mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_H743ZI/TOOLCHAIN_ARM_STD/stm32h7xx_hal_sd.h
- Revision:
- 172:65be27845400
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_H743ZI/TOOLCHAIN_ARM_STD/stm32h7xx_hal_sd.h Wed Feb 20 20:53:29 2019 +0000
@@ -0,0 +1,803 @@
+/**
+ ******************************************************************************
+ * @file stm32h7xx_hal_sd.h
+ * @author MCD Application Team
+ * @brief Header file of SD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ *
+ * This software component is licensed by ST under BSD 3-Clause license,
+ * the "License"; You may not use this file except in compliance with the
+ * License. You may obtain a copy of the License at:
+ * opensource.org/licenses/BSD-3-Clause
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef STM32H7xx_HAL_SD_H
+#define STM32H7xx_HAL_SD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32h7xx_ll_sdmmc.h"
+#if defined (DLYB_SDMMC1) || defined (DLYB_SDMMC2) || defined (DLYB_SDMMC3)
+#include "stm32h7xx_ll_delayblock.h"
+#endif /* (DLYB_SDMMC1) || (DLYB_SDMMC2) */
+
+/** @addtogroup STM32H7xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup SD SD
+ * @brief SD HAL module driver
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SD_Exported_Types SD Exported Types
+ * @{
+ */
+
+/** @defgroup SD_Exported_Types_Group1 SD State enumeration structure
+ * @{
+ */
+typedef enum
+{
+ HAL_SD_STATE_RESET = ((uint32_t)0x00000000U), /*!< SD not yet initialized or disabled */
+ HAL_SD_STATE_READY = ((uint32_t)0x00000001U), /*!< SD initialized and ready for use */
+ HAL_SD_STATE_TIMEOUT = ((uint32_t)0x00000002U), /*!< SD Timeout state */
+ HAL_SD_STATE_BUSY = ((uint32_t)0x00000003U), /*!< SD process ongoing */
+ HAL_SD_STATE_PROGRAMMING = ((uint32_t)0x00000004U), /*!< SD Programming State */
+ HAL_SD_STATE_RECEIVING = ((uint32_t)0x00000005U), /*!< SD Receiving State */
+ HAL_SD_STATE_TRANSFER = ((uint32_t)0x00000006U), /*!< SD Transfert State */
+ HAL_SD_STATE_ERROR = ((uint32_t)0x0000000FU) /*!< SD is in error state */
+}HAL_SD_StateTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group2 SD Card State enumeration structure
+ * @{
+ */
+typedef uint32_t HAL_SD_CardStateTypedef;
+
+#define HAL_SD_CARD_READY 0x00000001U /*!< Card state is ready */
+#define HAL_SD_CARD_IDENTIFICATION 0x00000002U /*!< Card is in identification state */
+#define HAL_SD_CARD_STANDBY 0x00000003U /*!< Card is in standby state */
+#define HAL_SD_CARD_TRANSFER 0x00000004U /*!< Card is in transfer state */
+#define HAL_SD_CARD_SENDING 0x00000005U /*!< Card is sending an operation */
+#define HAL_SD_CARD_RECEIVING 0x00000006U /*!< Card is receiving operation information */
+#define HAL_SD_CARD_PROGRAMMING 0x00000007U /*!< Card is in programming state */
+#define HAL_SD_CARD_DISCONNECTED 0x00000008U /*!< Card is disconnected */
+#define HAL_SD_CARD_ERROR 0x000000FFU /*!< Card response Error */
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group3 SD Handle Structure definition
+ * @{
+ */
+#define SD_InitTypeDef SDMMC_InitTypeDef
+#define SD_TypeDef SDMMC_TypeDef
+
+/**
+ * @brief SD Card Information Structure definition
+ */
+typedef struct
+{
+ uint32_t CardType; /*!< Specifies the card Type */
+
+ uint32_t CardVersion; /*!< Specifies the card version */
+
+ uint32_t Class; /*!< Specifies the class of the card class */
+
+ uint32_t RelCardAdd; /*!< Specifies the Relative Card Address */
+
