Diff: TARGET_SDT32625B/TOOLCHAIN_GCC_ARM/i2cm.h

Revision:

171:3a7713b1edbc

Parent:

169:a7c7b631e539

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SDT32625B/TOOLCHAIN_GCC_ARM/i2cm.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,257 @@
+/*******************************************************************************
+ * Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *
+ * $Date: 2016-04-27 11:55:43 -0500 (Wed, 27 Apr 2016) $
+ * $Revision: 22541 $
+ *
+ ******************************************************************************/
+
+/**
+ * @file    i2cm.h
+ * @brief   I2C Master driver header file.
+ */
+
+#ifndef _I2CM_H_
+#define _I2CM_H_
+
+/***** Includes *****/
+#include "mxc_config.h"
+#include "mxc_sys.h"
+#include "i2cm_regs.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/***** Definitions *****/
+
+/// @brief I2CM frequencies.
+typedef enum {
+    I2CM_SPEED_100KHZ = 100000,
+    I2CM_SPEED_400KHZ = 400000
+} i2cm_speed_t;
+
+/// @brief I2CM Transaction request.
+typedef struct i2cm_req i2cm_req_t;
+struct i2cm_req {
+
+    /**
+     * @details Only supports 7-bit addressing. Driver will shift the address and
+     *          add the read bit when necessary.
+     */
+    uint8_t addr;
+    const uint8_t *cmd_data;    ///< Optional command data to write before reading.
+    uint32_t cmd_len;           ///< Number of bytes in command.
+    uint8_t *data;              ///< Data to write or read.
+    uint32_t data_len;          ///< Length of data.
+    uint32_t cmd_num;           ///< Number of command bytes sent
+    uint32_t data_num;          ///< Number of data bytes sent
+
+    /**
+     * @brief   Callback for asynchronous request.
+     * @param   i2cm_req_t*  Pointer to the transaction request.
+     * @param   int         Error code.
+     */
+    void (*callback)(i2cm_req_t*, int);
+};
+
+/***** Globals *****/
+
+/***** Function Prototypes *****/
+
+/**
+ * @brief   Initialize I2CM module.
+ * @param   i2cm        Pointer to I2CM regs.
+ * @param   cfg         Pointer to I2CM configuration.
+ * @param   speed       I2CM frequency.
+ * @returns #E_NO_ERROR if everything is successful, error if unsuccessful.
+ */
+int I2CM_Init(mxc_i2cm_regs_t *i2cm, const sys_cfg_i2cm_t *sys_cfg, i2cm_speed_t speed);
+
+/**
+ * @brief   Shutdown I2CM module.
+ * @param   i2cm    Pointer to I2CM regs.
+ * @returns #E_NO_ERROR if everything is successful, error if unsuccessful.
+ */
+int I2CM_Shutdown(mxc_i2cm_regs_t *i2cm);
+
+/**
+ * @brief   Read I2CM data. Will block until transaction is complete.
+ * @param   i2cm        Pointer to I2CM regs.
+ * @param   addr        I2C address of the slave.
+ * @param   cmd_data    Data to write before reading.
+ * @param   cmd_len     Number of bytes to write before reading.
+ * @param   data        Where to store read data.
+ * @param   len         Number of bytes to read.
+ * @details Command is an optional feature where the master will write the cmd_data
+ *          before reading from the slave. If command is undesired, leave the pointer
+ *          NULL and cmd_len 0. If there is a command, the master will send a
+            repeated start before reading. Will block until transaction has completed.
+ * @returns Bytes transacted if everything is successful, error if unsuccessful.
+ */
+int I2CM_Read(mxc_i2cm_regs_t *i2cm, uint8_t addr, const uint8_t *cmd_data,
+              uint32_t cmd_len, uint8_t* data, uint32_t len);
+
+/**
+ * @brief   Write I2CM data. Will block until transaction is complete.
+ * @param   i2cm        Pointer to I2CM regs.
+ * @param   addr        I2C address of the slave.
+ * @param   cmd_data    Data to write before writing data.
+ * @param   cmd_len     Number of bytes to write before writing data.
+ * @param   data        Data to be written.
+ * @param   len         Number of bytes to Write.
+ * @details Command is an optional feature where the master will write the cmd_data
+ *          before writing to the slave. If command is undesired, leave the pointer
+ *          NULL and cmd_len 0. If there is a command, the master will send a
+            repeated start before writing again. Will block until transaction has completed.
