Diff: TARGET_RAPIDIOT_K64F/TOOLCHAIN_GCC_ARM/fsl_rcm.h

Revision:

171:3a7713b1edbc

Parent:

145:64910690c574

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_RAPIDIOT_K64F/TOOLCHAIN_GCC_ARM/fsl_rcm.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,431 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _FSL_RCM_H_
+#define _FSL_RCM_H_
+
+#include "fsl_common.h"
+
+/*! @addtogroup rcm */
+/*! @{*/
+
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief RCM driver version 2.0.1. */
+#define FSL_RCM_DRIVER_VERSION (MAKE_VERSION(2, 0, 1))
+/*@}*/
+
+/*!
+ * @brief System Reset Source Name definitions
+ */
+typedef enum _rcm_reset_source
+{
+#if (defined(FSL_FEATURE_RCM_REG_WIDTH) && (FSL_FEATURE_RCM_REG_WIDTH == 32))
+/* RCM register bit width is 32. */
+#if (defined(FSL_FEATURE_RCM_HAS_WAKEUP) && FSL_FEATURE_RCM_HAS_WAKEUP)
+    kRCM_SourceWakeup = RCM_SRS_WAKEUP_MASK, /*!< Low-leakage wakeup reset */
+#endif
+    kRCM_SourceLvd = RCM_SRS_LVD_MASK, /*!< Low-voltage detect reset */
+#if (defined(FSL_FEATURE_RCM_HAS_LOC) && FSL_FEATURE_RCM_HAS_LOC)
+    kRCM_SourceLoc = RCM_SRS_LOC_MASK, /*!< Loss of clock reset */
+#endif                                 /* FSL_FEATURE_RCM_HAS_LOC */
+#if (defined(FSL_FEATURE_RCM_HAS_LOL) && FSL_FEATURE_RCM_HAS_LOL)
+    kRCM_SourceLol = RCM_SRS_LOL_MASK,   /*!< Loss of lock reset */
+#endif                                   /* FSL_FEATURE_RCM_HAS_LOL */
+    kRCM_SourceWdog = RCM_SRS_WDOG_MASK, /*!< Watchdog reset */
+    kRCM_SourcePin = RCM_SRS_PIN_MASK,   /*!< External pin reset */
+    kRCM_SourcePor = RCM_SRS_POR_MASK,   /*!< Power on reset */
+#if (defined(FSL_FEATURE_RCM_HAS_JTAG) && FSL_FEATURE_RCM_HAS_JTAG)
+    kRCM_SourceJtag = RCM_SRS_JTAG_MASK,     /*!< JTAG generated reset */
+#endif                                       /* FSL_FEATURE_RCM_HAS_JTAG */
+    kRCM_SourceLockup = RCM_SRS_LOCKUP_MASK, /*!< Core lock up reset */
+    kRCM_SourceSw = RCM_SRS_SW_MASK,         /*!< Software reset */
+#if (defined(FSL_FEATURE_RCM_HAS_MDM_AP) && FSL_FEATURE_RCM_HAS_MDM_AP)
+    kRCM_SourceMdmap = RCM_SRS_MDM_AP_MASK, /*!< MDM-AP system reset */
+#endif                                      /* FSL_FEATURE_RCM_HAS_MDM_AP */
+#if (defined(FSL_FEATURE_RCM_HAS_EZPORT) && FSL_FEATURE_RCM_HAS_EZPORT)
+    kRCM_SourceEzpt = RCM_SRS_EZPT_MASK,       /*!< EzPort reset */
+#endif                                         /* FSL_FEATURE_RCM_HAS_EZPORT */
+    kRCM_SourceSackerr = RCM_SRS_SACKERR_MASK, /*!< Parameter could get all reset flags */
+
+#else /* (FSL_FEATURE_RCM_REG_WIDTH == 32) */
+/* RCM register bit width is 8. */
+#if (defined(FSL_FEATURE_RCM_HAS_WAKEUP) && FSL_FEATURE_RCM_HAS_WAKEUP)
+    kRCM_SourceWakeup = RCM_SRS0_WAKEUP_MASK, /*!< Low-leakage wakeup reset */
+#endif
+    kRCM_SourceLvd = RCM_SRS0_LVD_MASK, /*!< Low-voltage detect reset */