+ uint32_t BlockNbr; /*!< Specifies the Card Capacity in blocks */
+
+ uint32_t BlockSize; /*!< Specifies one block size in bytes */
+
+ uint32_t LogBlockNbr; /*!< Specifies the Card logical Capacity in blocks */
+
+ uint32_t LogBlockSize; /*!< Specifies logical block size in bytes */
+
+ uint32_t CardSpeed; /*!< Specifies the card Speed */
+
+}HAL_SD_CardInfoTypeDef;
+
+/**
+ * @brief SD handle Structure definition
+ */
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+typedef struct __SD_HandleTypeDef
+#else
+typedef struct
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+{
+ SD_TypeDef *Instance; /*!< SD registers base address */
+
+ SD_InitTypeDef Init; /*!< SD required parameters */
+
+ HAL_LockTypeDef Lock; /*!< SD locking object */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to SD Tx transfer Buffer */
+
+ uint32_t TxXferSize; /*!< SD Tx Transfer size */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to SD Rx transfer Buffer */
+
+ uint32_t RxXferSize; /*!< SD Rx Transfer size */
+
+ __IO uint32_t Context; /*!< SD transfer context */
+
+ __IO HAL_SD_StateTypeDef State; /*!< SD card State */
+
+ __IO uint32_t ErrorCode; /*!< SD Card Error codes */
+
+ HAL_SD_CardInfoTypeDef SdCard; /*!< SD Card information */
+
+ uint32_t CSD[4]; /*!< SD card specific data table */
+
+ uint32_t CID[4]; /*!< SD card identification number table */
+
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+ void (* TxCpltCallback) (struct __SD_HandleTypeDef *hsd);
+ void (* RxCpltCallback) (struct __SD_HandleTypeDef *hsd);
+ void (* ErrorCallback) (struct __SD_HandleTypeDef *hsd);
+ void (* AbortCpltCallback) (struct __SD_HandleTypeDef *hsd);
+ void (* Read_DMADblBuf0CpltCallback) (struct __SD_HandleTypeDef *hsd);
+ void (* Read_DMADblBuf1CpltCallback) (struct __SD_HandleTypeDef *hsd);
+ void (* Write_DMADblBuf0CpltCallback) (struct __SD_HandleTypeDef *hsd);
+ void (* Write_DMADblBuf1CpltCallback) (struct __SD_HandleTypeDef *hsd);
+
+#if (USE_SD_TRANSCEIVER != 0U)
+ void (* DriveTransceiver_1_8V_Callback) (FlagStatus status);
+#endif /* USE_SD_TRANSCEIVER */
+
+ void (* MspInitCallback) (struct __SD_HandleTypeDef *hsd);
+ void (* MspDeInitCallback) (struct __SD_HandleTypeDef *hsd);
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+}SD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group4 Card Specific Data: CSD Register
+ * @{
+ */
+typedef struct
+{
+ __IO uint8_t CSDStruct; /*!< CSD structure */
+ __IO uint8_t SysSpecVersion; /*!< System specification version */
+ __IO uint8_t Reserved1; /*!< Reserved */
+ __IO uint8_t TAAC; /*!< Data read access time 1 */
+ __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */
+ __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */
+ __IO uint16_t CardComdClasses; /*!< Card command classes */
+ __IO uint8_t RdBlockLen; /*!< Max. read data block length */
+ __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */
+ __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */
+ __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */
+ __IO uint8_t DSRImpl; /*!< DSR implemented */
+ __IO uint8_t Reserved2; /*!< Reserved */
+ __IO uint32_t DeviceSize; /*!< Device Size */
+ __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */
+ __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */
+ __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */
+ __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */
