Diff: TARGET_SDT51822B/TOOLCHAIN_IAR/dfu_init.h

Revision:

171:3a7713b1edbc

Parent:

169:a7c7b631e539

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SDT51822B/TOOLCHAIN_IAR/dfu_init.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,161 @@
+/* 
+ * Copyright (c) 2014 Nordic Semiconductor ASA
+ * All rights reserved.
+ * 
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 
+ *   1. Redistributions of source code must retain the above copyright notice, this list 
+ *      of conditions and the following disclaimer.
+ *
+ *   2. Redistributions in binary form, except as embedded into a Nordic Semiconductor ASA 
+ *      integrated circuit in a product or a software update for such product, must reproduce 
+ *      the above copyright notice, this list of conditions and the following disclaimer in 
+ *      the documentation and/or other materials provided with the distribution.
+ *
+ *   3. Neither the name of Nordic Semiconductor ASA nor the names of its contributors may be 
+ *      used to endorse or promote products derived from this software without specific prior 
+ *      written permission.
+ *
+ *   4. This software, with or without modification, must only be used with a 
+ *      Nordic Semiconductor ASA integrated circuit.
+ *
+ *   5. Any software provided in binary or object form under this license must not be reverse 
+ *      engineered, decompiled, modified and/or disassembled. 
+ * 
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * 
+ */
+
+
+/**@file
+ *
+ * @defgroup nrf_dfu_init Init packet handling in DFU
+ * @{
+ *
+ * @brief Device Firmware Update module type and function declaration for init packet handling.
+ *
+ * @details This header contains basic functionality for performing safety checks on software 
+ *          updates for \nRFXX based devices. It provides a skeleton for pre-checking an init packet
+ *          to ensure the following image is compatible with this device. A safety check should 
+ *          always be performed to prevent accidental flashing of unsupported applications or a
+ *          wrong combination of application and SoftDevice.
+ *          The device information contains information such as:
+ *          - Device type (2 bytes), for example Heart Rate. The device type is a number defined by
+ *            the customer. It can be located in UICR or FICR.
+ *          - Device revision (2 bytes), for example major revision 1, minor revision 0. The device
+ *            revision is a number defined by the customer. It can be located in UICR or FICR.
+ *          - List of SoftDevices supported by this application, for example 
+ *              0x0049 = S110v6_0_0 
+ *              0xFFFE = S110 development (any SoftDevice accepted),
+ *          - CRC or hash of firmware image
+ *
+ * @note This module does not support security features such as image signing, but the corresponding
+ *       implementation allows for such extensions.
+ *       If the init packet is signed by a trusted source, it must be decrypted before it can be 
+ *       processed.
+ */
+
+#ifndef DFU_INIT_H__
+#define DFU_INIT_H__
+
+#include <stdint.h>
+#include "nrf.h"
+
+/**@brief Structure contained in an init packet. Contains information on device type, revision, and 
+ *        supported SoftDevices.
+ */
+typedef struct
+{
+    uint16_t device_type;                                                                   /**< Device type (2 bytes), for example Heart Rate. This number must be defined by the customer before production. It can be located in UICR or FICR. */
+    uint16_t device_rev;                                                                    /**< Device revision (2 bytes), for example major revision 1, minor revision 0. This number must be defined by the customer before production. It can be located in UICR or FICR. */
+    uint32_t app_version;                                                                   /**< Application version for the image software. This field allows for additional checking, for example ensuring that a downgrade is not allowed. */
+    uint16_t softdevice_len;                                                                /**< Number of different SoftDevice revisions compatible with this application. The list of SoftDevice firmware IDs is defined in @ref softdevice. */
+    uint16_t softdevice[1];                                                                 /**< Variable length array of SoftDevices compatible with this application. The length of the array is specified in the length field. SoftDevice firmware id 0xFFFE indicates any SoftDevice. */
+} dfu_init_packet_t;
+
+/**@brief Structure holding basic device information settings.
+ */
+typedef struct
+{
+    uint16_t device_type;                                                                   /**< Device type (2 bytes), for example Heart Rate. This number must be defined by the customer before production. It can be located in UICR or FICR. */