+#if (defined(FSL_FEATURE_RCM_HAS_LOC) && FSL_FEATURE_RCM_HAS_LOC)
+    kRCM_SourceLoc = RCM_SRS0_LOC_MASK,   /*!< Loss of clock reset */
+#endif /* FSL_FEATURE_RCM_HAS_LOC */
+#if (defined(FSL_FEATURE_RCM_HAS_LOL) && FSL_FEATURE_RCM_HAS_LOL)
+    kRCM_SourceLol = RCM_SRS0_LOL_MASK,   /*!< Loss of lock reset */
+#endif /* FSL_FEATURE_RCM_HAS_LOL */
+    kRCM_SourceWdog = RCM_SRS0_WDOG_MASK, /*!< Watchdog reset */
+    kRCM_SourcePin = RCM_SRS0_PIN_MASK,   /*!< External pin reset */
+    kRCM_SourcePor = RCM_SRS0_POR_MASK, /*!< Power on reset */
+#if (defined(FSL_FEATURE_RCM_HAS_JTAG) && FSL_FEATURE_RCM_HAS_JTAG)
+    kRCM_SourceJtag = RCM_SRS1_JTAG_MASK << 8U,     /*!< JTAG generated reset */
+#endif /* FSL_FEATURE_RCM_HAS_JTAG */
+    kRCM_SourceLockup = RCM_SRS1_LOCKUP_MASK << 8U, /*!< Core lock up reset */
+    kRCM_SourceSw = RCM_SRS1_SW_MASK << 8U, /*!< Software reset */
+#if (defined(FSL_FEATURE_RCM_HAS_MDM_AP) && FSL_FEATURE_RCM_HAS_MDM_AP)
+    kRCM_SourceMdmap = RCM_SRS1_MDM_AP_MASK << 8U,    /*!< MDM-AP system reset */
+#endif /* FSL_FEATURE_RCM_HAS_MDM_AP */
+#if (defined(FSL_FEATURE_RCM_HAS_EZPORT) && FSL_FEATURE_RCM_HAS_EZPORT)
+    kRCM_SourceEzpt = RCM_SRS1_EZPT_MASK << 8U,       /*!< EzPort reset */
+#endif /* FSL_FEATURE_RCM_HAS_EZPORT */
+    kRCM_SourceSackerr = RCM_SRS1_SACKERR_MASK << 8U, /*!< Parameter could get all reset flags */
+#endif /* (FSL_FEATURE_RCM_REG_WIDTH == 32) */
+    kRCM_SourceAll = 0xffffffffU,
+} rcm_reset_source_t;
+
+/*!
+ * @brief Reset pin filter select in Run and Wait modes.
+ */
+typedef enum _rcm_run_wait_filter_mode
+{
+    kRCM_FilterDisable = 0U,  /*!< All filtering disabled */
+    kRCM_FilterBusClock = 1U, /*!< Bus clock filter enabled */
+    kRCM_FilterLpoClock = 2U  /*!< LPO clock filter enabled */
+} rcm_run_wait_filter_mode_t;
+
+#if (defined(FSL_FEATURE_RCM_HAS_BOOTROM) && FSL_FEATURE_RCM_HAS_BOOTROM)
+/*!
+ * @brief Boot from ROM configuration.
+ */
+typedef enum _rcm_boot_rom_config
+{
+    kRCM_BootFlash = 0U,   /*!< Boot from flash */
+    kRCM_BootRomCfg0 = 1U, /*!< Boot from boot ROM due to BOOTCFG0 */
+    kRCM_BootRomFopt = 2U, /*!< Boot from boot ROM due to FOPT[7] */
+    kRCM_BootRomBoth = 3U  /*!< Boot from boot ROM due to both BOOTCFG0 and FOPT[7] */
+} rcm_boot_rom_config_t;
+#endif /* FSL_FEATURE_RCM_HAS_BOOTROM */
+
+#if (defined(FSL_FEATURE_RCM_HAS_SRIE) && FSL_FEATURE_RCM_HAS_SRIE)
+/*!
+ * @brief Maximum delay time from interrupt asserts to system reset.
+ */
+typedef enum _rcm_reset_delay
+{
+    kRCM_ResetDelay8Lpo = 0U,   /*!< Delay 8 LPO cycles.   */
+    kRCM_ResetDelay32Lpo = 1U,  /*!< Delay 32 LPO cycles.  */
+    kRCM_ResetDelay128Lpo = 2U, /*!< Delay 128 LPO cycles. */
+    kRCM_ResetDelay512Lpo = 3U  /*!< Delay 512 LPO cycles. */
+} rcm_reset_delay_t;
+
+/*!