+ __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */
+ __IO uint8_t EraseGrSize; /*!< Erase group size */
+ __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */
+ __IO uint8_t WrProtectGrSize; /*!< Write protect group size */
+ __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */
+ __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */
+ __IO uint8_t WrSpeedFact; /*!< Write speed factor */
+ __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */
+ __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */
+ __IO uint8_t Reserved3; /*!< Reserved */
+ __IO uint8_t ContentProtectAppli; /*!< Content protection application */
+ __IO uint8_t FileFormatGroup; /*!< File format group */
+ __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */
+ __IO uint8_t PermWrProtect; /*!< Permanent write protection */
+ __IO uint8_t TempWrProtect; /*!< Temporary write protection */
+ __IO uint8_t FileFormat; /*!< File format */
+ __IO uint8_t ECC; /*!< ECC code */
+ __IO uint8_t CSD_CRC; /*!< CSD CRC */
+ __IO uint8_t Reserved4; /*!< Always 1 */
+}HAL_SD_CardCSDTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group5 Card Identification Data: CID Register
+ * @{
+ */
+typedef struct
+{
+ __IO uint8_t ManufacturerID; /*!< Manufacturer ID */
+ __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */
+ __IO uint32_t ProdName1; /*!< Product Name part1 */
+ __IO uint8_t ProdName2; /*!< Product Name part2 */
+ __IO uint8_t ProdRev; /*!< Product Revision */
+ __IO uint32_t ProdSN; /*!< Product Serial Number */
+ __IO uint8_t Reserved1; /*!< Reserved1 */
+ __IO uint16_t ManufactDate; /*!< Manufacturing Date */
+ __IO uint8_t CID_CRC; /*!< CID CRC */
+ __IO uint8_t Reserved2; /*!< Always 1 */
+
+}HAL_SD_CardCIDTypedef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group6 SD Card Status returned by ACMD13
+ * @{
+ */
+typedef struct
+{
+ __IO uint8_t DataBusWidth; /*!< Shows the currently defined data bus width */
+ __IO uint8_t SecuredMode; /*!< Card is in secured mode of operation */
+ __IO uint16_t CardType; /*!< Carries information about card type */
+ __IO uint32_t ProtectedAreaSize; /*!< Carries information about the capacity of protected area */
+ __IO uint8_t SpeedClass; /*!< Carries information about the speed class of the card */
+ __IO uint8_t PerformanceMove; /*!< Carries information about the card's performance move */
+ __IO uint8_t AllocationUnitSize; /*!< Carries information about the card's allocation unit size */
+ __IO uint16_t EraseSize; /*!< Determines the number of AUs to be erased in one operation */
+ __IO uint8_t EraseTimeout; /*!< Determines the timeout for any number of AU erase */
+ __IO uint8_t EraseOffset; /*!< Carries information about the erase offset */
+ __IO uint8_t UhsSpeedGrade; /*!< Carries information about the speed grade of UHS card */
+ __IO uint8_t UhsAllocationUnitSize; /*!< Carries information about the UHS card's allocation unit size */
+ __IO uint8_t VideoSpeedClass; /*!< Carries information about the Video Speed Class of UHS card */
+}HAL_SD_CardStatusTypedef;
+/**
+ * @}
+ */
+
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+/** @defgroup SD_Exported_Types_Group7 SD Callback ID enumeration definition
+ * @{
+ */
+typedef enum
+{
+ HAL_SD_TX_CPLT_CB_ID = 0x00U, /*!< SD Tx Complete Callback ID */
+ HAL_SD_RX_CPLT_CB_ID = 0x01U, /*!< SD Rx Complete Callback ID */
+ HAL_SD_ERROR_CB_ID = 0x02U, /*!< SD Error Callback ID */
+ HAL_SD_ABORT_CB_ID = 0x03U, /*!< SD Abort Callback ID */
