mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_L496ZG_P/TOOLCHAIN_GCC_ARM/stm32l4xx_hal_pcd.h
- Revision:
- 171:3a7713b1edbc
- Parent:
- 165:d1b4690b3f8b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L496ZG_P/TOOLCHAIN_GCC_ARM/stm32l4xx_hal_pcd.h Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,882 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_hal_pcd.h
+ * @author MCD Application Team
+ * @brief Header file of PCD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_HAL_PCD_H
+#define __STM32L4xx_HAL_PCD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32L432xx) || defined(STM32L433xx) || defined(STM32L442xx) || defined(STM32L443xx) || \
+ defined(STM32L452xx) || defined(STM32L462xx) || \
+ defined(STM32L475xx) || defined(STM32L476xx) || defined(STM32L485xx) || defined(STM32L486xx) || \
+ defined(STM32L496xx) || defined(STM32L4A6xx) || \
+ defined(STM32L4R5xx) || defined(STM32L4R7xx) || defined(STM32L4R9xx) || defined(STM32L4S5xx) || defined(STM32L4S7xx) || defined(STM32L4S9xx)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_ll_usb.h"
+
+/** @addtogroup STM32L4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup PCD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup PCD_Exported_Types PCD Exported Types
+ * @{
+ */
+
+ /**
+ * @brief PCD State structure definition
+ */
+typedef enum
+{
+ HAL_PCD_STATE_RESET = 0x00,
+ HAL_PCD_STATE_READY = 0x01,
+ HAL_PCD_STATE_ERROR = 0x02,
+ HAL_PCD_STATE_BUSY = 0x03,
+ HAL_PCD_STATE_TIMEOUT = 0x04
+} PCD_StateTypeDef;
+
+/* Device LPM suspend state */
+typedef enum
+{
+ LPM_L0 = 0x00, /* on */
+ LPM_L1 = 0x01, /* LPM L1 sleep */
+ LPM_L2 = 0x02, /* suspend */
+ LPM_L3 = 0x03, /* off */
+}PCD_LPM_StateTypeDef;
+
+#if defined (USB)
+/**
+ * @brief PCD double buffered endpoint direction
+ */
+typedef enum
+{
+ PCD_EP_DBUF_OUT,
+ PCD_EP_DBUF_IN,
+ PCD_EP_DBUF_ERR,
+}PCD_EP_DBUF_DIR;
+
+/**
+ * @brief PCD endpoint buffer number
+ */
+typedef enum
+{
+ PCD_EP_NOBUF,
+ PCD_EP_BUF0,
+ PCD_EP_BUF1
+}PCD_EP_BUF_NUM;
+#endif /* USB */
+
+#if defined (USB_OTG_FS)
+typedef USB_OTG_GlobalTypeDef PCD_TypeDef;
+typedef USB_OTG_CfgTypeDef PCD_InitTypeDef;
+typedef USB_OTG_EPTypeDef PCD_EPTypeDef;
+#endif /* USB_OTG_FS */
+
+#if defined (USB)
+typedef USB_TypeDef PCD_TypeDef;
+typedef USB_CfgTypeDef PCD_InitTypeDef;
+typedef USB_EPTypeDef PCD_EPTypeDef;
+#endif /* USB */
+
+// Added for MBED PR #3062
+typedef struct
+{
+ HAL_LockTypeDef Lock;
+} PCD_EPLockDef;
+
+/**
+ * @brief PCD Handle Structure definition
+ */
+typedef struct
+{
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ __IO uint8_t USB_Address; /*!< USB Address: not used by USB OTG FS */
+ PCD_EPTypeDef IN_ep[15]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[15]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+// Added for MBED PR #3062
+ PCD_EPLockDef EPLock[15];
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+ PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */
+ uint32_t BESL;
+
+
+ uint32_t lpm_active; /*!< Enable or disable the Link Power Management .
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t battery_charging_active; /*!< Enable or disable Battery charging.