+ * @brief System reset interrupt enable bit definitions.
+ */
+typedef enum _rcm_interrupt_enable
+{
+    kRCM_IntNone = 0U,                              /*!< No interrupt enabled.           */
+    kRCM_IntLossOfClk = RCM_SRIE_LOC_MASK,          /*!< Loss of clock interrupt.        */
+    kRCM_IntLossOfLock = RCM_SRIE_LOL_MASK,         /*!< Loss of lock interrupt.         */
+    kRCM_IntWatchDog = RCM_SRIE_WDOG_MASK,          /*!< Watch dog interrupt.            */
+    kRCM_IntExternalPin = RCM_SRIE_PIN_MASK,        /*!< External pin interrupt.         */
+    kRCM_IntGlobal = RCM_SRIE_GIE_MASK,             /*!< Global interrupts.              */
+    kRCM_IntCoreLockup = RCM_SRIE_LOCKUP_MASK,      /*!< Core lock up interrupt           */
+    kRCM_IntSoftware = RCM_SRIE_SW_MASK,            /*!< software interrupt              */
+    kRCM_IntStopModeAckErr = RCM_SRIE_SACKERR_MASK, /*!< Stop mode ACK error interrupt.  */
+#if (defined(FSL_FEATURE_RCM_HAS_CORE1) && FSL_FEATURE_RCM_HAS_CORE1)
+    kRCM_IntCore1 = RCM_SRIE_CORE1_MASK, /*!< Core 1 interrupt.               */
+#endif
+    kRCM_IntAll = RCM_SRIE_LOC_MASK /*!< Enable all interrupts.          */
+                  |
+                  RCM_SRIE_LOL_MASK | RCM_SRIE_WDOG_MASK | RCM_SRIE_PIN_MASK | RCM_SRIE_GIE_MASK |
+                  RCM_SRIE_LOCKUP_MASK | RCM_SRIE_SW_MASK | RCM_SRIE_SACKERR_MASK
+#if (defined(FSL_FEATURE_RCM_HAS_CORE1) && FSL_FEATURE_RCM_HAS_CORE1)
+                  |
+                  RCM_SRIE_CORE1_MASK
+#endif
+} rcm_interrupt_enable_t;
+#endif /* FSL_FEATURE_RCM_HAS_SRIE */
+
+#if (defined(FSL_FEATURE_RCM_HAS_VERID) && FSL_FEATURE_RCM_HAS_VERID)
+/*!
+ * @brief IP version ID definition.
+ */
+typedef struct _rcm_version_id
+{
+    uint16_t feature; /*!< Feature Specification Number. */
+    uint8_t minor;    /*!< Minor version number.         */
+    uint8_t major;    /*!< Major version number.         */
+} rcm_version_id_t;
+#endif
+
+/*!
+ * @brief Reset pin filter configuration.
+ */
+typedef struct _rcm_reset_pin_filter_config
+{
+    bool enableFilterInStop;                    /*!< Reset pin filter select in stop mode. */
+    rcm_run_wait_filter_mode_t filterInRunWait; /*!< Reset pin filter in run/wait mode. */
+    uint8_t busClockFilterCount;                /*!< Reset pin bus clock filter width.  */
+} rcm_reset_pin_filter_config_t;
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif /* __cplusplus*/
+
+/*! @name Reset Control Module APIs*/
+/*@{*/
+
+#if (defined(FSL_FEATURE_RCM_HAS_VERID) && FSL_FEATURE_RCM_HAS_VERID)
+/*!
+ * @brief Gets the RCM version ID.
+ *
+ * This function gets the RCM version ID including the major version number,
+ * the minor version number, and the feature specification number.
+ *
+ * @param base RCM peripheral base address.
+ * @param versionId     Pointer to the version ID structure.
+ */
+static inline void RCM_GetVersionId(RCM_Type *base, rcm_version_id_t *versionId)
+{
+    *((uint32_t *)versionId) = base->VERID;
+}
+#endif
+
+#if (defined(FSL_FEATURE_RCM_HAS_PARAM) && FSL_FEATURE_RCM_HAS_PARAM)
+/*!