+ HAL_SD_READ_DMA_DBL_BUF0_CPLT_CB_ID = 0x04U, /*!< SD Rx DMA Double Buffer 0 Complete Callback ID */
+ HAL_SD_READ_DMA_DBL_BUF1_CPLT_CB_ID = 0x05U, /*!< SD Rx DMA Double Buffer 1 Complete Callback ID */
+ HAL_SD_WRITE_DMA_DBL_BUF0_CPLT_CB_ID = 0x06U, /*!< SD Tx DMA Double Buffer 0 Complete Callback ID */
+ HAL_SD_WRITE_DMA_DBL_BUF1_CPLT_CB_ID = 0x07U, /*!< SD Tx DMA Double Buffer 1 Complete Callback ID */
+
+ HAL_SD_MSP_INIT_CB_ID = 0x10U, /*!< SD MspInit Callback ID */
+ HAL_SD_MSP_DEINIT_CB_ID = 0x11U /*!< SD MspDeInit Callback ID */
+}HAL_SD_CallbackIDTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Types_Group8 SD Callback pointer definition
+ * @{
+ */
+typedef void (*pSD_CallbackTypeDef) (SD_HandleTypeDef *hsd);
+#if (USE_SD_TRANSCEIVER != 0U)
+typedef void (*pSD_TransceiverCallbackTypeDef)(FlagStatus status);
+#endif /* USE_SD_TRANSCEIVER */
+/**
+ * @}
+ */
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SD_Exported_Constants Exported Constants
+ * @{
+ */
+
+#define BLOCKSIZE ((uint32_t)512U) /*!< Block size is 512 bytes */
+
+/** @defgroup SD_Exported_Constansts_Group1 SD Error status enumeration Structure definition
+ * @{
+ */
+#define HAL_SD_ERROR_NONE SDMMC_ERROR_NONE /*!< No error */
+#define HAL_SD_ERROR_CMD_CRC_FAIL SDMMC_ERROR_CMD_CRC_FAIL /*!< Command response received (but CRC check failed) */
+#define HAL_SD_ERROR_DATA_CRC_FAIL SDMMC_ERROR_DATA_CRC_FAIL /*!< Data block sent/received (CRC check failed) */
+#define HAL_SD_ERROR_CMD_RSP_TIMEOUT SDMMC_ERROR_CMD_RSP_TIMEOUT /*!< Command response timeout */
+#define HAL_SD_ERROR_DATA_TIMEOUT SDMMC_ERROR_DATA_TIMEOUT /*!< Data timeout */
+#define HAL_SD_ERROR_TX_UNDERRUN SDMMC_ERROR_TX_UNDERRUN /*!< Transmit FIFO underrun */
+#define HAL_SD_ERROR_RX_OVERRUN SDMMC_ERROR_RX_OVERRUN /*!< Receive FIFO overrun */
+#define HAL_SD_ERROR_ADDR_MISALIGNED SDMMC_ERROR_ADDR_MISALIGNED /*!< Misaligned address */
+#define HAL_SD_ERROR_BLOCK_LEN_ERR SDMMC_ERROR_BLOCK_LEN_ERR /*!< Transferred block length is not allowed for the card or the
+ number of transferred bytes does not match the block length */
+#define HAL_SD_ERROR_ERASE_SEQ_ERR SDMMC_ERROR_ERASE_SEQ_ERR /*!< An error in the sequence of erase command occurs */
+#define HAL_SD_ERROR_BAD_ERASE_PARAM SDMMC_ERROR_BAD_ERASE_PARAM /*!< An invalid selection for erase groups */
+#define HAL_SD_ERROR_WRITE_PROT_VIOLATION SDMMC_ERROR_WRITE_PROT_VIOLATION /*!< Attempt to program a write protect block */
+#define HAL_SD_ERROR_LOCK_UNLOCK_FAILED SDMMC_ERROR_LOCK_UNLOCK_FAILED /*!< Sequence or password error has been detected in unlock
+ command or if there was an attempt to access a locked card */
+#define HAL_SD_ERROR_COM_CRC_FAILED SDMMC_ERROR_COM_CRC_FAILED /*!< CRC check of the previous command failed */
+#define HAL_SD_ERROR_ILLEGAL_CMD SDMMC_ERROR_ILLEGAL_CMD /*!< Command is not legal for the card state */
+#define HAL_SD_ERROR_CARD_ECC_FAILED SDMMC_ERROR_CARD_ECC_FAILED /*!< Card internal ECC was applied but failed to correct the data */
+#define HAL_SD_ERROR_CC_ERR SDMMC_ERROR_CC_ERR /*!< Internal card controller error */
+#define HAL_SD_ERROR_GENERAL_UNKNOWN_ERR SDMMC_ERROR_GENERAL_UNKNOWN_ERR /*!< General or unknown error */
+#define HAL_SD_ERROR_STREAM_READ_UNDERRUN SDMMC_ERROR_STREAM_READ_UNDERRUN /*!< The card could not sustain data reading in stream rmode */
+#define HAL_SD_ERROR_STREAM_WRITE_OVERRUN SDMMC_ERROR_STREAM_WRITE_OVERRUN /*!< The card could not sustain data programming in stream mode */
