Diff: TARGET_WIO_BG96/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pcd.h

Revision:

172:65be27845400

Parent:

171:3a7713b1edbc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_WIO_BG96/TOOLCHAIN_GCC_ARM/stm32f4xx_hal_pcd.h	Wed Feb 20 20:53:29 2019 +0000
@@ -0,0 +1,352 @@
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_pcd.h
+  * @author  MCD Application Team
+  * @brief   Header file of PCD HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_PCD_H
+#define __STM32F4xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
+    defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) || \
+    defined(STM32F469xx) || defined(STM32F479xx) || defined(STM32F412Zx) || defined(STM32F412Vx) || \
+    defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_ll_usb.h"
+   
+/** @addtogroup STM32F4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PCD
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup PCD_Exported_Types PCD Exported Types
+  * @{
+  */
+   
+/**
+  * @brief  PCD State structure definition
+  */
+typedef enum 
+{
+  HAL_PCD_STATE_RESET   = 0x00U,
+  HAL_PCD_STATE_READY   = 0x01U,
+  HAL_PCD_STATE_ERROR   = 0x02U,
+  HAL_PCD_STATE_BUSY    = 0x03U,
+  HAL_PCD_STATE_TIMEOUT = 0x04U
+} PCD_StateTypeDef;
+
+#ifdef USB_OTG_GLPMCFG_LPMEN
+/* Device LPM suspend state */
+typedef enum  
+{
+  LPM_L0 = 0x00U, /* on */
+  LPM_L1 = 0x01U, /* LPM L1 sleep */
+  LPM_L2 = 0x02U, /* suspend */
+  LPM_L3 = 0x03U  /* off */
+}PCD_LPM_StateTypeDef;
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+
+typedef USB_OTG_GlobalTypeDef  PCD_TypeDef;
+typedef USB_OTG_CfgTypeDef     PCD_InitTypeDef;
+typedef USB_OTG_EPTypeDef      PCD_EPTypeDef ;
+
+/** 
+  * @brief  PCD Handle Structure definition  
+  */
+
+/* MBED */
+typedef struct
+{
+	HAL_LockTypeDef Lock;
+} PCD_EPLockDef;
+/* MBED */
+
+typedef struct
+{
+  PCD_TypeDef             *Instance;    /*!< Register base address              */
+  PCD_InitTypeDef         Init;         /*!< PCD required parameters            */
+  PCD_EPTypeDef           IN_ep[16U];   /*!< IN endpoint parameters             */
+  PCD_EPTypeDef           OUT_ep[16U];  /*!< OUT endpoint parameters            */
+  HAL_LockTypeDef		  Lock;			/*!< PCD peripheral status              */
+/* MBED */
+  PCD_EPLockDef           EPLock[15];   /*!< PCD endpoint peripheral status     */
+/* MBED */
+  __IO PCD_StateTypeDef   State;        /*!< PCD communication state            */
+  uint32_t                Setup[12U];   /*!< Setup packet buffer                */
+#ifdef USB_OTG_GLPMCFG_LPMEN
+  PCD_LPM_StateTypeDef    LPM_State;    /*!< LPM State                          */
+  uint32_t                BESL;
+  uint32_t                lpm_active;   /*!< Enable or disable the Link Power Management .
+                                        This parameter can be set to ENABLE or DISABLE */
+#endif /* USB_OTG_GLPMCFG_LPMEN */
+#ifdef USB_OTG_GCCFG_BCDEN
+  uint32_t battery_charging_active;     /*!< Enable or disable Battery charging.
+                                        This parameter can be set to ENABLE or DISABLE */
+#endif /* USB_OTG_GCCFG_BCDEN */
+  void                    *pData;       /*!< Pointer to upper stack Handler */
+} PCD_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Include PCD HAL Extension module */
+#include "stm32f4xx_hal_pcd_ex.h"
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+  * @{
+  */
+
+/** @defgroup PCD_Speed PCD Speed
+  * @{
+  */
+#define PCD_SPEED_HIGH               0U
+#define PCD_SPEED_HIGH_IN_FULL       1U
+#define PCD_SPEED_FULL               2U
+/**
+  * @}
+  */
+  
+/** @defgroup PCD_PHY_Module PCD PHY Module
+  * @{
+  */
+#define PCD_PHY_ULPI                 1U
+#define PCD_PHY_EMBEDDED             2U
+/**
+  * @}
+  */
+  
+/** @defgroup PCD_Turnaround_Timeout Turnaround Timeout Value
+  * @{
+  */
+#ifndef USBD_HS_TRDT_VALUE
+ #define USBD_HS_TRDT_VALUE           9U
+#endif /* USBD_HS_TRDT_VALUE */
+#ifndef USBD_FS_TRDT_VALUE
+ #define USBD_FS_TRDT_VALUE           5U
+#endif /* USBD_FS_TRDT_VALUE */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ *  @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_ENABLE(__HANDLE__)                   USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__)                  USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__)      ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__))
+#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__)         (USB_ReadInterrupts((__HANDLE__)->Instance) == 0U)
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__)             *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
+                                                           ~(USB_OTG_PCGCCTL_STOPCLK)
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__)               *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__)            ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10U)
+
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE                0x08U 
+#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE               0x0CU 
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE        0x10U 
+
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE                0x08U 
+#define USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE               0x0CU 
+#define USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE        0x10U 
+
+#define USB_OTG_HS_WAKEUP_EXTI_LINE              0x00100000U  /*!< External interrupt line 20 Connected to the USB HS EXTI Line */
+#define USB_OTG_FS_WAKEUP_EXTI_LINE              0x00040000U  /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT()    EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT()   EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG()     EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG()   EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() do{EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+                                                             EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+                                                            }while(0U)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() do{EXTI->FTSR |= (USB_OTG_HS_WAKEUP_EXTI_LINE);\
+                                                              EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+                                                             }while(0U) 
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() do{EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+                                                                     EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\
+                                                                     EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+                                                                     EXTI->FTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\
+                                                                    }while(0U)
+
+#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT()   (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE) 
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT()    EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT()   EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG()     EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG()   EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() do{EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                             EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+                                                            }while(0U)  
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE()  do{EXTI->FTSR |= (USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                               EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                              }while(0U)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE()  do{EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                                      EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+                                                                      EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+                                                                      EXTI->FTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+                                                                     }while(0U) 
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT()  (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE)
+/**
+  * @}
+  */ 
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCD_Exported_Functions PCD Exported Functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  ********************************/
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/* I/O operation functions  ***************************************************/
+/* Non-Blocking mode: Interrupt */
+/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
+  * @{
+  */
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  **********************************************/
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+  * @{
+  */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t          HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  ************************************************/
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+  * @{
+  */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+ 
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @{
+ */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||
+          STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx || STM32F469xx || STM32F479xx || STM32F412Zx || STM32F412Rx ||
+          STM32F412Vx || STM32F412Cx || STM32F413xx || STM32F423xx */
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F4xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/