mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_L496ZG_P/TOOLCHAIN_ARM_STD/stm32l4xx_ll_rcc.h
- Revision:
- 171:3a7713b1edbc
- Parent:
- 165:d1b4690b3f8b
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L496ZG_P/TOOLCHAIN_ARM_STD/stm32l4xx_ll_rcc.h Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,5976 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_ll_rcc.h
+ * @author MCD Application Team
+ * @brief Header file of RCC LL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_LL_RCC_H
+#define __STM32L4xx_LL_RCC_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx.h"
+
+/** @addtogroup STM32L4xx_LL_Driver
+ * @{
+ */
+
+#if defined(RCC)
+
+/** @defgroup RCC_LL RCC
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/** @defgroup RCC_LL_Private_Variables RCC Private Variables
+ * @{
+ */
+
+#if defined(RCC_CCIPR2_PLLSAI2DIVR)
+static const uint8_t aRCC_PLLSAI2DIVRPrescTable[4] = {2, 4, 8, 16};
+#endif /* RCC_CCIPR2_PLLSAI2DIVR */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup RCC_LL_Private_Constants RCC Private Constants
+ * @{
+ */
+/* Defines used to perform offsets*/
+/* Offset used to access to RCC_CCIPR and RCC_CCIPR2 registers */
+#define RCC_OFFSET_CCIPR 0U
+#define RCC_OFFSET_CCIPR2 0x14U
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_Private_Macros RCC Private Macros
+ * @{
+ */
+/**
+ * @}
+ */
+#endif /*USE_FULL_LL_DRIVER*/
+
+/* Exported types ------------------------------------------------------------*/
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_Exported_Types RCC Exported Types
+ * @{
+ */
+
+/** @defgroup LL_ES_CLOCK_FREQ Clocks Frequency Structure
+ * @{
+ */
+
+/**
+ * @brief RCC Clocks Frequency Structure
+ */
+typedef struct
+{
+ uint32_t SYSCLK_Frequency; /*!< SYSCLK clock frequency */
+ uint32_t HCLK_Frequency; /*!< HCLK clock frequency */
+ uint32_t PCLK1_Frequency; /*!< PCLK1 clock frequency */
+ uint32_t PCLK2_Frequency; /*!< PCLK2 clock frequency */
+} LL_RCC_ClocksTypeDef;
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup RCC_LL_Exported_Constants RCC Exported Constants
+ * @{
+ */
+
+/** @defgroup RCC_LL_EC_OSC_VALUES Oscillator Values adaptation
+ * @brief Defines used to adapt values of different oscillators
+ * @note These values could be modified in the user environment according to
+ * HW set-up.
+ * @{
+ */
+#if !defined (HSE_VALUE)
+#define HSE_VALUE 8000000U /*!< Value of the HSE oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined (HSI_VALUE)
+#define HSI_VALUE 16000000U /*!< Value of the HSI oscillator in Hz */
+#endif /* HSI_VALUE */
+
+#if !defined (LSE_VALUE)
+#define LSE_VALUE 32768U /*!< Value of the LSE oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined (LSI_VALUE)
+#define LSI_VALUE 32000U /*!< Value of the LSI oscillator in Hz */
+#endif /* LSI_VALUE */
+#if defined(RCC_HSI48_SUPPORT)
+
+#if !defined (HSI48_VALUE)
+#define HSI48_VALUE 48000000U /*!< Value of the HSI48 oscillator in Hz */
+#endif /* HSI48_VALUE */
+#endif /* RCC_HSI48_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_CLEAR_FLAG Clear Flags Defines
+ * @brief Flags defines which can be used with LL_RCC_WriteReg function
+ * @{
+ */
+#define LL_RCC_CICR_LSIRDYC RCC_CICR_LSIRDYC /*!< LSI Ready Interrupt Clear */
+#define LL_RCC_CICR_LSERDYC RCC_CICR_LSERDYC /*!< LSE Ready Interrupt Clear */
+#define LL_RCC_CICR_MSIRDYC RCC_CICR_MSIRDYC /*!< MSI Ready Interrupt Clear */
+#define LL_RCC_CICR_HSIRDYC RCC_CICR_HSIRDYC /*!< HSI Ready Interrupt Clear */
+#define LL_RCC_CICR_HSERDYC RCC_CICR_HSERDYC /*!< HSE Ready Interrupt Clear */
+#define LL_RCC_CICR_PLLRDYC RCC_CICR_PLLRDYC /*!< PLL Ready Interrupt Clear */
+#if defined(RCC_HSI48_SUPPORT)
+#define LL_RCC_CICR_HSI48RDYC RCC_CICR_HSI48RDYC /*!< HSI48 Ready Interrupt Clear */
+#endif /* RCC_HSI48_SUPPORT */
+#define LL_RCC_CICR_PLLSAI1RDYC RCC_CICR_PLLSAI1RDYC /*!< PLLSAI1 Ready Interrupt Clear */
+#if defined(RCC_PLLSAI2_SUPPORT)
+#define LL_RCC_CICR_PLLSAI2RDYC RCC_CICR_PLLSAI2RDYC /*!< PLLSAI2 Ready Interrupt Clear */
+#endif /* RCC_PLLSAI2_SUPPORT */
+#define LL_RCC_CICR_LSECSSC RCC_CICR_LSECSSC /*!< LSE Clock Security System Interrupt Clear */
+#define LL_RCC_CICR_CSSC RCC_CICR_CSSC /*!< Clock Security System Interrupt Clear */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_GET_FLAG Get Flags Defines
+ * @brief Flags defines which can be used with LL_RCC_ReadReg function
+ * @{
+ */
+#define LL_RCC_CIFR_LSIRDYF RCC_CIFR_LSIRDYF /*!< LSI Ready Interrupt flag */
+#define LL_RCC_CIFR_LSERDYF RCC_CIFR_LSERDYF /*!< LSE Ready Interrupt flag */
+#define LL_RCC_CIFR_MSIRDYF RCC_CIFR_MSIRDYF /*!< MSI Ready Interrupt flag */
+#define LL_RCC_CIFR_HSIRDYF RCC_CIFR_HSIRDYF /*!< HSI Ready Interrupt flag */
+#define LL_RCC_CIFR_HSERDYF RCC_CIFR_HSERDYF /*!< HSE Ready Interrupt flag */
+#define LL_RCC_CIFR_PLLRDYF RCC_CIFR_PLLRDYF /*!< PLL Ready Interrupt flag */
+#if defined(RCC_HSI48_SUPPORT)
+#define LL_RCC_CIFR_HSI48RDYF RCC_CIFR_HSI48RDYF /*!< HSI48 Ready Interrupt flag */
+#endif /* RCC_HSI48_SUPPORT */
+#define LL_RCC_CIFR_PLLSAI1RDYF RCC_CIFR_PLLSAI1RDYF /*!< PLLSAI1 Ready Interrupt flag */
+#if defined(RCC_PLLSAI2_SUPPORT)
+#define LL_RCC_CIFR_PLLSAI2RDYF RCC_CIFR_PLLSAI2RDYF /*!< PLLSAI2 Ready Interrupt flag */
+#endif /* RCC_PLLSAI2_SUPPORT */
+#define LL_RCC_CIFR_LSECSSF RCC_CIFR_LSECSSF /*!< LSE Clock Security System Interrupt flag */
+#define LL_RCC_CIFR_CSSF RCC_CIFR_CSSF /*!< Clock Security System Interrupt flag */
+#define LL_RCC_CSR_FWRSTF RCC_CSR_FWRSTF /*!< Firewall reset flag */
+#define LL_RCC_CSR_LPWRRSTF RCC_CSR_LPWRRSTF /*!< Low-Power reset flag */
+#define LL_RCC_CSR_OBLRSTF RCC_CSR_OBLRSTF /*!< OBL reset flag */
+#define LL_RCC_CSR_PINRSTF RCC_CSR_PINRSTF /*!< PIN reset flag */
+#define LL_RCC_CSR_SFTRSTF RCC_CSR_SFTRSTF /*!< Software Reset flag */
+#define LL_RCC_CSR_IWDGRSTF RCC_CSR_IWDGRSTF /*!< Independent Watchdog reset flag */
+#define LL_RCC_CSR_WWDGRSTF RCC_CSR_WWDGRSTF /*!< Window watchdog reset flag */
+#define LL_RCC_CSR_BORRSTF RCC_CSR_BORRSTF /*!< BOR reset flag */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_IT IT Defines
+ * @brief IT defines which can be used with LL_RCC_ReadReg and LL_RCC_WriteReg functions
+ * @{
+ */
+#define LL_RCC_CIER_LSIRDYIE RCC_CIER_LSIRDYIE /*!< LSI Ready Interrupt Enable */
+#define LL_RCC_CIER_LSERDYIE RCC_CIER_LSERDYIE /*!< LSE Ready Interrupt Enable */
+#define LL_RCC_CIER_MSIRDYIE RCC_CIER_MSIRDYIE /*!< MSI Ready Interrupt Enable */
+#define LL_RCC_CIER_HSIRDYIE RCC_CIER_HSIRDYIE /*!< HSI Ready Interrupt Enable */
+#define LL_RCC_CIER_HSERDYIE RCC_CIER_HSERDYIE /*!< HSE Ready Interrupt Enable */
+#define LL_RCC_CIER_PLLRDYIE RCC_CIER_PLLRDYIE /*!< PLL Ready Interrupt Enable */
+#if defined(RCC_HSI48_SUPPORT)
+#define LL_RCC_CIER_HSI48RDYIE RCC_CIER_HSI48RDYIE /*!< HSI48 Ready Interrupt Enable */
+#endif /* RCC_HSI48_SUPPORT */
+#define LL_RCC_CIER_PLLSAI1RDYIE RCC_CIER_PLLSAI1RDYIE /*!< PLLSAI1 Ready Interrupt Enable */
+#if defined(RCC_PLLSAI2_SUPPORT)
+#define LL_RCC_CIER_PLLSAI2RDYIE RCC_CIER_PLLSAI2RDYIE /*!< PLLSAI2 Ready Interrupt Enable */
+#endif /* RCC_PLLSAI2_SUPPORT */
+#define LL_RCC_CIER_LSECSSIE RCC_CIER_LSECSSIE /*!< LSE CSS Interrupt Enable */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_LSEDRIVE LSE oscillator drive capability
+ * @{
+ */
+#define LL_RCC_LSEDRIVE_LOW 0x00000000U /*!< Xtal mode lower driving capability */
+#define LL_RCC_LSEDRIVE_MEDIUMLOW RCC_BDCR_LSEDRV_0 /*!< Xtal mode medium low driving capability */
+#define LL_RCC_LSEDRIVE_MEDIUMHIGH RCC_BDCR_LSEDRV_1 /*!< Xtal mode medium high driving capability */
+#define LL_RCC_LSEDRIVE_HIGH RCC_BDCR_LSEDRV /*!< Xtal mode higher driving capability */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_MSIRANGE MSI clock ranges
+ * @{
+ */
+#define LL_RCC_MSIRANGE_0 RCC_CR_MSIRANGE_0 /*!< MSI = 100 KHz */
+#define LL_RCC_MSIRANGE_1 RCC_CR_MSIRANGE_1 /*!< MSI = 200 KHz */
+#define LL_RCC_MSIRANGE_2 RCC_CR_MSIRANGE_2 /*!< MSI = 400 KHz */
+#define LL_RCC_MSIRANGE_3 RCC_CR_MSIRANGE_3 /*!< MSI = 800 KHz */
+#define LL_RCC_MSIRANGE_4 RCC_CR_MSIRANGE_4 /*!< MSI = 1 MHz */
+#define LL_RCC_MSIRANGE_5 RCC_CR_MSIRANGE_5 /*!< MSI = 2 MHz */
+#define LL_RCC_MSIRANGE_6 RCC_CR_MSIRANGE_6 /*!< MSI = 4 MHz */
+#define LL_RCC_MSIRANGE_7 RCC_CR_MSIRANGE_7 /*!< MSI = 8 MHz */
+#define LL_RCC_MSIRANGE_8 RCC_CR_MSIRANGE_8 /*!< MSI = 16 MHz */
+#define LL_RCC_MSIRANGE_9 RCC_CR_MSIRANGE_9 /*!< MSI = 24 MHz */
+#define LL_RCC_MSIRANGE_10 RCC_CR_MSIRANGE_10 /*!< MSI = 32 MHz */
+#define LL_RCC_MSIRANGE_11 RCC_CR_MSIRANGE_11 /*!< MSI = 48 MHz */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_MSISRANGE MSI range after Standby mode
+ * @{
+ */
+#define LL_RCC_MSISRANGE_4 RCC_CSR_MSISRANGE_1 /*!< MSI = 1 MHz */
+#define LL_RCC_MSISRANGE_5 RCC_CSR_MSISRANGE_2 /*!< MSI = 2 MHz */
+#define LL_RCC_MSISRANGE_6 RCC_CSR_MSISRANGE_4 /*!< MSI = 4 MHz */
+#define LL_RCC_MSISRANGE_7 RCC_CSR_MSISRANGE_8 /*!< MSI = 8 MHz */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_LSCO_CLKSOURCE LSCO Selection
+ * @{
+ */
+#define LL_RCC_LSCO_CLKSOURCE_LSI 0x00000000U /*!< LSI selection for low speed clock */
+#define LL_RCC_LSCO_CLKSOURCE_LSE RCC_BDCR_LSCOSEL /*!< LSE selection for low speed clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SYS_CLKSOURCE System clock switch
+ * @{
+ */
+#define LL_RCC_SYS_CLKSOURCE_MSI RCC_CFGR_SW_MSI /*!< MSI selection as system clock */
+#define LL_RCC_SYS_CLKSOURCE_HSI RCC_CFGR_SW_HSI /*!< HSI selection as system clock */
+#define LL_RCC_SYS_CLKSOURCE_HSE RCC_CFGR_SW_HSE /*!< HSE selection as system clock */
+#define LL_RCC_SYS_CLKSOURCE_PLL RCC_CFGR_SW_PLL /*!< PLL selection as system clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SYS_CLKSOURCE_STATUS System clock switch status
+ * @{
+ */
+#define LL_RCC_SYS_CLKSOURCE_STATUS_MSI RCC_CFGR_SWS_MSI /*!< MSI used as system clock */
+#define LL_RCC_SYS_CLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */
+#define LL_RCC_SYS_CLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */
+#define LL_RCC_SYS_CLKSOURCE_STATUS_PLL RCC_CFGR_SWS_PLL /*!< PLL used as system clock */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SYSCLK_DIV AHB prescaler
+ * @{
+ */
+#define LL_RCC_SYSCLK_DIV_1 RCC_CFGR_HPRE_DIV1 /*!< SYSCLK not divided */
+#define LL_RCC_SYSCLK_DIV_2 RCC_CFGR_HPRE_DIV2 /*!< SYSCLK divided by 2 */
+#define LL_RCC_SYSCLK_DIV_4 RCC_CFGR_HPRE_DIV4 /*!< SYSCLK divided by 4 */
+#define LL_RCC_SYSCLK_DIV_8 RCC_CFGR_HPRE_DIV8 /*!< SYSCLK divided by 8 */
+#define LL_RCC_SYSCLK_DIV_16 RCC_CFGR_HPRE_DIV16 /*!< SYSCLK divided by 16 */
+#define LL_RCC_SYSCLK_DIV_64 RCC_CFGR_HPRE_DIV64 /*!< SYSCLK divided by 64 */
+#define LL_RCC_SYSCLK_DIV_128 RCC_CFGR_HPRE_DIV128 /*!< SYSCLK divided by 128 */
+#define LL_RCC_SYSCLK_DIV_256 RCC_CFGR_HPRE_DIV256 /*!< SYSCLK divided by 256 */
+#define LL_RCC_SYSCLK_DIV_512 RCC_CFGR_HPRE_DIV512 /*!< SYSCLK divided by 512 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_APB1_DIV APB low-speed prescaler (APB1)
+ * @{
+ */
+#define LL_RCC_APB1_DIV_1 RCC_CFGR_PPRE1_DIV1 /*!< HCLK not divided */
+#define LL_RCC_APB1_DIV_2 RCC_CFGR_PPRE1_DIV2 /*!< HCLK divided by 2 */
+#define LL_RCC_APB1_DIV_4 RCC_CFGR_PPRE1_DIV4 /*!< HCLK divided by 4 */
+#define LL_RCC_APB1_DIV_8 RCC_CFGR_PPRE1_DIV8 /*!< HCLK divided by 8 */
+#define LL_RCC_APB1_DIV_16 RCC_CFGR_PPRE1_DIV16 /*!< HCLK divided by 16 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_APB2_DIV APB high-speed prescaler (APB2)
+ * @{
+ */
+#define LL_RCC_APB2_DIV_1 RCC_CFGR_PPRE2_DIV1 /*!< HCLK not divided */
+#define LL_RCC_APB2_DIV_2 RCC_CFGR_PPRE2_DIV2 /*!< HCLK divided by 2 */
+#define LL_RCC_APB2_DIV_4 RCC_CFGR_PPRE2_DIV4 /*!< HCLK divided by 4 */
+#define LL_RCC_APB2_DIV_8 RCC_CFGR_PPRE2_DIV8 /*!< HCLK divided by 8 */
+#define LL_RCC_APB2_DIV_16 RCC_CFGR_PPRE2_DIV16 /*!< HCLK divided by 16 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_STOP_WAKEUPCLOCK Wakeup from Stop and CSS backup clock selection
+ * @{
+ */
+#define LL_RCC_STOP_WAKEUPCLOCK_MSI 0x00000000U /*!< MSI selection after wake-up from STOP */
+#define LL_RCC_STOP_WAKEUPCLOCK_HSI RCC_CFGR_STOPWUCK /*!< HSI selection after wake-up from STOP */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_MCO1SOURCE MCO1 SOURCE selection
+ * @{
+ */
+#define LL_RCC_MCO1SOURCE_NOCLOCK 0x00000000U /*!< MCO output disabled, no clock on MCO */
+#define LL_RCC_MCO1SOURCE_SYSCLK RCC_CFGR_MCOSEL_0 /*!< SYSCLK selection as MCO1 source */
+#define LL_RCC_MCO1SOURCE_MSI RCC_CFGR_MCOSEL_1 /*!< MSI selection as MCO1 source */
+#define LL_RCC_MCO1SOURCE_HSI (RCC_CFGR_MCOSEL_0| RCC_CFGR_MCOSEL_1) /*!< HSI16 selection as MCO1 source */
+#define LL_RCC_MCO1SOURCE_HSE RCC_CFGR_MCOSEL_2 /*!< HSE selection as MCO1 source */
+#define LL_RCC_MCO1SOURCE_PLLCLK (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_2) /*!< Main PLL selection as MCO1 source */
+#define LL_RCC_MCO1SOURCE_LSI (RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSI selection as MCO1 source */
+#define LL_RCC_MCO1SOURCE_LSE (RCC_CFGR_MCOSEL_0|RCC_CFGR_MCOSEL_1|RCC_CFGR_MCOSEL_2) /*!< LSE selection as MCO1 source */
+#if defined(RCC_HSI48_SUPPORT)
+#define LL_RCC_MCO1SOURCE_HSI48 RCC_CFGR_MCOSEL_3 /*!< HSI48 selection as MCO1 source */
+#endif /* RCC_HSI48_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_MCO1_DIV MCO1 prescaler
+ * @{
+ */
+#define LL_RCC_MCO1_DIV_1 RCC_CFGR_MCOPRE_DIV1 /*!< MCO not divided */
+#define LL_RCC_MCO1_DIV_2 RCC_CFGR_MCOPRE_DIV2 /*!< MCO divided by 2 */
+#define LL_RCC_MCO1_DIV_4 RCC_CFGR_MCOPRE_DIV4 /*!< MCO divided by 4 */
+#define LL_RCC_MCO1_DIV_8 RCC_CFGR_MCOPRE_DIV8 /*!< MCO divided by 8 */
+#define LL_RCC_MCO1_DIV_16 RCC_CFGR_MCOPRE_DIV16 /*!< MCO divided by 16 */
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_EC_PERIPH_FREQUENCY Peripheral clock frequency
+ * @{
+ */
+#define LL_RCC_PERIPH_FREQUENCY_NO 0x00000000U /*!< No clock enabled for the peripheral */
+#define LL_RCC_PERIPH_FREQUENCY_NA 0xFFFFFFFFU /*!< Frequency cannot be provided as external clock */
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/** @defgroup RCC_LL_EC_USART1_CLKSOURCE Peripheral USART clock source selection
+ * @{
+ */
+#define LL_RCC_USART1_CLKSOURCE_PCLK2 (RCC_CCIPR_USART1SEL << 16U) /*!< PCLK2 clock used as USART1 clock source */
+#define LL_RCC_USART1_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL_0) /*!< SYSCLK clock used as USART1 clock source */
+#define LL_RCC_USART1_CLKSOURCE_HSI ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL_1) /*!< HSI clock used as USART1 clock source */
+#define LL_RCC_USART1_CLKSOURCE_LSE ((RCC_CCIPR_USART1SEL << 16U) | RCC_CCIPR_USART1SEL) /*!< LSE clock used as USART1 clock source */
+#define LL_RCC_USART2_CLKSOURCE_PCLK1 (RCC_CCIPR_USART2SEL << 16U) /*!< PCLK1 clock used as USART2 clock source */
+#define LL_RCC_USART2_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL_0) /*!< SYSCLK clock used as USART2 clock source */
+#define LL_RCC_USART2_CLKSOURCE_HSI ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL_1) /*!< HSI clock used as USART2 clock source */
+#define LL_RCC_USART2_CLKSOURCE_LSE ((RCC_CCIPR_USART2SEL << 16U) | RCC_CCIPR_USART2SEL) /*!< LSE clock used as USART2 clock source */
+#if defined(RCC_CCIPR_USART3SEL)
+#define LL_RCC_USART3_CLKSOURCE_PCLK1 (RCC_CCIPR_USART3SEL << 16U) /*!< PCLK1 clock used as USART3 clock source */
+#define LL_RCC_USART3_CLKSOURCE_SYSCLK ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL_0) /*!< SYSCLK clock used as USART3 clock source */
+#define LL_RCC_USART3_CLKSOURCE_HSI ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL_1) /*!< HSI clock used as USART3 clock source */
+#define LL_RCC_USART3_CLKSOURCE_LSE ((RCC_CCIPR_USART3SEL << 16U) | RCC_CCIPR_USART3SEL) /*!< LSE clock used as USART3 clock source */
+#endif /* RCC_CCIPR_USART3SEL */
+/**
+ * @}
+ */
+
+#if defined(RCC_CCIPR_UART4SEL) || defined(RCC_CCIPR_UART5SEL)
+/** @defgroup RCC_LL_EC_UART4_CLKSOURCE Peripheral UART clock source selection
+ * @{
+ */
+#if defined(RCC_CCIPR_UART4SEL)
+#define LL_RCC_UART4_CLKSOURCE_PCLK1 (RCC_CCIPR_UART4SEL << 16U) /*!< PCLK1 clock used as UART4 clock source */
+#define LL_RCC_UART4_CLKSOURCE_SYSCLK ((RCC_CCIPR_UART4SEL << 16U) | RCC_CCIPR_UART4SEL_0) /*!< SYSCLK clock used as UART4 clock source */
+#define LL_RCC_UART4_CLKSOURCE_HSI ((RCC_CCIPR_UART4SEL << 16U) | RCC_CCIPR_UART4SEL_1) /*!< HSI clock used as UART4 clock source */
+#define LL_RCC_UART4_CLKSOURCE_LSE ((RCC_CCIPR_UART4SEL << 16U) | RCC_CCIPR_UART4SEL) /*!< LSE clock used as UART4 clock source */
+#endif /* RCC_CCIPR_UART4SEL */
+#if defined(RCC_CCIPR_UART5SEL)
+#define LL_RCC_UART5_CLKSOURCE_PCLK1 (RCC_CCIPR_UART5SEL << 16U) /*!< PCLK1 clock used as UART5 clock source */
+#define LL_RCC_UART5_CLKSOURCE_SYSCLK ((RCC_CCIPR_UART5SEL << 16U) | RCC_CCIPR_UART5SEL_0) /*!< SYSCLK clock used as UART5 clock source */
+#define LL_RCC_UART5_CLKSOURCE_HSI ((RCC_CCIPR_UART5SEL << 16U) | RCC_CCIPR_UART5SEL_1) /*!< HSI clock used as UART5 clock source */
+#define LL_RCC_UART5_CLKSOURCE_LSE ((RCC_CCIPR_UART5SEL << 16U) | RCC_CCIPR_UART5SEL) /*!< LSE clock used as UART5 clock source */
+#endif /* RCC_CCIPR_UART5SEL */
+/**
+ * @}
+ */
+#endif /* RCC_CCIPR_UART4SEL || RCC_CCIPR_UART5SEL */
+
+/** @defgroup RCC_LL_EC_LPUART1_CLKSOURCE Peripheral LPUART clock source selection
+ * @{
+ */
+#define LL_RCC_LPUART1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 clock used as LPUART1 clock source */
+#define LL_RCC_LPUART1_CLKSOURCE_SYSCLK RCC_CCIPR_LPUART1SEL_0 /*!< SYSCLK clock used as LPUART1 clock source */
+#define LL_RCC_LPUART1_CLKSOURCE_HSI RCC_CCIPR_LPUART1SEL_1 /*!< HSI clock used as LPUART1 clock source */
+#define LL_RCC_LPUART1_CLKSOURCE_LSE RCC_CCIPR_LPUART1SEL /*!< LSE clock used as LPUART1 clock source */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_I2C1_CLKSOURCE Peripheral I2C clock source selection
+ * @{
+ */
+#define LL_RCC_I2C1_CLKSOURCE_PCLK1 ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C1SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C1 clock source */
+#define LL_RCC_I2C1_CLKSOURCE_SYSCLK ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL_0 >> RCC_CCIPR_I2C1SEL_Pos)) /*!< SYSCLK clock used as I2C1 clock source */
+#define LL_RCC_I2C1_CLKSOURCE_HSI ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL_1 >> RCC_CCIPR_I2C1SEL_Pos)) /*!< HSI clock used as I2C1 clock source */
+#if defined(RCC_CCIPR_I2C2SEL)
+#define LL_RCC_I2C2_CLKSOURCE_PCLK1 ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C2SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C2 clock source */
+#define LL_RCC_I2C2_CLKSOURCE_SYSCLK ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL_0 >> RCC_CCIPR_I2C2SEL_Pos)) /*!< SYSCLK clock used as I2C2 clock source */
+#define LL_RCC_I2C2_CLKSOURCE_HSI ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL_1 >> RCC_CCIPR_I2C2SEL_Pos)) /*!< HSI clock used as I2C2 clock source */
+#endif /* RCC_CCIPR_I2C2SEL */
+#define LL_RCC_I2C3_CLKSOURCE_PCLK1 ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C3SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C3 clock source */
+#define LL_RCC_I2C3_CLKSOURCE_SYSCLK ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL_0 >> RCC_CCIPR_I2C3SEL_Pos)) /*!< SYSCLK clock used as I2C3 clock source */
+#define LL_RCC_I2C3_CLKSOURCE_HSI ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL_1 >> RCC_CCIPR_I2C3SEL_Pos)) /*!< HSI clock used as I2C3 clock source */
+#if defined(RCC_CCIPR2_I2C4SEL)
+#define LL_RCC_I2C4_CLKSOURCE_PCLK1 ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C4SEL_Pos << 16U)) /*!< PCLK1 clock used as I2C4 clock source */
+#define LL_RCC_I2C4_CLKSOURCE_SYSCLK ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL_0 >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< SYSCLK clock used as I2C4 clock source */
+#define LL_RCC_I2C4_CLKSOURCE_HSI ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL_1 >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< HSI clock used as I2C4 clock source */
+#endif /* RCC_CCIPR2_I2C4SEL */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_LPTIM1_CLKSOURCE Peripheral LPTIM clock source selection
+ * @{
+ */
+#define LL_RCC_LPTIM1_CLKSOURCE_PCLK1 RCC_CCIPR_LPTIM1SEL /*!< PCLK1 clock used as LPTIM1 clock source */
+#define LL_RCC_LPTIM1_CLKSOURCE_LSI (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_0 >> 16U)) /*!< LSI clock used as LPTIM1 clock source */
+#define LL_RCC_LPTIM1_CLKSOURCE_HSI (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL_1 >> 16U)) /*!< HSI clock used as LPTIM1 clock source */
+#define LL_RCC_LPTIM1_CLKSOURCE_LSE (RCC_CCIPR_LPTIM1SEL | (RCC_CCIPR_LPTIM1SEL >> 16U)) /*!< LSE clock used as LPTIM1 clock source */
+#define LL_RCC_LPTIM2_CLKSOURCE_PCLK1 RCC_CCIPR_LPTIM2SEL /*!< PCLK1 clock used as LPTIM2 clock source */
+#define LL_RCC_LPTIM2_CLKSOURCE_LSI (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_0 >> 16U)) /*!< LSI clock used as LPTIM2 clock source */
+#define LL_RCC_LPTIM2_CLKSOURCE_HSI (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL_1 >> 16U)) /*!< HSI clock used as LPTIM2 clock source */
+#define LL_RCC_LPTIM2_CLKSOURCE_LSE (RCC_CCIPR_LPTIM2SEL | (RCC_CCIPR_LPTIM2SEL >> 16U)) /*!< LSE clock used as LPTIM2 clock source */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SAI1_CLKSOURCE Peripheral SAI clock source selection
+ * @{
+ */
+#if defined(RCC_CCIPR2_SAI1SEL)
+#define LL_RCC_SAI1_CLKSOURCE_PLL (RCC_CCIPR2_SAI1SEL << 16U) /*!< PLL clock used as SAI1 clock source */
+#define LL_RCC_SAI1_CLKSOURCE_PLLSAI1 ((RCC_CCIPR2_SAI1SEL << 16U) | RCC_CCIPR2_SAI1SEL_0) /*!< PLLSAI1 clock used as SAI1 clock source */
+#define LL_RCC_SAI1_CLKSOURCE_PLLSAI2 ((RCC_CCIPR2_SAI1SEL << 16U) | RCC_CCIPR2_SAI1SEL_1) /*!< PLLSAI2 clock used as SAI1 clock source */
+#define LL_RCC_SAI1_CLKSOURCE_HSI ((RCC_CCIPR2_SAI1SEL << 16U) | RCC_CCIPR2_SAI1SEL_2) /*!< HSI clock used as SAI1 clock source */
+#define LL_RCC_SAI1_CLKSOURCE_PIN ((RCC_CCIPR2_SAI1SEL << 16U) | (RCC_CCIPR2_SAI1SEL_1 | RCC_CCIPR2_SAI1SEL_0)) /*!< External input clock used as SAI1 clock source */
+#else
+#define LL_RCC_SAI1_CLKSOURCE_PLLSAI1 RCC_CCIPR_SAI1SEL /*!< PLLSAI1 clock used as SAI1 clock source */
+#if defined(RCC_PLLSAI2_SUPPORT)
+#define LL_RCC_SAI1_CLKSOURCE_PLLSAI2 (RCC_CCIPR_SAI1SEL | (RCC_CCIPR_SAI1SEL_0 >> 16U)) /*!< PLLSAI2 clock used as SAI1 clock source */
+#endif /* RCC_PLLSAI2_SUPPORT */
+#define LL_RCC_SAI1_CLKSOURCE_PLL (RCC_CCIPR_SAI1SEL | (RCC_CCIPR_SAI1SEL_1 >> 16U)) /*!< PLL clock used as SAI1 clock source */
+#define LL_RCC_SAI1_CLKSOURCE_PIN (RCC_CCIPR_SAI1SEL | (RCC_CCIPR_SAI1SEL >> 16U)) /*!< External input clock used as SAI1 clock source */
+#endif /* RCC_CCIPR2_SAI1SEL */
+
+#if defined(RCC_CCIPR2_SAI2SEL)
+#define LL_RCC_SAI2_CLKSOURCE_PLL (RCC_CCIPR2_SAI2SEL << 16U) /*!< PLL clock used as SAI2 clock source */
+#define LL_RCC_SAI2_CLKSOURCE_PLLSAI1 ((RCC_CCIPR2_SAI2SEL << 16U) | RCC_CCIPR2_SAI2SEL_0) /*!< PLLSAI1 clock used as SAI2 clock source */
+#define LL_RCC_SAI2_CLKSOURCE_PLLSAI2 ((RCC_CCIPR2_SAI2SEL << 16U) | RCC_CCIPR2_SAI2SEL_1) /*!< PLLSAI2 clock used as SAI2 clock source */
+#define LL_RCC_SAI2_CLKSOURCE_HSI ((RCC_CCIPR2_SAI2SEL << 16U) | RCC_CCIPR2_SAI2SEL_2) /*!< HSI clock used as SAI2 clock source */
+#define LL_RCC_SAI2_CLKSOURCE_PIN ((RCC_CCIPR2_SAI2SEL << 16U) | (RCC_CCIPR2_SAI2SEL_1 | RCC_CCIPR2_SAI2SEL_0)) /*!< External input clock used as SAI2 clock source */
+#elif defined(RCC_CCIPR_SAI2SEL)
+#define LL_RCC_SAI2_CLKSOURCE_PLLSAI1 RCC_CCIPR_SAI2SEL /*!< PLLSAI1 clock used as SAI2 clock source */
+#if defined(RCC_PLLSAI2_SUPPORT)
+#define LL_RCC_SAI2_CLKSOURCE_PLLSAI2 (RCC_CCIPR_SAI2SEL | (RCC_CCIPR_SAI2SEL_0 >> 16U)) /*!< PLLSAI2 clock used as SAI2 clock source */
+#endif /* RCC_PLLSAI2_SUPPORT */
+#define LL_RCC_SAI2_CLKSOURCE_PLL (RCC_CCIPR_SAI2SEL | (RCC_CCIPR_SAI2SEL_1 >> 16U)) /*!< PLL clock used as SAI2 clock source */
+#define LL_RCC_SAI2_CLKSOURCE_PIN (RCC_CCIPR_SAI2SEL | (RCC_CCIPR_SAI2SEL >> 16U)) /*!< External input clock used as SAI2 clock source */
+#endif /* RCC_CCIPR2_SAI2SEL */
+/**
+ * @}
+ */
+
+#if defined(RCC_CCIPR2_SDMMCSEL)
+/** @defgroup RCC_LL_EC_SDMMC1_KERNELCLKSOURCE Peripheral SDMMC kernel clock source selection
+ * @{
+ */
+#define LL_RCC_SDMMC1_KERNELCLKSOURCE_48CLK 0x00000000U /*!< 48MHz clock from internal multiplexor used as SDMMC1 clock source */
+#define LL_RCC_SDMMC1_KERNELCLKSOURCE_PLLP RCC_CCIPR2_SDMMCSEL /*!< PLLSAI3CLK clock used as SDMMC1 clock source */
+/**
+ * @}
+ */
+#endif /* RCC_CCIPR2_SDMMCSEL */
+
+/** @defgroup RCC_LL_EC_SDMMC1_CLKSOURCE Peripheral SDMMC clock source selection
+ * @{
+ */
+#if defined(RCC_HSI48_SUPPORT)
+#define LL_RCC_SDMMC1_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock used as SDMMC1 clock source */
+#else
+#define LL_RCC_SDMMC1_CLKSOURCE_NONE 0x00000000U /*!< No clock used as SDMMC1 clock source */
+#endif
+#define LL_RCC_SDMMC1_CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 clock used as SDMMC1 clock source */
+#define LL_RCC_SDMMC1_CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL clock used as SDMMC1 clock source */
+#define LL_RCC_SDMMC1_CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI clock used as SDMMC1 clock source */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_RNG_CLKSOURCE Peripheral RNG clock source selection
+ * @{
+ */
+#if defined(RCC_HSI48_SUPPORT)
+#define LL_RCC_RNG_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock used as RNG clock source */
+#else
+#define LL_RCC_RNG_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RNG clock source */
+#endif
+#define LL_RCC_RNG_CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 clock used as RNG clock source */
+#define LL_RCC_RNG_CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL clock used as RNG clock source */
+#define LL_RCC_RNG_CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI clock used as RNG clock source */
+/**
+ * @}
+ */
+
+#if defined(USB_OTG_FS) || defined(USB)
+/** @defgroup RCC_LL_EC_USB_CLKSOURCE Peripheral USB clock source selection
+ * @{
+ */
+#if defined(RCC_HSI48_SUPPORT)
+#define LL_RCC_USB_CLKSOURCE_HSI48 0x00000000U /*!< HSI48 clock used as USB clock source */
+#else
+#define LL_RCC_USB_CLKSOURCE_NONE 0x00000000U /*!< No clock used as USB clock source */
+#endif
+#define LL_RCC_USB_CLKSOURCE_PLLSAI1 RCC_CCIPR_CLK48SEL_0 /*!< PLLSAI1 clock used as USB clock source */
+#define LL_RCC_USB_CLKSOURCE_PLL RCC_CCIPR_CLK48SEL_1 /*!< PLL clock used as USB clock source */
+#define LL_RCC_USB_CLKSOURCE_MSI RCC_CCIPR_CLK48SEL /*!< MSI clock used as USB clock source */
+/**
+ * @}
+ */
+
+#endif /* USB_OTG_FS || USB */
+
+/** @defgroup RCC_LL_EC_ADC_CLKSOURCE Peripheral ADC clock source selection
+ * @{
+ */
+#define LL_RCC_ADC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as ADC clock source */
+#define LL_RCC_ADC_CLKSOURCE_PLLSAI1 RCC_CCIPR_ADCSEL_0 /*!< PLLSAI1 clock used as ADC clock source */
+#if defined(RCC_PLLSAI2_SUPPORT) && !defined(LTDC)
+#define LL_RCC_ADC_CLKSOURCE_PLLSAI2 RCC_CCIPR_ADCSEL_1 /*!< PLLSAI2 clock used as ADC clock source */
+#endif /* RCC_PLLSAI2_SUPPORT */
+#define LL_RCC_ADC_CLKSOURCE_SYSCLK RCC_CCIPR_ADCSEL /*!< SYSCLK clock used as ADC clock source */
+/**
+ * @}
+ */
+
+#if defined(SWPMI1)
+/** @defgroup RCC_LL_EC_SWPMI1_CLKSOURCE Peripheral SWPMI1 clock source selection
+ * @{
+ */
+#define LL_RCC_SWPMI1_CLKSOURCE_PCLK1 0x00000000U /*!< PCLK1 used as SWPMI1 clock source */
+#define LL_RCC_SWPMI1_CLKSOURCE_HSI RCC_CCIPR_SWPMI1SEL /*!< HSI used as SWPMI1 clock source */
+/**
+ * @}
+ */
+#endif /* SWPMI1 */
+
+#if defined(DFSDM1_Channel0)
+#if defined(RCC_CCIPR2_ADFSDM1SEL)
+/** @defgroup RCC_LL_EC_DFSDM1_AUDIO_CLKSOURCE Peripheral DFSDM1 Audio clock source selection
+ * @{
+ */
+#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1 0x00000000U /*!< SAI1 clock used as DFSDM1 Audio clock */
+#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_HSI RCC_CCIPR2_ADFSDM1SEL_0 /*!< HSI clock used as DFSDM1 Audio clock */
+#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE_MSI RCC_CCIPR2_ADFSDM1SEL_1 /*!< MSI clock used as DFSDM1 Audio clock */
+/**
+ * @}
+ */
+#endif /* RCC_CCIPR2_ADFSDM1SEL */
+
+/** @defgroup RCC_LL_EC_DFSDM1_CLKSOURCE Peripheral DFSDM1 clock source selection
+ * @{
+ */
+#if defined(RCC_CCIPR2_DFSDM1SEL)
+#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 used as DFSDM1 clock source */
+#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK RCC_CCIPR2_DFSDM1SEL /*!< SYSCLK used as DFSDM1 clock source */
+#else
+#define LL_RCC_DFSDM1_CLKSOURCE_PCLK2 0x00000000U /*!< PCLK2 used as DFSDM1 clock source */
+#define LL_RCC_DFSDM1_CLKSOURCE_SYSCLK RCC_CCIPR_DFSDM1SEL /*!< SYSCLK used as DFSDM1 clock source */
+#endif /* RCC_CCIPR2_DFSDM1SEL */
+/**
+ * @}
+ */
+#endif /* DFSDM1_Channel0 */
+
+#if defined(DSI)
+/** @defgroup RCC_LL_EC_DSI_CLKSOURCE Peripheral DSI clock source selection
+ * @{
+ */
+#define LL_RCC_DSI_CLKSOURCE_PHY 0x00000000U /*!< DSI-PHY clock used as DSI byte lane clock source */
+#define LL_RCC_DSI_CLKSOURCE_PLL RCC_CCIPR2_DSISEL /*!< PLL clock used as DSI byte lane clock source */
+/**
+ * @}
+ */
+#endif /* DSI */
+
+#if defined(LTDC)
+/** @defgroup RCC_LL_EC_LTDC_CLKSOURCE Peripheral LTDC clock source selection
+ * @{
+ */
+#define LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV2 0x00000000U /*!< PLLSAI2DIVR divided by 2 used as LTDC clock source */
+#define LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV4 RCC_CCIPR2_PLLSAI2DIVR_0 /*!< PLLSAI2DIVR divided by 4 used as LTDC clock source */
+#define LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV8 RCC_CCIPR2_PLLSAI2DIVR_1 /*!< PLLSAI2DIVR divided by 8 used as LTDC clock source */
+#define LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV16 RCC_CCIPR2_PLLSAI2DIVR /*!< PLLSAI2DIVR divided by 16 used as LTDC clock source */
+/**
+ * @}
+ */
+#endif /* LTDC */
+
+#if defined(OCTOSPI1)
+/** @defgroup RCC_LL_EC_OCTOSPI Peripheral OCTOSPI get clock source
+ * @{
+ */
+#define LL_RCC_OCTOSPI_CLKSOURCE_SYSCLK 0x00000000U /*!< SYSCLK used as OctoSPI clock source */
+#define LL_RCC_OCTOSPI_CLKSOURCE_MSI RCC_CCIPR2_OSPISEL_0 /*!< MSI used as OctoSPI clock source */
+#define LL_RCC_OCTOSPI_CLKSOURCE_PLL RCC_CCIPR2_OSPISEL_1 /*!< PLL used as OctoSPI clock source */
+/**
+ * @}
+ */
+#endif /* OCTOSPI1 */
+
+/** @defgroup RCC_LL_EC_USART1 Peripheral USART get clock source
+ * @{
+ */
+#define LL_RCC_USART1_CLKSOURCE RCC_CCIPR_USART1SEL /*!< USART1 Clock source selection */
+#define LL_RCC_USART2_CLKSOURCE RCC_CCIPR_USART2SEL /*!< USART2 Clock source selection */
+#if defined(RCC_CCIPR_USART3SEL)
+#define LL_RCC_USART3_CLKSOURCE RCC_CCIPR_USART3SEL /*!< USART3 Clock source selection */
+#endif /* RCC_CCIPR_USART3SEL */
+/**
+ * @}
+ */
+
+#if defined(RCC_CCIPR_UART4SEL) || defined(RCC_CCIPR_UART5SEL)
+/** @defgroup RCC_LL_EC_UART4 Peripheral UART get clock source
+ * @{
+ */
+#if defined(RCC_CCIPR_UART4SEL)
+#define LL_RCC_UART4_CLKSOURCE RCC_CCIPR_UART4SEL /*!< UART4 Clock source selection */
+#endif /* RCC_CCIPR_UART4SEL */
+#if defined(RCC_CCIPR_UART5SEL)
+#define LL_RCC_UART5_CLKSOURCE RCC_CCIPR_UART5SEL /*!< UART5 Clock source selection */
+#endif /* RCC_CCIPR_UART5SEL */
+/**
+ * @}
+ */
+#endif /* RCC_CCIPR_UART4SEL || RCC_CCIPR_UART5SEL */
+
+/** @defgroup RCC_LL_EC_LPUART1 Peripheral LPUART get clock source
+ * @{
+ */
+#define LL_RCC_LPUART1_CLKSOURCE RCC_CCIPR_LPUART1SEL /*!< LPUART1 Clock source selection */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_I2C1 Peripheral I2C get clock source
+ * @{
+ */
+#define LL_RCC_I2C1_CLKSOURCE ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C1SEL_Pos << 16U) | (RCC_CCIPR_I2C1SEL >> RCC_CCIPR_I2C1SEL_Pos)) /*!< I2C1 Clock source selection */
+#if defined(RCC_CCIPR_I2C2SEL)
+#define LL_RCC_I2C2_CLKSOURCE ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C2SEL_Pos << 16U) | (RCC_CCIPR_I2C2SEL >> RCC_CCIPR_I2C2SEL_Pos)) /*!< I2C2 Clock source selection */
+#endif /* RCC_CCIPR_I2C2SEL */
+#define LL_RCC_I2C3_CLKSOURCE ((RCC_OFFSET_CCIPR << 24U) | (RCC_CCIPR_I2C3SEL_Pos << 16U) | (RCC_CCIPR_I2C3SEL >> RCC_CCIPR_I2C3SEL_Pos)) /*!< I2C3 Clock source selection */
+#if defined(RCC_CCIPR2_I2C4SEL)
+#define LL_RCC_I2C4_CLKSOURCE ((RCC_OFFSET_CCIPR2 << 24U) | (RCC_CCIPR2_I2C4SEL_Pos << 16U) | (RCC_CCIPR2_I2C4SEL >> RCC_CCIPR2_I2C4SEL_Pos)) /*!< I2C4 Clock source selection */
+#endif /* RCC_CCIPR2_I2C4SEL */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_LPTIM1 Peripheral LPTIM get clock source
+ * @{
+ */
+#define LL_RCC_LPTIM1_CLKSOURCE RCC_CCIPR_LPTIM1SEL /*!< LPTIM1 Clock source selection */
+#define LL_RCC_LPTIM2_CLKSOURCE RCC_CCIPR_LPTIM2SEL /*!< LPTIM2 Clock source selection */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_SAI1 Peripheral SAI get clock source
+ * @{
+ */
+#if defined(RCC_CCIPR2_SAI1SEL)
+#define LL_RCC_SAI1_CLKSOURCE RCC_CCIPR2_SAI1SEL /*!< SAI1 Clock source selection */
+#else
+#define LL_RCC_SAI1_CLKSOURCE RCC_CCIPR_SAI1SEL /*!< SAI1 Clock source selection */
+#endif /* RCC_CCIPR2_SAI1SEL */
+#if defined(RCC_CCIPR2_SAI2SEL)
+#define LL_RCC_SAI2_CLKSOURCE RCC_CCIPR2_SAI2SEL /*!< SAI2 Clock source selection */
+#elif defined(RCC_CCIPR_SAI2SEL)
+#define LL_RCC_SAI2_CLKSOURCE RCC_CCIPR_SAI2SEL /*!< SAI2 Clock source selection */
+#endif /* RCC_CCIPR2_SAI2SEL */
+/**
+ * @}
+ */
+
+#if defined(RCC_CCIPR2_SDMMCSEL)
+/** @defgroup RCC_LL_EC_SDMMC1_KERNEL Peripheral SDMMC get kernel clock source
+ * @{
+ */
+#define LL_RCC_SDMMC1_KERNELCLKSOURCE RCC_CCIPR2_SDMMCSEL /*!< SDMMC1 Kernel Clock source selection */
+/**
+ * @}
+ */
+#endif /* RCC_CCIPR2_SDMMCSEL */
+
+/** @defgroup RCC_LL_EC_SDMMC1 Peripheral SDMMC get clock source
+ * @{
+ */
+#define LL_RCC_SDMMC1_CLKSOURCE RCC_CCIPR_CLK48SEL /*!< SDMMC1 Clock source selection */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_RNG Peripheral RNG get clock source
+ * @{
+ */
+#define LL_RCC_RNG_CLKSOURCE RCC_CCIPR_CLK48SEL /*!< RNG Clock source selection */
+/**
+ * @}
+ */
+
+#if defined(USB_OTG_FS) || defined(USB)
+/** @defgroup RCC_LL_EC_USB Peripheral USB get clock source
+ * @{
+ */
+#define LL_RCC_USB_CLKSOURCE RCC_CCIPR_CLK48SEL /*!< USB Clock source selection */
+/**
+ * @}
+ */
+#endif /* USB_OTG_FS || USB */
+
+/** @defgroup RCC_LL_EC_ADC Peripheral ADC get clock source
+ * @{
+ */
+#define LL_RCC_ADC_CLKSOURCE RCC_CCIPR_ADCSEL /*!< ADC Clock source selection */
+/**
+ * @}
+ */
+
+#if defined(SWPMI1)
+/** @defgroup RCC_LL_EC_SWPMI1 Peripheral SWPMI1 get clock source
+ * @{
+ */
+#define LL_RCC_SWPMI1_CLKSOURCE RCC_CCIPR_SWPMI1SEL /*!< SWPMI1 Clock source selection */
+/**
+ * @}
+ */
+#endif /* SWPMI1 */
+
+#if defined(DFSDM1_Channel0)
+#if defined(RCC_CCIPR2_ADFSDM1SEL)
+/** @defgroup RCC_LL_EC_DFSDM1_AUDIO Peripheral DFSDM1 Audio get clock source
+ * @{
+ */
+#define LL_RCC_DFSDM1_AUDIO_CLKSOURCE RCC_CCIPR2_ADFSDM1SEL /* DFSDM1 Audio Clock source selection */
+/**
+ * @}
+ */
+
+#endif /* RCC_CCIPR2_ADFSDM1SEL */
+/** @defgroup RCC_LL_EC_DFSDM1 Peripheral DFSDM1 get clock source
+ * @{
+ */
+#if defined(RCC_CCIPR2_DFSDM1SEL)
+#define LL_RCC_DFSDM1_CLKSOURCE RCC_CCIPR2_DFSDM1SEL /*!< DFSDM1 Clock source selection */
+#else
+#define LL_RCC_DFSDM1_CLKSOURCE RCC_CCIPR_DFSDM1SEL /*!< DFSDM1 Clock source selection */
+#endif /* RCC_CCIPR2_DFSDM1SEL */
+/**
+ * @}
+ */
+#endif /* DFSDM1_Channel0 */
+
+#if defined(DSI)
+/** @defgroup RCC_LL_EC_DSI Peripheral DSI get clock source
+ * @{
+ */
+#define LL_RCC_DSI_CLKSOURCE RCC_CCIPR2_DSISEL /*!< DSI Clock source selection */
+/**
+ * @}
+ */
+#endif /* DSI */
+
+#if defined(LTDC)
+/** @defgroup RCC_LL_EC_LTDC Peripheral LTDC get clock source
+ * @{
+ */
+#define LL_RCC_LTDC_CLKSOURCE RCC_CCIPR2_PLLSAI2DIVR /*!< LTDC Clock source selection */
+/**
+ * @}
+ */
+#endif /* LTDC */
+
+#if defined(OCTOSPI1)
+/** @defgroup RCC_LL_EC_OCTOSPI Peripheral OCTOSPI get clock source
+ * @{
+ */
+#define LL_RCC_OCTOSPI_CLKSOURCE RCC_CCIPR2_OSPISEL /*!< OctoSPI Clock source selection */
+/**
+ * @}
+ */
+#endif /* OCTOSPI1 */
+
+
+/** @defgroup RCC_LL_EC_RTC_CLKSOURCE RTC clock source selection
+ * @{
+ */
+#define LL_RCC_RTC_CLKSOURCE_NONE 0x00000000U /*!< No clock used as RTC clock */
+#define LL_RCC_RTC_CLKSOURCE_LSE RCC_BDCR_RTCSEL_0 /*!< LSE oscillator clock used as RTC clock */
+#define LL_RCC_RTC_CLKSOURCE_LSI RCC_BDCR_RTCSEL_1 /*!< LSI oscillator clock used as RTC clock */
+#define LL_RCC_RTC_CLKSOURCE_HSE_DIV32 RCC_BDCR_RTCSEL /*!< HSE oscillator clock divided by 32 used as RTC clock */
+/**
+ * @}
+ */
+
+
+/** @defgroup RCC_LL_EC_PLLSOURCE PLL, PLLSAI1 and PLLSAI2 entry clock source
+ * @{
+ */
+#define LL_RCC_PLLSOURCE_NONE 0x00000000U /*!< No clock */
+#define LL_RCC_PLLSOURCE_MSI RCC_PLLCFGR_PLLSRC_MSI /*!< MSI clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI /*!< HSI16 clock selected as PLL entry clock source */
+#define LL_RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE /*!< HSE clock selected as PLL entry clock source */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLM_DIV PLL division factor
+ * @{
+ */
+#define LL_RCC_PLLM_DIV_1 0x00000000U /*!< Main PLL division factor for PLLM input by 1 */
+#define LL_RCC_PLLM_DIV_2 (RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 2 */
+#define LL_RCC_PLLM_DIV_3 (RCC_PLLCFGR_PLLM_1) /*!< Main PLL division factor for PLLM input by 3 */
+#define LL_RCC_PLLM_DIV_4 (RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 4 */
+#define LL_RCC_PLLM_DIV_5 (RCC_PLLCFGR_PLLM_2) /*!< Main PLL division factor for PLLM input by 5 */
+#define LL_RCC_PLLM_DIV_6 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 6 */
+#define LL_RCC_PLLM_DIV_7 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< Main PLL division factor for PLLM input by 7 */
+#define LL_RCC_PLLM_DIV_8 (RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 8 */
+#if defined(RCC_PLLM_DIV_1_16_SUPPORT)
+#define LL_RCC_PLLM_DIV_9 (RCC_PLLCFGR_PLLM_3) /*!< Main PLL division factor for PLLM input by 9 */
+#define LL_RCC_PLLM_DIV_10 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 10 */
+#define LL_RCC_PLLM_DIV_11 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1) /*!< Main PLL division factor for PLLM input by 11 */
+#define LL_RCC_PLLM_DIV_12 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 12 */
+#define LL_RCC_PLLM_DIV_13 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2) /*!< Main PLL division factor for PLLM input by 13 */
+#define LL_RCC_PLLM_DIV_14 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 14 */
+#define LL_RCC_PLLM_DIV_15 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1) /*!< Main PLL division factor for PLLM input by 15 */
+#define LL_RCC_PLLM_DIV_16 (RCC_PLLCFGR_PLLM_3 | RCC_PLLCFGR_PLLM_2 | RCC_PLLCFGR_PLLM_1 | RCC_PLLCFGR_PLLM_0) /*!< Main PLL division factor for PLLM input by 16 */
+#endif /* RCC_PLLM_DIV_1_16_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLR_DIV PLL division factor (PLLR)
+ * @{
+ */
+#define LL_RCC_PLLR_DIV_2 0x00000000U /*!< Main PLL division factor for PLLCLK (system clock) by 2 */
+#define LL_RCC_PLLR_DIV_4 (RCC_PLLCFGR_PLLR_0) /*!< Main PLL division factor for PLLCLK (system clock) by 4 */
+#define LL_RCC_PLLR_DIV_6 (RCC_PLLCFGR_PLLR_1) /*!< Main PLL division factor for PLLCLK (system clock) by 6 */
+#define LL_RCC_PLLR_DIV_8 (RCC_PLLCFGR_PLLR) /*!< Main PLL division factor for PLLCLK (system clock) by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLP_DIV PLL division factor (PLLP)
+ * @{
+ */
+#if defined(RCC_PLLP_DIV_2_31_SUPPORT)
+#define LL_RCC_PLLP_DIV_2 (RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 2 */
+#define LL_RCC_PLLP_DIV_3 (RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 3 */
+#define LL_RCC_PLLP_DIV_4 (RCC_PLLCFGR_PLLPDIV_2) /*!< Main PLL division factor for PLLP output by 4 */
+#define LL_RCC_PLLP_DIV_5 (RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 5 */
+#define LL_RCC_PLLP_DIV_6 (RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 6 */
+#define LL_RCC_PLLP_DIV_7 (RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 7 */
+#define LL_RCC_PLLP_DIV_8 (RCC_PLLCFGR_PLLPDIV_3) /*!< Main PLL division factor for PLLP output by 8 */
+#define LL_RCC_PLLP_DIV_9 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 9 */
+#define LL_RCC_PLLP_DIV_10 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 10 */
+#define LL_RCC_PLLP_DIV_11 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 11 */
+#define LL_RCC_PLLP_DIV_12 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2) /*!< Main PLL division factor for PLLP output by 12 */
+#define LL_RCC_PLLP_DIV_13 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 13 */
+#define LL_RCC_PLLP_DIV_14 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 14 */
+#define LL_RCC_PLLP_DIV_15 (RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 15 */
+#define LL_RCC_PLLP_DIV_16 (RCC_PLLCFGR_PLLPDIV_4) /*!< Main PLL division factor for PLLP output by 16 */
+#define LL_RCC_PLLP_DIV_17 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 17 */
+#define LL_RCC_PLLP_DIV_18 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 18 */
+#define LL_RCC_PLLP_DIV_19 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 19 */
+#define LL_RCC_PLLP_DIV_20 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_2) /*!< Main PLL division factor for PLLP output by 20 */
+#define LL_RCC_PLLP_DIV_21 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 21 */
+#define LL_RCC_PLLP_DIV_22 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 22 */
+#define LL_RCC_PLLP_DIV_23 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 23 */
+#define LL_RCC_PLLP_DIV_24 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3) /*!< Main PLL division factor for PLLP output by 24 */
+#define LL_RCC_PLLP_DIV_25 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 25 */
+#define LL_RCC_PLLP_DIV_26 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 26 */
+#define LL_RCC_PLLP_DIV_27 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 27 */
+#define LL_RCC_PLLP_DIV_28 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2) /*!< Main PLL division factor for PLLP output by 28 */
+#define LL_RCC_PLLP_DIV_29 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 29 */
+#define LL_RCC_PLLP_DIV_30 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1) /*!< Main PLL division factor for PLLP output by 30 */
+#define LL_RCC_PLLP_DIV_31 (RCC_PLLCFGR_PLLPDIV_4|RCC_PLLCFGR_PLLPDIV_3|RCC_PLLCFGR_PLLPDIV_2|RCC_PLLCFGR_PLLPDIV_1|RCC_PLLCFGR_PLLPDIV_0) /*!< Main PLL division factor for PLLP output by 31 */
+#else
+#define LL_RCC_PLLP_DIV_7 0x00000000U /*!< Main PLL division factor for PLLP output by 7 */
+#define LL_RCC_PLLP_DIV_17 (RCC_PLLCFGR_PLLP) /*!< Main PLL division factor for PLLP output by 17 */
+#endif /* RCC_PLLP_DIV_2_31_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLQ_DIV PLL division factor (PLLQ)
+ * @{
+ */
+#define LL_RCC_PLLQ_DIV_2 0x00000000U /*!< Main PLL division factor for PLLQ output by 2 */
+#define LL_RCC_PLLQ_DIV_4 (RCC_PLLCFGR_PLLQ_0) /*!< Main PLL division factor for PLLQ output by 4 */
+#define LL_RCC_PLLQ_DIV_6 (RCC_PLLCFGR_PLLQ_1) /*!< Main PLL division factor for PLLQ output by 6 */
+#define LL_RCC_PLLQ_DIV_8 (RCC_PLLCFGR_PLLQ) /*!< Main PLL division factor for PLLQ output by 8 */
+/**
+ * @}
+ */
+
+#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
+/** @defgroup RCC_LL_EC_PLLSAI1M PLLSAI1 division factor (PLLSAI1M)
+ * @{
+ */
+#define LL_RCC_PLLSAI1M_DIV_1 0x00000000U /*!< PLLSAI1 division factor for PLLSAI1M input by 1 */
+#define LL_RCC_PLLSAI1M_DIV_2 (RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 2 */
+#define LL_RCC_PLLSAI1M_DIV_3 (RCC_PLLSAI1CFGR_PLLSAI1M_1) /*!< PLLSAI1 division factor for PLLSAI1M input by 3 */
+#define LL_RCC_PLLSAI1M_DIV_4 (RCC_PLLSAI1CFGR_PLLSAI1M_1|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 4 */
+#define LL_RCC_PLLSAI1M_DIV_5 (RCC_PLLSAI1CFGR_PLLSAI1M_2) /*!< PLLSAI1 division factor for PLLSAI1M input by 5 */
+#define LL_RCC_PLLSAI1M_DIV_6 (RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 6 */
+#define LL_RCC_PLLSAI1M_DIV_7 (RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_1) /*!< PLLSAI1 division factor for PLLSAI1M input by 7 */
+#define LL_RCC_PLLSAI1M_DIV_8 (RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_1|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 8 */
+#define LL_RCC_PLLSAI1M_DIV_9 (RCC_PLLSAI1CFGR_PLLSAI1M_3) /*!< PLLSAI1 division factor for PLLSAI1M input by 9 */
+#define LL_RCC_PLLSAI1M_DIV_10 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 10 */
+#define LL_RCC_PLLSAI1M_DIV_11 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_1) /*!< PLLSAI1 division factor for PLLSAI1M input by 11 */
+#define LL_RCC_PLLSAI1M_DIV_12 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_1|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 12 */
+#define LL_RCC_PLLSAI1M_DIV_13 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_2) /*!< PLLSAI1 division factor for PLLSAI1M input by 13 */
+#define LL_RCC_PLLSAI1M_DIV_14 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 14 */
+#define LL_RCC_PLLSAI1M_DIV_15 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_1) /*!< PLLSAI1 division factor for PLLSAI1M input by 15 */
+#define LL_RCC_PLLSAI1M_DIV_16 (RCC_PLLSAI1CFGR_PLLSAI1M_3|RCC_PLLSAI1CFGR_PLLSAI1M_2|RCC_PLLSAI1CFGR_PLLSAI1M_1|RCC_PLLSAI1CFGR_PLLSAI1M_0) /*!< PLLSAI1 division factor for PLLSAI1M input by 16 */
+/**
+ * @}
+ */
+#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
+
+/** @defgroup RCC_LL_EC_PLLSAI1Q PLLSAI1 division factor (PLLSAI1Q)
+ * @{
+ */
+#define LL_RCC_PLLSAI1Q_DIV_2 0x00000000U /*!< PLLSAI1 division factor for PLLSAI1Q output by 2 */
+#define LL_RCC_PLLSAI1Q_DIV_4 (RCC_PLLSAI1CFGR_PLLSAI1Q_0) /*!< PLLSAI1 division factor for PLLSAI1Q output by 4 */
+#define LL_RCC_PLLSAI1Q_DIV_6 (RCC_PLLSAI1CFGR_PLLSAI1Q_1) /*!< PLLSAI1 division factor for PLLSAI1Q output by 6 */
+#define LL_RCC_PLLSAI1Q_DIV_8 (RCC_PLLSAI1CFGR_PLLSAI1Q) /*!< PLLSAI1 division factor for PLLSAI1Q output by 8 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLSAI1P PLLSAI1 division factor (PLLSAI1P)
+ * @{
+ */
+#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
+#define LL_RCC_PLLSAI1P_DIV_2 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 2 */
+#define LL_RCC_PLLSAI1P_DIV_3 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 3 */
+#define LL_RCC_PLLSAI1P_DIV_4 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_2) /*!< PLLSAI1 division factor for PLLSAI1P output by 4 */
+#define LL_RCC_PLLSAI1P_DIV_5 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 5 */
+#define LL_RCC_PLLSAI1P_DIV_6 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 6 */
+#define LL_RCC_PLLSAI1P_DIV_7 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 7 */
+#define LL_RCC_PLLSAI1P_DIV_8 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3) /*!< PLLSAI1 division factor for PLLSAI1P output by 8 */
+#define LL_RCC_PLLSAI1P_DIV_9 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 9 */
+#define LL_RCC_PLLSAI1P_DIV_10 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 10 */
+#define LL_RCC_PLLSAI1P_DIV_11 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 1 */
+#define LL_RCC_PLLSAI1P_DIV_12 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2) /*!< PLLSAI1 division factor for PLLSAI1P output by 12 */
+#define LL_RCC_PLLSAI1P_DIV_13 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 13 */
+#define LL_RCC_PLLSAI1P_DIV_14 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 14 */
+#define LL_RCC_PLLSAI1P_DIV_15 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 15 */
+#define LL_RCC_PLLSAI1P_DIV_16 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4) /*!< PLLSAI1 division factor for PLLSAI1P output by 16 */
+#define LL_RCC_PLLSAI1P_DIV_17 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 17 */
+#define LL_RCC_PLLSAI1P_DIV_18 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 18 */
+#define LL_RCC_PLLSAI1P_DIV_19 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 19 */
+#define LL_RCC_PLLSAI1P_DIV_20 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2) /*!< PLLSAI1 division factor for PLLSAI1P output by 20 */
+#define LL_RCC_PLLSAI1P_DIV_21 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division fctor for PLLSAI1P output by 21 */
+#define LL_RCC_PLLSAI1P_DIV_22 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 22 */
+#define LL_RCC_PLLSAI1P_DIV_23 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 23 */
+#define LL_RCC_PLLSAI1P_DIV_24 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3) /*!< PLLSAI1 division factor for PLLSAI1P output by 24 */
+#define LL_RCC_PLLSAI1P_DIV_25 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 25 */
+#define LL_RCC_PLLSAI1P_DIV_26 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 26 */
+#define LL_RCC_PLLSAI1P_DIV_27 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 27 */
+#define LL_RCC_PLLSAI1P_DIV_28 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2) /*!< PLLSAI1 division factor for PLLSAI1P output by 28 */
+#define LL_RCC_PLLSAI1P_DIV_29 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 29 */
+#define LL_RCC_PLLSAI1P_DIV_30 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1) /*!< PLLSAI1 division factor for PLLSAI1P output by 30 */
+#define LL_RCC_PLLSAI1P_DIV_31 (RCC_PLLSAI1CFGR_PLLSAI1PDIV_4|RCC_PLLSAI1CFGR_PLLSAI1PDIV_3|RCC_PLLSAI1CFGR_PLLSAI1PDIV_2|RCC_PLLSAI1CFGR_PLLSAI1PDIV_1|RCC_PLLSAI1CFGR_PLLSAI1PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 31 */
+#else
+#define LL_RCC_PLLSAI1P_DIV_7 0x00000000U /*!< PLLSAI1 division factor for PLLSAI1P output by 7 */
+#define LL_RCC_PLLSAI1P_DIV_17 (RCC_PLLSAI1CFGR_PLLSAI1P) /*!< PLLSAI1 division factor for PLLSAI1P output by 17 */
+#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLSAI1R PLLSAI1 division factor (PLLSAI1R)
+ * @{
+ */
+#define LL_RCC_PLLSAI1R_DIV_2 0x00000000U /*!< PLLSAI1 division factor for PLLSAI1R output by 2 */
+#define LL_RCC_PLLSAI1R_DIV_4 (RCC_PLLSAI1CFGR_PLLSAI1R_0) /*!< PLLSAI1 division factor for PLLSAI1R output by 4 */
+#define LL_RCC_PLLSAI1R_DIV_6 (RCC_PLLSAI1CFGR_PLLSAI1R_1) /*!< PLLSAI1 division factor for PLLSAI1R output by 6 */
+#define LL_RCC_PLLSAI1R_DIV_8 (RCC_PLLSAI1CFGR_PLLSAI1R) /*!< PLLSAI1 division factor for PLLSAI1R output by 8 */
+/**
+ * @}
+ */
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT)
+/** @defgroup RCC_LL_EC_PLLSAI2M PLLSAI1 division factor (PLLSAI2M)
+ * @{
+ */
+#define LL_RCC_PLLSAI2M_DIV_1 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2M input by 1 */
+#define LL_RCC_PLLSAI2M_DIV_2 (RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 2 */
+#define LL_RCC_PLLSAI2M_DIV_3 (RCC_PLLSAI2CFGR_PLLSAI2M_1) /*!< PLLSAI2 division factor for PLLSAI2M input by 3 */
+#define LL_RCC_PLLSAI2M_DIV_4 (RCC_PLLSAI2CFGR_PLLSAI2M_1|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 4 */
+#define LL_RCC_PLLSAI2M_DIV_5 (RCC_PLLSAI2CFGR_PLLSAI2M_2) /*!< PLLSAI2 division factor for PLLSAI2M input by 5 */
+#define LL_RCC_PLLSAI2M_DIV_6 (RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 6 */
+#define LL_RCC_PLLSAI2M_DIV_7 (RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_1) /*!< PLLSAI2 division factor for PLLSAI2M input by 7 */
+#define LL_RCC_PLLSAI2M_DIV_8 (RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_1|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 8 */
+#define LL_RCC_PLLSAI2M_DIV_9 (RCC_PLLSAI2CFGR_PLLSAI2M_3) /*!< PLLSAI2 division factor for PLLSAI2M input by 9 */
+#define LL_RCC_PLLSAI2M_DIV_10 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 10 */
+#define LL_RCC_PLLSAI2M_DIV_11 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_1) /*!< PLLSAI2 division factor for PLLSAI2M input by 11 */
+#define LL_RCC_PLLSAI2M_DIV_12 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_1|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 12 */
+#define LL_RCC_PLLSAI2M_DIV_13 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_2) /*!< PLLSAI2 division factor for PLLSAI2M input by 13 */
+#define LL_RCC_PLLSAI2M_DIV_14 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 14 */
+#define LL_RCC_PLLSAI2M_DIV_15 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_1) /*!< PLLSAI2 division factor for PLLSAI2M input by 15 */
+#define LL_RCC_PLLSAI2M_DIV_16 (RCC_PLLSAI2CFGR_PLLSAI2M_3|RCC_PLLSAI2CFGR_PLLSAI2M_2|RCC_PLLSAI2CFGR_PLLSAI2M_1|RCC_PLLSAI2CFGR_PLLSAI2M_0) /*!< PLLSAI2 division factor for PLLSAI2M input by 16 */
+/**
+ * @}
+ */
+#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */
+
+#if defined(RCC_PLLSAI2Q_DIV_SUPPORT)
+/** @defgroup RCC_LL_EC_PLLSAI2Q PLLSAI2 division factor (PLLSAI2Q)
+ * @{
+ */
+#define LL_RCC_PLLSAI2Q_DIV_2 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2Q output by 2 */
+#define LL_RCC_PLLSAI2Q_DIV_4 (RCC_PLLSAI2CFGR_PLLSAI2Q_0) /*!< PLLSAI2 division factor for PLLSAI2Q output by 4 */
+#define LL_RCC_PLLSAI2Q_DIV_6 (RCC_PLLSAI2CFGR_PLLSAI2Q_1) /*!< PLLSAI2 division factor for PLLSAI2Q output by 6 */
+#define LL_RCC_PLLSAI2Q_DIV_8 (RCC_PLLSAI2CFGR_PLLSAI2Q) /*!< PLLSAI2 division factor for PLLSAI2Q output by 8 */
+/**
+ * @}
+ */
+#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */
+
+/** @defgroup RCC_LL_EC_PLLSAI2P PLLSAI2 division factor (PLLSAI2P)
+ * @{
+ */
+#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
+#define LL_RCC_PLLSAI2P_DIV_2 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 2 */
+#define LL_RCC_PLLSAI2P_DIV_3 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 3 */
+#define LL_RCC_PLLSAI2P_DIV_4 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_2) /*!< PLLSAI2 division factor for PLLSAI2P output by 4 */
+#define LL_RCC_PLLSAI2P_DIV_5 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 5 */
+#define LL_RCC_PLLSAI2P_DIV_6 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 6 */
+#define LL_RCC_PLLSAI2P_DIV_7 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 7 */
+#define LL_RCC_PLLSAI2P_DIV_8 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3) /*!< PLLSAI2 division factor for PLLSAI2P output by 8 */
+#define LL_RCC_PLLSAI2P_DIV_9 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 9 */
+#define LL_RCC_PLLSAI2P_DIV_10 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 10 */
+#define LL_RCC_PLLSAI2P_DIV_11 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 1 */
+#define LL_RCC_PLLSAI2P_DIV_12 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2) /*!< PLLSAI2 division factor for PLLSAI2P output by 12 */
+#define LL_RCC_PLLSAI2P_DIV_13 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 13 */
+#define LL_RCC_PLLSAI2P_DIV_14 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 14 */
+#define LL_RCC_PLLSAI2P_DIV_15 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 15 */
+#define LL_RCC_PLLSAI2P_DIV_16 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4) /*!< PLLSAI2 division factor for PLLSAI2P output by 16 */
+#define LL_RCC_PLLSAI2P_DIV_17 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 17 */
+#define LL_RCC_PLLSAI2P_DIV_18 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 18 */
+#define LL_RCC_PLLSAI2P_DIV_19 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 19 */
+#define LL_RCC_PLLSAI2P_DIV_20 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2) /*!< PLLSAI2 division factor for PLLSAI2P output by 20 */
+#define LL_RCC_PLLSAI2P_DIV_21 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division fctor for PLLSAI2P output by 21 */
+#define LL_RCC_PLLSAI2P_DIV_22 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 22 */
+#define LL_RCC_PLLSAI2P_DIV_23 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 23 */
+#define LL_RCC_PLLSAI2P_DIV_24 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3) /*!< PLLSAI2 division factor for PLLSAI2P output by 24 */
+#define LL_RCC_PLLSAI2P_DIV_25 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 25 */
+#define LL_RCC_PLLSAI2P_DIV_26 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 26 */
+#define LL_RCC_PLLSAI2P_DIV_27 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 27 */
+#define LL_RCC_PLLSAI2P_DIV_28 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2) /*!< PLLSAI2 division factor for PLLSAI2P output by 28 */
+#define LL_RCC_PLLSAI2P_DIV_29 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI2 division factor for PLLSAI2P output by 29 */
+#define LL_RCC_PLLSAI2P_DIV_30 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1) /*!< PLLSAI2 division factor for PLLSAI2P output by 30 */
+#define LL_RCC_PLLSAI2P_DIV_31 (RCC_PLLSAI2CFGR_PLLSAI2PDIV_4|RCC_PLLSAI2CFGR_PLLSAI2PDIV_3|RCC_PLLSAI2CFGR_PLLSAI2PDIV_2|RCC_PLLSAI2CFGR_PLLSAI2PDIV_1|RCC_PLLSAI2CFGR_PLLSAI2PDIV_0) /*!< PLLSAI1 division factor for PLLSAI1P output by 31 */
+#else
+#define LL_RCC_PLLSAI2P_DIV_7 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2P output by 7 */
+#define LL_RCC_PLLSAI2P_DIV_17 (RCC_PLLSAI2CFGR_PLLSAI2P) /*!< PLLSAI2 division factor for PLLSAI2P output by 17 */
+#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EC_PLLSAI2R PLLSAI2 division factor (PLLSAI2R)
+ * @{
+ */
+#define LL_RCC_PLLSAI2R_DIV_2 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2R output by 2 */
+#define LL_RCC_PLLSAI2R_DIV_4 (RCC_PLLSAI2CFGR_PLLSAI2R_0) /*!< PLLSAI2 division factor for PLLSAI2R output by 4 */
+#define LL_RCC_PLLSAI2R_DIV_6 (RCC_PLLSAI2CFGR_PLLSAI2R_1) /*!< PLLSAI2 division factor for PLLSAI2R output by 6 */
+#define LL_RCC_PLLSAI2R_DIV_8 (RCC_PLLSAI2CFGR_PLLSAI2R) /*!< PLLSAI2 division factor for PLLSAI2R output by 8 */
+/**
+ * @}
+ */
+
+#if defined(RCC_CCIPR2_PLLSAI2DIVR)
+/** @defgroup RCC_LL_EC_PLLSAI2DIVR PLLSAI2DIVR division factor (PLLSAI2DIVR)
+ * @{
+ */
+#define LL_RCC_PLLSAI2DIVR_DIV_2 0x00000000U /*!< PLLSAI2 division factor for PLLSAI2DIVR output by 2 */
+#define LL_RCC_PLLSAI2DIVR_DIV_4 RCC_CCIPR2_PLLSAI2DIVR_0 /*!< PLLSAI2 division factor for PLLSAI2DIVR output by 4 */
+#define LL_RCC_PLLSAI2DIVR_DIV_8 RCC_CCIPR2_PLLSAI2DIVR_1 /*!< PLLSAI2 division factor for PLLSAI2DIVR output by 8 */
+#define LL_RCC_PLLSAI2DIVR_DIV_16 (RCC_CCIPR2_PLLSAI2DIVR_1 | RCC_CCIPR2_PLLSAI2DIVR_0) /*!< PLLSAI2 division factor for PLLSAI2DIVR output by 16 */
+/**
+ * @}
+ */
+#endif /* RCC_CCIPR2_PLLSAI2DIVR */
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+/** @defgroup RCC_LL_EC_MSIRANGESEL MSI clock range selection
+ * @{
+ */
+#define LL_RCC_MSIRANGESEL_STANDBY 0U /*!< MSI Range is provided by MSISRANGE */
+#define LL_RCC_MSIRANGESEL_RUN 1U /*!< MSI Range is provided by MSIRANGE */
+/**
+ * @}
+ */
+
+/** Legacy definitions for compatibility purpose
+@cond 0
+*/
+#if defined(DFSDM1_Channel0)
+#define LL_RCC_DFSDM1_CLKSOURCE_PCLK LL_RCC_DFSDM1_CLKSOURCE_PCLK2
+#define LL_RCC_DFSDM_CLKSOURCE_PCLK LL_RCC_DFSDM1_CLKSOURCE_PCLK2
+#define LL_RCC_DFSDM_CLKSOURCE_SYSCLK LL_RCC_DFSDM1_CLKSOURCE_SYSCLK
+#define LL_RCC_DFSDM_CLKSOURCE LL_RCC_DFSDM1_CLKSOURCE
+#endif /* DFSDM1_Channel0 */
+#if defined(SWPMI1)
+#define LL_RCC_SWPMI1_CLKSOURCE_PCLK LL_RCC_SWPMI1_CLKSOURCE_PCLK1
+#endif /* SWPMI1 */
+/**
+@endcond
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup RCC_LL_Exported_Macros RCC Exported Macros
+ * @{
+ */
+
+/** @defgroup RCC_LL_EM_WRITE_READ Common Write and read registers Macros
+ * @{
+ */
+
+/**
+ * @brief Write a value in RCC register
+ * @param __REG__ Register to be written
+ * @param __VALUE__ Value to be written in the register
+ * @retval None
+ */
+#define LL_RCC_WriteReg(__REG__, __VALUE__) WRITE_REG(RCC->__REG__, (__VALUE__))
+
+/**
+ * @brief Read a value in RCC register
+ * @param __REG__ Register to be read
+ * @retval Register value
+ */
+#define LL_RCC_ReadReg(__REG__) READ_REG(RCC->__REG__)
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EM_CALC_FREQ Calculate frequencies
+ * @{
+ */
+
+/**
+ * @brief Helper macro to calculate the PLLCLK frequency on system domain
+ * @note ex: @ref __LL_RCC_CALC_PLLCLK_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetR ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_10 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_11 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_12 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_13 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_14 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_15 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_16 (*)
+ *
+ * (*) value not defined in all devices.
+ * @param __PLLN__ Between 8 and 86
+ * @param __PLLR__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLR_DIV_2
+ * @arg @ref LL_RCC_PLLR_DIV_4
+ * @arg @ref LL_RCC_PLLR_DIV_6
+ * @arg @ref LL_RCC_PLLR_DIV_8
+ * @retval PLL clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLCLK_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLR__) ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLN__) / \
+ ((((__PLLR__) >> RCC_PLLCFGR_PLLR_Pos) + 1U) * 2U))
+
+#if defined(RCC_PLLP_DIV_2_31_SUPPORT)
+/**
+ * @brief Helper macro to calculate the PLLCLK frequency used on SAI domain
+ * @note ex: @ref __LL_RCC_CALC_PLLCLK_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_10 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_11 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_12 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_13 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_14 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_15 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_16 (*)
+ *
+ * (*) value not defined in all devices.
+ * @param __PLLN__ Between 8 and 86
+ * @param __PLLP__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLP_DIV_2
+ * @arg @ref LL_RCC_PLLP_DIV_3
+ * @arg @ref LL_RCC_PLLP_DIV_4
+ * @arg @ref LL_RCC_PLLP_DIV_5
+ * @arg @ref LL_RCC_PLLP_DIV_6
+ * @arg @ref LL_RCC_PLLP_DIV_7
+ * @arg @ref LL_RCC_PLLP_DIV_8
+ * @arg @ref LL_RCC_PLLP_DIV_9
+ * @arg @ref LL_RCC_PLLP_DIV_10
+ * @arg @ref LL_RCC_PLLP_DIV_11
+ * @arg @ref LL_RCC_PLLP_DIV_12
+ * @arg @ref LL_RCC_PLLP_DIV_13
+ * @arg @ref LL_RCC_PLLP_DIV_14
+ * @arg @ref LL_RCC_PLLP_DIV_15
+ * @arg @ref LL_RCC_PLLP_DIV_16
+ * @arg @ref LL_RCC_PLLP_DIV_17
+ * @arg @ref LL_RCC_PLLP_DIV_18
+ * @arg @ref LL_RCC_PLLP_DIV_19
+ * @arg @ref LL_RCC_PLLP_DIV_20
+ * @arg @ref LL_RCC_PLLP_DIV_21
+ * @arg @ref LL_RCC_PLLP_DIV_22
+ * @arg @ref LL_RCC_PLLP_DIV_23
+ * @arg @ref LL_RCC_PLLP_DIV_24
+ * @arg @ref LL_RCC_PLLP_DIV_25
+ * @arg @ref LL_RCC_PLLP_DIV_26
+ * @arg @ref LL_RCC_PLLP_DIV_27
+ * @arg @ref LL_RCC_PLLP_DIV_28
+ * @arg @ref LL_RCC_PLLP_DIV_29
+ * @arg @ref LL_RCC_PLLP_DIV_30
+ * @arg @ref LL_RCC_PLLP_DIV_31
+ * @retval PLL clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLN__) / \
+ ((__PLLP__) >> RCC_PLLCFGR_PLLPDIV_Pos))
+
+#else
+/**
+ * @brief Helper macro to calculate the PLLCLK frequency used on SAI domain
+ * @note ex: @ref __LL_RCC_CALC_PLLCLK_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetP ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param __PLLN__ Between 8 and 86
+ * @param __PLLP__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLP_DIV_7
+ * @arg @ref LL_RCC_PLLP_DIV_17
+ * @retval PLL clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLCLK_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLP__) ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLN__) / \
+ (((__PLLP__) == LL_RCC_PLLP_DIV_7) ? 7U : 17U))
+
+#endif /* RCC_PLLP_DIV_2_31_SUPPORT */
+
+/**
+ * @brief Helper macro to calculate the PLLCLK frequency used on 48M domain
+ * @note ex: @ref __LL_RCC_CALC_PLLCLK_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLL_GetN (), @ref LL_RCC_PLL_GetQ ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_10 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_11 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_12 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_13 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_14 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_15 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_16 (*)
+ *
+ * (*) value not defined in all devices.
+ * @param __PLLN__ Between 8 and 86
+ * @param __PLLQ__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLQ_DIV_2
+ * @arg @ref LL_RCC_PLLQ_DIV_4
+ * @arg @ref LL_RCC_PLLQ_DIV_6
+ * @arg @ref LL_RCC_PLLQ_DIV_8
+ * @retval PLL clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLCLK_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLN__, __PLLQ__) ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLN__) / \
+ ((((__PLLQ__) >> RCC_PLLCFGR_PLLQ_Pos) + 1U) << 1U))
+
+#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
+/**
+ * @brief Helper macro to calculate the PLLSAI1 frequency used for SAI domain
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI1_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI1_GetDivider (),
+ * @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetP ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLSAI1M__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_1
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_3
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_5
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_8
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_9
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_10
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_11
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_12
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_13
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_14
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_15
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_16
+ * @param __PLLSAI1N__ Between 8 and 86
+ * @param __PLLSAI1P__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_3
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_5
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_8
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_9
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_10
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_11
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_12
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_13
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_14
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_15
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_16
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_17
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_18
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_19
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_20
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_21
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_22
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_23
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_24
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_25
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_26
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_27
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_28
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_29
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_30
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_31
+ * @retval PLLSAI1 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI1_SAI_FREQ(__INPUTFREQ__, __PLLSAI1M__, __PLLSAI1N__, __PLLSAI1P__) \
+ ((__INPUTFREQ__) / ((((__PLLSAI1M__) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)) * (__PLLSAI1N__) / \
+ ((__PLLSAI1P__) >> RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos))
+
+#elif defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
+/**
+ * @brief Helper macro to calculate the PLLSAI1 frequency used for SAI domain
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI1_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetP ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param __PLLSAI1N__ Between 8 and 86
+ * @param __PLLSAI1P__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_3
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_5
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_8
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_9
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_10
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_11
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_12
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_13
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_14
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_15
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_16
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_17
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_18
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_19
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_20
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_21
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_22
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_23
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_24
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_25
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_26
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_27
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_28
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_29
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_30
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_31
+ * @retval PLLSAI1 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI1_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI1N__, __PLLSAI1P__) \
+ ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI1N__) / \
+ ((__PLLSAI1P__) >> RCC_PLLSAI1CFGR_PLLSAI1PDIV_Pos))
+
+#else
+/**
+ * @brief Helper macro to calculate the PLLSAI1 frequency used for SAI domain
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI1_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetP ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param __PLLSAI1N__ Between 8 and 86
+ * @param __PLLSAI1P__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_17
+ * @retval PLLSAI1 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI1_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI1N__, __PLLSAI1P__) \
+ ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI1N__) / \
+ (((__PLLSAI1P__) == LL_RCC_PLLSAI1P_DIV_7) ? 7U : 17U))
+
+#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */
+
+#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
+/**
+ * @brief Helper macro to calculate the PLLSAI1 frequency used on 48M domain
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI1_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI1_GetDivider (),
+ * @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetQ ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLSAI1M__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_1
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_3
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_5
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_8
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_9
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_10
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_11
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_12
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_13
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_14
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_15
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_16
+ * @param __PLLSAI1N__ Between 8 and 86
+ * @param __PLLSAI1Q__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_8
+ * @retval PLLSAI1 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI1_48M_FREQ(__INPUTFREQ__, __PLLSAI1M__, __PLLSAI1N__, __PLLSAI1Q__) \
+ ((__INPUTFREQ__) / ((((__PLLSAI1M__) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)) * (__PLLSAI1N__) / \
+ ((((__PLLSAI1Q__) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) << 1U))
+
+#else
+/**
+ * @brief Helper macro to calculate the PLLSAI1 frequency used on 48M domain
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI1_48M_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetQ ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param __PLLSAI1N__ Between 8 and 86
+ * @param __PLLSAI1Q__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_8
+ * @retval PLLSAI1 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI1_48M_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI1N__, __PLLSAI1Q__) \
+ ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI1N__) / \
+ ((((__PLLSAI1Q__) >> RCC_PLLSAI1CFGR_PLLSAI1Q_Pos) + 1U) << 1U))
+
+#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
+
+#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
+/**
+ * @brief Helper macro to calculate the PLLSAI1 frequency used on ADC domain
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI1_ADC_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI1_GetDivider (),
+ * @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetR ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLSAI1M__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_1
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_3
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_5
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_8
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_9
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_10
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_11
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_12
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_13
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_14
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_15
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_16
+ * @param __PLLSAI1N__ Between 8 and 86
+ * @param __PLLSAI1R__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_8
+ * @retval PLLSAI1 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI1_ADC_FREQ(__INPUTFREQ__, __PLLSAI1M__, __PLLSAI1N__, __PLLSAI1R__) \
+ ((__INPUTFREQ__) / ((((__PLLSAI1M__) >> RCC_PLLSAI1CFGR_PLLSAI1M_Pos) + 1U)) * (__PLLSAI1N__) / \
+ ((((__PLLSAI1R__) >> RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + 1U) << 1U))
+
+#else
+/**
+ * @brief Helper macro to calculate the PLLSAI1 frequency used on ADC domain
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI1_ADC_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLLSAI1_GetN (), @ref LL_RCC_PLLSAI1_GetR ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param __PLLSAI1N__ Between 8 and 86
+ * @param __PLLSAI1R__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_8
+ * @retval PLLSAI1 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI1_ADC_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI1N__, __PLLSAI1R__) \
+ ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI1N__) / \
+ ((((__PLLSAI1R__) >> RCC_PLLSAI1CFGR_PLLSAI1R_Pos) + 1U) << 1U))
+
+#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
+
+#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
+/**
+ * @brief Helper macro to calculate the PLLSAI2 frequency used for SAI domain
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI2_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI2_GetDivider (),
+ * @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetP ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLSAI2M__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_1
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_3
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_5
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_9
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_10
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_11
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_12
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_13
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_14
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_15
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_16
+ * @param __PLLSAI2N__ Between 8 and 86
+ * @param __PLLSAI2P__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_3
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_5
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_9
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_10
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_11
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_12
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_13
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_14
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_15
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_16
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_17
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_18
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_19
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_20
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_21
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_22
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_23
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_24
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_25
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_26
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_27
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_28
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_29
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_30
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_31
+ * @retval PLLSAI2 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI2_SAI_FREQ(__INPUTFREQ__, __PLLSAI2M__, __PLLSAI2N__, __PLLSAI2P__) \
+ ((__INPUTFREQ__) / ((((__PLLSAI2M__) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)) * (__PLLSAI2N__) / \
+ ((__PLLSAI2P__) >> RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))
+
+#elif defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
+/**
+ * @brief Helper macro to calculate the PLLSAI2 frequency used for SAI domain
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI2_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetP ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param __PLLSAI2N__ Between 8 and 86
+ * @param __PLLSAI2P__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_3
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_5
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_9
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_10
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_11
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_12
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_13
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_14
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_15
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_16
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_17
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_18
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_19
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_20
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_21
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_22
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_23
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_24
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_25
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_26
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_27
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_28
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_29
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_30
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_31
+ * @retval PLLSAI2 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI2_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI2N__, __PLLSAI2P__) \
+ ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI2N__) / \
+ ((__PLLSAI2P__) >> RCC_PLLSAI2CFGR_PLLSAI2PDIV_Pos))
+
+#else
+/**
+ * @brief Helper macro to calculate the PLLSAI2 frequency used for SAI domain
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI2_SAI_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetP ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param __PLLSAI2N__ Between 8 and 86
+ * @param __PLLSAI2P__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_17
+ * @retval PLLSAI2 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI2_SAI_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI2N__, __PLLSAI2P__) \
+ ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1)) * (__PLLSAI2N__) / \
+ (((__PLLSAI2P__) == LL_RCC_PLLSAI2P_DIV_7) ? 7U : 17U))
+
+#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */
+
+#if defined(LTDC)
+/**
+ * @brief Helper macro to calculate the PLLSAI2 frequency used for LTDC domain
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI2_LTDC_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI2_GetDivider (),
+ * @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetR (), @ref LL_RCC_PLLSAI2_GetDIVR ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI/MSI)
+ * @param __PLLSAI2M__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_1
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_3
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_5
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_9
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_10
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_11
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_12
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_13
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_14
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_15
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_16
+ * @param __PLLSAI2N__ Between 8 and 86
+ * @param __PLLSAI2R__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_8
+ * @param __PLLSAI2DIVR__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_16
+ * @retval PLLSAI2 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI2_LTDC_FREQ(__INPUTFREQ__, __PLLSAI2M__, __PLLSAI2N__, __PLLSAI2R__, __PLLSAI2DIVR__) \
+ (((__INPUTFREQ__) / (((__PLLSAI2M__)>> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)) * (__PLLSAI2N__) / \
+ (((((__PLLSAI2R__) >> RCC_PLLSAI2CFGR_PLLSAI2R_Pos ) + 1U) << 1U) * (aRCC_PLLSAI2DIVRPrescTable[(__PLLSAI2DIVR__) >> RCC_CCIPR2_PLLSAI2DIVR_Pos])))
+#else
+/**
+ * @brief Helper macro to calculate the PLLSAI2 frequency used on ADC domain
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI2_ADC_FREQ (HSE_VALUE,@ref LL_RCC_PLL_GetDivider (),
+ * @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetR ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on MSI/HSE/HSI)
+ * @param __PLLM__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param __PLLSAI2N__ Between 8 and 86
+ * @param __PLLSAI2R__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_8
+ * @retval PLLSAI2 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI2_ADC_FREQ(__INPUTFREQ__, __PLLM__, __PLLSAI2N__, __PLLSAI2R__) \
+ ((__INPUTFREQ__) / ((((__PLLM__)>> RCC_PLLCFGR_PLLM_Pos) + 1U)) * (__PLLSAI2N__) / \
+ ((((__PLLSAI2R__) >> RCC_PLLSAI2CFGR_PLLSAI2R_Pos ) + 1U) << 1U))
+
+#endif /* LTDC */
+
+#if defined(DSI)
+/**
+ * @brief Helper macro to calculate the PLLDSICLK frequency used on DSI
+ * @note ex: @ref __LL_RCC_CALC_PLLSAI2_DSI_FREQ (HSE_VALUE,@ref LL_RCC_PLLSAI2_GetDivider (),
+ * @ref LL_RCC_PLLSAI2_GetN (), @ref LL_RCC_PLLSAI2_GetQ ());
+ * @param __INPUTFREQ__ PLL Input frequency (based on HSE/HSI/MSI)
+ * @param __PLLSAI2M__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_1
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_3
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_5
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_9
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_10
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_11
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_12
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_13
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_14
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_15
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_16
+ * @param __PLLSAI2N__ Between 8 and 86
+ * @param __PLLSAI2Q__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2Q_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2Q_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2Q_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2Q_DIV_8
+ * @retval PLL clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PLLSAI2_DSI_FREQ(__INPUTFREQ__, __PLLSAI2M__, __PLLSAI2N__, __PLLSAI2Q__) \
+ ((__INPUTFREQ__) / ((((__PLLSAI2M__) >> RCC_PLLSAI2CFGR_PLLSAI2M_Pos) + 1U)) * (__PLLSAI2N__) / \
+ ((((__PLLSAI2Q__) >> RCC_PLLSAI2CFGR_PLLSAI2Q_Pos) + 1U) << 1U))
+#endif /* DSI */
+
+
+
+/**
+ * @brief Helper macro to calculate the HCLK frequency
+ * @param __SYSCLKFREQ__ SYSCLK frequency (based on MSI/HSE/HSI/PLLCLK)
+ * @param __AHBPRESCALER__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SYSCLK_DIV_1
+ * @arg @ref LL_RCC_SYSCLK_DIV_2
+ * @arg @ref LL_RCC_SYSCLK_DIV_4
+ * @arg @ref LL_RCC_SYSCLK_DIV_8
+ * @arg @ref LL_RCC_SYSCLK_DIV_16
+ * @arg @ref LL_RCC_SYSCLK_DIV_64
+ * @arg @ref LL_RCC_SYSCLK_DIV_128
+ * @arg @ref LL_RCC_SYSCLK_DIV_256
+ * @arg @ref LL_RCC_SYSCLK_DIV_512
+ * @retval HCLK clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_HCLK_FREQ(__SYSCLKFREQ__, __AHBPRESCALER__) ((__SYSCLKFREQ__) >> AHBPrescTable[((__AHBPRESCALER__) & RCC_CFGR_HPRE) >> RCC_CFGR_HPRE_Pos])
+
+/**
+ * @brief Helper macro to calculate the PCLK1 frequency (ABP1)
+ * @param __HCLKFREQ__ HCLK frequency
+ * @param __APB1PRESCALER__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_APB1_DIV_1
+ * @arg @ref LL_RCC_APB1_DIV_2
+ * @arg @ref LL_RCC_APB1_DIV_4
+ * @arg @ref LL_RCC_APB1_DIV_8
+ * @arg @ref LL_RCC_APB1_DIV_16
+ * @retval PCLK1 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PCLK1_FREQ(__HCLKFREQ__, __APB1PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB1PRESCALER__) >> RCC_CFGR_PPRE1_Pos])
+
+/**
+ * @brief Helper macro to calculate the PCLK2 frequency (ABP2)
+ * @param __HCLKFREQ__ HCLK frequency
+ * @param __APB2PRESCALER__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_APB2_DIV_1
+ * @arg @ref LL_RCC_APB2_DIV_2
+ * @arg @ref LL_RCC_APB2_DIV_4
+ * @arg @ref LL_RCC_APB2_DIV_8
+ * @arg @ref LL_RCC_APB2_DIV_16
+ * @retval PCLK2 clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_PCLK2_FREQ(__HCLKFREQ__, __APB2PRESCALER__) ((__HCLKFREQ__) >> APBPrescTable[(__APB2PRESCALER__) >> RCC_CFGR_PPRE2_Pos])
+
+/**
+ * @brief Helper macro to calculate the MSI frequency (in Hz)
+ * @note __MSISEL__ can be retrieved thanks to function LL_RCC_MSI_IsEnabledRangeSelect()
+ * @note if __MSISEL__ is equal to LL_RCC_MSIRANGESEL_STANDBY,
+ * __MSIRANGE__can be retrieved by LL_RCC_MSI_GetRangeAfterStandby()
+ * else by LL_RCC_MSI_GetRange()
+ * ex: __LL_RCC_CALC_MSI_FREQ(LL_RCC_MSI_IsEnabledRangeSelect(),
+ * (LL_RCC_MSI_IsEnabledRangeSelect()?
+ * LL_RCC_MSI_GetRange():
+ * LL_RCC_MSI_GetRangeAfterStandby()))
+ * @param __MSISEL__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_MSIRANGESEL_STANDBY
+ * @arg @ref LL_RCC_MSIRANGESEL_RUN
+ * @param __MSIRANGE__ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_MSIRANGE_0
+ * @arg @ref LL_RCC_MSIRANGE_1
+ * @arg @ref LL_RCC_MSIRANGE_2
+ * @arg @ref LL_RCC_MSIRANGE_3
+ * @arg @ref LL_RCC_MSIRANGE_4
+ * @arg @ref LL_RCC_MSIRANGE_5
+ * @arg @ref LL_RCC_MSIRANGE_6
+ * @arg @ref LL_RCC_MSIRANGE_7
+ * @arg @ref LL_RCC_MSIRANGE_8
+ * @arg @ref LL_RCC_MSIRANGE_9
+ * @arg @ref LL_RCC_MSIRANGE_10
+ * @arg @ref LL_RCC_MSIRANGE_11
+ * @arg @ref LL_RCC_MSISRANGE_4
+ * @arg @ref LL_RCC_MSISRANGE_5
+ * @arg @ref LL_RCC_MSISRANGE_6
+ * @arg @ref LL_RCC_MSISRANGE_7
+ * @retval MSI clock frequency (in Hz)
+ */
+#define __LL_RCC_CALC_MSI_FREQ(__MSISEL__, __MSIRANGE__) (((__MSISEL__) == LL_RCC_MSIRANGESEL_STANDBY) ? \
+ (MSIRangeTable[(__MSIRANGE__) >> 8U]) : \
+ (MSIRangeTable[(__MSIRANGE__) >> 4U]))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup RCC_LL_Exported_Functions RCC Exported Functions
+ * @{
+ */
+
+/** @defgroup RCC_LL_EF_HSE HSE
+ * @{
+ */
+
+/**
+ * @brief Enable the Clock Security System.
+ * @rmtoll CR CSSON LL_RCC_HSE_EnableCSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_EnableCSS(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_CSSON);
+}
+
+/**
+ * @brief Enable HSE external oscillator (HSE Bypass)
+ * @rmtoll CR HSEBYP LL_RCC_HSE_EnableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_EnableBypass(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_HSEBYP);
+}
+
+/**
+ * @brief Disable HSE external oscillator (HSE Bypass)
+ * @rmtoll CR HSEBYP LL_RCC_HSE_DisableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_DisableBypass(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
+}
+
+/**
+ * @brief Enable HSE crystal oscillator (HSE ON)
+ * @rmtoll CR HSEON LL_RCC_HSE_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_HSEON);
+}
+
+/**
+ * @brief Disable HSE crystal oscillator (HSE ON)
+ * @rmtoll CR HSEON LL_RCC_HSE_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSE_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_HSEON);
+}
+
+/**
+ * @brief Check if HSE oscillator Ready
+ * @rmtoll CR HSERDY LL_RCC_HSE_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSE_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_HSERDY) == (RCC_CR_HSERDY));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_HSI HSI
+ * @{
+ */
+
+/**
+ * @brief Enable HSI even in stop mode
+ * @note HSI oscillator is forced ON even in Stop mode
+ * @rmtoll CR HSIKERON LL_RCC_HSI_EnableInStopMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_EnableInStopMode(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_HSIKERON);
+}
+
+/**
+ * @brief Disable HSI in stop mode
+ * @rmtoll CR HSIKERON LL_RCC_HSI_DisableInStopMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_DisableInStopMode(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_HSIKERON);
+}
+
+/**
+ * @brief Check if HSI is enabled in stop mode
+ * @rmtoll CR HSIKERON LL_RCC_HSI_IsEnabledInStopMode
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI_IsEnabledInStopMode(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_HSIKERON) == (RCC_CR_HSIKERON));
+}
+
+/**
+ * @brief Enable HSI oscillator
+ * @rmtoll CR HSION LL_RCC_HSI_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_HSION);
+}
+
+/**
+ * @brief Disable HSI oscillator
+ * @rmtoll CR HSION LL_RCC_HSI_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_HSION);
+}
+
+/**
+ * @brief Check if HSI clock is ready
+ * @rmtoll CR HSIRDY LL_RCC_HSI_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_HSIRDY) == (RCC_CR_HSIRDY));
+}
+
+/**
+ * @brief Enable HSI Automatic from stop mode
+ * @rmtoll CR HSIASFS LL_RCC_HSI_EnableAutoFromStop
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_EnableAutoFromStop(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_HSIASFS);
+}
+
+/**
+ * @brief Disable HSI Automatic from stop mode
+ * @rmtoll CR HSIASFS LL_RCC_HSI_DisableAutoFromStop
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_DisableAutoFromStop(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_HSIASFS);
+}
+/**
+ * @brief Get HSI Calibration value
+ * @note When HSITRIM is written, HSICAL is updated with the sum of
+ * HSITRIM and the factory trim value
+ * @rmtoll ICSCR HSICAL LL_RCC_HSI_GetCalibration
+ * @retval Between Min_Data = 0x00 and Max_Data = 0xFF
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibration(void)
+{
+ return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSICAL) >> RCC_ICSCR_HSICAL_Pos);
+}
+
+/**
+ * @brief Set HSI Calibration trimming
+ * @note user-programmable trimming value that is added to the HSICAL
+ * @note Default value is 16, which, when added to the HSICAL value,
+ * should trim the HSI to 16 MHz +/- 1 %
+ * @rmtoll ICSCR HSITRIM LL_RCC_HSI_SetCalibTrimming
+ * @param Value Between Min_Data = 0 and Max_Data = 31
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI_SetCalibTrimming(uint32_t Value)
+{
+ MODIFY_REG(RCC->ICSCR, RCC_ICSCR_HSITRIM, Value << RCC_ICSCR_HSITRIM_Pos);
+}
+
+/**
+ * @brief Get HSI Calibration trimming
+ * @rmtoll ICSCR HSITRIM LL_RCC_HSI_GetCalibTrimming
+ * @retval Between Min_Data = 0 and Max_Data = 31
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI_GetCalibTrimming(void)
+{
+ return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_HSITRIM) >> RCC_ICSCR_HSITRIM_Pos);
+}
+
+/**
+ * @}
+ */
+
+#if defined(RCC_HSI48_SUPPORT)
+/** @defgroup RCC_LL_EF_HSI48 HSI48
+ * @{
+ */
+
+/**
+ * @brief Enable HSI48
+ * @rmtoll CRRCR HSI48ON LL_RCC_HSI48_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI48_Enable(void)
+{
+ SET_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON);
+}
+
+/**
+ * @brief Disable HSI48
+ * @rmtoll CRRCR HSI48ON LL_RCC_HSI48_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_HSI48_Disable(void)
+{
+ CLEAR_BIT(RCC->CRRCR, RCC_CRRCR_HSI48ON);
+}
+
+/**
+ * @brief Check if HSI48 oscillator Ready
+ * @rmtoll CRRCR HSI48RDY LL_RCC_HSI48_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI48_IsReady(void)
+{
+ return (READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48RDY) == (RCC_CRRCR_HSI48RDY));
+}
+
+/**
+ * @brief Get HSI48 Calibration value
+ * @rmtoll CRRCR HSI48CAL LL_RCC_HSI48_GetCalibration
+ * @retval Between Min_Data = 0x00 and Max_Data = 0x1FF
+ */
+__STATIC_INLINE uint32_t LL_RCC_HSI48_GetCalibration(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CRRCR, RCC_CRRCR_HSI48CAL) >> RCC_CRRCR_HSI48CAL_Pos);
+}
+
+/**
+ * @}
+ */
+#endif /* RCC_HSI48_SUPPORT */
+
+/** @defgroup RCC_LL_EF_LSE LSE
+ * @{
+ */
+
+/**
+ * @brief Enable Low Speed External (LSE) crystal.
+ * @rmtoll BDCR LSEON LL_RCC_LSE_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_Enable(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEON);
+}
+
+/**
+ * @brief Disable Low Speed External (LSE) crystal.
+ * @rmtoll BDCR LSEON LL_RCC_LSE_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_Disable(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEON);
+}
+
+/**
+ * @brief Enable external clock source (LSE bypass).
+ * @rmtoll BDCR LSEBYP LL_RCC_LSE_EnableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_EnableBypass(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);
+}
+
+/**
+ * @brief Disable external clock source (LSE bypass).
+ * @rmtoll BDCR LSEBYP LL_RCC_LSE_DisableBypass
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_DisableBypass(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEBYP);
+}
+
+/**
+ * @brief Set LSE oscillator drive capability
+ * @note The oscillator is in Xtal mode when it is not in bypass mode.
+ * @rmtoll BDCR LSEDRV LL_RCC_LSE_SetDriveCapability
+ * @param LSEDrive This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LSEDRIVE_LOW
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH
+ * @arg @ref LL_RCC_LSEDRIVE_HIGH
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_SetDriveCapability(uint32_t LSEDrive)
+{
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEDRV, LSEDrive);
+}
+
+/**
+ * @brief Get LSE oscillator drive capability
+ * @rmtoll BDCR LSEDRV LL_RCC_LSE_GetDriveCapability
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_LSEDRIVE_LOW
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMLOW
+ * @arg @ref LL_RCC_LSEDRIVE_MEDIUMHIGH
+ * @arg @ref LL_RCC_LSEDRIVE_HIGH
+ */
+__STATIC_INLINE uint32_t LL_RCC_LSE_GetDriveCapability(void)
+{
+ return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSEDRV));
+}
+
+/**
+ * @brief Enable Clock security system on LSE.
+ * @rmtoll BDCR LSECSSON LL_RCC_LSE_EnableCSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_EnableCSS(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSECSSON);
+}
+
+/**
+ * @brief Disable Clock security system on LSE.
+ * @note Clock security system can be disabled only after a LSE
+ * failure detection. In that case it MUST be disabled by software.
+ * @rmtoll BDCR LSECSSON LL_RCC_LSE_DisableCSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSE_DisableCSS(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSECSSON);
+}
+
+/**
+ * @brief Check if LSE oscillator Ready
+ * @rmtoll BDCR LSERDY LL_RCC_LSE_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_LSE_IsReady(void)
+{
+ return (READ_BIT(RCC->BDCR, RCC_BDCR_LSERDY) == (RCC_BDCR_LSERDY));
+}
+
+/**
+ * @brief Check if CSS on LSE failure Detection
+ * @rmtoll BDCR LSECSSD LL_RCC_LSE_IsCSSDetected
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_LSE_IsCSSDetected(void)
+{
+ return (READ_BIT(RCC->BDCR, RCC_BDCR_LSECSSD) == (RCC_BDCR_LSECSSD));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_LSI LSI
+ * @{
+ */
+
+/**
+ * @brief Enable LSI Oscillator
+ * @rmtoll CSR LSION LL_RCC_LSI_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSI_Enable(void)
+{
+ SET_BIT(RCC->CSR, RCC_CSR_LSION);
+}
+
+/**
+ * @brief Disable LSI Oscillator
+ * @rmtoll CSR LSION LL_RCC_LSI_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSI_Disable(void)
+{
+ CLEAR_BIT(RCC->CSR, RCC_CSR_LSION);
+}
+
+/**
+ * @brief Check if LSI is Ready
+ * @rmtoll CSR LSIRDY LL_RCC_LSI_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_LSI_IsReady(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_LSIRDY) == (RCC_CSR_LSIRDY));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_MSI MSI
+ * @{
+ */
+
+/**
+ * @brief Enable MSI oscillator
+ * @rmtoll CR MSION LL_RCC_MSI_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_MSI_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_MSION);
+}
+
+/**
+ * @brief Disable MSI oscillator
+ * @rmtoll CR MSION LL_RCC_MSI_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_MSI_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_MSION);
+}
+
+/**
+ * @brief Check if MSI oscillator Ready
+ * @rmtoll CR MSIRDY LL_RCC_MSI_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_MSI_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_MSIRDY) == (RCC_CR_MSIRDY));
+}
+
+/**
+ * @brief Enable MSI PLL-mode (Hardware auto calibration with LSE)
+ * @note MSIPLLEN must be enabled after LSE is enabled (LSEON enabled)
+ * and ready (LSERDY set by hardware)
+ * @note hardware protection to avoid enabling MSIPLLEN if LSE is not
+ * ready
+ * @rmtoll CR MSIPLLEN LL_RCC_MSI_EnablePLLMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_MSI_EnablePLLMode(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_MSIPLLEN);
+}
+
+/**
+ * @brief Disable MSI-PLL mode
+ * @note cleared by hardware when LSE is disabled (LSEON = 0) or when
+ * the Clock Security System on LSE detects a LSE failure
+ * @rmtoll CR MSIPLLEN LL_RCC_MSI_DisablePLLMode
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_MSI_DisablePLLMode(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_MSIPLLEN);
+}
+
+/**
+ * @brief Enable MSI clock range selection with MSIRANGE register
+ * @note Write 0 has no effect. After a standby or a reset
+ * MSIRGSEL is at 0 and the MSI range value is provided by
+ * MSISRANGE
+ * @rmtoll CR MSIRGSEL LL_RCC_MSI_EnableRangeSelection
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_MSI_EnableRangeSelection(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_MSIRGSEL);
+}
+
+/**
+ * @brief Check if MSI clock range is selected with MSIRANGE register
+ * @rmtoll CR MSIRGSEL LL_RCC_MSI_IsEnabledRangeSelect
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_MSI_IsEnabledRangeSelect(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_MSIRGSEL) == (RCC_CR_MSIRGSEL));
+}
+
+/**
+ * @brief Configure the Internal Multi Speed oscillator (MSI) clock range in run mode.
+ * @rmtoll CR MSIRANGE LL_RCC_MSI_SetRange
+ * @param Range This parameter can be one of the following values:
+ * @arg @ref LL_RCC_MSIRANGE_0
+ * @arg @ref LL_RCC_MSIRANGE_1
+ * @arg @ref LL_RCC_MSIRANGE_2
+ * @arg @ref LL_RCC_MSIRANGE_3
+ * @arg @ref LL_RCC_MSIRANGE_4
+ * @arg @ref LL_RCC_MSIRANGE_5
+ * @arg @ref LL_RCC_MSIRANGE_6
+ * @arg @ref LL_RCC_MSIRANGE_7
+ * @arg @ref LL_RCC_MSIRANGE_8
+ * @arg @ref LL_RCC_MSIRANGE_9
+ * @arg @ref LL_RCC_MSIRANGE_10
+ * @arg @ref LL_RCC_MSIRANGE_11
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_MSI_SetRange(uint32_t Range)
+{
+ MODIFY_REG(RCC->CR, RCC_CR_MSIRANGE, Range);
+}
+
+/**
+ * @brief Get the Internal Multi Speed oscillator (MSI) clock range in run mode.
+ * @rmtoll CR MSIRANGE LL_RCC_MSI_GetRange
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_MSIRANGE_0
+ * @arg @ref LL_RCC_MSIRANGE_1
+ * @arg @ref LL_RCC_MSIRANGE_2
+ * @arg @ref LL_RCC_MSIRANGE_3
+ * @arg @ref LL_RCC_MSIRANGE_4
+ * @arg @ref LL_RCC_MSIRANGE_5
+ * @arg @ref LL_RCC_MSIRANGE_6
+ * @arg @ref LL_RCC_MSIRANGE_7
+ * @arg @ref LL_RCC_MSIRANGE_8
+ * @arg @ref LL_RCC_MSIRANGE_9
+ * @arg @ref LL_RCC_MSIRANGE_10
+ * @arg @ref LL_RCC_MSIRANGE_11
+ */
+__STATIC_INLINE uint32_t LL_RCC_MSI_GetRange(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CR, RCC_CR_MSIRANGE));
+}
+
+/**
+ * @brief Configure MSI range used after standby
+ * @rmtoll CSR MSISRANGE LL_RCC_MSI_SetRangeAfterStandby
+ * @param Range This parameter can be one of the following values:
+ * @arg @ref LL_RCC_MSISRANGE_4
+ * @arg @ref LL_RCC_MSISRANGE_5
+ * @arg @ref LL_RCC_MSISRANGE_6
+ * @arg @ref LL_RCC_MSISRANGE_7
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_MSI_SetRangeAfterStandby(uint32_t Range)
+{
+ MODIFY_REG(RCC->CSR, RCC_CSR_MSISRANGE, Range);
+}
+
+/**
+ * @brief Get MSI range used after standby
+ * @rmtoll CSR MSISRANGE LL_RCC_MSI_GetRangeAfterStandby
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_MSISRANGE_4
+ * @arg @ref LL_RCC_MSISRANGE_5
+ * @arg @ref LL_RCC_MSISRANGE_6
+ * @arg @ref LL_RCC_MSISRANGE_7
+ */
+__STATIC_INLINE uint32_t LL_RCC_MSI_GetRangeAfterStandby(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CSR, RCC_CSR_MSISRANGE));
+}
+
+/**
+ * @brief Get MSI Calibration value
+ * @note When MSITRIM is written, MSICAL is updated with the sum of
+ * MSITRIM and the factory trim value
+ * @rmtoll ICSCR MSICAL LL_RCC_MSI_GetCalibration
+ * @retval Between Min_Data = 0 and Max_Data = 255
+ */
+__STATIC_INLINE uint32_t LL_RCC_MSI_GetCalibration(void)
+{
+ return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_MSICAL) >> RCC_ICSCR_MSICAL_Pos);
+}
+
+/**
+ * @brief Set MSI Calibration trimming
+ * @note user-programmable trimming value that is added to the MSICAL
+ * @rmtoll ICSCR MSITRIM LL_RCC_MSI_SetCalibTrimming
+ * @param Value Between Min_Data = 0 and Max_Data = 255
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_MSI_SetCalibTrimming(uint32_t Value)
+{
+ MODIFY_REG(RCC->ICSCR, RCC_ICSCR_MSITRIM, Value << RCC_ICSCR_MSITRIM_Pos);
+}
+
+/**
+ * @brief Get MSI Calibration trimming
+ * @rmtoll ICSCR MSITRIM LL_RCC_MSI_GetCalibTrimming
+ * @retval Between 0 and 255
+ */
+__STATIC_INLINE uint32_t LL_RCC_MSI_GetCalibTrimming(void)
+{
+ return (uint32_t)(READ_BIT(RCC->ICSCR, RCC_ICSCR_MSITRIM) >> RCC_ICSCR_MSITRIM_Pos);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_LSCO LSCO
+ * @{
+ */
+
+/**
+ * @brief Enable Low speed clock
+ * @rmtoll BDCR LSCOEN LL_RCC_LSCO_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSCO_Enable(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_LSCOEN);
+}
+
+/**
+ * @brief Disable Low speed clock
+ * @rmtoll BDCR LSCOEN LL_RCC_LSCO_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSCO_Disable(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSCOEN);
+}
+
+/**
+ * @brief Configure Low speed clock selection
+ * @rmtoll BDCR LSCOSEL LL_RCC_LSCO_SetSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_LSCO_SetSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_LSCOSEL, Source);
+}
+
+/**
+ * @brief Get Low speed clock selection
+ * @rmtoll BDCR LSCOSEL LL_RCC_LSCO_GetSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_LSCO_CLKSOURCE_LSE
+ */
+__STATIC_INLINE uint32_t LL_RCC_LSCO_GetSource(void)
+{
+ return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_LSCOSEL));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_System System
+ * @{
+ */
+
+/**
+ * @brief Configure the system clock source
+ * @rmtoll CFGR SW LL_RCC_SetSysClkSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_MSI
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_HSE
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_PLL
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetSysClkSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, Source);
+}
+
+/**
+ * @brief Get the system clock source
+ * @rmtoll CFGR SWS LL_RCC_GetSysClkSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_MSI
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSI
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_HSE
+ * @arg @ref LL_RCC_SYS_CLKSOURCE_STATUS_PLL
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetSysClkSource(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_SWS));
+}
+
+/**
+ * @brief Set AHB prescaler
+ * @rmtoll CFGR HPRE LL_RCC_SetAHBPrescaler
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SYSCLK_DIV_1
+ * @arg @ref LL_RCC_SYSCLK_DIV_2
+ * @arg @ref LL_RCC_SYSCLK_DIV_4
+ * @arg @ref LL_RCC_SYSCLK_DIV_8
+ * @arg @ref LL_RCC_SYSCLK_DIV_16
+ * @arg @ref LL_RCC_SYSCLK_DIV_64
+ * @arg @ref LL_RCC_SYSCLK_DIV_128
+ * @arg @ref LL_RCC_SYSCLK_DIV_256
+ * @arg @ref LL_RCC_SYSCLK_DIV_512
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetAHBPrescaler(uint32_t Prescaler)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, Prescaler);
+}
+
+/**
+ * @brief Set APB1 prescaler
+ * @rmtoll CFGR PPRE1 LL_RCC_SetAPB1Prescaler
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_APB1_DIV_1
+ * @arg @ref LL_RCC_APB1_DIV_2
+ * @arg @ref LL_RCC_APB1_DIV_4
+ * @arg @ref LL_RCC_APB1_DIV_8
+ * @arg @ref LL_RCC_APB1_DIV_16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetAPB1Prescaler(uint32_t Prescaler)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, Prescaler);
+}
+
+/**
+ * @brief Set APB2 prescaler
+ * @rmtoll CFGR PPRE2 LL_RCC_SetAPB2Prescaler
+ * @param Prescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_APB2_DIV_1
+ * @arg @ref LL_RCC_APB2_DIV_2
+ * @arg @ref LL_RCC_APB2_DIV_4
+ * @arg @ref LL_RCC_APB2_DIV_8
+ * @arg @ref LL_RCC_APB2_DIV_16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetAPB2Prescaler(uint32_t Prescaler)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, Prescaler);
+}
+
+/**
+ * @brief Get AHB prescaler
+ * @rmtoll CFGR HPRE LL_RCC_GetAHBPrescaler
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SYSCLK_DIV_1
+ * @arg @ref LL_RCC_SYSCLK_DIV_2
+ * @arg @ref LL_RCC_SYSCLK_DIV_4
+ * @arg @ref LL_RCC_SYSCLK_DIV_8
+ * @arg @ref LL_RCC_SYSCLK_DIV_16
+ * @arg @ref LL_RCC_SYSCLK_DIV_64
+ * @arg @ref LL_RCC_SYSCLK_DIV_128
+ * @arg @ref LL_RCC_SYSCLK_DIV_256
+ * @arg @ref LL_RCC_SYSCLK_DIV_512
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetAHBPrescaler(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_HPRE));
+}
+
+/**
+ * @brief Get APB1 prescaler
+ * @rmtoll CFGR PPRE1 LL_RCC_GetAPB1Prescaler
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_APB1_DIV_1
+ * @arg @ref LL_RCC_APB1_DIV_2
+ * @arg @ref LL_RCC_APB1_DIV_4
+ * @arg @ref LL_RCC_APB1_DIV_8
+ * @arg @ref LL_RCC_APB1_DIV_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetAPB1Prescaler(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE1));
+}
+
+/**
+ * @brief Get APB2 prescaler
+ * @rmtoll CFGR PPRE2 LL_RCC_GetAPB2Prescaler
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_APB2_DIV_1
+ * @arg @ref LL_RCC_APB2_DIV_2
+ * @arg @ref LL_RCC_APB2_DIV_4
+ * @arg @ref LL_RCC_APB2_DIV_8
+ * @arg @ref LL_RCC_APB2_DIV_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetAPB2Prescaler(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PPRE2));
+}
+
+/**
+ * @brief Set Clock After Wake-Up From Stop mode
+ * @rmtoll CFGR STOPWUCK LL_RCC_SetClkAfterWakeFromStop
+ * @param Clock This parameter can be one of the following values:
+ * @arg @ref LL_RCC_STOP_WAKEUPCLOCK_MSI
+ * @arg @ref LL_RCC_STOP_WAKEUPCLOCK_HSI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetClkAfterWakeFromStop(uint32_t Clock)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_STOPWUCK, Clock);
+}
+
+/**
+ * @brief Get Clock After Wake-Up From Stop mode
+ * @rmtoll CFGR STOPWUCK LL_RCC_GetClkAfterWakeFromStop
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_STOP_WAKEUPCLOCK_MSI
+ * @arg @ref LL_RCC_STOP_WAKEUPCLOCK_HSI
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetClkAfterWakeFromStop(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_STOPWUCK));
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_MCO MCO
+ * @{
+ */
+
+/**
+ * @brief Configure MCOx
+ * @rmtoll CFGR MCOSEL LL_RCC_ConfigMCO\n
+ * CFGR MCOPRE LL_RCC_ConfigMCO
+ * @param MCOxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_MCO1SOURCE_NOCLOCK
+ * @arg @ref LL_RCC_MCO1SOURCE_SYSCLK
+ * @arg @ref LL_RCC_MCO1SOURCE_MSI
+ * @arg @ref LL_RCC_MCO1SOURCE_HSI
+ * @arg @ref LL_RCC_MCO1SOURCE_HSE
+ * @arg @ref LL_RCC_MCO1SOURCE_HSI48 (*)
+ * @arg @ref LL_RCC_MCO1SOURCE_PLLCLK
+ * @arg @ref LL_RCC_MCO1SOURCE_LSI
+ * @arg @ref LL_RCC_MCO1SOURCE_LSE
+ *
+ * (*) value not defined in all devices.
+ * @param MCOxPrescaler This parameter can be one of the following values:
+ * @arg @ref LL_RCC_MCO1_DIV_1
+ * @arg @ref LL_RCC_MCO1_DIV_2
+ * @arg @ref LL_RCC_MCO1_DIV_4
+ * @arg @ref LL_RCC_MCO1_DIV_8
+ * @arg @ref LL_RCC_MCO1_DIV_16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ConfigMCO(uint32_t MCOxSource, uint32_t MCOxPrescaler)
+{
+ MODIFY_REG(RCC->CFGR, RCC_CFGR_MCOSEL | RCC_CFGR_MCOPRE, MCOxSource | MCOxPrescaler);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_Peripheral_Clock_Source Peripheral Clock Source
+ * @{
+ */
+
+/**
+ * @brief Configure USARTx clock source
+ * @rmtoll CCIPR USARTxSEL LL_RCC_SetUSARTClockSource
+ * @param USARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetUSARTClockSource(uint32_t USARTxSource)
+{
+ MODIFY_REG(RCC->CCIPR, (USARTxSource >> 16), (USARTxSource & 0x0000FFFF));
+}
+
+#if defined(UART4) || defined(UART5)
+/**
+ * @brief Configure UARTx clock source
+ * @rmtoll CCIPR UARTxSEL LL_RCC_SetUARTClockSource
+ * @param UARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_LSE
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetUARTClockSource(uint32_t UARTxSource)
+{
+ MODIFY_REG(RCC->CCIPR, (UARTxSource >> 16), (UARTxSource & 0x0000FFFF));
+}
+#endif /* UART4 || UART5 */
+
+/**
+ * @brief Configure LPUART1x clock source
+ * @rmtoll CCIPR LPUART1SEL LL_RCC_SetLPUARTClockSource
+ * @param LPUARTxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_LPUART1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetLPUARTClockSource(uint32_t LPUARTxSource)
+{
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_LPUART1SEL, LPUARTxSource);
+}
+
+/**
+ * @brief Configure I2Cx clock source
+ * @rmtoll CCIPR I2CxSEL LL_RCC_SetI2CClockSource
+ * @param I2CxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI (*)
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetI2CClockSource(uint32_t I2CxSource)
+{
+ __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)(RCC_BASE + 0x88U + (I2CxSource >> 24U));
+ MODIFY_REG(*reg, 3U << ((I2CxSource & 0x00FF0000U) >> 16U), ((I2CxSource & 0x000000FFU) << ((I2CxSource & 0x00FF0000U) >> 16U)));
+}
+
+/**
+ * @brief Configure LPTIMx clock source
+ * @rmtoll CCIPR LPTIMxSEL LL_RCC_SetLPTIMClockSource
+ * @param LPTIMxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetLPTIMClockSource(uint32_t LPTIMxSource)
+{
+ MODIFY_REG(RCC->CCIPR, (LPTIMxSource & 0xFFFF0000U), (LPTIMxSource << 16U));
+}
+
+/**
+ * @brief Configure SAIx clock source
+ @if STM32L4S9xx
+ * @rmtoll CCIPR2 SAIxSEL LL_RCC_SetSAIClockSource
+ @else
+ * @rmtoll CCIPR SAIxSEL LL_RCC_SetSAIClockSource
+ @endif
+ * @param SAIxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI1
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI2 (*)
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI1 (*)
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI2 (*)
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL (*)
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PIN (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetSAIClockSource(uint32_t SAIxSource)
+{
+#if defined(RCC_CCIPR2_SAI1SEL)
+ MODIFY_REG(RCC->CCIPR2, (SAIxSource >> 16U), (SAIxSource & 0x0000FFFFU));
+#else
+ MODIFY_REG(RCC->CCIPR, (SAIxSource & 0xFFFF0000U), (SAIxSource << 16U));
+#endif /* RCC_CCIPR2_SAI1SEL */
+}
+
+#if defined(RCC_CCIPR2_SDMMCSEL)
+/**
+ * @brief Configure SDMMC1 kernel clock source
+ * @rmtoll CCIPR2 SDMMCSEL LL_RCC_SetSDMMCKernelClockSource
+ * @param SDMMCxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE_48CLK (*)
+ * @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE_PLLP (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetSDMMCKernelClockSource(uint32_t SDMMCxSource)
+{
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_SDMMCSEL, SDMMCxSource);
+}
+#endif /* RCC_CCIPR2_SDMMCSEL */
+
+/**
+ * @brief Configure SDMMC1 clock source
+ * @rmtoll CCIPR CLK48SEL LL_RCC_SetSDMMCClockSource
+ * @param SDMMCxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_NONE (*)
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_HSI48 (*)
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLLSAI1 (*)
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_MSI (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetSDMMCClockSource(uint32_t SDMMCxSource)
+{
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, SDMMCxSource);
+}
+
+/**
+ * @brief Configure RNG clock source
+ * @rmtoll CCIPR CLK48SEL LL_RCC_SetRNGClockSource
+ * @param RNGxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_RNG_CLKSOURCE_NONE (*)
+ * @arg @ref LL_RCC_RNG_CLKSOURCE_HSI48 (*)
+ * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI1
+ * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_RNG_CLKSOURCE_MSI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetRNGClockSource(uint32_t RNGxSource)
+{
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, RNGxSource);
+}
+
+#if defined(USB_OTG_FS) || defined(USB)
+/**
+ * @brief Configure USB clock source
+ * @rmtoll CCIPR CLK48SEL LL_RCC_SetUSBClockSource
+ * @param USBxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE_NONE (*)
+ * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 (*)
+ * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI1
+ * @arg @ref LL_RCC_USB_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_USB_CLKSOURCE_MSI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetUSBClockSource(uint32_t USBxSource)
+{
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_CLK48SEL, USBxSource);
+}
+#endif /* USB_OTG_FS || USB */
+
+/**
+ * @brief Configure ADC clock source
+ * @rmtoll CCIPR ADCSEL LL_RCC_SetADCClockSource
+ * @param ADCxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_ADC_CLKSOURCE_NONE
+ * @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI1
+ * @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI2 (*)
+ * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetADCClockSource(uint32_t ADCxSource)
+{
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_ADCSEL, ADCxSource);
+}
+
+#if defined(SWPMI1)
+/**
+ * @brief Configure SWPMI clock source
+ * @rmtoll CCIPR SWPMI1SEL LL_RCC_SetSWPMIClockSource
+ * @param SWPMIxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SWPMI1_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_SWPMI1_CLKSOURCE_HSI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetSWPMIClockSource(uint32_t SWPMIxSource)
+{
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_SWPMI1SEL, SWPMIxSource);
+}
+#endif /* SWPMI1 */
+
+#if defined(DFSDM1_Channel0)
+#if defined(RCC_CCIPR2_ADFSDM1SEL)
+/**
+ * @brief Configure DFSDM Audio clock source
+ * @rmtoll CCIPR2 ADFSDM1SEL LL_RCC_SetDFSDMAudioClockSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1
+ * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_MSI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetDFSDMAudioClockSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_ADFSDM1SEL, Source);
+}
+#endif /* RCC_CCIPR2_ADFSDM1SEL */
+
+/**
+ * @brief Configure DFSDM Kernel clock source
+ @if STM32L4S9xx
+ * @rmtoll CCIPR2 DFSDM1SEL LL_RCC_SetDFSDMClockSource
+ @else
+ * @rmtoll CCIPR DFSDM1SEL LL_RCC_SetDFSDMClockSource
+ @endif
+ * @param DFSDMxSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2
+ * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetDFSDMClockSource(uint32_t DFSDMxSource)
+{
+#if defined(RCC_CCIPR2_DFSDM1SEL)
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DFSDM1SEL, DFSDMxSource);
+#else
+ MODIFY_REG(RCC->CCIPR, RCC_CCIPR_DFSDM1SEL, DFSDMxSource);
+#endif /* RCC_CCIPR2_DFSDM1SEL */
+}
+#endif /* DFSDM1_Channel0 */
+
+#if defined(DSI)
+/**
+ * @brief Configure DSI clock source
+ * @rmtoll CCIPR2 DSISEL LL_RCC_SetDSIClockSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY
+ * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetDSIClockSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_DSISEL, Source);
+}
+#endif /* DSI */
+
+#if defined(LTDC)
+/**
+ * @brief Configure LTDC Clock Source
+ * @rmtoll CCIPR2 PLLSAI2DIVR LL_RCC_SetLTDCClockSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV2
+ * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV4
+ * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV8
+ * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetLTDCClockSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR, Source);
+}
+#endif /* LTDC */
+
+#if defined(OCTOSPI1)
+/**
+ * @brief Configure OCTOSPI clock source
+ * @rmtoll CCIPR2 OSPISEL LL_RCC_SetOCTOSPIClockSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_MSI
+ * @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_PLL
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetOCTOSPIClockSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_OSPISEL, Source);
+}
+#endif /* OCTOSPI1 */
+
+/**
+ * @brief Get USARTx clock source
+ * @rmtoll CCIPR USARTxSEL LL_RCC_GetUSARTClockSource
+ * @param USARTx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE
+ * @arg @ref LL_RCC_USART2_CLKSOURCE
+ * @arg @ref LL_RCC_USART3_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_PCLK2
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART1_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_USART2_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_HSI (*)
+ * @arg @ref LL_RCC_USART3_CLKSOURCE_LSE (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetUSARTClockSource(uint32_t USARTx)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR, USARTx) | (USARTx << 16U));
+}
+
+#if defined(UART4) || defined(UART5)
+/**
+ * @brief Get UARTx clock source
+ * @rmtoll CCIPR UARTxSEL LL_RCC_GetUARTClockSource
+ * @param UARTx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_UART4_CLKSOURCE
+ * @arg @ref LL_RCC_UART5_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_UART4_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_UART5_CLKSOURCE_LSE
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetUARTClockSource(uint32_t UARTx)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR, UARTx) | (UARTx << 16U));
+}
+#endif /* UART4 || UART5 */
+
+/**
+ * @brief Get LPUARTx clock source
+ * @rmtoll CCIPR LPUART1SEL LL_RCC_GetLPUARTClockSource
+ * @param LPUARTx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LPUART1_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_LPUART1_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_LPUART1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_LPUART1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_LPUART1_CLKSOURCE_LSE
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetLPUARTClockSource(uint32_t LPUARTx)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR, LPUARTx));
+}
+
+/**
+ * @brief Get I2Cx clock source
+ * @rmtoll CCIPR I2CxSEL LL_RCC_GetI2CClockSource
+ * @param I2Cx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE (*)
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_I2C1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_I2C2_CLKSOURCE_HSI (*)
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_I2C3_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE_PCLK1 (*)
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE_SYSCLK (*)
+ * @arg @ref LL_RCC_I2C4_CLKSOURCE_HSI (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetI2CClockSource(uint32_t I2Cx)
+{
+ __IO uint32_t *reg = (__IO uint32_t *)(uint32_t)(RCC_BASE + 0x88U + (I2Cx >> 24U));
+ return (uint32_t)((READ_BIT(*reg, 3U << ((I2Cx & 0x00FF0000U) >> 16U)) >> ((I2Cx & 0x00FF0000U) >> 16U)) | (I2Cx & 0xFFFF0000U));
+}
+
+/**
+ * @brief Get LPTIMx clock source
+ * @rmtoll CCIPR LPTIMxSEL LL_RCC_GetLPTIMClockSource
+ * @param LPTIMx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE
+ * @arg @ref LL_RCC_LPTIM2_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_LPTIM1_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_LPTIM2_CLKSOURCE_LSE
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetLPTIMClockSource(uint32_t LPTIMx)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR, LPTIMx) >> 16U | LPTIMx);
+}
+
+/**
+ * @brief Get SAIx clock source
+ @if STM32L4S9xx
+ * @rmtoll CCIPR2 SAIxSEL LL_RCC_GetSAIClockSource
+ @else
+ * @rmtoll CCIPR SAIxSEL LL_RCC_GetSAIClockSource
+ @endif
+ * @param SAIx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI1
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLLSAI2 (*)
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_SAI1_CLKSOURCE_PIN
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI1 (*)
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLLSAI2 (*)
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PLL (*)
+ * @arg @ref LL_RCC_SAI2_CLKSOURCE_PIN (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetSAIClockSource(uint32_t SAIx)
+{
+#if defined(RCC_CCIPR2_SAI1SEL)
+ return (uint32_t)(READ_BIT(RCC->CCIPR2, SAIx) | (SAIx << 16U));
+#else
+ return (uint32_t)(READ_BIT(RCC->CCIPR, SAIx) >> 16U | SAIx);
+#endif /* RCC_CCIPR2_SAI1SEL */
+}
+
+#if defined(RCC_CCIPR2_SDMMCSEL)
+/**
+ * @brief Get SDMMCx kernel clock source
+ * @rmtoll CCIPR2 SDMMCSEL LL_RCC_GetSDMMCKernelClockSource
+ * @param SDMMCx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE_48CLK (*)
+ * @arg @ref LL_RCC_SDMMC1_KERNELCLKSOURCE_PLL (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetSDMMCKernelClockSource(uint32_t SDMMCx)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR2, SDMMCx));
+}
+#endif /* RCC_CCIPR2_SDMMCSEL */
+
+/**
+ * @brief Get SDMMCx clock source
+ * @rmtoll CCIPR CLK48SEL LL_RCC_GetSDMMCClockSource
+ * @param SDMMCx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_NONE (*)
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_HSI48 (*)
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLLSAI1 (*)
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_SDMMC1_CLKSOURCE_MSI (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetSDMMCClockSource(uint32_t SDMMCx)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR, SDMMCx));
+}
+
+/**
+ * @brief Get RNGx clock source
+ * @rmtoll CCIPR CLK48SEL LL_RCC_GetRNGClockSource
+ * @param RNGx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_RNG_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_RNG_CLKSOURCE_NONE (*)
+ * @arg @ref LL_RCC_RNG_CLKSOURCE_HSI48 (*)
+ * @arg @ref LL_RCC_RNG_CLKSOURCE_PLLSAI1
+ * @arg @ref LL_RCC_RNG_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_RNG_CLKSOURCE_MSI
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetRNGClockSource(uint32_t RNGx)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR, RNGx));
+}
+
+#if defined(USB_OTG_FS) || defined(USB)
+/**
+ * @brief Get USBx clock source
+ * @rmtoll CCIPR CLK48SEL LL_RCC_GetUSBClockSource
+ * @param USBx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_USB_CLKSOURCE_NONE (*)
+ * @arg @ref LL_RCC_USB_CLKSOURCE_HSI48 (*)
+ * @arg @ref LL_RCC_USB_CLKSOURCE_PLLSAI1
+ * @arg @ref LL_RCC_USB_CLKSOURCE_PLL
+ * @arg @ref LL_RCC_USB_CLKSOURCE_MSI
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetUSBClockSource(uint32_t USBx)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR, USBx));
+}
+#endif /* USB_OTG_FS || USB */
+
+/**
+ * @brief Get ADCx clock source
+ * @rmtoll CCIPR ADCSEL LL_RCC_GetADCClockSource
+ * @param ADCx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_ADC_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_ADC_CLKSOURCE_NONE
+ * @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI1
+ * @arg @ref LL_RCC_ADC_CLKSOURCE_PLLSAI2 (*)
+ * @arg @ref LL_RCC_ADC_CLKSOURCE_SYSCLK
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetADCClockSource(uint32_t ADCx)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR, ADCx));
+}
+
+#if defined(SWPMI1)
+/**
+ * @brief Get SWPMIx clock source
+ * @rmtoll CCIPR SWPMI1SEL LL_RCC_GetSWPMIClockSource
+ * @param SPWMIx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_SWPMI1_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_SWPMI1_CLKSOURCE_PCLK1
+ * @arg @ref LL_RCC_SWPMI1_CLKSOURCE_HSI
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetSWPMIClockSource(uint32_t SPWMIx)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR, SPWMIx));
+}
+#endif /* SWPMI1 */
+
+#if defined(DFSDM1_Channel0)
+#if defined(RCC_CCIPR2_ADFSDM1SEL)
+/**
+ * @brief Get DFSDM Audio Clock Source
+ * @rmtoll CCIPR2 ADFSDM1SEL LL_RCC_GetDFSDMAudioClockSource
+ * @param DFSDMx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_SAI1
+ * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_HSI
+ * @arg @ref LL_RCC_DFSDM1_AUDIO_CLKSOURCE_MSI
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetDFSDMAudioClockSource(uint32_t DFSDMx)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR2, DFSDMx));
+}
+#endif /* RCC_CCIPR2_ADFSDM1SEL */
+
+/**
+ * @brief Get DFSDMx Kernel clock source
+ @if STM32L4S9xx
+ * @rmtoll CCIPR2 DFSDM1SEL LL_RCC_GetDFSDMClockSource
+ @else
+ * @rmtoll CCIPR DFSDM1SEL LL_RCC_GetDFSDMClockSource
+ @endif
+ * @param DFSDMx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_PCLK2
+ * @arg @ref LL_RCC_DFSDM1_CLKSOURCE_SYSCLK
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetDFSDMClockSource(uint32_t DFSDMx)
+{
+#if defined(RCC_CCIPR2_DFSDM1SEL)
+ return (uint32_t)(READ_BIT(RCC->CCIPR2, DFSDMx));
+#else
+ return (uint32_t)(READ_BIT(RCC->CCIPR, DFSDMx));
+#endif /* RCC_CCIPR2_DFSDM1SEL */
+}
+#endif /* DFSDM1_Channel0 */
+
+#if defined(DSI)
+/**
+ * @brief Get DSI Clock Source
+ * @rmtoll CCIPR2 DSISEL LL_RCC_GetDSIClockSource
+ * @param DSIx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_DSI_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_DSI_CLKSOURCE_PHY
+ * @arg @ref LL_RCC_DSI_CLKSOURCE_PLL
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetDSIClockSource(uint32_t DSIx)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR2, DSIx));
+}
+#endif /* DSI */
+
+#if defined(LTDC)
+/**
+ * @brief Get LTDC Clock Source
+ * @rmtoll CCIPR2 PLLSAI2DIVR LL_RCC_GetLTDCClockSource
+ * @param LTDCx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_LTDC_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV2
+ * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV4
+ * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV8
+ * @arg @ref LL_RCC_LTDC_CLKSOURCE_PLLSAI2R_DIV16
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetLTDCClockSource(uint32_t LTDCx)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR2, LTDCx));
+}
+#endif /* LTDC */
+
+#if defined(OCTOSPI1)
+/**
+ * @brief Get OCTOSPI clock source
+ * @rmtoll CCIPR2 OSPISEL LL_RCC_GetOCTOSPIClockSource
+ * @param OCTOSPIx This parameter can be one of the following values:
+ * @arg @ref LL_RCC_OCTOSPI_CLKSOURCE
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_SYSCLK
+ * @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_MSI
+ * @arg @ref LL_RCC_OCTOSPI_CLKSOURCE_PLL
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetOCTOSPIClockSource(uint32_t OCTOSPIx)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR2, OCTOSPIx));
+}
+#endif /* OCTOSPI1 */
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_RTC RTC
+ * @{
+ */
+
+/**
+ * @brief Set RTC Clock Source
+ * @note Once the RTC clock source has been selected, it cannot be changed anymore unless
+ * the Backup domain is reset, or unless a failure is detected on LSE (LSECSSD is
+ * set). The BDRST bit can be used to reset them.