+ * @brief Gets the reset source implemented status.
+ *
+ * This function gets the RCM parameter that indicates whether the corresponding reset source is implemented.
+ * Use source masks defined in the rcm_reset_source_t to get the desired source status.
+ *
+ * This is an example.
+   @code
+   uint32_t status;
+
+   // To test whether the MCU is reset using Watchdog.
+   status = RCM_GetResetSourceImplementedStatus(RCM) & (kRCM_SourceWdog | kRCM_SourcePin);
+   @endcode
+ *
+ * @param base RCM peripheral base address.
+ * @return All reset source implemented status bit map.
+ */
+static inline uint32_t RCM_GetResetSourceImplementedStatus(RCM_Type *base)
+{
+    return base->PARAM;
+}
+#endif /* FSL_FEATURE_RCM_HAS_PARAM */
+
+/*!
+ * @brief Gets the reset source status which caused a previous reset.
+ *
+ * This function gets the current reset source status. Use source masks
+ * defined in the rcm_reset_source_t to get the desired source status.
+ *
+ * This is an example.
+   @code
+   uint32_t resetStatus;
+
+   // To get all reset source statuses.
+   resetStatus = RCM_GetPreviousResetSources(RCM) & kRCM_SourceAll;
+
+   // To test whether the MCU is reset using Watchdog.
+   resetStatus = RCM_GetPreviousResetSources(RCM) & kRCM_SourceWdog;
+
+   // To test multiple reset sources.
+   resetStatus = RCM_GetPreviousResetSources(RCM) & (kRCM_SourceWdog | kRCM_SourcePin);
+   @endcode
+ *
+ * @param base RCM peripheral base address.
+ * @return All reset source status bit map.
+ */
+static inline uint32_t RCM_GetPreviousResetSources(RCM_Type *base)
+{
+#if (defined(FSL_FEATURE_RCM_REG_WIDTH) && (FSL_FEATURE_RCM_REG_WIDTH == 32))
+    return base->SRS;
+#else
+    return (uint32_t)((uint32_t)base->SRS0 | ((uint32_t)base->SRS1 << 8U));
+#endif /* (FSL_FEATURE_RCM_REG_WIDTH == 32) */
+}
+
+#if (defined(FSL_FEATURE_RCM_HAS_SSRS) && FSL_FEATURE_RCM_HAS_SSRS)
+/*!
+ * @brief Gets the sticky reset source status.
+ *
+ * This function gets the current reset source status that has not been cleared
+ * by software for a specific source.
+ *
+ * This is an example.
+   @code
+   uint32_t resetStatus;
+
+   // To get all reset source statuses.
+   resetStatus = RCM_GetStickyResetSources(RCM) & kRCM_SourceAll;
+
+   // To test whether the MCU is reset using Watchdog.
+   resetStatus = RCM_GetStickyResetSources(RCM) & kRCM_SourceWdog;
+
+   // To test multiple reset sources.
+   resetStatus = RCM_GetStickyResetSources(RCM) & (kRCM_SourceWdog | kRCM_SourcePin);
+   @endcode
+ *
+ * @param base RCM peripheral base address.
+ * @return All reset source status bit map.
+ */
+static inline uint32_t RCM_GetStickyResetSources(RCM_Type *base)
+{
+#if (defined(FSL_FEATURE_RCM_REG_WIDTH) && (FSL_FEATURE_RCM_REG_WIDTH == 32))
+    return base->SSRS;
+#else
+    return (base->SSRS0 | ((uint32_t)base->SSRS1 << 8U));
+#endif /* (FSL_FEATURE_RCM_REG_WIDTH == 32) */
+}
+
+/*!
+ * @brief Clears the sticky reset source status.
+ *
+ * This function clears the sticky system reset flags indicated by source masks.
+ *
+ * This is an example.
+   @code
+   // Clears multiple reset sources.
+   RCM_ClearStickyResetSources(kRCM_SourceWdog | kRCM_SourcePin);
+   @endcode
+ *
+ * @param base RCM peripheral base address.