+#define HAL_SD_ERROR_CID_CSD_OVERWRITE SDMMC_ERROR_CID_CSD_OVERWRITE /*!< CID/CSD overwrite error */
+#define HAL_SD_ERROR_WP_ERASE_SKIP SDMMC_ERROR_WP_ERASE_SKIP /*!< Only partial address space was erased */
+#define HAL_SD_ERROR_CARD_ECC_DISABLED SDMMC_ERROR_CARD_ECC_DISABLED /*!< Command has been executed without using internal ECC */
+#define HAL_SD_ERROR_ERASE_RESET SDMMC_ERROR_ERASE_RESET /*!< Erase sequence was cleared before executing because an out
+ of erase sequence command was received */
+#define HAL_SD_ERROR_AKE_SEQ_ERR SDMMC_ERROR_AKE_SEQ_ERR /*!< Error in sequence of authentication */
+#define HAL_SD_ERROR_INVALID_VOLTRANGE SDMMC_ERROR_INVALID_VOLTRANGE /*!< Error in case of invalid voltage range */
+#define HAL_SD_ERROR_ADDR_OUT_OF_RANGE SDMMC_ERROR_ADDR_OUT_OF_RANGE /*!< Error when addressed block is out of range */
+#define HAL_SD_ERROR_REQUEST_NOT_APPLICABLE SDMMC_ERROR_REQUEST_NOT_APPLICABLE /*!< Error when command request is not applicable */
+#define HAL_SD_ERROR_PARAM SDMMC_ERROR_INVALID_PARAMETER /*!< the used parameter is not valid */
+#define HAL_SD_ERROR_UNSUPPORTED_FEATURE SDMMC_ERROR_UNSUPPORTED_FEATURE /*!< Error when feature is not insupported */
+#define HAL_SD_ERROR_BUSY SDMMC_ERROR_BUSY /*!< Error when transfer process is busy */
+#define HAL_SD_ERROR_DMA SDMMC_ERROR_DMA /*!< Error while DMA transfer */
+#define HAL_SD_ERROR_TIMEOUT SDMMC_ERROR_TIMEOUT /*!< Timeout error */
+
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+#define HAL_SD_ERROR_INVALID_CALLBACK SDMMC_ERROR_INVALID_PARAMETER /*!< Invalid callback error */
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Constansts_Group2 SD context enumeration
+ * @{
+ */
+#define SD_CONTEXT_NONE ((uint32_t)0x00000000U) /*!< None */
+#define SD_CONTEXT_READ_SINGLE_BLOCK ((uint32_t)0x00000001U) /*!< Read single block operation */
+#define SD_CONTEXT_READ_MULTIPLE_BLOCK ((uint32_t)0x00000002U) /*!< Read multiple blocks operation */
+#define SD_CONTEXT_WRITE_SINGLE_BLOCK ((uint32_t)0x00000010U) /*!< Write single block operation */
+#define SD_CONTEXT_WRITE_MULTIPLE_BLOCK ((uint32_t)0x00000020U) /*!< Write multiple blocks operation */
+#define SD_CONTEXT_IT ((uint32_t)0x00000008U) /*!< Process in Interrupt mode */
+#define SD_CONTEXT_DMA ((uint32_t)0x00000080U) /*!< Process in DMA mode */
+
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Constansts_Group3 SD Supported Memory Cards
+ * @{
+ */
+#define CARD_NORMAL_SPEED ((uint32_t)0x00000000U) /*!< Normal Speed Card <12.5Mo/s , Spec Version 1.01 */
+#define CARD_HIGH_SPEED ((uint32_t)0x00000100U) /*!< High Speed Card <25Mo/s , Spec version 2.00 */
+#define CARD_ULTRA_HIGH_SPEED ((uint32_t)0x00000200U) /*!< UHS-I SD Card <50Mo/s for SDR50, DDR5 Cards
+ and <104Mo/s for SDR104, Spec version 3.01 */
+
+#define CARD_SDSC ((uint32_t)0x00000000U) /*!< SD Standard Capacity <2Go */
+#define CARD_SDHC_SDXC ((uint32_t)0x00000001U) /*!< SD High Capacity <32Go, SD Extended Capacity <2To */
+#define CARD_SECURED ((uint32_t)0x00000003U)
+
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Constansts_Group4 SD Supported Version
+ * @{
+ */
+#define CARD_V1_X ((uint32_t)0x00000000U)
+#define CARD_V2_X ((uint32_t)0x00000001U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SD_Exported_macros SD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+/** @brief Reset SD handle state.
