Diff: TARGET_WIO_BG96/TOOLCHAIN_IAR/stm32f4xx_hal_dma2d.h

Revision:

172:65be27845400

Parent:

171:3a7713b1edbc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIO_BG96/TOOLCHAIN_IAR/stm32f4xx_hal_dma2d.h	Wed Feb 20 20:53:29 2019 +0000
@@ -0,0 +1,575 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_dma2d.h
+  * @author  MCD Application Team
+  * @brief   Header file of DMA2D HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA2D_H
+#define __STM32F4xx_HAL_DMA2D_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F469xx) || defined(STM32F479xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup DMA2D DMA2D
+  * @brief DMA2D HAL module driver
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Types DMA2D Exported Types
+  * @{
+  */
+#define MAX_DMA2D_LAYER  2U
+
+/** 
+  * @brief DMA2D color Structure definition
+  */
+typedef struct
+{
+  uint32_t             Blue;               /*!< Configures the blue value.
+                                                This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint32_t             Green;              /*!< Configures the green value.
+                                                This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+  uint32_t             Red;                /*!< Configures the red value.
+                                                This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+} DMA2D_ColorTypeDef;
+
+/** 
+  * @brief DMA2D CLUT Structure definition
+  */
+typedef struct
+{
+  uint32_t             *pCLUT;             /*!< Configures the DMA2D CLUT memory address.*/
+
+  uint32_t             CLUTColorMode;      /*!< Configures the DMA2D CLUT color mode.
+                                                This parameter can be one value of @ref DMA2D_CLUT_CM. */
+
+  uint32_t             Size;               /*!< Configures the DMA2D CLUT size.
+                                                This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/
+} DMA2D_CLUTCfgTypeDef;
+
+/** 
+  * @brief DMA2D Init structure definition
+  */
+typedef struct
+{
+  uint32_t             Mode;               /*!< Configures the DMA2D transfer mode.
+                                                This parameter can be one value of @ref DMA2D_Mode. */
+
+  uint32_t             ColorMode;          /*!< Configures the color format of the output image.
+                                                This parameter can be one value of @ref DMA2D_Output_Color_Mode. */
+
+  uint32_t             OutputOffset;       /*!< Specifies the Offset value.
+                                                This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+
+} DMA2D_InitTypeDef;
+
+/** 
+  * @brief DMA2D Layer structure definition
+  */
+typedef struct
+{
+  uint32_t             InputOffset;        /*!< Configures the DMA2D foreground or background offset.
+                                                This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+                                           
+  uint32_t             InputColorMode;     /*!< Configures the DMA2D foreground or background color mode. 
+                                                This parameter can be one value of @ref DMA2D_Input_Color_Mode. */
+                                           
+  uint32_t             AlphaMode;          /*!< Configures the DMA2D foreground or background alpha mode.
+                                                This parameter can be one value of @ref DMA2D_Alpha_Mode. */
+                                           
+  uint32_t             InputAlpha;         /*!< Specifies the DMA2D foreground or background alpha value and color value in case of A8 or A4 color mode.
+                                                This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF except for the color modes detailed below.
+                                                @note In case of A8 or A4 color mode (ARGB), this parameter must be a number between 
+                                                Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF where
+                                                - InputAlpha[24:31] is the alpha value ALPHA[0:7]
+                                                - InputAlpha[16:23] is the red value RED[0:7]
+                                                - InputAlpha[8:15] is the green value GREEN[0:7]