+ This parameter can be set to ENABLE or DISABLE */
+ void *pData; /*!< Pointer to upper stack Handler */
+
+} PCD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Include PCD HAL Extended module */
+#include "stm32l4xx_hal_pcd_ex.h"
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
+ * @{
+ */
+
+/** @defgroup PCD_Speed PCD Speed
+ * @{
+ */
+#define PCD_SPEED_FULL 1
+/**
+ * @}
+ */
+
+/** @defgroup PCD_PHY_Module PCD PHY Module
+ * @{
+ */
+#define PCD_PHY_EMBEDDED 1
+/**
+ * @}
+ */
+
+/** @defgroup PCD_Turnaround_Timeout Turnaround Timeout Value
+ * @{
+ */
+#ifndef USBD_FS_TRDT_VALUE
+ #define USBD_FS_TRDT_VALUE 5
+#endif /* USBD_FS_TRDT_VALUE */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#if defined (USB_OTG_FS)
+#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
+
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) &= (__INTERRUPT__))
+#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0)
+
+
+#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \
+ ~(USB_OTG_PCGCCTL_STOPCLK)
+
+#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK
+
+#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR1 |= USB_OTG_FS_WAKEUP_EXTI_LINE
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR1 &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR1 & (USB_OTG_FS_WAKEUP_EXTI_LINE)
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR1 = USB_OTG_FS_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() do {\
+ EXTI->FTSR1 &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR1 |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+ } while(0)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() do {\
+ EXTI->FTSR1 |= (USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR1 &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ } while(0)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() do {\
+ EXTI->RTSR1 &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->FTSR1 &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR1 |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+ EXTI->FTSR1 |= USB_OTG_FS_WAKEUP_EXTI_LINE;\
+ } while(0)
+
+#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER1 |= USB_OTG_FS_WAKEUP_EXTI_LINE)
+
+#endif /* USB_OTG_FS */
+
+#if defined (USB)
+#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance)
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
+
+#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR1 |= USB_WAKEUP_EXTI_LINE
+#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR1 &= ~(USB_WAKEUP_EXTI_LINE)
+#define __HAL_USB_WAKEUP_EXTI_GET_FLAG() EXTI->PR1 & (USB_WAKEUP_EXTI_LINE)
+#define __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR1 = USB_WAKEUP_EXTI_LINE
+
+#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE() do {\
+ EXTI->FTSR1 &= ~(USB_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR1 |= USB_WAKEUP_EXTI_LINE;\
+ } while(0)
+
+#define __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE() do {\
+ EXTI->FTSR1 |= (USB_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR1 &= ~(USB_WAKEUP_EXTI_LINE);\
+ } while(0)
+
+#define __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() do {\
+ EXTI->RTSR1 &= ~(USB_WAKEUP_EXTI_LINE);\
+ EXTI->FTSR1 &= ~(USB_WAKEUP_EXTI_LINE);\
+ EXTI->RTSR1 |= USB_WAKEUP_EXTI_LINE;\
+ EXTI->FTSR1 |= USB_WAKEUP_EXTI_LINE;\
+ } while(0)
+
+#define __HAL_USB_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER1 |= USB_WAKEUP_EXTI_LINE)
+
+#endif /* USB */
+
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions PCD Exported Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* I/O operation functions ***************************************************/
+/* Non-Blocking mode: Interrupt */
+/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
+ * @{
+ */
+ /* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PCD_Private_Constants PCD Private Constants
+ * @{
+ */
+/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt
+ * @{
+ */
+#if defined (USB_OTG_FS)
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE ((uint32_t)0x08)
+#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE ((uint32_t)0x0C)
+#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE ((uint32_t)0x10)
+