+ * @returns Bytes transacted if everything is successful, error if unsuccessful.
+ */
+int I2CM_Write(mxc_i2cm_regs_t *i2cm, uint8_t addr, const uint8_t *cmd_data,
+               uint32_t cmd_len, uint8_t* data, uint32_t len);
+
+/**
+ * @brief   Asynchronously read I2CM data.
+ * @param   i2cm    Pointer to I2CM regs.
+ * @param   req     Request for an I2CM transaction.
+ * @returns #E_NO_ERROR if everything is successful, error if unsuccessful.
+ */
+int I2CM_ReadAsync(mxc_i2cm_regs_t *i2cm, i2cm_req_t *req);
+
+/**
+ * @brief   Asynchronously write I2CM data.
+ * @param   i2cm    Pointer to I2CM regs.
+ * @param   req     Request for an I2CM transaction.
+ * @returns #E_NO_ERROR if everything is successful, error if unsuccessful.
+ */
+int I2CM_WriteAsync(mxc_i2cm_regs_t *i2cm, i2cm_req_t *req);
+
+/**
+ * @brief   Abort asynchronous request.
+ * @param   req     Pointer to request for a I2CM transaction.
+ * @note    Will call the callback for the request.
+ * @returns #E_NO_ERROR if request aborted, error if unsuccessful.
+ */
+int I2CM_AbortAsync(i2cm_req_t *req);
+
+/**
+ * @brief   I2CM interrupt handler.
+ * @details This function should be called by the application from the interrupt
+ *          handler if I2CM interrupts are enabled. Alternately, this function
+ *          can be periodically called by the application if I2CM interrupts are
+ *          disabled.
+ * @param   i2cm    Base address of the I2CM module.
+ */
+void I2CM_Handler(mxc_i2cm_regs_t *i2cm);
+
+/**
+ * @brief   Checks to see if the I2CM is busy.
+ * @param   i2cm    Pointer to I2CM regs.
+ * @returns #E_NO_ERROR if idle, #E_BUSY if in use.
+ */
+int I2CM_Busy(mxc_i2cm_regs_t *i2cm);
+
+/**
+ * @brief   Attempt to prepare the I2CM for sleep.
+ * @param   i2cm    Pointer to I2CM regs.
+ * @details Checks for any ongoing transactions. Disables interrupts if the I2CM
+            is idle.
+ * @returns #E_NO_ERROR if ready to sleep, #E_BUSY if not ready for sleep.
+ */
+int I2CM_PrepForSleep(mxc_i2cm_regs_t *i2cm);
+
+/**
+ * @brief   Check the I2C bus.
+ * @param   i2cm    Pointer to I2CM regs.
+ * @details Checks the I2CM bus to determine if there is any other master using
+ *          the bus.
+ * @returns #E_NO_ERROR if SCL and SDA are high, #E_BUSY otherwise.
+ */
+int I2CM_BusCheck(mxc_i2cm_regs_t *i2cm);
+
+/**
+ * @brief   Drain all of the data in the RXFIFO.
+ * @param   i2cm    Pointer to UART regs.
+ */
+__STATIC_INLINE void I2CM_DrainRX(mxc_i2cm_regs_t *i2cm)
+{
+    i2cm->ctrl &= ~(MXC_F_I2CM_CTRL_RX_FIFO_EN);
+    i2cm->ctrl |= MXC_F_I2CM_CTRL_RX_FIFO_EN;
+}
+
+/**
+ * @brief   Drain all of the data in the TXFIFO.
+ * @param   i2cm    Pointer to UART regs.
+ */
+__STATIC_INLINE void I2CM_DrainTX(mxc_i2cm_regs_t *i2cm)
+{
+    i2cm->ctrl &= ~(MXC_F_I2CM_CTRL_TX_FIFO_EN);
+    i2cm->ctrl |= MXC_F_I2CM_CTRL_TX_FIFO_EN;
+}
+
+/**
+ * @brief   Clear interrupt flags.
+ * @param   i2cm    Pointer to I2CM regs.
+  * @param   mask    Mask of interrupts to clear.
+ */
+__STATIC_INLINE void I2CM_ClearFlags(mxc_i2cm_regs_t *i2cm, uint32_t mask)
+{
+    i2cm->intfl = mask;
+}
+
+/**
+ * @brief   Get interrupt flags.
+ * @param   i2cm    Pointer to I2CM regs.
+ * @returns Mask of active flags.
+ */
+__STATIC_INLINE unsigned I2CM_GetFlags(mxc_i2cm_regs_t *i2cm)
+{
+    return(i2cm->intfl);
+}
+/**
+ * @brief   Set the I2C Frequency
+ * @param   i2cm    Pointer to I2CM regs.
+ * @param   speed   speed in Hz
+ * @details sets the registers for the proper frequency
+ * @returns #E_NO_ERROR if Frequency is supported, #E_NOT_Supported otherwise.
+ */
+int I2CM_SetFrequency(mxc_i2cm_regs_t *i2cm, int speed);
+
+void I2CM_Recover(mxc_i2cm_regs_t *i2cm);
+int I2CM_WriteTxFifo(mxc_i2cm_regs_t *regs, mxc_i2cm_fifo_regs_t *fifo, const uint16_t data);
+int I2CM_TxInProgress(mxc_i2cm_regs_t *i2cm);
+int I2CM_Tx(mxc_i2cm_regs_t *i2cm, mxc_i2cm_fifo_regs_t *fifo, uint8_t addr, const uint8_t *data, uint32_t len, uint8_t stop);
+int I2CM_Rx(mxc_i2cm_regs_t *i2cm, mxc_i2cm_fifo_regs_t *fifo, uint8_t addr, uint8_t *data, uint32_t len);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _I2CM_H_ */