Diff: TARGET_SAMD21J18A/TOOLCHAIN_GCC_ARM/ins_ac.h

Revision:

171:3a7713b1edbc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SAMD21J18A/TOOLCHAIN_GCC_ARM/ins_ac.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,90 @@
+/**
+ * \file
+ *
+ * \brief Instance description for AC
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef _SAMD21_AC_INSTANCE_
+#define _SAMD21_AC_INSTANCE_
+
+/* ========== Register definition for AC peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_AC_CTRLA               (0x42004400U) /**< \brief (AC) Control A */
+#define REG_AC_CTRLB               (0x42004401U) /**< \brief (AC) Control B */
+#define REG_AC_EVCTRL              (0x42004402U) /**< \brief (AC) Event Control */
+#define REG_AC_INTENCLR            (0x42004404U) /**< \brief (AC) Interrupt Enable Clear */
+#define REG_AC_INTENSET            (0x42004405U) /**< \brief (AC) Interrupt Enable Set */
+#define REG_AC_INTFLAG             (0x42004406U) /**< \brief (AC) Interrupt Flag Status and Clear */
+#define REG_AC_STATUSA             (0x42004408U) /**< \brief (AC) Status A */
+#define REG_AC_STATUSB             (0x42004409U) /**< \brief (AC) Status B */
+#define REG_AC_STATUSC             (0x4200440AU) /**< \brief (AC) Status C */
+#define REG_AC_WINCTRL             (0x4200440CU) /**< \brief (AC) Window Control */
+#define REG_AC_COMPCTRL0           (0x42004410U) /**< \brief (AC) Comparator Control 0 */
+#define REG_AC_COMPCTRL1           (0x42004414U) /**< \brief (AC) Comparator Control 1 */
+#define REG_AC_SCALER0             (0x42004420U) /**< \brief (AC) Scaler 0 */
+#define REG_AC_SCALER1             (0x42004421U) /**< \brief (AC) Scaler 1 */
+#else
+#define REG_AC_CTRLA               (*(RwReg8 *)0x42004400U) /**< \brief (AC) Control A */
+#define REG_AC_CTRLB               (*(WoReg8 *)0x42004401U) /**< \brief (AC) Control B */
+#define REG_AC_EVCTRL              (*(RwReg16*)0x42004402U) /**< \brief (AC) Event Control */
+#define REG_AC_INTENCLR            (*(RwReg8 *)0x42004404U) /**< \brief (AC) Interrupt Enable Clear */
+#define REG_AC_INTENSET            (*(RwReg8 *)0x42004405U) /**< \brief (AC) Interrupt Enable Set */
+#define REG_AC_INTFLAG             (*(RwReg8 *)0x42004406U) /**< \brief (AC) Interrupt Flag Status and Clear */
+#define REG_AC_STATUSA             (*(RoReg8 *)0x42004408U) /**< \brief (AC) Status A */
+#define REG_AC_STATUSB             (*(RoReg8 *)0x42004409U) /**< \brief (AC) Status B */
+#define REG_AC_STATUSC             (*(RoReg8 *)0x4200440AU) /**< \brief (AC) Status C */
+#define REG_AC_WINCTRL             (*(RwReg8 *)0x4200440CU) /**< \brief (AC) Window Control */
+#define REG_AC_COMPCTRL0           (*(RwReg  *)0x42004410U) /**< \brief (AC) Comparator Control 0 */
+#define REG_AC_COMPCTRL1           (*(RwReg  *)0x42004414U) /**< \brief (AC) Comparator Control 1 */
+#define REG_AC_SCALER0             (*(RwReg8 *)0x42004420U) /**< \brief (AC) Scaler 0 */
+#define REG_AC_SCALER1             (*(RwReg8 *)0x42004421U) /**< \brief (AC) Scaler 1 */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/* ========== Instance parameters for AC peripheral ========== */
+#define AC_CMP_NUM                  2        // Number of comparators
+#define AC_GCLK_ID_ANA              32       // Index of Generic Clock for analog
+#define AC_GCLK_ID_DIG              31       // Index of Generic Clock for digital
+#define AC_NUM_CMP                  2
+#define AC_PAIRS                    1        // Number of pairs of comparators
+
+#endif /* _SAMD21_AC_INSTANCE_ */