE__)        ((__HANDLE__)->Instance->CCR |= DMA_CCR_EN)
 
 /**
   * @brief  Disable the specified DMA Channel.
-  * @param  __HANDLE__: DMA handle
+  * @param  __HANDLE__ DMA handle
   * @retval None
   */
 #define __HAL_DMA_DISABLE(__HANDLE__)       ((__HANDLE__)->Instance->CCR &= ~DMA_CCR_EN)
@@ -323,8 +321,8 @@
 
 /**
   * @brief  Enables the specified DMA Channel interrupts.
-  * @param  __HANDLE__: DMA handle
-  * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. 
+  * @param  __HANDLE__ DMA handle
+  * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. 
   *          This parameter can be any combination of the following values:
   *            @arg DMA_IT_TC:  Transfer complete interrupt mask
   *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
@@ -335,8 +333,8 @@
 
 /**
   * @brief  Disables the specified DMA Channel interrupts.
-  * @param  __HANDLE__: DMA handle
-  * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. 
+  * @param  __HANDLE__ DMA handle
+  * @param __INTERRUPT__ specifies the DMA interrupt sources to be enabled or disabled. 
   *          This parameter can be any combination of the following values:
   *            @arg DMA_IT_TC:  Transfer complete interrupt mask
   *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
@@ -347,8 +345,8 @@
 
 /**
   * @brief  Checks whether the specified DMA Channel interrupt is enabled or disabled.
-  * @param  __HANDLE__: DMA handle
-  * @param  __INTERRUPT__: specifies the DMA interrupt source to check.
+  * @param  __HANDLE__ DMA handle
+  * @param  __INTERRUPT__ specifies the DMA interrupt source to check.
   *          This parameter can be one of the following values:
   *            @arg DMA_IT_TC:  Transfer complete interrupt mask
   *            @arg DMA_IT_HT:  Half transfer complete interrupt mask
@@ -359,7 +357,7 @@
 
 /**
   * @brief  Returns the number of remaining data units in the current DMAy Channelx transfer.
-  * @param  __HANDLE__: DMA handle
+  * @param  __HANDLE__ DMA handle
   *   
   * @retval The number of remaining data units in the current DMA Channel transfer.
   */