+ * @param sourceMasks reset source status bit map
+ */
+static inline void RCM_ClearStickyResetSources(RCM_Type *base, uint32_t sourceMasks)
+{
+#if (defined(FSL_FEATURE_RCM_REG_WIDTH) && (FSL_FEATURE_RCM_REG_WIDTH == 32))
+    base->SSRS = sourceMasks;
+#else
+    base->SSRS0 = (sourceMasks & 0xffU);
+    base->SSRS1 = ((sourceMasks >> 8U) & 0xffU);
+#endif /* (FSL_FEATURE_RCM_REG_WIDTH == 32) */
+}
+#endif /* FSL_FEATURE_RCM_HAS_SSRS */
+
+/*!
+ * @brief Configures the reset pin filter.
+ *
+ * This function sets the reset pin filter including the filter source, filter
+ * width, and so on.
+ *
+ * @param base RCM peripheral base address.
+ * @param config Pointer to the configuration structure.
+ */
+void RCM_ConfigureResetPinFilter(RCM_Type *base, const rcm_reset_pin_filter_config_t *config);
+
+#if (defined(FSL_FEATURE_RCM_HAS_EZPMS) && FSL_FEATURE_RCM_HAS_EZPMS)
+/*!
+ * @brief Gets the EZP_MS_B pin assert status.
+ *
+ * This function gets the easy port mode status (EZP_MS_B) pin assert status.
+ *
+ * @param base RCM peripheral base address.
+ * @return status  true - asserted, false - reasserted
+ */
+static inline bool RCM_GetEasyPortModePinStatus(RCM_Type *base)
+{
+    return (bool)(base->MR & RCM_MR_EZP_MS_MASK);
+}
+#endif /* FSL_FEATURE_RCM_HAS_EZPMS */
+
+#if (defined(FSL_FEATURE_RCM_HAS_BOOTROM) && FSL_FEATURE_RCM_HAS_BOOTROM)
+/*!
+ * @brief Gets the ROM boot source.
+ *
+ * This function gets the ROM boot source during the last chip reset.
+ *
+ * @param base RCM peripheral base address.
+ * @return The ROM boot source.
+ */
+static inline rcm_boot_rom_config_t RCM_GetBootRomSource(RCM_Type *base)
+{
+    return (rcm_boot_rom_config_t)((base->MR & RCM_MR_BOOTROM_MASK) >> RCM_MR_BOOTROM_SHIFT);
+}
+
+/*!
+ * @brief Clears the ROM boot source flag.
+ *
+ * This function clears the ROM boot source flag.
+ *
+ * @param base     Register base address of RCM
+ */
+static inline void RCM_ClearBootRomSource(RCM_Type *base)
+{
+    base->MR |= RCM_MR_BOOTROM_MASK;
+}
+
+/*!
+ * @brief Forces the boot from ROM.
+ *
+ * This function forces booting from ROM during all subsequent system resets.
+ *
+ * @param base RCM peripheral base address.
+ * @param config   Boot configuration.
+ */
+void RCM_SetForceBootRomSource(RCM_Type *base, rcm_boot_rom_config_t config);
+#endif /* FSL_FEATURE_RCM_HAS_BOOTROM */
+
+#if (defined(FSL_FEATURE_RCM_HAS_SRIE) && FSL_FEATURE_RCM_HAS_SRIE)
+/*!
+ * @brief Sets the system reset interrupt configuration.
+ *
+ * For a graceful shut down, the RCM supports delaying the assertion of the system
+ * reset for a period of time when the reset interrupt is generated. This function
+ * can be used to enable the interrupt and the delay period. The interrupts
+ * are passed in as bit mask. See rcm_int_t for details. For example, to
+ * delay a reset for 512 LPO cycles after the WDOG timeout or loss-of-clock occurs,
+ * configure as follows:
+ * RCM_SetSystemResetInterruptConfig(kRCM_IntWatchDog | kRCM_IntLossOfClk, kRCM_ResetDelay512Lpo);
+ *
+ * @param base RCM peripheral base address.
+ * @param intMask   Bit mask of the system reset interrupts to enable. See
+ *                  rcm_interrupt_enable_t for details.
+ * @param Delay     Bit mask of the system reset interrupts to enable.
+ */
+static inline void RCM_SetSystemResetInterruptConfig(RCM_Type *base, uint32_t intMask, rcm_reset_delay_t delay)
+{
+    base->SRIE = (intMask | delay);
+}
+#endif /* FSL_FEATURE_RCM_HAS_SRIE */
+/*@}*/
+
+#if defined(__cplusplus)
+}
+#endif /* __cplusplus*/
+
+/*! @}*/
+
+#endif /* _FSL_RCM_H_ */