+ * @param __HANDLE__ : SD handle.
+ * @retval None
+ */
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) do { \
+ (__HANDLE__)->State = HAL_SD_STATE_RESET; \
+ (__HANDLE__)->MspInitCallback = NULL; \
+ (__HANDLE__)->MspDeInitCallback = NULL; \
+ } while(0)
+#else
+#define __HAL_SD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SD_STATE_RESET)
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+
+/**
+ * @brief Enable the SD device interrupt.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be enabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
+ * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt
+ * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt
+ * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt
+ * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt
+ * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt
+ * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
+ * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt
+ * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt
+ * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt
+ * @retval None
+ */
+#define __HAL_SD_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Disable the SD device interrupt.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDMMC interrupt sources to be disabled.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
+ * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt
+ * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt
+ * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt
+ * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt
+ * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt
+ * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
+ * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt
+ * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt
+ * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt
+ * @retval None
+ */
+#define __HAL_SD_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDMMC_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Check whether the specified SD flag is set or not.
+ * @param __HANDLE__: SD Handle
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDMMC_FLAG_DTIMEOUT: Data timeout
+ * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero)
+ * @arg SDMMC_FLAG_DHOLD: Data transfer Hold
+ * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12
+ * @arg SDMMC_FLAG_CPSMACT: Command path state machine active
+ * @arg SDMMC_FLAG_DPSMACT: Data path state machine active
+ * @arg SDMMC_FLAG_TXFIFOHE: Transmit FIFO Half Empty
+ * @arg SDMMC_FLAG_RXFIFOHF: Receive FIFO Half Full
+ * @arg SDMMC_FLAG_TXFIFOF: Transmit FIFO full
+ * @arg SDMMC_FLAG_RXFIFOF: Receive FIFO full
+ * @arg SDMMC_FLAG_TXFIFOE: Transmit FIFO empty
+ * @arg SDMMC_FLAG_RXFIFOE: Receive FIFO empty
+ * @arg SDMMC_FLAG_BUSYD0: Inverted value of SDMMC_D0 line (Busy)
+ * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected
+ * @arg SDMMC_FLAG_SDIOIT: SDIO interrupt received
+ * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received
+ * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout
+ * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion
+ * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure
+ * @arg SDMMC_FLAG_IDMATE: IDMA transfer error
+ * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete
+ * @retval The new state of SD FLAG (SET or RESET).
+ */
+#define __HAL_SD_GET_FLAG(__HANDLE__, __FLAG__) __SDMMC_GET_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+ * @brief Clear the SD's pending flags.
+ * @param __HANDLE__: SD Handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDMMC_FLAG_CCRCFAIL: Command response received (CRC check failed)
+ * @arg SDMMC_FLAG_DCRCFAIL: Data block sent/received (CRC check failed)
+ * @arg SDMMC_FLAG_CTIMEOUT: Command response timeout
+ * @arg SDMMC_FLAG_DTIMEOUT: Data timeout
+ * @arg SDMMC_FLAG_TXUNDERR: Transmit FIFO underrun error
+ * @arg SDMMC_FLAG_RXOVERR: Received FIFO overrun error
+ * @arg SDMMC_FLAG_CMDREND: Command response received (CRC check passed)
+ * @arg SDMMC_FLAG_CMDSENT: Command sent (no response required)
+ * @arg SDMMC_FLAG_DATAEND: Data end (data counter, DATACOUNT, is zero)
+ * @arg SDMMC_FLAG_DHOLD: Data transfer Hold