+    uint16_t device_rev;                                                                    /**< Device revision (2 bytes), for example major revision 1, minor revision 0. This number must be defined by the customer before production. It can be located in UICR or FICR. */
+} dfu_device_info_t;
+
+/** The device info offset can be modified to place the device info settings at a different location.
+  * If the customer reserved UICR location is used for other application specific data, the offset
+  * must be updated to avoid collision with that data.
+  */
+/** [DFU UICR DEV offset] */
+#define UICR_CUSTOMER_DEVICE_INFO_OFFSET    0x0                                             /**< Device info offset inside the customer UICR reserved area. Customers may change this value to place the device information in a user-preferred location. */
+/** [DFU UICR DEV offset] */
+
+#define UICR_CUSTOMER_RESERVED_OFFSET       0x80                                            /**< Customer reserved area in the UICR. The area from UICR + 0x80 is reserved for customer usage. */
+#define DFU_DEVICE_INFO_BASE                (NRF_UICR_BASE + \
+                                             UICR_CUSTOMER_RESERVED_OFFSET + \
+                                             UICR_CUSTOMER_DEVICE_INFO_OFFSET)              /**< The device information base address inside of UICR. */
+#define DFU_DEVICE_INFO                     ((dfu_device_info_t *)DFU_DEVICE_INFO_BASE)     /**< The memory mapped structure for device information data. */
+
+#define DFU_DEVICE_TYPE_EMPTY               ((uint16_t)0xFFFF)                              /**< Mask indicating no device type is present in UICR. 0xFFFF is default flash pattern when not written with data. */
+#define DFU_DEVICE_REVISION_EMPTY           ((uint16_t)0xFFFF)                              /**< Mask indicating no device revision is present in UICR. 0xFFFF is default flash pattern when not written with data. */
+#define DFU_SOFTDEVICE_ANY                  ((uint16_t)0xFFFE)                              /**< Mask indicating that any SoftDevice is allowed for updating this application. Allows for easy development. Not to be used in production images. */
+
+
+/**@brief DFU prevalidate call for pre-checking the received init packet.
+ *
+ * @details  Pre-validation will safety check the firmware image to be transfered in second stage.
+ *           The function currently checks the device type, device revision, application firmware 
+ *           version, and supported SoftDevices. More checks should be added according to 
+ *           customer-specific requirements.
+ * 
+ * @param[in] p_init_data    Pointer to the init packet. If the init packet is encrypted or signed,
+ *                           it must first be decrypted before being checked.
+ * @param[in] init_data_len  Length of the init data.
+ *
+ * @retval NRF_SUCCESS              If the pre-validation succeeded, that means the image is 
+ *                                  supported by the device and it is considered to come from a 
+ *                                  trusted source (signing).
+ * @retval NRF_ERROR_INVALID_DATA   If the pre-validation failed, that means the image is not 
+ *                                  supported by the device or comes from an un-trusted source 
+ *                                  (signing).
+ * @retval NRF_ERROR_INVALID_LENGTH If the size of the init packet is not within the limits of 
+ *                                  the init packet handler.
+ */
+uint32_t dfu_init_prevalidate(uint8_t * p_init_data, uint32_t init_data_len);
+
+/**@brief DFU postvalidate call for post-checking the received image using the init packet.
+ *
+ * @details  Post-validation can verify the integrity check the firmware image received before 
+ *           activating the image.
+ *           Checks performed can be: 
+ *           - A simple CRC as shown in the corresponding implementation of this API in the file
+ *             dfu_init_template.c
+ *           - A hash for better verification of the image.
+ *           - A signature to ensure the image originates from a trusted source.
+ *           Checks are intended to be expanded for customer-specific requirements.
+ * 
+ * @param[in] p_image    Pointer to the received image. The init data provided in the call 
+ *                       \ref dfu_init_prevalidate will be used for validating the image.
+ * @param[in] image_len  Length of the image data.
+ *
+ * @retval NRF_SUCCESS             If the post-validation succeeded, that meant the integrity of the
+ *                                 image has been verified and the image originates from a trusted 
+ *                                 source (signing).
+ * @retval NRF_ERROR_INVALID_DATA  If the post-validation failed, that meant the post check of the 
+ *                                 image failed such as the CRC is not matching the image transfered
+ *                                 or the verification of the image fails (signing).
+ */
+uint32_t dfu_init_postvalidate(uint8_t * p_image, uint32_t image_len);
+
+#endif // DFU_INIT_H__
+
+/**@} */