+                                                - InputAlpha[0:7] is the blue value BLUE[0:7]. */
+  
+} DMA2D_LayerCfgTypeDef;
+
+/** 
+  * @brief  HAL DMA2D State structures definition
+  */
+typedef enum
+{
+  HAL_DMA2D_STATE_RESET             = 0x00U,    /*!< DMA2D not yet initialized or disabled       */
+  HAL_DMA2D_STATE_READY             = 0x01U,    /*!< Peripheral Initialized and ready for use    */
+  HAL_DMA2D_STATE_BUSY              = 0x02U,    /*!< An internal process is ongoing              */
+  HAL_DMA2D_STATE_TIMEOUT           = 0x03U,    /*!< Timeout state                               */
+  HAL_DMA2D_STATE_ERROR             = 0x04U,    /*!< DMA2D state error                           */
+  HAL_DMA2D_STATE_SUSPEND           = 0x05U     /*!< DMA2D process is suspended                  */
+}HAL_DMA2D_StateTypeDef;
+
+/**
+  * @brief  DMA2D handle Structure definition
+  */
+typedef struct __DMA2D_HandleTypeDef
+{
+  DMA2D_TypeDef               *Instance;                                                    /*!< DMA2D register base address.               */
+
+  DMA2D_InitTypeDef           Init;                                                         /*!< DMA2D communication parameters.            */
+
+  void                        (* XferCpltCallback)(struct __DMA2D_HandleTypeDef * hdma2d);  /*!< DMA2D transfer complete callback.          */
+
+  void                        (* XferErrorCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer error callback.             */
+
+  DMA2D_LayerCfgTypeDef       LayerCfg[MAX_DMA2D_LAYER];                                    /*!< DMA2D Layers parameters                    */
+
+  HAL_LockTypeDef             Lock;                                                         /*!< DMA2D lock.                                */
+
+  __IO HAL_DMA2D_StateTypeDef State;                                                        /*!< DMA2D transfer state.                      */
+
+  __IO uint32_t               ErrorCode;                                                    /*!< DMA2D error code.                          */
+} DMA2D_HandleTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Constants DMA2D Exported Constants
+  * @{
+  */
+
+/** @defgroup DMA2D_Error_Code DMA2D Error Code
+  * @{
+  */
+#define HAL_DMA2D_ERROR_NONE        0x00000000U              /*!< No error             */
+#define HAL_DMA2D_ERROR_TE          0x00000001U              /*!< Transfer error       */
+#define HAL_DMA2D_ERROR_CE          0x00000002U              /*!< Configuration error  */
+#define HAL_DMA2D_ERROR_CAE         0x00000004U              /*!< CLUT access error    */
+#define HAL_DMA2D_ERROR_TIMEOUT     0x00000020U              /*!< Timeout error        */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Mode DMA2D Mode 
+  * @{
+  */
+#define DMA2D_M2M                   0x00000000U              /*!< DMA2D memory to memory transfer mode                              */
+#define DMA2D_M2M_PFC               DMA2D_CR_MODE_0          /*!< DMA2D memory to memory with pixel format conversion transfer mode */
+#define DMA2D_M2M_BLEND             DMA2D_CR_MODE_1          /*!< DMA2D memory to memory with blending transfer mode                */
+#define DMA2D_R2M                   DMA2D_CR_MODE            /*!< DMA2D register to memory transfer mode                            */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Output_Color_Mode DMA2D Output Color Mode 
+  * @{
+  */
+#define DMA2D_OUTPUT_ARGB8888       0x00000000U                           /*!< ARGB8888 DMA2D color mode */
+#define DMA2D_OUTPUT_RGB888         DMA2D_OPFCCR_CM_0                     /*!< RGB888 DMA2D color mode   */
+#define DMA2D_OUTPUT_RGB565         DMA2D_OPFCCR_CM_1                     /*!< RGB565 DMA2D color mode   */
+#define DMA2D_OUTPUT_ARGB1555       (DMA2D_OPFCCR_CM_0|DMA2D_OPFCCR_CM_1) /*!< ARGB1555 DMA2D color mode */
+#define DMA2D_OUTPUT_ARGB4444       DMA2D_OPFCCR_CM_2                     /*!< ARGB4444 DMA2D color mode */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Input_Color_Mode DMA2D Input Color Mode
+  * @{
+  */
+#define DMA2D_INPUT_ARGB8888        0x00000000U              /*!< ARGB8888 color mode */
+#define DMA2D_INPUT_RGB888          0x00000001U              /*!< RGB888 color mode   */
+#define DMA2D_INPUT_RGB565          0x00000002U              /*!< RGB565 color mode   */
+#define DMA2D_INPUT_ARGB1555        0x00000003U              /*!< ARGB1555 color mode */
+#define DMA2D_INPUT_ARGB4444        0x00000004U              /*!< ARGB4444 color mode */
+#define DMA2D_INPUT_L8              0x00000005U              /*!< L8 color mode       */
+#define DMA2D_INPUT_AL44            0x00000006U              /*!< AL44 color mode     */
+#define DMA2D_INPUT_AL88            0x00000007U              /*!< AL88 color mode     */
+#define DMA2D_INPUT_L4              0x00000008U              /*!< L4 color mode       */
+#define DMA2D_INPUT_A8              0x00000009U              /*!< A8 color mode       */
+#define DMA2D_INPUT_A4              0x0000000AU              /*!< A4 color mode       */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Alpha_Mode DMA2D Alpha Mode
+  * @{
+  */
+#define DMA2D_NO_MODIF_ALPHA        0x00000000U              /*!< No modification of the alpha channel value                     */
+#define DMA2D_REPLACE_ALPHA         0x00000001U              /*!< Replace original alpha channel value by programmed alpha value */
+#define DMA2D_COMBINE_ALPHA         0x00000002U              /*!< Replace original alpha channel value by programmed alpha value
+                                                                  with original alpha channel value                                */
+/**
+  * @}
+  */ 
+
+/** @defgroup DMA2D_CLUT_CM DMA2D CLUT Color Mode
+  * @{
+  */
+#define DMA2D_CCM_ARGB8888          0x00000000U              /*!< ARGB8888 DMA2D CLUT color mode */
+#define DMA2D_CCM_RGB888            0x00000001U              /*!< RGB888 DMA2D CLUT color mode   */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Interrupts DMA2D Interrupts
+  * @{
+  */
+#define DMA2D_IT_CE                 DMA2D_CR_CEIE            /*!< Configuration Error Interrupt    */
+#define DMA2D_IT_CTC                DMA2D_CR_CTCIE           /*!< CLUT Transfer Complete Interrupt */
+#define DMA2D_IT_CAE                DMA2D_CR_CAEIE           /*!< CLUT Access Error Interrupt      */
+#define DMA2D_IT_TW                 DMA2D_CR_TWIE            /*!< Transfer Watermark Interrupt     */
+#define DMA2D_IT_TC                 DMA2D_CR_TCIE            /*!< Transfer Complete Interrupt      */
+#define DMA2D_IT_TE                 DMA2D_CR_TEIE            /*!< Transfer Error Interrupt         */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Flags DMA2D Flags
+  * @{
+  */
+#define DMA2D_FLAG_CE               DMA2D_ISR_CEIF           /*!< Configuration Error Interrupt Flag    */
+#define DMA2D_FLAG_CTC              DMA2D_ISR_CTCIF          /*!< CLUT Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_CAE              DMA2D_ISR_CAEIF          /*!< CLUT Access Error Interrupt Flag      */
+#define DMA2D_FLAG_TW               DMA2D_ISR_TWIF           /*!< Transfer Watermark Interrupt Flag     */
+#define DMA2D_FLAG_TC               DMA2D_ISR_TCIF           /*!< Transfer Complete Interrupt Flag      */
+#define DMA2D_FLAG_TE               DMA2D_ISR_TEIF           /*!< Transfer Error Interrupt Flag         */
+/**
+  * @}
+  */
+  
+/** @defgroup DMA2D_Aliases DMA2D API Aliases
+  * @{
+  */
+#define HAL_DMA2D_DisableCLUT       HAL_DMA2D_CLUTLoading_Abort    /*!< Aliased to HAL_DMA2D_CLUTLoading_Abort for compatibility with legacy code */
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */
+/* Exported macros ------------------------------------------------------------*/
+/** @defgroup DMA2D_Exported_Macros DMA2D Exported Macros
+  * @{
+  */
+
+/** @brief Reset DMA2D handle state
+  * @param  __HANDLE__ specifies the DMA2D handle.
+  * @retval None
+  */
+#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET)
+
+/**
+  * @brief  Enable the DMA2D.
+  * @param  __HANDLE__ DMA2D handle
+  * @retval None.
+  */
+#define __HAL_DMA2D_ENABLE(__HANDLE__)  ((__HANDLE__)->Instance->CR |= DMA2D_CR_START)
+
+/* Interrupt & Flag management */
+/**
+  * @brief  Get the DMA2D pending flags.
+  * @param  __HANDLE__ DMA2D handle
+  * @param  __FLAG__ flag to check.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_FLAG_CE:  Configuration error flag
+  *            @arg DMA2D_FLAG_CTC: CLUT transfer complete flag
+  *            @arg DMA2D_FLAG_CAE: CLUT access error flag
+  *            @arg DMA2D_FLAG_TW:  Transfer Watermark flag
+  *            @arg DMA2D_FLAG_TC:  Transfer complete flag
+  *            @arg DMA2D_FLAG_TE:  Transfer error flag   
+  * @retval The state of FLAG.
+  */
+#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+  * @brief  Clear the DMA2D pending flags.
