Diff: TARGET_USENSE/TOOLCHAIN_IAR/fsl_flexio_spi_edma.h

Revision:

171:3a7713b1edbc

Parent:

145:64910690c574

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_USENSE/TOOLCHAIN_IAR/fsl_flexio_spi_edma.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,222 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _FSL_FLEXIO_SPI_EDMA_H_
+#define _FSL_FLEXIO_SPI_EDMA_H_
+
+#include "fsl_flexio_spi.h"
+#include "fsl_edma.h"
+
+/*!
+ * @addtogroup flexio_edma_spi
+ * @{
+ */
+
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*! @brief  typedef for flexio_spi_master_edma_handle_t in advance. */
+typedef struct _flexio_spi_master_edma_handle flexio_spi_master_edma_handle_t;
+
+/*! @brief  Slave handle is the same with master handle. */
+typedef flexio_spi_master_edma_handle_t flexio_spi_slave_edma_handle_t;
+
+/*! @brief FlexIO SPI master callback for finished transmit */
+typedef void (*flexio_spi_master_edma_transfer_callback_t)(FLEXIO_SPI_Type *base,
+                                                           flexio_spi_master_edma_handle_t *handle,
+                                                           status_t status,
+                                                           void *userData);
+
+/*! @brief FlexIO SPI slave callback for finished transmit */
+typedef void (*flexio_spi_slave_edma_transfer_callback_t)(FLEXIO_SPI_Type *base,
+                                                          flexio_spi_slave_edma_handle_t *handle,
+                                                          status_t status,
+                                                          void *userData);
+
+/*! @brief FlexIO SPI eDMA transfer handle, users should not touch the content of the handle.*/
+struct _flexio_spi_master_edma_handle
+{
+    size_t transferSize;                                 /*!< Total bytes to be transferred. */
+    bool txInProgress;                                   /*!< Send transfer in progress */
+    bool rxInProgress;                                   /*!< Receive transfer in progress */
+    edma_handle_t *txHandle;                             /*!< DMA handler for SPI send */
+    edma_handle_t *rxHandle;                             /*!< DMA handler for SPI receive */
+    flexio_spi_master_edma_transfer_callback_t callback; /*!< Callback for SPI DMA transfer */
+    void *userData;                                      /*!< User Data for SPI DMA callback */
+};
+
+/*******************************************************************************
+ * APIs
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @name eDMA Transactional
+ * @{
+ */
+
+/*!
+ * @brief Initializes the FLEXO SPI master eDMA handle.
+ *
+ * This function initializes the FLEXO SPI master eDMA handle which can be used for other FLEXO SPI master transactional
+ * APIs.
+ * For a specified FLEXO SPI instance, call this API once to get the initialized handle.
+ *
+ * @param base pointer to FLEXIO_SPI_Type structure.
+ * @param handle pointer to flexio_spi_master_edma_handle_t structure to store the transfer state.
+ * @param callback SPI callback, NULL means no callback.
+ * @param userData callback function parameter.
+ * @param txHandle User requested eDMA handle for FlexIO SPI RX eDMA transfer.
+ * @param rxHandle User requested eDMA handle for FlexIO SPI TX eDMA transfer.
+ * @retval kStatus_Success Successfully create the handle.
+ * @retval kStatus_OutOfRange The FlexIO SPI eDMA type/handle table out of range.
+ */
+status_t FLEXIO_SPI_MasterTransferCreateHandleEDMA(FLEXIO_SPI_Type *base,
+                                                   flexio_spi_master_edma_handle_t *handle,
+                                                   flexio_spi_master_edma_transfer_callback_t callback,
+                                                   void *userData,
+                                                   edma_handle_t *txHandle,
+                                                   edma_handle_t *rxHandle);
+
+/*!
+ * @brief Performs a non-blocking FlexIO SPI transfer using eDMA.
+ *
+ * @note This interface returns immediately after transfer initiates. Call
+ * FLEXIO_SPI_MasterGetTransferCountEDMA to poll the transfer status to check
+ * whether FlexIO SPI transfer finished.
+ *
+ * @param base pointer to FLEXIO_SPI_Type structure.
+ * @param handle pointer to flexio_spi_master_edma_handle_t structure to store the transfer state.
+ * @param xfer Pointer to FlexIO SPI transfer structure.