+ * @rmtoll BDCR RTCSEL LL_RCC_SetRTCClockSource
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_SetRTCClockSource(uint32_t Source)
+{
+ MODIFY_REG(RCC->BDCR, RCC_BDCR_RTCSEL, Source);
+}
+
+/**
+ * @brief Get RTC Clock Source
+ * @rmtoll BDCR RTCSEL LL_RCC_GetRTCClockSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_NONE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSE
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_LSI
+ * @arg @ref LL_RCC_RTC_CLKSOURCE_HSE_DIV32
+ */
+__STATIC_INLINE uint32_t LL_RCC_GetRTCClockSource(void)
+{
+ return (uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL));
+}
+
+/**
+ * @brief Enable RTC
+ * @rmtoll BDCR RTCEN LL_RCC_EnableRTC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableRTC(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_RTCEN);
+}
+
+/**
+ * @brief Disable RTC
+ * @rmtoll BDCR RTCEN LL_RCC_DisableRTC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableRTC(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_RTCEN);
+}
+
+/**
+ * @brief Check if RTC has been enabled or not
+ * @rmtoll BDCR RTCEN LL_RCC_IsEnabledRTC
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledRTC(void)
+{
+ return (READ_BIT(RCC->BDCR, RCC_BDCR_RTCEN) == (RCC_BDCR_RTCEN));
+}
+
+/**
+ * @brief Force the Backup domain reset
+ * @rmtoll BDCR BDRST LL_RCC_ForceBackupDomainReset
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ForceBackupDomainReset(void)
+{
+ SET_BIT(RCC->BDCR, RCC_BDCR_BDRST);
+}
+
+/**
+ * @brief Release the Backup domain reset
+ * @rmtoll BDCR BDRST LL_RCC_ReleaseBackupDomainReset
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ReleaseBackupDomainReset(void)
+{
+ CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST);
+}
+
+/**
+ * @}
+ */
+
+
+/** @defgroup RCC_LL_EF_PLL PLL
+ * @{
+ */
+
+/**
+ * @brief Enable PLL
+ * @rmtoll CR PLLON LL_RCC_PLL_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_PLLON);
+}
+
+/**
+ * @brief Disable PLL
+ * @note Cannot be disabled if the PLL clock is used as the system clock
+ * @rmtoll CR PLLON LL_RCC_PLL_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLON);
+}
+
+/**
+ * @brief Check if PLL Ready
+ * @rmtoll CR PLLRDY LL_RCC_PLL_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_PLLRDY) == (RCC_CR_PLLRDY));
+}
+
+/**
+ * @brief Configure PLL used for SYSCLK Domain
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLSAI1 and PLLSAI2 (*) are disabled.
+ * @note PLLN/PLLR can be written only when PLL is disabled.
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SYS\n
+ * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SYS\n
+ * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SYS\n
+ * PLLCFGR PLLR LL_RCC_PLL_ConfigDomain_SYS
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_10 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_11 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_12 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_13 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_14 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_15 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_16 (*)
+ *
+ * (*) value not defined in all devices.
+ * @param PLLN Between 8 and 86
+ * @param PLLR This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLR_DIV_2
+ * @arg @ref LL_RCC_PLLR_DIV_4
+ * @arg @ref LL_RCC_PLLR_DIV_6
+ * @arg @ref LL_RCC_PLLR_DIV_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SYS(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLR,
+ Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLR);
+}
+
+#if defined(RCC_PLLP_DIV_2_31_SUPPORT)
+/**
+ * @brief Configure PLL used for SAI domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLSAI1 and PLLSAI2 (*) are disabled.
+ * @note PLLN/PLLP can be written only when PLL is disabled.
+ * @note This can be selected for SAI1 or SAI2 (*)
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SAI\n
+ * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SAI\n
+ * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SAI\n
+ * PLLCFGR PLLPDIV LL_RCC_PLL_ConfigDomain_SAI
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_10 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_11 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_12 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_13 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_14 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_15 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_16 (*)
+ *
+ * (*) value not defined in all devices.
+ * @param PLLN Between 8 and 86
+ * @param PLLP This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLP_DIV_2
+ * @arg @ref LL_RCC_PLLP_DIV_3
+ * @arg @ref LL_RCC_PLLP_DIV_4
+ * @arg @ref LL_RCC_PLLP_DIV_5
+ * @arg @ref LL_RCC_PLLP_DIV_6
+ * @arg @ref LL_RCC_PLLP_DIV_7
+ * @arg @ref LL_RCC_PLLP_DIV_8
+ * @arg @ref LL_RCC_PLLP_DIV_9
+ * @arg @ref LL_RCC_PLLP_DIV_10
+ * @arg @ref LL_RCC_PLLP_DIV_11
+ * @arg @ref LL_RCC_PLLP_DIV_12
+ * @arg @ref LL_RCC_PLLP_DIV_13
+ * @arg @ref LL_RCC_PLLP_DIV_14
+ * @arg @ref LL_RCC_PLLP_DIV_15
+ * @arg @ref LL_RCC_PLLP_DIV_16
+ * @arg @ref LL_RCC_PLLP_DIV_17
+ * @arg @ref LL_RCC_PLLP_DIV_18
+ * @arg @ref LL_RCC_PLLP_DIV_19
+ * @arg @ref LL_RCC_PLLP_DIV_20
+ * @arg @ref LL_RCC_PLLP_DIV_21
+ * @arg @ref LL_RCC_PLLP_DIV_22
+ * @arg @ref LL_RCC_PLLP_DIV_23
+ * @arg @ref LL_RCC_PLLP_DIV_24
+ * @arg @ref LL_RCC_PLLP_DIV_25
+ * @arg @ref LL_RCC_PLLP_DIV_26
+ * @arg @ref LL_RCC_PLLP_DIV_27
+ * @arg @ref LL_RCC_PLLP_DIV_28
+ * @arg @ref LL_RCC_PLLP_DIV_29
+ * @arg @ref LL_RCC_PLLP_DIV_30
+ * @arg @ref LL_RCC_PLLP_DIV_31
+ * @retval None
+ */
+#else
+/**
+ * @brief Configure PLL used for SAI domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLSAI1 and PLLSAI2 (*) are disabled.
+ * @note PLLN/PLLP can be written only when PLL is disabled.
+ * @note This can be selected for SAI1 or SAI2 (*)
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_SAI\n
+ * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_SAI\n
+ * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_SAI\n
+ * PLLCFGR PLLP LL_RCC_PLL_ConfigDomain_SAI
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param PLLN Between 8 and 86
+ * @param PLLP This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLP_DIV_7
+ * @arg @ref LL_RCC_PLLP_DIV_17
+ * @retval None
+ */
+#endif /* RCC_PLLP_DIV_2_31_SUPPORT */
+__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
+{
+#if defined(RCC_PLLP_DIV_2_31_SUPPORT)
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLPDIV,
+ Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLP);
+#else
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLP,
+ Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLP);
+#endif /* RCC_PLLP_DIV_2_31_SUPPORT */
+}
+
+/**
+ * @brief Configure PLL used for 48Mhz domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLSAI1 and PLLSAI2 (*) are disabled.
+ * @note PLLN/PLLQ can be written only when PLL is disabled.
+ * @note This can be selected for USB, RNG, SDMMC
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_ConfigDomain_48M\n
+ * PLLCFGR PLLM LL_RCC_PLL_ConfigDomain_48M\n
+ * PLLCFGR PLLN LL_RCC_PLL_ConfigDomain_48M\n
+ * PLLCFGR PLLQ LL_RCC_PLL_ConfigDomain_48M
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_10 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_11 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_12 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_13 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_14 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_15 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_16 (*)
+ *
+ * (*) value not defined in all devices.
+ * @param PLLN Between 8 and 86
+ * @param PLLQ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLQ_DIV_2
+ * @arg @ref LL_RCC_PLLQ_DIV_4
+ * @arg @ref LL_RCC_PLLQ_DIV_6
+ * @arg @ref LL_RCC_PLLQ_DIV_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM | RCC_PLLCFGR_PLLN | RCC_PLLCFGR_PLLQ,
+ Source | PLLM | PLLN << RCC_PLLCFGR_PLLN_Pos | PLLQ);
+}
+
+/**
+ * @brief Configure PLL clock source
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_SetMainSource
+ * @param PLLSource This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_SetMainSource(uint32_t PLLSource)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, PLLSource);
+}
+
+/**
+ * @brief Get the oscillator used as PLL clock source.
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLL_GetMainSource
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetMainSource(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC));
+}
+
+/**
+ * @brief Get Main PLL multiplication factor for VCO
+ * @rmtoll PLLCFGR PLLN LL_RCC_PLL_GetN
+ * @retval Between 8 and 86
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetN(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLN) >> RCC_PLLCFGR_PLLN_Pos);
+}
+
+#if defined(RCC_PLLP_DIV_2_31_SUPPORT)
+/**
+ * @brief Get Main PLL division factor for PLLP
+ * @note Used for PLLSAI3CLK (SAI1 and SAI2 clock)
+ * @rmtoll PLLCFGR PLLPDIV LL_RCC_PLL_GetP
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLP_DIV_2
+ * @arg @ref LL_RCC_PLLP_DIV_3
+ * @arg @ref LL_RCC_PLLP_DIV_4
+ * @arg @ref LL_RCC_PLLP_DIV_5
+ * @arg @ref LL_RCC_PLLP_DIV_6
+ * @arg @ref LL_RCC_PLLP_DIV_7
+ * @arg @ref LL_RCC_PLLP_DIV_8
+ * @arg @ref LL_RCC_PLLP_DIV_9
+ * @arg @ref LL_RCC_PLLP_DIV_10
+ * @arg @ref LL_RCC_PLLP_DIV_11
+ * @arg @ref LL_RCC_PLLP_DIV_12
+ * @arg @ref LL_RCC_PLLP_DIV_13
+ * @arg @ref LL_RCC_PLLP_DIV_14
+ * @arg @ref LL_RCC_PLLP_DIV_15
+ * @arg @ref LL_RCC_PLLP_DIV_16
+ * @arg @ref LL_RCC_PLLP_DIV_17
+ * @arg @ref LL_RCC_PLLP_DIV_18
+ * @arg @ref LL_RCC_PLLP_DIV_19
+ * @arg @ref LL_RCC_PLLP_DIV_20
+ * @arg @ref LL_RCC_PLLP_DIV_21
+ * @arg @ref LL_RCC_PLLP_DIV_22
+ * @arg @ref LL_RCC_PLLP_DIV_23
+ * @arg @ref LL_RCC_PLLP_DIV_24
+ * @arg @ref LL_RCC_PLLP_DIV_25
+ * @arg @ref LL_RCC_PLLP_DIV_26
+ * @arg @ref LL_RCC_PLLP_DIV_27
+ * @arg @ref LL_RCC_PLLP_DIV_28
+ * @arg @ref LL_RCC_PLLP_DIV_29
+ * @arg @ref LL_RCC_PLLP_DIV_30
+ * @arg @ref LL_RCC_PLLP_DIV_31
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPDIV));
+}
+#else
+/**
+ * @brief Get Main PLL division factor for PLLP
+ * @note Used for PLLSAI3CLK (SAI1 and SAI2 clock)
+ * @rmtoll PLLCFGR PLLP LL_RCC_PLL_GetP
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLP_DIV_7
+ * @arg @ref LL_RCC_PLLP_DIV_17
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetP(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLP));
+}
+#endif /* RCC_PLLP_DIV_2_31_SUPPORT */
+
+/**
+ * @brief Get Main PLL division factor for PLLQ
+ * @note Used for PLL48M1CLK selected for USB, RNG, SDMMC (48 MHz clock)
+ * @rmtoll PLLCFGR PLLQ LL_RCC_PLL_GetQ
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLQ_DIV_2
+ * @arg @ref LL_RCC_PLLQ_DIV_4
+ * @arg @ref LL_RCC_PLLQ_DIV_6
+ * @arg @ref LL_RCC_PLLQ_DIV_8
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetQ(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQ));
+}
+
+/**
+ * @brief Get Main PLL division factor for PLLR
+ * @note Used for PLLCLK (system clock)
+ * @rmtoll PLLCFGR PLLR LL_RCC_PLL_GetR
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLR_DIV_2
+ * @arg @ref LL_RCC_PLLR_DIV_4
+ * @arg @ref LL_RCC_PLLR_DIV_6
+ * @arg @ref LL_RCC_PLLR_DIV_8
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetR(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLR));
+}
+
+/**
+ * @brief Get Division factor for the main PLL and other PLL
+ * @rmtoll PLLCFGR PLLM LL_RCC_PLL_GetDivider
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @arg @ref LL_RCC_PLLM_DIV_9 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_10 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_11 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_12 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_13 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_14 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_15 (*)
+ * @arg @ref LL_RCC_PLLM_DIV_16 (*)
+ *
+ * (*) value not defined in all devices.
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLL_GetDivider(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM));
+}
+
+/**
+ * @brief Enable PLL output mapped on SAI domain clock
+ * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_EnableDomain_SAI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_EnableDomain_SAI(void)
+{
+ SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN);
+}
+
+/**
+ * @brief Disable PLL output mapped on SAI domain clock
+ * @note Cannot be disabled if the PLL clock is used as the system
+ * clock
+ * @note In order to save power, when the PLLCLK of the PLL is
+ * not used, should be 0
+ * @rmtoll PLLCFGR PLLPEN LL_RCC_PLL_DisableDomain_SAI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_DisableDomain_SAI(void)
+{
+ CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLPEN);
+}
+
+/**
+ * @brief Enable PLL output mapped on 48MHz domain clock
+ * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_EnableDomain_48M
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_EnableDomain_48M(void)
+{
+ SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN);
+}
+
+/**
+ * @brief Disable PLL output mapped on 48MHz domain clock
+ * @note Cannot be disabled if the PLL clock is used as the system
+ * clock
+ * @note In order to save power, when the PLLCLK of the PLL is
+ * not used, should be 0
+ * @rmtoll PLLCFGR PLLQEN LL_RCC_PLL_DisableDomain_48M
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_DisableDomain_48M(void)
+{
+ CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLQEN);
+}
+
+/**
+ * @brief Enable PLL output mapped on SYSCLK domain
+ * @rmtoll PLLCFGR PLLREN LL_RCC_PLL_EnableDomain_SYS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_EnableDomain_SYS(void)
+{
+ SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN);
+}
+
+/**
+ * @brief Disable PLL output mapped on SYSCLK domain
+ * @note Cannot be disabled if the PLL clock is used as the system
+ * clock
+ * @note In order to save power, when the PLLCLK of the PLL is
+ * not used, Main PLL should be 0
+ * @rmtoll PLLCFGR PLLREN LL_RCC_PLL_DisableDomain_SYS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLL_DisableDomain_SYS(void)
+{
+ CLEAR_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLREN);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_PLLSAI1 PLLSAI1
+ * @{
+ */
+
+/**
+ * @brief Enable PLLSAI1
+ * @rmtoll CR PLLSAI1ON LL_RCC_PLLSAI1_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_PLLSAI1ON);
+}
+
+/**
+ * @brief Disable PLLSAI1
+ * @rmtoll CR PLLSAI1ON LL_RCC_PLLSAI1_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLSAI1ON);
+}
+
+/**
+ * @brief Check if PLLSAI1 Ready
+ * @rmtoll CR PLLSAI1RDY LL_RCC_PLLSAI1_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_PLLSAI1RDY) == (RCC_CR_PLLSAI1RDY));
+}
+
+#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
+/**
+ * @brief Configure PLLSAI1 used for 48Mhz domain clock
+ * @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled.
+ * @note PLLSAI1M/PLLSAI1N/PLLSAI1Q can be written only when PLLSAI1 is disabled.
+ * @note This can be selected for USB, RNG, SDMMC
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_48M\n
+ * PLLSAI1CFGR PLLSAI1M LL_RCC_PLLSAI1_ConfigDomain_48M\n
+ * PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_48M\n
+ * PLLSAI1CFGR PLLSAI1Q LL_RCC_PLLSAI1_ConfigDomain_48M
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_1
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_3
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_5
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_8
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_9
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_10
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_11
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_12
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_13
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_14
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_15
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_16
+ * @param PLLN Between 8 and 86
+ * @param PLLQ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source);
+ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1Q,
+ PLLM | PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLQ);
+}
+#else
+/**
+ * @brief Configure PLLSAI1 used for 48Mhz domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLSAI1 and PLLSAI2 (*) are disabled.
+ * @note PLLSAI1N/PLLSAI1Q can be written only when PLLSAI1 is disabled.
+ * @note This can be selected for USB, RNG, SDMMC
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_48M\n
+ * PLLCFGR PLLM LL_RCC_PLLSAI1_ConfigDomain_48M\n
+ * PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_48M\n
+ * PLLSAI1CFGR PLLSAI1Q LL_RCC_PLLSAI1_ConfigDomain_48M
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param PLLN Between 8 and 86
+ * @param PLLQ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_48M(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
+ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1Q, PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLQ);
+}
+#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
+
+#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
+/**
+ * @brief Configure PLLSAI1 used for SAI domain clock
+ * @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled.
+ * @note PLLSAI1M/PLLSAI1N/PLLSAI1PDIV can be written only when PLLSAI1 is disabled.
+ * @note This can be selected for SAI1 or SAI2
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_SAI\n
+ * PLLSAI1CFGR PLLSAI1M LL_RCC_PLLSAI1_ConfigDomain_SAI\n
+ * PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_SAI\n
+ * PLLSAI1CFGR PLLSAI1PDIV LL_RCC_PLLSAI1_ConfigDomain_SAI
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_1
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_3
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_5
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_8
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_9
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_10
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_11
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_12
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_13
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_14
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_15
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_16
+ * @param PLLN Between 8 and 86
+ * @param PLLP This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_3
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_5
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_8
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_9
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_10
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_11
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_12
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_13
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_14
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_15
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_16
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_17
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_18
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_19
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_20
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_21
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_22
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_23
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_24
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_25
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_26
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_27
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_28
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_29
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_30
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_31
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source);
+ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1PDIV,
+ PLLM | PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLP);
+}
+#elif defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
+/**
+ * @brief Configure PLLSAI1 used for SAI domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLSAI1 and PLLSAI2 (*) are disabled.
+ * @note PLLSAI1N/PLLSAI1PDIV can be written only when PLLSAI1 is disabled.
+ * @note This can be selected for SAI1 or SAI2 (*)
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_SAI\n
+ * PLLCFGR PLLM LL_RCC_PLLSAI1_ConfigDomain_SAI\n
+ * PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_SAI\n
+ * PLLSAI1CFGR PLLSAI1PDIV LL_RCC_PLLSAI1_ConfigDomain_SAI
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param PLLN Between 8 and 86
+ * @param PLLP This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_3
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_5
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_8
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_9
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_10
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_11
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_12
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_13
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_14
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_15
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_16
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_17
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_18
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_19
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_20
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_21
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_22
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_23
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_24
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_25
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_26
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_27
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_28
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_29
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_30
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_31
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
+ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1PDIV,
+ PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLP);
+}
+#else
+/**
+ * @brief Configure PLLSAI1 used for SAI domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLSAI1 and PLLSAI2 (*) are disabled.
+ * @note PLLSAI1N/PLLSAI1P can be written only when PLLSAI1 is disabled.
+ * @note This can be selected for SAI1 or SAI2 (*)
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_SAI\n
+ * PLLCFGR PLLM LL_RCC_PLLSAI1_ConfigDomain_SAI\n
+ * PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_SAI\n
+ * PLLSAI1CFGR PLLSAI1P LL_RCC_PLLSAI1_ConfigDomain_SAI
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param PLLN Between 8 and 86
+ * @param PLLP This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_17
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
+ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1P, PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLP);
+}
+#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT && RCC_PLLSAI1P_DIV_2_31_SUPPORT */
+
+#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
+/**
+ * @brief Configure PLLSAI1 used for ADC domain clock
+ * @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled.
+ * @note PLLSAI1M/PLLSAI1N/PLLSAI1R can be written only when PLLSAI1 is disabled.
+ * @note This can be selected for ADC
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_ADC\n
+ * PLLSAI1CFGR PLLSAI1M LL_RCC_PLLSAI1_ConfigDomain_ADC\n
+ * PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_ADC\n
+ * PLLSAI1CFGR PLLSAI1R LL_RCC_PLLSAI1_ConfigDomain_ADC
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_1
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_3
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_5
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_8
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_9
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_10
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_11
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_12
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_13
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_14
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_15
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_16
+ * @param PLLN Between 8 and 86
+ * @param PLLR This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_ADC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source);
+ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M | RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1R,
+ PLLM | PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLR);
+}
+#else
+/**
+ * @brief Configure PLLSAI1 used for ADC domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLSAI1 and PLLSAI2 (*) are disabled.
+ * @note PLLN/PLLR can be written only when PLLSAI1 is disabled.
+ * @note This can be selected for ADC
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI1_ConfigDomain_ADC\n
+ * PLLCFGR PLLM LL_RCC_PLLSAI1_ConfigDomain_ADC\n
+ * PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_ConfigDomain_ADC\n
+ * PLLSAI1CFGR PLLSAI1R LL_RCC_PLLSAI1_ConfigDomain_ADC
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param PLLN Between 8 and 86
+ * @param PLLR This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_ConfigDomain_ADC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
+ MODIFY_REG(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N | RCC_PLLSAI1CFGR_PLLSAI1R, PLLN << RCC_PLLSAI1CFGR_PLLSAI1N_Pos | PLLR);
+}
+#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
+
+/**
+ * @brief Get SAI1PLL multiplication factor for VCO
+ * @rmtoll PLLSAI1CFGR PLLSAI1N LL_RCC_PLLSAI1_GetN
+ * @retval Between 8 and 86
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetN(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1N) >> RCC_PLLSAI1CFGR_PLLSAI1N_Pos);
+}
+
+#if defined(RCC_PLLSAI1P_DIV_2_31_SUPPORT)
+/**
+ * @brief Get SAI1PLL division factor for PLLSAI1P
+ * @note Used for PLLSAI1CLK (SAI1 or SAI2 (*) clock).