+  * @param  __HANDLE__ DMA2D handle
+  * @param  __FLAG__ specifies the flag to clear.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_FLAG_CE:  Configuration error flag
+  *            @arg DMA2D_FLAG_CTC: CLUT transfer complete flag
+  *            @arg DMA2D_FLAG_CAE: CLUT access error flag
+  *            @arg DMA2D_FLAG_TW:  Transfer Watermark flag
+  *            @arg DMA2D_FLAG_TC:  Transfer complete flag
+  *            @arg DMA2D_FLAG_TE:  Transfer error flag
+  * @retval None
+  */
+#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__))
+
+/**
+  * @brief  Enable the specified DMA2D interrupts.
+  * @param  __HANDLE__ DMA2D handle
+  * @param __INTERRUPT__ specifies the DMA2D interrupt sources to be enabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_IT_CE:  Configuration error interrupt mask
+  *            @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
+  *            @arg DMA2D_IT_CAE: CLUT access error interrupt mask
+  *            @arg DMA2D_IT_TW:  Transfer Watermark interrupt mask
+  *            @arg DMA2D_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA2D_IT_TE:  Transfer error interrupt mask
+  * @retval None
+  */
+#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+  * @brief  Disable the specified DMA2D interrupts.
+  * @param  __HANDLE__ DMA2D handle
+  * @param __INTERRUPT__ specifies the DMA2D interrupt sources to be disabled.
+  *          This parameter can be any combination of the following values:
+  *            @arg DMA2D_IT_CE:  Configuration error interrupt mask
+  *            @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
+  *            @arg DMA2D_IT_CAE: CLUT access error interrupt mask
+  *            @arg DMA2D_IT_TW:  Transfer Watermark interrupt mask
+  *            @arg DMA2D_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA2D_IT_TE:  Transfer error interrupt mask
+  * @retval None
+  */
+#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+  * @brief  Check whether the specified DMA2D interrupt source is enabled or not.
+  * @param  __HANDLE__ DMA2D handle
+  * @param  __INTERRUPT__ specifies the DMA2D interrupt source to check.
+  *          This parameter can be one of the following values:
+  *            @arg DMA2D_IT_CE:  Configuration error interrupt mask
+  *            @arg DMA2D_IT_CTC: CLUT transfer complete interrupt mask
+  *            @arg DMA2D_IT_CAE: CLUT access error interrupt mask
+  *            @arg DMA2D_IT_TW:  Transfer Watermark interrupt mask
+  *            @arg DMA2D_IT_TC:  Transfer complete interrupt mask
+  *            @arg DMA2D_IT_TE:  Transfer error interrupt mask
+  * @retval The state of INTERRUPT source.
+  */
+#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup DMA2D_Exported_Functions DMA2D Exported Functions
+  * @{
+  */
+
+/** @addtogroup DMA2D_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+
+/* Initialization and de-initialization functions *******************************/
+HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d);
+void              HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d);
+void              HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d);
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMA2D_Exported_Functions_Group2 IO operation functions
+  * @{
+  */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width,  uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height);
+HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoad(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoad_IT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Abort(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Suspend(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_CLUTLoading_Resume(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout);
+void              HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d);
+void              HAL_DMA2D_LineEventCallback(DMA2D_HandleTypeDef *hdma2d);
+void              HAL_DMA2D_CLUTLoadingCpltCallback(DMA2D_HandleTypeDef *hdma2d);
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMA2D_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line);
+HAL_StatusTypeDef HAL_DMA2D_EnableDeadTime(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_DisableDeadTime(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_ConfigDeadTime(DMA2D_HandleTypeDef *hdma2d, uint8_t DeadTime);
+
+/**
+  * @}
+  */
+
+/** @addtogroup DMA2D_Exported_Functions_Group4 Peripheral State and Error functions
+  * @{
+  */
+
+/* Peripheral State functions ***************************************************/
+HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);