+#define USB_OTG_FS_WAKEUP_EXTI_LINE ((uint32_t)0x00020000) /*!< External interrupt line 17 Connected to the USB EXTI Line */
+#endif /* USB_OTG_FS */
+
+#if defined (USB)
+#define USB_WAKEUP_EXTI_LINE ((uint32_t)0x00020000) /*!< External interrupt line 17Connected to the USB EXTI Line */
+#endif /* USB */
+
+/**
+ * @}
+ */
+
+#if defined (USB)
+/** @defgroup PCD_EP0_MPS PCD EP0 MPS
+ * @{
+ */
+#define PCD_EP0MPS_64 DEP0CTL_MPS_64
+#define PCD_EP0MPS_32 DEP0CTL_MPS_32
+#define PCD_EP0MPS_16 DEP0CTL_MPS_16
+#define PCD_EP0MPS_08 DEP0CTL_MPS_8
+/**
+ * @}
+ */
+
+/** @defgroup PCD_ENDP PCD ENDP
+ * @{
+ */
+#define PCD_ENDP0 ((uint8_t)0)
+#define PCD_ENDP1 ((uint8_t)1)
+#define PCD_ENDP2 ((uint8_t)2)
+#define PCD_ENDP3 ((uint8_t)3)
+#define PCD_ENDP4 ((uint8_t)4)
+#define PCD_ENDP5 ((uint8_t)5)
+#define PCD_ENDP6 ((uint8_t)6)
+#define PCD_ENDP7 ((uint8_t)7)
+/**
+ * @}
+ */
+
+/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind
+ * @{
+ */
+#define PCD_SNG_BUF 0
+#define PCD_DBL_BUF 1
+/**
+ * @}
+ */
+#endif /* USB */
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup PCD_Private_Macros PCD Private Macros
+ * @{
+ */
+#if defined (USB)
+/* SetENDPOINT */
+#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue) (*(&(USBx)->EP0R + (bEpNum) * 2)= (uint16_t)(wRegValue))
+
+/* GetENDPOINT */
+#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(&(USBx)->EP0R + (bEpNum) * 2))
+
+/* ENDPOINT transfer */
+#define USB_EP0StartXfer USB_EPStartXfer
+
+/**
+ * @brief sets the type in the endpoint register(bits EP_TYPE[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wType: Endpoint Type.
+ * @retval None
+ */
+#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) )))
+
+/**
+ * @brief gets the type in the endpoint register(bits EP_TYPE[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval Endpoint Type
+ */
+#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD)
+
+/**
+ * @brief free buffer used from the application realizing it to the line
+ toggles bit SW_BUF in the double buffered endpoint register
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bDir: Direction
+ * @retval None
+ */
+#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\
+{\
+ if ((bDir) == PCD_EP_DBUF_OUT)\
+ { /* OUT double buffered endpoint */\
+ PCD_TX_DTOG((USBx), (bEpNum));\
+ }\
+ else if ((bDir) == PCD_EP_DBUF_IN)\
+ { /* IN double buffered endpoint */\
+ PCD_RX_DTOG((USBx), (bEpNum));\
+ }\
+}
+
+/**
+ * @brief gets direction of the double buffered endpoint
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval EP_DBUF_OUT, EP_DBUF_IN,
+ * EP_DBUF_ERR if the endpoint counter not yet programmed.
+ */
+#define PCD_GET_DB_DIR(USBx, bEpNum)\
+{\
+ if ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum)) & 0xFC00) != 0)\
+ return(PCD_EP_DBUF_OUT);\
+ else if (((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x03FF) != 0)\
+ return(PCD_EP_DBUF_IN);\
+ else\
+ return(PCD_EP_DBUF_ERR);\
+}
+
+/**
+ * @brief sets the status for tx transfer (bits STAT_TX[1:0]).
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wState: new state
+ * @retval None
+ */
+#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) { register uint16_t _wRegVal;\
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK;\
+ /* toggle first bit ? */ \
+ if((USB_EPTX_DTOG1 & (wState))!= 0)\
+ { \
+ _wRegVal ^= USB_EPTX_DTOG1; \
+ } \
+ /* toggle second bit ? */ \
+ if((USB_EPTX_DTOG2 & (wState))!= 0) \
+ { \
+ _wRegVal ^= USB_EPTX_DTOG2; \
+ } \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX));\
+ } /* PCD_SET_EP_TX_STATUS */
+
+/**
+ * @brief sets the status for rx transfer (bits STAT_TX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wState: new state
+ * @retval None
+ */
+#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) {\
+ register uint16_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK;\
+ /* toggle first bit ? */ \
+ if((USB_EPRX_DTOG1 & (wState))!= 0) \
+ { \
+ _wRegVal ^= USB_EPRX_DTOG1; \
+ } \
+ /* toggle second bit ? */ \
+ if((USB_EPRX_DTOG2 & (wState))!= 0) \
+ { \
+ _wRegVal ^= USB_EPRX_DTOG2; \
+ } \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
+ } /* PCD_SET_EP_RX_STATUS */
+
+/**
+ * @brief sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wStaterx: new state.