+ * @retval kStatus_Success Successfully start a transfer.
+ * @retval kStatus_InvalidArgument Input argument is invalid.
+ * @retval kStatus_FLEXIO_SPI_Busy FlexIO SPI is not idle, is running another transfer.
+ */
+status_t FLEXIO_SPI_MasterTransferEDMA(FLEXIO_SPI_Type *base,
+                                       flexio_spi_master_edma_handle_t *handle,
+                                       flexio_spi_transfer_t *xfer);
+
+/*!
+ * @brief Aborts a FlexIO SPI transfer using eDMA.
+ *
+ * @param base pointer to FLEXIO_SPI_Type structure.
+ * @param handle FlexIO SPI eDMA handle pointer.
+ */
+void FLEXIO_SPI_MasterTransferAbortEDMA(FLEXIO_SPI_Type *base, flexio_spi_master_edma_handle_t *handle);
+
+/*!
+ * @brief Gets the remaining bytes for FlexIO SPI eDMA transfer.
+ *
+ * @param base pointer to FLEXIO_SPI_Type structure.
+ * @param handle FlexIO SPI eDMA handle pointer.
+ * @param count Number of bytes transferred so far by the non-blocking transaction.
+ */
+status_t FLEXIO_SPI_MasterTransferGetCountEDMA(FLEXIO_SPI_Type *base,
+                                               flexio_spi_master_edma_handle_t *handle,
+                                               size_t *count);
+
+/*!
+ * @brief Initializes the FlexIO SPI slave eDMA handle.
+ *
+ * This function initializes the FlexIO SPI slave eDMA handle.
+ *
+ * @param base pointer to FLEXIO_SPI_Type structure.
+ * @param handle pointer to flexio_spi_slave_edma_handle_t structure to store the transfer state.
+ * @param callback SPI callback, NULL means no callback.
+ * @param userData callback function parameter.
+ * @param txHandle User requested eDMA handle for FlexIO SPI TX eDMA transfer.
+ * @param rxHandle User requested eDMA handle for FlexIO SPI RX eDMA transfer.
+ */
+static inline void FLEXIO_SPI_SlaveTransferCreateHandleEDMA(FLEXIO_SPI_Type *base,
+                                                            flexio_spi_slave_edma_handle_t *handle,
+                                                            flexio_spi_slave_edma_transfer_callback_t callback,
+                                                            void *userData,
+                                                            edma_handle_t *txHandle,
+                                                            edma_handle_t *rxHandle)
+{
+    FLEXIO_SPI_MasterTransferCreateHandleEDMA(base, handle, callback, userData, txHandle, rxHandle);
+}
+
+/*!
+ * @brief Performs a non-blocking FlexIO SPI transfer using eDMA.
+ *
+ * @note This interface returns immediately after transfer initiates. Call
+ * FLEXIO_SPI_SlaveGetTransferCountEDMA to poll the transfer status to
+ * check whether FlexIO SPI transfer finished.
+ *
+ * @param base pointer to FLEXIO_SPI_Type structure.
+ * @param handle pointer to flexio_spi_slave_edma_handle_t structure to store the transfer state.
+ * @param xfer Pointer to FlexIO SPI transfer structure.
+ * @retval kStatus_Success Successfully start a transfer.
+ * @retval kStatus_InvalidArgument Input argument is invalid.
+ * @retval kStatus_FLEXIO_SPI_Busy FlexIO SPI is not idle, is running another transfer.
+ */
+status_t FLEXIO_SPI_SlaveTransferEDMA(FLEXIO_SPI_Type *base,
+                                      flexio_spi_slave_edma_handle_t *handle,
+                                      flexio_spi_transfer_t *xfer);
+
+/*!
+ * @brief Aborts a FlexIO SPI transfer using eDMA.
+ *
+ * @param base pointer to FLEXIO_SPI_Type structure.
+ * @param handle pointer to flexio_spi_slave_edma_handle_t structure to store the transfer state.
+ */
+static inline void FLEXIO_SPI_SlaveTransferAbortEDMA(FLEXIO_SPI_Type *base, flexio_spi_slave_edma_handle_t *handle)
+{
+    FLEXIO_SPI_MasterTransferAbortEDMA(base, handle);
+}
+
+/*!
+ * @brief Gets the remaining bytes to be transferred for FlexIO SPI eDMA.
+ *
+ * @param base pointer to FLEXIO_SPI_Type structure.
+ * @param handle FlexIO SPI eDMA handle pointer.
+ * @param count Number of bytes transferred so far by the non-blocking transaction.
+ */
+static inline status_t FLEXIO_SPI_SlaveTransferGetCountEDMA(FLEXIO_SPI_Type *base,
+                                                            flexio_spi_slave_edma_handle_t *handle,
+                                                            size_t *count)
+{
+    return FLEXIO_SPI_MasterTransferGetCountEDMA(base, handle, count);
+}
+
+/*! @} */
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+#endif