+uint32_t               HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private constants ---------------------------------------------------------*/
+  
+/** @addtogroup DMA2D_Private_Constants DMA2D Private Constants
+  * @{
+  */
+
+/** @defgroup DMA2D_Maximum_Line_WaterMark DMA2D Maximum Line Watermark 
+  * @{
+  */
+#define DMA2D_LINE_WATERMARK_MAX         DMA2D_LWR_LW            /*!< DMA2D maximum line watermark */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Color_Value DMA2D Color Value
+  * @{
+  */
+#define DMA2D_COLOR_VALUE                 0x000000FFU            /*!< Color value mask */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Max_Layer DMA2D Maximum Number of Layers
+  * @{
+  */
+#define DMA2D_MAX_LAYER                   2U                     /*!< DMA2D maximum number of layers */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_Offset DMA2D Offset
+  * @{
+  */
+#define DMA2D_OFFSET                      DMA2D_FGOR_LO          /*!< Line Offset */
+/**
+  * @}
+  */ 
+
+/** @defgroup DMA2D_Size DMA2D Size
+  * @{
+  */
+#define DMA2D_PIXEL                       (DMA2D_NLR_PL >> 16U)  /*!< DMA2D number of pixels per line */
+#define DMA2D_LINE                        DMA2D_NLR_NL           /*!< DMA2D number of lines           */
+/**
+  * @}
+  */
+
+/** @defgroup DMA2D_CLUT_Size DMA2D CLUT Size
+  * @{
+  */
+#define DMA2D_CLUT_SIZE                   (DMA2D_FGPFCCR_CS >> 8U)  /*!< DMA2D CLUT size */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup DMA2D_Private_Macros DMA2D Private Macros
+  * @{
+  */
+#define IS_DMA2D_LAYER(LAYER)                 ((LAYER) <= DMA2D_MAX_LAYER)
+#define IS_DMA2D_MODE(MODE)                   (((MODE) == DMA2D_M2M)       || ((MODE) == DMA2D_M2M_PFC) || \
+                                               ((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))
+#define IS_DMA2D_CMODE(MODE_ARGB)             (((MODE_ARGB) == DMA2D_OUTPUT_ARGB8888) || ((MODE_ARGB) == DMA2D_OUTPUT_RGB888)   || \
+                                               ((MODE_ARGB) == DMA2D_OUTPUT_RGB565)   || ((MODE_ARGB) == DMA2D_OUTPUT_ARGB1555) || \
+                                               ((MODE_ARGB) == DMA2D_OUTPUT_ARGB4444))
+#define IS_DMA2D_COLOR(COLOR)                 ((COLOR) <= DMA2D_COLOR_VALUE)
+#define IS_DMA2D_LINE(LINE)                   ((LINE) <= DMA2D_LINE)
+#define IS_DMA2D_PIXEL(PIXEL)                 ((PIXEL) <= DMA2D_PIXEL)
+#define IS_DMA2D_OFFSET(OOFFSET)              ((OOFFSET) <= DMA2D_OFFSET)
+#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM)   (((INPUT_CM) == DMA2D_INPUT_ARGB8888) || ((INPUT_CM) == DMA2D_INPUT_RGB888)   || \
+                                               ((INPUT_CM) == DMA2D_INPUT_RGB565)   || ((INPUT_CM) == DMA2D_INPUT_ARGB1555) || \
+                                               ((INPUT_CM) == DMA2D_INPUT_ARGB4444) || ((INPUT_CM) == DMA2D_INPUT_L8)       || \
+                                               ((INPUT_CM) == DMA2D_INPUT_AL44)     || ((INPUT_CM) == DMA2D_INPUT_AL88)     || \
+                                               ((INPUT_CM) == DMA2D_INPUT_L4)       || ((INPUT_CM) == DMA2D_INPUT_A8)       || \
+                                               ((INPUT_CM) == DMA2D_INPUT_A4))
+#define IS_DMA2D_ALPHA_MODE(AlphaMode)        (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \
+                                               ((AlphaMode) == DMA2D_REPLACE_ALPHA)  || \
+                                               ((AlphaMode) == DMA2D_COMBINE_ALPHA))
+
+#define IS_DMA2D_CLUT_CM(CLUT_CM)             (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888))
+#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE)         ((CLUT_SIZE) <= DMA2D_CLUT_SIZE)
+#define IS_DMA2D_LINEWATERMARK(LineWatermark) ((LineWatermark) <= DMA2D_LINE_WATERMARK_MAX)
+#define IS_DMA2D_IT(IT)                       (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \
+                                               ((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \
+                                               ((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE))
+#define IS_DMA2D_GET_FLAG(FLAG)               (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \
+                                               ((FLAG) == DMA2D_FLAG_TW)   || ((FLAG) == DMA2D_FLAG_TC)  || \
+                                               ((FLAG) == DMA2D_FLAG_TE)   || ((FLAG) == DMA2D_FLAG_CE))
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* STM32F427xx || STM32F437xx  || STM32F429xx || STM32F439xx || STM32F469xx || STM32F479xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DMA2D_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/