+ * @param wStatetx: new state.
+ * @retval None
+ */
+#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) {\
+ register uint32_t _wRegVal; \
+ \
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\
+ /* toggle first bit ? */ \
+ if((USB_EPRX_DTOG1 & ((wStaterx)))!= 0) \
+ { \
+ _wRegVal ^= USB_EPRX_DTOG1; \
+ } \
+ /* toggle second bit ? */ \
+ if((USB_EPRX_DTOG2 & (wStaterx))!= 0) \
+ { \
+ _wRegVal ^= USB_EPRX_DTOG2; \
+ } \
+ /* toggle first bit ? */ \
+ if((USB_EPTX_DTOG1 & (wStatetx))!= 0) \
+ { \
+ _wRegVal ^= USB_EPTX_DTOG1; \
+ } \
+ /* toggle second bit ? */ \
+ if((USB_EPTX_DTOG2 & (wStatetx))!= 0) \
+ { \
+ _wRegVal ^= USB_EPTX_DTOG2; \
+ } \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX); \
+ } /* PCD_SET_EP_TXRX_STATUS */
+
+/**
+ * @brief gets the status for tx/rx transfer (bits STAT_TX[1:0]
+ * /STAT_RX[1:0])
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval status
+ */
+#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT)
+#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT)
+
+/**
+ * @brief sets directly the VALID tx/rx-status into the endpoint register
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID))
+#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID))
+
+/**
+ * @brief checks stall condition in an endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval TRUE = endpoint in stall condition.
+ */
+#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) \
+ == USB_EP_TX_STALL)
+#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) \
+ == USB_EP_RX_STALL)
+
+/**
+ * @brief set & clear EP_KIND bit.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ (USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT((USBx), (bEpNum)) | USB_EP_KIND) & USB_EPREG_MASK))))
+#define PCD_CLEAR_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ (USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK))))
+
+/**
+ * @brief Sets/clears directly STATUS_OUT bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
+#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
+
+/**
+ * @brief Sets/clears directly EP_KIND bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
+#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
+
+/**
+ * @brief Clears bit CTR_RX / CTR_TX in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0x7FFF & USB_EPREG_MASK))
+#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0xFF7F & USB_EPREG_MASK))
+
+/**
+ * @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_RX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK)))
+#define PCD_TX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK)))
+
+/**
+ * @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_RX) != 0)\
+ { \
+ PCD_RX_DTOG((USBx), (bEpNum)); \
+ }
+#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_TX) != 0)\
+ { \
+ PCD_TX_DTOG((USBx), (bEpNum)); \
+ }
+
+/**
+ * @brief Sets address in an endpoint register.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bAddr: Address.
+ * @retval None
+ */
+#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr))
+
+#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD))
+
+#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8)+ ((uint32_t)(USBx) + 0x400)))
+#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+2)+ ((uint32_t)(USBx) + 0x400)))
+#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+4)+ ((uint32_t)(USBx) + 0x400)))
+#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+6)+ ((uint32_t)(USBx) + 0x400)))
+
+#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\
+ uint16_t *pdwReg = PCD_EP_RX_CNT((USBx), (bEpNum)); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\
+ }
+
+/**
+ * @brief sets address of the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wAddr: address to be set (must be word aligned).
+ * @retval None
+ */
+#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1))
+#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1))
+
+/**
+ * @brief Gets address of the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval address of the buffer.
+ */
+#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum)))
+#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum)))
+
+/**
+ * @brief Sets counter of rx buffer with no. of blocks.
+ * @param dwReg: Register
+ * @param wCount: Counter.
+ * @param wNBlocks: no. of Blocks.