+ * @arg SDMMC_FLAG_DBCKEND: Data block sent/received (CRC check passed)
+ * @arg SDMMC_FLAG_DABORT: Data transfer aborted by CMD12
+ * @arg SDMMC_FLAG_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected
+ * @arg SDMMC_FLAG_SDIOIT: SDIO interrupt received
+ * @arg SDMMC_FLAG_ACKFAIL: Boot Acknowledgment received
+ * @arg SDMMC_FLAG_ACKTIMEOUT: Boot Acknowledgment timeout
+ * @arg SDMMC_FLAG_VSWEND: Voltage switch critical timing section completion
+ * @arg SDMMC_FLAG_CKSTOP: SDMMC_CK stopped in Voltage switch procedure
+ * @arg SDMMC_FLAG_IDMATE: IDMA transfer error
+ * @arg SDMMC_FLAG_IDMABTC: IDMA buffer transfer complete
+ * @retval None
+ */
+#define __HAL_SD_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDMMC_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__))
+
+/**
+ * @brief Check whether the specified SD interrupt has occurred or not.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the SDMMC interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
+ * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt
+ * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt
+ * @arg SDMMC_IT_DPSMACT: Data path state machine active interrupt
+ * @arg SDMMC_IT_CPSMACT: Command path state machine active interrupt
+ * @arg SDMMC_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt
+ * @arg SDMMC_IT_RXFIFOHF: Receive FIFO Half Full interrupt
+ * @arg SDMMC_IT_TXFIFOF: Transmit FIFO full interrupt
+ * @arg SDMMC_IT_RXFIFOF: Receive FIFO full interrupt
+ * @arg SDMMC_IT_TXFIFOE: Transmit FIFO empty interrupt
+ * @arg SDMMC_IT_RXFIFOE: Receive FIFO empty interrupt
+ * @arg SDMMC_IT_BUSYD0: Inverted value of SDMMC_D0 line (Busy)
+ * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt
+ * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt
+ * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt
+ * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
+ * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt
+ * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt
+ * @arg SDMMC_IT_IDMATE: IDMA transfer error interrupt
+ * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt
+ * @retval The new state of SD IT (SET or RESET).
+ */
+#define __HAL_SD_GET_IT(__HANDLE__, __INTERRUPT__) __SDMMC_GET_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @brief Clear the SD's interrupt pending bits.
+ * @param __HANDLE__: SD Handle
+ * @param __INTERRUPT__: specifies the interrupt pending bit to clear.
+ * This parameter can be one or a combination of the following values:
+ * @arg SDMMC_IT_CCRCFAIL: Command response received (CRC check failed) interrupt
+ * @arg SDMMC_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt
+ * @arg SDMMC_IT_CTIMEOUT: Command response timeout interrupt
+ * @arg SDMMC_IT_DTIMEOUT: Data timeout interrupt
+ * @arg SDMMC_IT_TXUNDERR: Transmit FIFO underrun error interrupt
+ * @arg SDMMC_IT_RXOVERR: Received FIFO overrun error interrupt
+ * @arg SDMMC_IT_CMDREND: Command response received (CRC check passed) interrupt
+ * @arg SDMMC_IT_CMDSENT: Command sent (no response required) interrupt
+ * @arg SDMMC_IT_DATAEND: Data end (data counter, DATACOUNT, is zero) interrupt
+ * @arg SDMMC_IT_DHOLD: Data transfer Hold interrupt
+ * @arg SDMMC_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt
+ * @arg SDMMC_IT_DABORT: Data transfer aborted by CMD12 interrupt
+ * @arg SDMMC_IT_BUSYD0END: End of SDMMC_D0 Busy following a CMD response detected interrupt
+ * @arg SDMMC_IT_SDIOIT: SDIO interrupt received interrupt
+ * @arg SDMMC_IT_ACKFAIL: Boot Acknowledgment received interrupt
+ * @arg SDMMC_IT_ACKTIMEOUT: Boot Acknowledgment timeout interrupt
+ * @arg SDMMC_IT_VSWEND: Voltage switch critical timing section completion interrupt
+ * @arg SDMMC_IT_CKSTOP: SDMMC_CK stopped in Voltage switch procedure interrupt
+ * @arg SDMMC_IT_IDMATE: IDMA transfer error interrupt
+ * @arg SDMMC_IT_IDMABTC: IDMA buffer transfer complete interrupt
+ * @retval None
+ */
+#define __HAL_SD_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDMMC_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__))
+
+/**
+ * @}
+ */
+
+/* Include SD HAL Extension module */
+#include "stm32h7xx_hal_sd_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup SD_Exported_Functions SD Exported Functions
