Diff: TARGET_SAMD21J18A/TOOLCHAIN_ARM_MICRO/ins_wdt.h

Revision:

171:3a7713b1edbc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SAMD21J18A/TOOLCHAIN_ARM_MICRO/ins_wdt.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,74 @@
+/**
+ * \file
+ *
+ * \brief Instance description for WDT
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+/*
+ * Support and FAQ: visit <a href="http://www.atmel.com/design-support/">Atmel Support</a>
+ */
+
+#ifndef _SAMD21_WDT_INSTANCE_
+#define _SAMD21_WDT_INSTANCE_
+
+/* ========== Register definition for WDT peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_WDT_CTRL               (0x40001000U) /**< \brief (WDT) Control */
+#define REG_WDT_CONFIG             (0x40001001U) /**< \brief (WDT) Configuration */
+#define REG_WDT_EWCTRL             (0x40001002U) /**< \brief (WDT) Early Warning Interrupt Control */
+#define REG_WDT_INTENCLR           (0x40001004U) /**< \brief (WDT) Interrupt Enable Clear */
+#define REG_WDT_INTENSET           (0x40001005U) /**< \brief (WDT) Interrupt Enable Set */
+#define REG_WDT_INTFLAG            (0x40001006U) /**< \brief (WDT) Interrupt Flag Status and Clear */
+#define REG_WDT_STATUS             (0x40001007U) /**< \brief (WDT) Status */
+#define REG_WDT_CLEAR              (0x40001008U) /**< \brief (WDT) Clear */
+#else
+#define REG_WDT_CTRL               (*(RwReg8 *)0x40001000U) /**< \brief (WDT) Control */
+#define REG_WDT_CONFIG             (*(RwReg8 *)0x40001001U) /**< \brief (WDT) Configuration */
+#define REG_WDT_EWCTRL             (*(RwReg8 *)0x40001002U) /**< \brief (WDT) Early Warning Interrupt Control */
+#define REG_WDT_INTENCLR           (*(RwReg8 *)0x40001004U) /**< \brief (WDT) Interrupt Enable Clear */
+#define REG_WDT_INTENSET           (*(RwReg8 *)0x40001005U) /**< \brief (WDT) Interrupt Enable Set */
+#define REG_WDT_INTFLAG            (*(RwReg8 *)0x40001006U) /**< \brief (WDT) Interrupt Flag Status and Clear */
+#define REG_WDT_STATUS             (*(RoReg8 *)0x40001007U) /**< \brief (WDT) Status */
+#define REG_WDT_CLEAR              (*(WoReg8 *)0x40001008U) /**< \brief (WDT) Clear */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/* ========== Instance parameters for WDT peripheral ========== */
+#define WDT_GCLK_ID                 3        // Index of Generic Clock
+
+#endif /* _SAMD21_WDT_INSTANCE_ */