+ * @retval None
+ */
+#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) {\
+ (wNBlocks) = (wCount) >> 5;\
+ if(((wCount) & 0x1f) == 0)\
+ { \
+ (wNBlocks)--;\
+ } \
+ *pdwReg = (uint16_t)((uint16_t)((wNBlocks) << 10) | 0x8000); \
+ }/* PCD_CALC_BLK32 */
+
+#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) {\
+ (wNBlocks) = (wCount) >> 1;\
+ if(((wCount) & 0x1) != 0)\
+ { \
+ (wNBlocks)++;\
+ } \
+ *pdwReg = (uint16_t)((wNBlocks) << 10);\
+ }/* PCD_CALC_BLK2 */
+
+#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount) {\
+ uint16_t wNBlocks;\
+ if((wCount) > 62) \
+ { \
+ PCD_CALC_BLK32((dwReg),(wCount),wNBlocks); \
+ } \
+ else \
+ { \
+ PCD_CALC_BLK2((dwReg),(wCount),wNBlocks); \
+ } \
+ }/* PCD_SET_EP_CNT_RX_REG */
+
+#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) {\
+ uint16_t *pdwReg = PCD_EP_TX_CNT((USBx), (bEpNum)); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\
+ }
+
+/**
+ * @brief sets counter for the tx/rx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wCount: Counter value.
+ * @retval None
+ */
+#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT((USBx), (bEpNum)) = (wCount))
+
+
+/**
+ * @brief gets counter of the tx buffer.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval Counter value
+ */
+#define PCD_GET_EP_TX_CNT(USBx, bEpNum) ((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ff)
+#define PCD_GET_EP_RX_CNT(USBx, bEpNum) ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ff)
+
+/**
+ * @brief Sets buffer 0/1 address in a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wBuf0Addr: buffer 0 address.
+ * @retval Counter value
+ */
+#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr));}
+#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr));}
+
+/**
+ * @brief Sets addresses in a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param wBuf0Addr: buffer 0 address.
+ * @param wBuf1Addr = buffer 1 address.
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \
+ PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr));\
+ PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr));\
+ } /* PCD_SET_EP_DBUF_ADDR */
+
+/**
+ * @brief Gets buffer 0/1 address of a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum)))
+#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum)))
+
+/**
+ * @brief Gets buffer 0/1 address of a double buffer endpoint.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @param bDir: endpoint dir EP_DBUF_OUT = OUT
+ * EP_DBUF_IN = IN
+ * @param wCount: Counter value
+ * @retval None
+ */
+#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) { \
+ if((bDir) == PCD_EP_DBUF_OUT)\
+ /* OUT endpoint */ \
+ {PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum),(wCount));} \
+ else if((bDir) == PCD_EP_DBUF_IN)\
+ /* IN endpoint */ \
+ *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
+ } /* SetEPDblBuf0Count*/
+
+#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) { \
+ if((bDir) == PCD_EP_DBUF_OUT)\
+ {/* OUT endpoint */ \
+ PCD_SET_EP_RX_CNT((USBx), (bEpNum),(wCount)); \
+ } \
+ else if((bDir) == PCD_EP_DBUF_IN)\
+ {/* IN endpoint */ \
+ *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
+ } \
+ } /* SetEPDblBuf1Count */
+
+#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\
+ PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \
+ PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \
+ } /* PCD_SET_EP_DBUF_CNT */
+
+/**
+ * @brief Gets buffer 0/1 rx/tx counter for double buffering.
+ * @param USBx: USB peripheral instance register address.
+ * @param bEpNum: Endpoint Number.
+ * @retval None
+ */
+#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum)))
+#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum)))
+
+#endif /* USB */
+
+#if defined(STM32L432xx) || defined(STM32L433xx) || defined(STM32L442xx) || defined(STM32L443xx) || \
+ defined(STM32L452xx) || defined(STM32L462xx)
+
+/** @defgroup PCD_Instance_definition PCD Instance definition
+ * @{
+ */
+#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
+/**
+ * @}
+ */
+#endif /* STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx || */
+ /* STM32L452xx || STM32L462xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* STM32L432xx || STM32L433xx || STM32L442xx || STM32L443xx || */
+ /* STM32L452xx || STM32L462xx || */
+ /* STM32L475xx || STM32L476xx || STM32L485xx || STM32L486xx || */
+ /* STM32L496xx || STM32L4A6xx || */
+ /* STM32L4R5xx || STM32L4R7xx || STM32L4R9xx || STM32L4S5xx || STM32L4S7xx || STM32L4S9xx */
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32L4xx_HAL_PCD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