+ * @{
+ */
+
+/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_SD_Init(SD_HandleTypeDef *hsd);
+HAL_StatusTypeDef HAL_SD_InitCard(SD_HandleTypeDef *hsd);
+HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd);
+void HAL_SD_MspInit(SD_HandleTypeDef *hsd);
+void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint32_t BlockStartAdd, uint32_t BlockEndAdd);
+/* Non-Blocking mode: IT */
+HAL_StatusTypeDef HAL_SD_ReadBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+HAL_StatusTypeDef HAL_SD_WriteBlocks_IT(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+HAL_StatusTypeDef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint8_t *pData, uint32_t BlockAdd, uint32_t NumberOfBlocks);
+
+void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd);
+
+/* Callback in non blocking modes (DMA) */
+void HAL_SD_TxCpltCallback(SD_HandleTypeDef *hsd);
+void HAL_SD_RxCpltCallback(SD_HandleTypeDef *hsd);
+void HAL_SD_ErrorCallback(SD_HandleTypeDef *hsd);
+void HAL_SD_AbortCallback(SD_HandleTypeDef *hsd);
+
+#if (USE_SD_TRANSCEIVER != 0U)
+/* Callback to switch in 1.8V mode */
+void HAL_SD_DriveTransceiver_1_8V_Callback(FlagStatus status);
+#endif /* USE_SD_TRANSCEIVER */
+
+#if defined (USE_HAL_SD_REGISTER_CALLBACKS) && (USE_HAL_SD_REGISTER_CALLBACKS == 1U)
+/* SD callback registering/unregistering */
+HAL_StatusTypeDef HAL_SD_RegisterCallback (SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID, pSD_CallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_SD_UnRegisterCallback(SD_HandleTypeDef *hsd, HAL_SD_CallbackIDTypeDef CallbackID);
+
+#if (USE_SD_TRANSCEIVER != 0U)
+HAL_StatusTypeDef HAL_SD_RegisterTransceiverCallback (SD_HandleTypeDef *hsd, pSD_TransceiverCallbackTypeDef pCallback);
+HAL_StatusTypeDef HAL_SD_UnRegisterTransceiverCallback(SD_HandleTypeDef *hsd);
+#endif /* USE_SD_TRANSCEIVER */
+#endif /* USE_HAL_SD_REGISTER_CALLBACKS */
+
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_SD_ConfigWideBusOperation(SD_HandleTypeDef *hsd, uint32_t WideMode);
+HAL_StatusTypeDef HAL_SD_ConfigSpeedBusOperation(SD_HandleTypeDef *hsd, uint32_t SpeedMode);
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Functions_Group4 SD card related functions
+ * @{
+ */
+HAL_SD_CardStateTypedef HAL_SD_GetCardState(SD_HandleTypeDef *hsd);
+HAL_StatusTypeDef HAL_SD_GetCardCID(SD_HandleTypeDef *hsd, HAL_SD_CardCIDTypedef *pCID);
+HAL_StatusTypeDef HAL_SD_GetCardCSD(SD_HandleTypeDef *hsd, HAL_SD_CardCSDTypedef *pCSD);
+HAL_StatusTypeDef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pStatus);
+HAL_StatusTypeDef HAL_SD_GetCardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypeDef *pCardInfo);
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Functions_Group5 Peripheral State and Errors functions
+ * @{
+ */
+HAL_SD_StateTypeDef HAL_SD_GetState(SD_HandleTypeDef *hsd);
+uint32_t HAL_SD_GetError(SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/** @defgroup SD_Exported_Functions_Group6 Perioheral Abort management
+ * @{
+ */
+HAL_StatusTypeDef HAL_SD_Abort(SD_HandleTypeDef *hsd);
+HAL_StatusTypeDef HAL_SD_Abort_IT(SD_HandleTypeDef *hsd);
+/**
+ * @}
+ */
+
+/* Private types -------------------------------------------------------------*/
+/** @defgroup SD_Private_Types SD Private Types
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private defines -----------------------------------------------------------*/
+/** @defgroup SD_Private_Defines SD Private Defines
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup SD_Private_Variables SD Private Variables
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup SD_Private_Constants SD Private Constants
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup SD_Private_Macros SD Private Macros
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions prototypes ----------------------------------------------*/
+/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+/* Private functions ---------------------------------------------------------*/
+/** @defgroup SD_Private_Functions SD Private Functions
+ * @{
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* STM32H7xx_HAL_SD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
