Diff: TARGET_TB_SENSE_1/TOOLCHAIN_ARM_MICRO/PeripheralNames.h

Revision:

171:3a7713b1edbc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_TB_SENSE_1/TOOLCHAIN_ARM_MICRO/PeripheralNames.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,151 @@
+/***************************************************************************//**
+ * @file PeripheralNames.h
+ *******************************************************************************
+ * @section License
+ * <b>(C) Copyright 2015 Silicon Labs, http://www.silabs.com</b>
+ *******************************************************************************
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License"); you may
+ * not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ ******************************************************************************/
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "em_adc.h"
+#include "em_usart.h"
+#include "em_i2c.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if DEVICE_ANALOGIN
+typedef enum {
+#ifdef ADC0_BASE
+    ADC_0 = ADC0_BASE,
+#endif
+} ADCName;
+#endif
+
+#if DEVICE_ANALOGOUT
+typedef enum {
+#ifdef DAC0_BASE
+    DAC_0 = DAC0_BASE,
+#endif
+} DACName;
+#endif
+
+#if DEVICE_I2C
+typedef enum {
+#ifdef I2C0_BASE
+    I2C_0 = I2C0_BASE,
+#endif
+#ifdef I2C1_BASE
+    I2C_1 = I2C1_BASE,
+#endif
+#ifdef I2C2_BASE
+    I2C_2 = I2C2_BASE,
+#endif
+} I2CName;
+#endif
+
+#if DEVICE_PWMOUT
+typedef enum {
+#if defined(TIMER_ROUTE_CC0PEN) || defined(TIMER_ROUTEPEN_CC0PEN)
+    PWM_CH0 = 0,
+#endif
+#if defined(TIMER_ROUTE_CC1PEN) || defined(TIMER_ROUTEPEN_CC1PEN)
+    PWM_CH1 = 1,
+#endif
+#if defined(TIMER_ROUTE_CC2PEN) || defined(TIMER_ROUTEPEN_CC2PEN)
+    PWM_CH2 = 2,
+#endif
+#if defined(TIMER_ROUTE_CC3PEN) || defined(TIMER_ROUTEPEN_CC3PEN)
+    PWM_CH3 = 3,
+#endif
+} PWMName;
+#endif
+
+#if DEVICE_SPI
+typedef enum {
+#ifdef USART0_BASE
+    SPI_0 = USART0_BASE,
+#endif
+#ifdef USART1_BASE
+    SPI_1 = USART1_BASE,
+#endif
+#ifdef USART2_BASE
+    SPI_2 = USART2_BASE,
+#endif
+#ifdef USART3_BASE
+    SPI_3 = USART3_BASE,
+#endif
+#ifdef USART4_BASE
+    SPI_4 = USART4_BASE,
+#endif
+#ifdef USART5_BASE
+    SPI_5 = USART5_BASE,
+#endif
+} SPIName;
+#endif
+
+#if DEVICE_SERIAL
+typedef enum {
+#ifdef USART0_BASE
+    USART_0 = USART0_BASE,
+#endif
+#ifdef USART1_BASE
+    USART_1 = USART1_BASE,
+#endif
+#ifdef USART2_BASE
+    USART_2 = USART2_BASE,
+#endif
+#ifdef USART3_BASE
+    USART_3 = USART3_BASE,
+#endif
+#ifdef USART4_BASE
+    USART_4 = USART4_BASE,
+#endif
+#ifdef USART5_BASE
+    USART_5 = USART5_BASE,
+#endif
+#ifdef UART0_BASE
+    UART_0 = UART0_BASE,
+#endif
+#ifdef UART1_BASE
+    UART_1 = UART1_BASE,
+#endif
+#ifdef LEUART0_BASE
+    LEUART_0 = LEUART0_BASE,
+#endif
+#ifdef LEUART1_BASE
+    LEUART_1 = LEUART1_BASE,
+#endif
+} UARTName;
+#endif
+
+#if DEVICE_QSPI
+typedef enum {
+#ifdef QSPI0_BASE
+    QSPI_0 = QSPI0_BASE,
+#endif
+} QSPIName;
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif