Diff: TARGET_NUCLEO_L496ZG_P/TOOLCHAIN_GCC_ARM/stm32l4xx_hal_pwr.h

Revision:

171:3a7713b1edbc

Parent:

165:d1b4690b3f8b

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L496ZG_P/TOOLCHAIN_GCC_ARM/stm32l4xx_hal_pwr.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,427 @@
+/**
+  ******************************************************************************
+  * @file    stm32l4xx_hal_pwr.h
+  * @author  MCD Application Team
+  * @brief   Header file of PWR HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_HAL_PWR_H
+#define __STM32L4xx_HAL_PWR_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal_def.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup PWR
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+
+/** @defgroup PWR_Exported_Types PWR Exported Types
+  * @{
+  */
+
+/**
+  * @brief  PWR PVD configuration structure definition
+  */
+typedef struct
+{
+  uint32_t PVDLevel;   /*!< PVDLevel: Specifies the PVD detection level.
+                            This parameter can be a value of @ref PWR_PVD_detection_level. */
+
+  uint32_t Mode;      /*!< Mode: Specifies the operating mode for the selected pins.
+                           This parameter can be a value of @ref PWR_PVD_Mode. */
+}PWR_PVDTypeDef;
+
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup PWR_Exported_Constants PWR Exported Constants
+  * @{
+  */
+
+
+/** @defgroup PWR_PVD_detection_level Programmable Voltage Detection levels
+  * @{
+  */
+#define PWR_PVDLEVEL_0                  PWR_CR2_PLS_LEV0  /*!< PVD threshold around 2.0 V */
+#define PWR_PVDLEVEL_1                  PWR_CR2_PLS_LEV1  /*!< PVD threshold around 2.2 V */
+#define PWR_PVDLEVEL_2                  PWR_CR2_PLS_LEV2  /*!< PVD threshold around 2.4 V */
+#define PWR_PVDLEVEL_3                  PWR_CR2_PLS_LEV3  /*!< PVD threshold around 2.5 V */
+#define PWR_PVDLEVEL_4                  PWR_CR2_PLS_LEV4  /*!< PVD threshold around 2.6 V */
+#define PWR_PVDLEVEL_5                  PWR_CR2_PLS_LEV5  /*!< PVD threshold around 2.8 V */
+#define PWR_PVDLEVEL_6                  PWR_CR2_PLS_LEV6  /*!< PVD threshold around 2.9 V */
+#define PWR_PVDLEVEL_7                  PWR_CR2_PLS_LEV7  /*!< External input analog voltage (compared internally to VREFINT) */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_PVD_Mode  PWR PVD interrupt and event mode
+  * @{
+  */
+#define PWR_PVD_MODE_NORMAL                 ((uint32_t)0x00000000)   /*!< Basic mode is used */
+#define PWR_PVD_MODE_IT_RISING              ((uint32_t)0x00010001)   /*!< External Interrupt Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_IT_FALLING             ((uint32_t)0x00010002)   /*!< External Interrupt Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_IT_RISING_FALLING      ((uint32_t)0x00010003)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING           ((uint32_t)0x00020001)   /*!< Event Mode with Rising edge trigger detection */
+#define PWR_PVD_MODE_EVENT_FALLING          ((uint32_t)0x00020002)   /*!< Event Mode with Falling edge trigger detection */
+#define PWR_PVD_MODE_EVENT_RISING_FALLING   ((uint32_t)0x00020003)   /*!< Event Mode with Rising/Falling edge trigger detection */                               
+/**
+  * @}
+  */
+  
+  
+
+
+/** @defgroup PWR_Regulator_state_in_SLEEP_STOP_mode  PWR regulator mode
+  * @{
+  */
+#define PWR_MAINREGULATOR_ON            ((uint32_t)0x00000000) /*!< Regulator in main mode      */
+#define PWR_LOWPOWERREGULATOR_ON        PWR_CR1_LPR            /*!< Regulator in low-power mode */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_SLEEP_mode_entry  PWR SLEEP mode entry
+  * @{
+  */
+#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01)        /*!< Wait For Interruption instruction to enter Sleep mode */
+#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02)        /*!< Wait For Event instruction to enter Sleep mode        */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_STOP_mode_entry  PWR STOP mode entry
+  * @{
+  */
+#define PWR_STOPENTRY_WFI               ((uint8_t)0x01)       /*!< Wait For Interruption instruction to enter Stop mode */
+#define PWR_STOPENTRY_WFE               ((uint8_t)0x02)       /*!< Wait For Event instruction to enter Stop mode        */
+/**
+  * @}
+  */
+  
+
+/** @defgroup PWR_PVD_EXTI_LINE  PWR PVD external interrupt line
+  * @{
+  */
+#define PWR_EXTI_LINE_PVD  ((uint32_t)0x00010000)   /*!< External interrupt line 16 Connected to the PVD EXTI Line */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_PVD_EVENT_LINE  PWR PVD event line
+  * @{
+  */  
+#define PWR_EVENT_LINE_PVD  ((uint32_t)0x00010000)  /*!< Event line 16 Connected to the PVD Event Line */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PWR_Exported_Macros  PWR Exported Macros
+  * @{
+  */
+
+/** @brief  Check whether or not a specific PWR flag is set.
+  * @param  __FLAG__: specifies the flag to check.
+  *           This parameter can be one of the following values:
+  *            @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event
+  *                  was received from the WKUP pin 1.
+  *            @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event
+  *                  was received from the WKUP pin 2.
+  *            @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event
+  *                  was received from the WKUP pin 3.
+  *            @arg @ref PWR_FLAG_WUF4 Wake Up Flag 4. Indicates that a wakeup event
+  *                  was received from the WKUP pin 4.
+  *            @arg @ref PWR_FLAG_WUF5 Wake Up Flag 5. Indicates that a wakeup event
+  *                  was received from the WKUP pin 5.          
+  *            @arg @ref PWR_FLAG_SB StandBy Flag. Indicates that the system
+  *                  entered StandBy mode.
+  *            @arg @ref PWR_FLAG_WUFI Wake-Up Flag Internal. Set when a wakeup is detected on
+  *                 the internal wakeup line.
+  *            @arg @ref PWR_FLAG_REGLPS Low Power Regulator Started. Indicates whether or not the 
+  *                 low-power regulator is ready.
+  *            @arg @ref PWR_FLAG_REGLPF Low Power Regulator Flag. Indicates whether the 
+  *                 regulator is ready in main mode or is in low-power mode. 
+  *            @arg @ref PWR_FLAG_VOSF Voltage Scaling Flag. Indicates whether the regulator is ready 
+  *                 in the selected voltage range or is still changing to the required voltage level.
+  *            @arg @ref PWR_FLAG_PVDO Power Voltage Detector Output. Indicates whether VDD voltage is
+  *                  below or above the selected PVD threshold.
+  *            @arg @ref PWR_FLAG_PVMO1 Peripheral Voltage Monitoring Output 1. Indicates whether VDDUSB voltage is
+  *                  is below or above PVM1 threshold (applicable when USB feature is supported).
+  @if STM32L486xx
+  *            @arg @ref PWR_FLAG_PVMO2 Peripheral Voltage Monitoring Output 2. Indicates whether VDDIO2 voltage is
+  *                  is below or above PVM2 threshold (applicable when VDDIO2 is present on device). 
+  @endif
+  *            @arg @ref PWR_FLAG_PVMO3 Peripheral Voltage Monitoring Output 3. Indicates whether VDDA voltage is
+  *                  is below or above PVM3 threshold. 
+  *            @arg @ref PWR_FLAG_PVMO4 Peripheral Voltage Monitoring Output 4. Indicates whether VDDA voltage is
+  *                  is below or above PVM4 threshold.                           
+  *    
+  * @retval The new state of __FLAG__ (TRUE or FALSE).
+  */
+#define __HAL_PWR_GET_FLAG(__FLAG__)  ( ((((uint8_t)(__FLAG__)) >> 5U) == 1)  ?\
+                                      (PWR->SR1 & (1U << ((__FLAG__) & 31U))) :\
+                                      (PWR->SR2 & (1U << ((__FLAG__) & 31U))) )
+
+/** @brief  Clear a specific PWR flag.
+  * @param  __FLAG__: specifies the flag to clear.
+  *          This parameter can be one of the following values:
+  *            @arg @ref PWR_FLAG_WUF1 Wake Up Flag 1. Indicates that a wakeup event
+  *                  was received from the WKUP pin 1.
+  *            @arg @ref PWR_FLAG_WUF2 Wake Up Flag 2. Indicates that a wakeup event
+  *                  was received from the WKUP pin 2.
+  *            @arg @ref PWR_FLAG_WUF3 Wake Up Flag 3. Indicates that a wakeup event
+  *                  was received from the WKUP pin 3.
+  *            @arg @ref PWR_FLAG_WUF4 Wake Up Flag 4. Indicates that a wakeup event
+  *                  was received from the WKUP pin 4.
+  *            @arg @ref PWR_FLAG_WUF5 Wake Up Flag 5. Indicates that a wakeup event
+  *                  was received from the WKUP pin 5.
+  *            @arg @ref PWR_FLAG_WU Encompasses all five Wake Up Flags.
+  *            @arg @ref PWR_FLAG_SB Standby Flag. Indicates that the system
+  *                  entered Standby mode.
+  * @retval None   
+  */
+#define __HAL_PWR_CLEAR_FLAG(__FLAG__)   ( (((uint8_t)(__FLAG__)) == PWR_FLAG_WU) ?\
+                                         (PWR->SCR  = (__FLAG__)) :\
+                                         (PWR->SCR = (1U << ((__FLAG__) & 31U))) )
+/**
+  * @brief Enable the PVD Extended Interrupt Line.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_IT()   SET_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Disable the PVD Extended Interrupt Line.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_IT()  CLEAR_BIT(EXTI->IMR1, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Enable the PVD Event Line.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT()   SET_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD)
+
+/**
+  * @brief Disable the PVD Event Line.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT()  CLEAR_BIT(EXTI->EMR1, PWR_EVENT_LINE_PVD)
+
+/**
+  * @brief Enable the PVD Extended Interrupt Rising Trigger.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE()   SET_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising Trigger.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE()  CLEAR_BIT(EXTI->RTSR1, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Enable the PVD Extended Interrupt Falling Trigger.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE()   SET_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief Disable the PVD Extended Interrupt Falling Trigger.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE()  CLEAR_BIT(EXTI->FTSR1, PWR_EXTI_LINE_PVD)
+
+
+/**
+  * @brief  Enable the PVD Extended Interrupt Rising & Falling Trigger.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE()  \
+  do {                                                   \
+    __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();             \
+    __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();            \
+  } while(0)
+
+/**
+  * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE()  \
+  do {                                                    \
+    __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();             \
+    __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();            \
+  } while(0)
+
+/**
+  * @brief  Generate a Software interrupt on selected EXTI line.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() SET_BIT(EXTI->SWIER1, PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Check whether or not the PVD EXTI interrupt flag is set.
+  * @retval EXTI PVD Line Status.
+  */
+#define __HAL_PWR_PVD_EXTI_GET_FLAG()  (EXTI->PR1 & PWR_EXTI_LINE_PVD)
+
+/**
+  * @brief Clear the PVD EXTI interrupt flag.
+  * @retval None
+  */
+#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG()  WRITE_REG(EXTI->PR1, PWR_EXTI_LINE_PVD)
+
+/**
+  * @}
+  */
+  
+
+/* Private macros --------------------------------------------------------*/
+/** @addtogroup  PWR_Private_Macros   PWR Private Macros
+  * @{
+  */
+
+#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
+                                 ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
+                                 
+#define IS_PWR_PVD_MODE(MODE)  (((MODE) == PWR_PVD_MODE_NORMAL)              ||\
+                                ((MODE) == PWR_PVD_MODE_IT_RISING)           ||\
+                                ((MODE) == PWR_PVD_MODE_IT_FALLING)          ||\
+                                ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING)   ||\
+                                ((MODE) == PWR_PVD_MODE_EVENT_RISING)        ||\
+                                ((MODE) == PWR_PVD_MODE_EVENT_FALLING)       ||\
+                                ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING)) 
+                                
+#define IS_PWR_REGULATOR(REGULATOR)      (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
+                                          ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
+                                          
+#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
+
+#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE) )
+                                      
+/**
+  * @}
+  */  
+
+/* Include PWR HAL Extended module */
+#include "stm32l4xx_hal_pwr_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup PWR_Exported_Functions PWR Exported Functions
+  * @{
+  */
+  
+/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions 
+  * @{
+  */
+  
+/* Initialization and de-initialization functions *******************************/
+void HAL_PWR_DeInit(void);
+void HAL_PWR_EnableBkUpAccess(void);
+void HAL_PWR_DisableBkUpAccess(void);
+
+/**
+  * @}
+  */
+
+/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions 
+  * @{
+  */
+
+/* Peripheral Control functions  ************************************************/
+HAL_StatusTypeDef HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD);
+void HAL_PWR_EnablePVD(void);
+void HAL_PWR_DisablePVD(void);
+
+
+/* WakeUp pins configuration functions ****************************************/
+void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinPolarity);
+void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
+
+/* Low Power modes configuration functions ************************************/
+void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
+void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
+void HAL_PWR_EnterSTANDBYMode(void);
+
+void HAL_PWR_EnableSleepOnExit(void);
+void HAL_PWR_DisableSleepOnExit(void);
+void HAL_PWR_EnableSEVOnPend(void);
+void HAL_PWR_DisableSEVOnPend(void);
+
+void HAL_PWR_PVDCallback(void);
+
+
+/**
+  * @}
+  */
+  
+/**
+  * @}
+  */  
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32L4xx_HAL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/