Diff: TARGET_SAMD21G18A/TOOLCHAIN_ARM_STD/ins_ac1.h

Revision:

171:3a7713b1edbc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_SAMD21G18A/TOOLCHAIN_ARM_STD/ins_ac1.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,87 @@
+/**
+ * \file
+ *
+ * \brief Instance description for AC1
+ *
+ * Copyright (c) 2014-2015 Atmel Corporation. All rights reserved.
+ *
+ * \asf_license_start
+ *
+ * \page License
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright notice,
+ *    this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ *    this list of conditions and the following disclaimer in the documentation
+ *    and/or other materials provided with the distribution.
+ *
+ * 3. The name of Atmel may not be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * 4. This software may only be redistributed and used in connection with an
+ *    Atmel microcontroller product.
+ *
+ * THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
+ * EXPRESSLY AND SPECIFICALLY DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ * \asf_license_stop
+ *
+ */
+
+#ifndef _SAMD21_AC1_INSTANCE_
+#define _SAMD21_AC1_INSTANCE_
+
+/* ========== Register definition for AC1 peripheral ========== */
+#if (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
+#define REG_AC1_CTRLA              (0x42005400U) /**< \brief (AC1) Control A */
+#define REG_AC1_CTRLB              (0x42005401U) /**< \brief (AC1) Control B */
+#define REG_AC1_EVCTRL             (0x42005402U) /**< \brief (AC1) Event Control */
+#define REG_AC1_INTENCLR           (0x42005404U) /**< \brief (AC1) Interrupt Enable Clear */
+#define REG_AC1_INTENSET           (0x42005405U) /**< \brief (AC1) Interrupt Enable Set */
+#define REG_AC1_INTFLAG            (0x42005406U) /**< \brief (AC1) Interrupt Flag Status and Clear */
+#define REG_AC1_STATUSA            (0x42005408U) /**< \brief (AC1) Status A */
+#define REG_AC1_STATUSB            (0x42005409U) /**< \brief (AC1) Status B */
+#define REG_AC1_STATUSC            (0x4200540AU) /**< \brief (AC1) Status C */
+#define REG_AC1_WINCTRL            (0x4200540CU) /**< \brief (AC1) Window Control */
+#define REG_AC1_COMPCTRL0          (0x42005410U) /**< \brief (AC1) Comparator Control 0 */
+#define REG_AC1_COMPCTRL1          (0x42005414U) /**< \brief (AC1) Comparator Control 1 */
+#define REG_AC1_SCALER0            (0x42005420U) /**< \brief (AC1) Scaler 0 */
+#define REG_AC1_SCALER1            (0x42005421U) /**< \brief (AC1) Scaler 1 */
+#else
+#define REG_AC1_CTRLA              (*(RwReg8 *)0x42005400U) /**< \brief (AC1) Control A */
+#define REG_AC1_CTRLB              (*(WoReg8 *)0x42005401U) /**< \brief (AC1) Control B */
+#define REG_AC1_EVCTRL             (*(RwReg16*)0x42005402U) /**< \brief (AC1) Event Control */
+#define REG_AC1_INTENCLR           (*(RwReg8 *)0x42005404U) /**< \brief (AC1) Interrupt Enable Clear */
+#define REG_AC1_INTENSET           (*(RwReg8 *)0x42005405U) /**< \brief (AC1) Interrupt Enable Set */
+#define REG_AC1_INTFLAG            (*(RwReg8 *)0x42005406U) /**< \brief (AC1) Interrupt Flag Status and Clear */
+#define REG_AC1_STATUSA            (*(RoReg8 *)0x42005408U) /**< \brief (AC1) Status A */
+#define REG_AC1_STATUSB            (*(RoReg8 *)0x42005409U) /**< \brief (AC1) Status B */
+#define REG_AC1_STATUSC            (*(RoReg8 *)0x4200540AU) /**< \brief (AC1) Status C */
+#define REG_AC1_WINCTRL            (*(RwReg8 *)0x4200540CU) /**< \brief (AC1) Window Control */
+#define REG_AC1_COMPCTRL0          (*(RwReg  *)0x42005410U) /**< \brief (AC1) Comparator Control 0 */
+#define REG_AC1_COMPCTRL1          (*(RwReg  *)0x42005414U) /**< \brief (AC1) Comparator Control 1 */
+#define REG_AC1_SCALER0            (*(RwReg8 *)0x42005420U) /**< \brief (AC1) Scaler 0 */
+#define REG_AC1_SCALER1            (*(RwReg8 *)0x42005421U) /**< \brief (AC1) Scaler 1 */
+#endif /* (defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
+
+/* ========== Instance parameters for AC1 peripheral ========== */
+#define AC1_CMP_NUM                 2        // Number of comparators
+#define AC1_GCLK_ID_ANA             32       // Index of Generic Clock for analog
+#define AC1_GCLK_ID_DIG             31       // Index of Generic Clock for digital
+#define AC1_NUM_CMP                 2
+#define AC1_PAIRS                   1        // Number of pairs of comparators
+
+#endif /* _SAMD21_AC1_INSTANCE_ */