+ * @rmtoll PLLSAI1CFGR PLLSAI1PDIV LL_RCC_PLLSAI1_GetP
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_3
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_5
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_8
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_9
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_10
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_11
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_12
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_13
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_14
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_15
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_16
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_17
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_18
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_19
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_20
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_21
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_22
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_23
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_24
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_25
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_26
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_27
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_28
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_29
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_30
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_31
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetP(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PDIV));
+}
+#else
+/**
+ * @brief Get SAI1PLL division factor for PLLSAI1P
+ * @note Used for PLLSAI1CLK (SAI1 or SAI2 (*) clock).
+ * @rmtoll PLLSAI1CFGR PLLSAI1P LL_RCC_PLLSAI1_GetP
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1P_DIV_17
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetP(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1P));
+}
+#endif /* RCC_PLLSAI1P_DIV_2_31_SUPPORT */
+
+/**
+ * @brief Get SAI1PLL division factor for PLLSAI1Q
+ * @note Used PLL48M2CLK selected for USB, RNG, SDMMC (48 MHz clock)
+ * @rmtoll PLLSAI1CFGR PLLSAI1Q LL_RCC_PLLSAI1_GetQ
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1Q_DIV_8
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetQ(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1Q));
+}
+
+/**
+ * @brief Get PLLSAI1 division factor for PLLSAIR
+ * @note Used for PLLADC1CLK (ADC clock)
+ * @rmtoll PLLSAI1CFGR PLLSAI1R LL_RCC_PLLSAI1_GetR
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1R_DIV_8
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetR(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1R));
+}
+
+#if defined(RCC_PLLSAI1M_DIV_1_16_SUPPORT)
+/**
+ * @brief Get Division factor for the PLLSAI1
+ * @rmtoll PLLSAI1CFGR PLLSAI1M LL_RCC_PLLSAI1_GetDivider
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_1
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_2
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_3
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_4
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_5
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_6
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_7
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_8
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_9
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_10
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_11
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_12
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_13
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_14
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_15
+ * @arg @ref LL_RCC_PLLSAI1M_DIV_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI1_GetDivider(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1M));
+}
+#endif /* RCC_PLLSAI1M_DIV_1_16_SUPPORT */
+
+/**
+ * @brief Enable PLLSAI1 output mapped on SAI domain clock
+ * @rmtoll PLLSAI1CFGR PLLSAI1PEN LL_RCC_PLLSAI1_EnableDomain_SAI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_EnableDomain_SAI(void)
+{
+ SET_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PEN);
+}
+
+/**
+ * @brief Disable PLLSAI1 output mapped on SAI domain clock
+ * @note In order to save power, when of the PLLSAI1 is
+ * not used, should be 0
+ * @rmtoll PLLSAI1CFGR PLLSAI1PEN LL_RCC_PLLSAI1_DisableDomain_SAI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_DisableDomain_SAI(void)
+{
+ CLEAR_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1PEN);
+}
+
+/**
+ * @brief Enable PLLSAI1 output mapped on 48MHz domain clock
+ * @rmtoll PLLSAI1CFGR PLLSAI1QEN LL_RCC_PLLSAI1_EnableDomain_48M
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_EnableDomain_48M(void)
+{
+ SET_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN);
+}
+
+/**
+ * @brief Disable PLLSAI1 output mapped on 48MHz domain clock
+ * @note In order to save power, when of the PLLSAI1 is
+ * not used, should be 0
+ * @rmtoll PLLSAI1CFGR PLLSAI1QEN LL_RCC_PLLSAI1_DisableDomain_48M
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_DisableDomain_48M(void)
+{
+ CLEAR_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1QEN);
+}
+
+/**
+ * @brief Enable PLLSAI1 output mapped on ADC domain clock
+ * @rmtoll PLLSAI1CFGR PLLSAI1REN LL_RCC_PLLSAI1_EnableDomain_ADC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_EnableDomain_ADC(void)
+{
+ SET_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1REN);
+}
+
+/**
+ * @brief Disable PLLSAI1 output mapped on ADC domain clock
+ * @note In order to save power, when of the PLLSAI1 is
+ * not used, Main PLLSAI1 should be 0
+ * @rmtoll PLLSAI1CFGR PLLSAI1REN LL_RCC_PLLSAI1_DisableDomain_ADC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI1_DisableDomain_ADC(void)
+{
+ CLEAR_BIT(RCC->PLLSAI1CFGR, RCC_PLLSAI1CFGR_PLLSAI1REN);
+}
+
+/**
+ * @}
+ */
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+/** @defgroup RCC_LL_EF_PLLSAI2 PLLSAI2
+ * @{
+ */
+
+/**
+ * @brief Enable PLLSAI2
+ * @rmtoll CR PLLSAI2ON LL_RCC_PLLSAI2_Enable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_Enable(void)
+{
+ SET_BIT(RCC->CR, RCC_CR_PLLSAI2ON);
+}
+
+/**
+ * @brief Disable PLLSAI2
+ * @rmtoll CR PLLSAI2ON LL_RCC_PLLSAI2_Disable
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_Disable(void)
+{
+ CLEAR_BIT(RCC->CR, RCC_CR_PLLSAI2ON);
+}
+
+/**
+ * @brief Check if PLLSAI2 Ready
+ * @rmtoll CR PLLSAI2RDY LL_RCC_PLLSAI2_IsReady
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_IsReady(void)
+{
+ return (READ_BIT(RCC->CR, RCC_CR_PLLSAI2RDY) == (RCC_CR_PLLSAI2RDY));
+}
+
+#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT) && defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
+/**
+ * @brief Configure PLLSAI2 used for SAI domain clock
+ * @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled.
+ * @note PLLSAI2M/PLLSAI2N/PLLSAI2PDIV can be written only when PLLSAI2 is disabled.
+ * @note This can be selected for SAI1 or SAI2
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_SAI\n
+ * PLLSAI2CFGR PLLSAI2M LL_RCC_PLLSAI2_ConfigDomain_SAI\n
+ * PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_SAI\n
+ * PLLSAI2CFGR PLLSAI2PDIV LL_RCC_PLLSAI2_ConfigDomain_SAI
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_1
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_3
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_5
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_9
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_10
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_11
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_12
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_13
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_14
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_15
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_16
+ * @param PLLN Between 8 and 86
+ * @param PLLP This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_3
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_5
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_9
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_10
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_11
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_12
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_13
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_14
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_15
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_16
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_17
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_18
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_19
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_20
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_21
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_22
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_23
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_24
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_25
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_26
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_27
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_28
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_29
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_30
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_31
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source);
+ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2PDIV,
+ PLLM | PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLP);
+}
+#elif defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
+/**
+ * @brief Configure PLLSAI2 used for SAI domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLSAI1 and PLLSAI2 are disabled.
+ * @note PLLSAI2N/PLLSAI2PDIV can be written only when PLLSAI2 is disabled.
+ * @note This can be selected for SAI1 or SAI2
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_SAI\n
+ * PLLCFGR PLLM LL_RCC_PLLSAI2_ConfigDomain_SAI\n
+ * PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_SAI\n
+ * PLLSAI2CFGR PLLSAI2PDIV LL_RCC_PLLSAI2_ConfigDomain_SAI
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param PLLN Between 8 and 86
+ * @param PLLP This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_3
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_5
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_9
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_10
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_11
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_12
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_13
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_14
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_15
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_16
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_17
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_18
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_19
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_20
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_21
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_22
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_23
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_24
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_25
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_26
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_27
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_28
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_29
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_30
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_31
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
+ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2PDIV, PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLP);
+}
+#else
+/**
+ * @brief Configure PLLSAI2 used for SAI domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLSAI2 and PLLSAI2 are disabled.
+ * @note PLLSAI2N/PLLSAI2P can be written only when PLLSAI2 is disabled.
+ * @note This can be selected for SAI1 or SAI2
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_SAI\n
+ * PLLCFGR PLLM LL_RCC_PLLSAI2_ConfigDomain_SAI\n
+ * PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_SAI\n
+ * PLLSAI2CFGR PLLSAI2P LL_RCC_PLLSAI2_ConfigDomain_SAI
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param PLLN Between 8 and 86
+ * @param PLLP This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_17
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_SAI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLP)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
+ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2P, PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLP);
+}
+#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT && RCC_PLLSAI2P_DIV_2_31_SUPPORT */
+
+#if defined(DSI)
+/**
+ * @brief Configure PLLSAI2 used for DSI domain clock
+ * @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled.
+ * @note PLLSAI2M/PLLSAI2N/PLLSAI2Q can be written only when PLLSAI2 is disabled.
+ * @note This can be selected for DSI
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_DSI\n
+ * PLLSAI2CFGR PLLSAI2M LL_RCC_PLLSAI2_ConfigDomain_DSI\n
+ * PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_DSI\n
+ * PLLSAI2CFGR PLLSAI2Q LL_RCC_PLLSAI2_ConfigDomain_DSI
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_1
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_3
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_5
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_9
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_10
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_11
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_12
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_13
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_14
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_15
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_16
+ * @param PLLN Between 8 and 86
+ * @param PLLQ This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2Q_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2Q_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2Q_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2Q_DIV_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_DSI(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLQ)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source);
+ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2Q, PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLQ | PLLM);
+}
+#endif /* DSI */
+
+#if defined(LTDC)
+/**
+ * @brief Configure PLLSAI2 used for LTDC domain clock
+ * @note PLL Source can be written only when PLL, PLLSAI1 and PLLSAI2 (*) are disabled.
+ * @note PLLSAI2M/PLLSAI2N/PLLSAI2R can be written only when PLLSAI2 is disabled.
+ * @note This can be selected for LTDC
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_LTDC\n
+ * PLLSAI2CFGR PLLSAI2M LL_RCC_PLLSAI2_ConfigDomain_LTDC\n
+ * PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_LTDC\n
+ * PLLSAI2CFGR PLLSAI2R LL_RCC_PLLSAI2_ConfigDomain_LTDC\n
+ * CCIPR2 PLLSAI2DIVR LL_RCC_PLLSAI2_ConfigDomain_LTDC
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_1
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_3
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_5
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_9
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_10
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_11
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_12
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_13
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_14
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_15
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_16
+ * @param PLLN Between 8 and 86
+ * @param PLLR This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_8
+ * @param PLLDIVR This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_16
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_LTDC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR, uint32_t PLLDIVR)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, Source);
+ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M | RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2R, PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLR | PLLM);
+ MODIFY_REG(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR, PLLDIVR);
+}
+#else
+/**
+ * @brief Configure PLLSAI2 used for ADC domain clock
+ * @note PLL Source and PLLM Divider can be written only when PLL,
+ * PLLSAI2 and PLLSAI2 are disabled.
+ * @note PLLSAI2N/PLLSAI2R can be written only when PLLSAI2 is disabled.
+ * @note This can be selected for ADC
+ * @rmtoll PLLCFGR PLLSRC LL_RCC_PLLSAI2_ConfigDomain_ADC\n
+ * PLLCFGR PLLM LL_RCC_PLLSAI2_ConfigDomain_ADC\n
+ * PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_ConfigDomain_ADC\n
+ * PLLSAI2CFGR PLLSAI2R LL_RCC_PLLSAI2_ConfigDomain_ADC
+ * @param Source This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSOURCE_NONE
+ * @arg @ref LL_RCC_PLLSOURCE_MSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSI
+ * @arg @ref LL_RCC_PLLSOURCE_HSE
+ * @param PLLM This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLM_DIV_1
+ * @arg @ref LL_RCC_PLLM_DIV_2
+ * @arg @ref LL_RCC_PLLM_DIV_3
+ * @arg @ref LL_RCC_PLLM_DIV_4
+ * @arg @ref LL_RCC_PLLM_DIV_5
+ * @arg @ref LL_RCC_PLLM_DIV_6
+ * @arg @ref LL_RCC_PLLM_DIV_7
+ * @arg @ref LL_RCC_PLLM_DIV_8
+ * @param PLLN Between 8 and 86
+ * @param PLLR This parameter can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_8
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_ConfigDomain_ADC(uint32_t Source, uint32_t PLLM, uint32_t PLLN, uint32_t PLLR)
+{
+ MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC | RCC_PLLCFGR_PLLM, Source | PLLM);
+ MODIFY_REG(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N | RCC_PLLSAI2CFGR_PLLSAI2R, PLLN << RCC_PLLSAI2CFGR_PLLSAI2N_Pos | PLLR);
+}
+#endif /* LTDC */
+
+/**
+ * @brief Get SAI2PLL multiplication factor for VCO
+ * @rmtoll PLLSAI2CFGR PLLSAI2N LL_RCC_PLLSAI2_GetN
+ * @retval Between 8 and 86
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetN(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2N) >> RCC_PLLSAI2CFGR_PLLSAI2N_Pos);
+}
+
+#if defined(RCC_PLLSAI2P_DIV_2_31_SUPPORT)
+/**
+ * @brief Get SAI2PLL division factor for PLLSAI2P
+ * @note Used for PLLSAI2CLK (SAI1 or SAI2 clock).
+ * @rmtoll PLLSAI2CFGR PLLSAI2PDIV LL_RCC_PLLSAI2_GetP
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_3
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_5
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_9
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_10
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_11
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_12
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_13
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_14
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_15
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_16
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_17
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_18
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_19
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_20
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_21
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_22
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_23
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_24
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_25
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_26
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_27
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_28
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_29
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_30
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_31
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetP(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2PDIV));
+}
+#else
+/**
+ * @brief Get SAI2PLL division factor for PLLSAI2P
+ * @note Used for PLLSAI2CLK (SAI1 or SAI2 clock).
+ * @rmtoll PLLSAI2CFGR PLLSAI2P LL_RCC_PLLSAI2_GetP
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2P_DIV_17
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetP(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2P));
+}
+#endif /* RCC_PLLSAI2P_DIV_2_31_SUPPORT */
+
+#if defined(RCC_PLLSAI2Q_DIV_SUPPORT)
+/**
+ * @brief Get division factor for PLLSAI2Q
+ * @note Used for PLLDSICLK (DSI clock)
+ * @rmtoll PLLSAI2CFGR PLLSAI2Q LL_RCC_PLLSAI2_GetQ
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2Q_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2Q_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2Q_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2Q_DIV_8
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetQ(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2Q));
+}
+#endif /* RCC_PLLSAI2Q_DIV_SUPPORT */
+
+/**
+ * @brief Get SAI2PLL division factor for PLLSAI2R
+ * @note Used for PLLADC2CLK (ADC clock) or PLLLCDCLK (LTDC clock) depending on devices
+ * @rmtoll PLLSAI2CFGR PLLSAI2R LL_RCC_PLLSAI2_GetR
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2R_DIV_8
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetR(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2R));
+}
+
+#if defined(RCC_PLLSAI2M_DIV_1_16_SUPPORT)
+/**
+ * @brief Get Division factor for the PLLSAI2
+ * @rmtoll PLLSAI2CFGR PLLSAI2M LL_RCC_PLLSAI2_GetDivider
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_1
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_3
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_5
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_6
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_7
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_9
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_10
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_11
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_12
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_13
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_14
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_15
+ * @arg @ref LL_RCC_PLLSAI2M_DIV_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetDivider(void)
+{
+ return (uint32_t)(READ_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2M));
+}
+#endif /* RCC_PLLSAI2M_DIV_1_16_SUPPORT */
+
+#if defined(RCC_CCIPR2_PLLSAI2DIVR)
+/**
+ * @brief Get PLLSAI2 division factor for PLLSAI2DIVR
+ * @note Used for LTDC domain clock
+ * @rmtoll CCIPR2 PLLSAI2DIVR LL_RCC_PLLSAI2_GetDIVR
+ * @retval Returned value can be one of the following values:
+ * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_2
+ * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_4
+ * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_8
+ * @arg @ref LL_RCC_PLLSAI2DIVR_DIV_16
+ */
+__STATIC_INLINE uint32_t LL_RCC_PLLSAI2_GetDIVR(void)
+{
+ return (uint32_t)(READ_BIT(RCC->CCIPR2, RCC_CCIPR2_PLLSAI2DIVR));
+}
+#endif /* RCC_CCIPR2_PLLSAI2DIVR */
+
+/**
+ * @brief Enable PLLSAI2 output mapped on SAI domain clock
+ * @rmtoll PLLSAI2CFGR PLLSAI2PEN LL_RCC_PLLSAI2_EnableDomain_SAI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_EnableDomain_SAI(void)
+{
+ SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2PEN);
+}
+
+/**
+ * @brief Disable PLLSAI2 output mapped on SAI domain clock
+ * @note In order to save power, when of the PLLSAI2 is
+ * not used, should be 0
+ * @rmtoll PLLSAI2CFGR PLLSAI2PEN LL_RCC_PLLSAI2_DisableDomain_SAI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_DisableDomain_SAI(void)
+{
+ CLEAR_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2PEN);
+}
+
+#if defined(DSI)
+/**
+ * @brief Enable PLLSAI2 output mapped on DSI domain clock
+ * @rmtoll PLLSAI2CFGR PLLSAI2QEN LL_RCC_PLLSAI2_EnableDomain_DSI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_EnableDomain_DSI(void)
+{
+ SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2QEN);
+}
+
+/**
+ * @brief Disable PLLSAI2 output mapped on DSI domain clock
+ * @note In order to save power, when of the PLLSAI2 is
+ * not used, Main PLLSAI2 should be 0
+ * @rmtoll PLLSAI2CFGR PLLSAI2QEN LL_RCC_PLLSAI2_DisableDomain_DSI
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_DisableDomain_DSI(void)
+{
+ CLEAR_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2QEN);
+}
+#endif /* DSI */
+
+#if defined(LTDC)
+/**
+ * @brief Enable PLLSAI2 output mapped on LTDC domain clock
+ * @rmtoll PLLSAI2CFGR PLLSAI2REN LL_RCC_PLLSAI2_EnableDomain_LTDC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_EnableDomain_LTDC(void)
+{
+ SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2REN);
+}
+
+/**
+ * @brief Disable PLLSAI2 output mapped on LTDC domain clock
+ * @note In order to save power, when of the PLLSAI2 is
+ * not used, Main PLLSAI2 should be 0
+ * @rmtoll PLLSAI2CFGR PLLSAI2REN LL_RCC_PLLSAI2_DisableDomain_LTDC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_DisableDomain_LTDC(void)
+{
+ CLEAR_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2REN);
+}
+#else
+/**
+ * @brief Enable PLLSAI2 output mapped on ADC domain clock
+ * @rmtoll PLLSAI2CFGR PLLSAI2REN LL_RCC_PLLSAI2_EnableDomain_ADC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_EnableDomain_ADC(void)
+{
+ SET_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2REN);
+}
+
+/**
+ * @brief Disable PLLSAI2 output mapped on ADC domain clock
+ * @note In order to save power, when of the PLLSAI2 is
+ * not used, Main PLLSAI2 should be 0
+ * @rmtoll PLLSAI2CFGR PLLSAI2REN LL_RCC_PLLSAI2_DisableDomain_ADC
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_PLLSAI2_DisableDomain_ADC(void)
+{
+ CLEAR_BIT(RCC->PLLSAI2CFGR, RCC_PLLSAI2CFGR_PLLSAI2REN);
+}
+#endif /* LTDC */
+
+/**
+ * @}
+ */
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+
+
+/** @defgroup RCC_LL_EF_FLAG_Management FLAG Management
+ * @{
+ */
+
+/**
+ * @brief Clear LSI ready interrupt flag
+ * @rmtoll CICR LSIRDYC LL_RCC_ClearFlag_LSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_LSIRDY(void)
+{
+ SET_BIT(RCC->CICR, RCC_CICR_LSIRDYC);
+}
+
+/**
+ * @brief Clear LSE ready interrupt flag
+ * @rmtoll CICR LSERDYC LL_RCC_ClearFlag_LSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_LSERDY(void)
+{
+ SET_BIT(RCC->CICR, RCC_CICR_LSERDYC);
+}
+
+/**
+ * @brief Clear MSI ready interrupt flag
+ * @rmtoll CICR MSIRDYC LL_RCC_ClearFlag_MSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_MSIRDY(void)
+{
+ SET_BIT(RCC->CICR, RCC_CICR_MSIRDYC);
+}
+
+/**
+ * @brief Clear HSI ready interrupt flag
+ * @rmtoll CICR HSIRDYC LL_RCC_ClearFlag_HSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSIRDY(void)
+{
+ SET_BIT(RCC->CICR, RCC_CICR_HSIRDYC);
+}
+
+/**
+ * @brief Clear HSE ready interrupt flag
+ * @rmtoll CICR HSERDYC LL_RCC_ClearFlag_HSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSERDY(void)
+{
+ SET_BIT(RCC->CICR, RCC_CICR_HSERDYC);
+}
+
+/**
+ * @brief Clear PLL ready interrupt flag
+ * @rmtoll CICR PLLRDYC LL_RCC_ClearFlag_PLLRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_PLLRDY(void)
+{
+ SET_BIT(RCC->CICR, RCC_CICR_PLLRDYC);
+}
+
+#if defined(RCC_HSI48_SUPPORT)
+/**
+ * @brief Clear HSI48 ready interrupt flag
+ * @rmtoll CICR HSI48RDYC LL_RCC_ClearFlag_HSI48RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSI48RDY(void)
+{
+ SET_BIT(RCC->CICR, RCC_CICR_HSI48RDYC);
+}
+#endif /* RCC_HSI48_SUPPORT */
+
+/**
+ * @brief Clear PLLSAI1 ready interrupt flag
+ * @rmtoll CICR PLLSAI1RDYC LL_RCC_ClearFlag_PLLSAI1RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_PLLSAI1RDY(void)
+{
+ SET_BIT(RCC->CICR, RCC_CICR_PLLSAI1RDYC);
+}
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+/**
+ * @brief Clear PLLSAI1 ready interrupt flag
+ * @rmtoll CICR PLLSAI2RDYC LL_RCC_ClearFlag_PLLSAI2RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_PLLSAI2RDY(void)
+{
+ SET_BIT(RCC->CICR, RCC_CICR_PLLSAI2RDYC);
+}
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+/**
+ * @brief Clear Clock security system interrupt flag
+ * @rmtoll CICR CSSC LL_RCC_ClearFlag_HSECSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_HSECSS(void)
+{
+ SET_BIT(RCC->CICR, RCC_CICR_CSSC);
+}
+
+/**
+ * @brief Clear LSE Clock security system interrupt flag
+ * @rmtoll CICR LSECSSC LL_RCC_ClearFlag_LSECSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearFlag_LSECSS(void)
+{
+ SET_BIT(RCC->CICR, RCC_CICR_LSECSSC);
+}
+
+/**
+ * @brief Check if LSI ready interrupt occurred or not
+ * @rmtoll CIFR LSIRDYF LL_RCC_IsActiveFlag_LSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSIRDY(void)
+{
+ return (READ_BIT(RCC->CIFR, RCC_CIFR_LSIRDYF) == (RCC_CIFR_LSIRDYF));
+}
+
+/**
+ * @brief Check if LSE ready interrupt occurred or not
+ * @rmtoll CIFR LSERDYF LL_RCC_IsActiveFlag_LSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSERDY(void)
+{
+ return (READ_BIT(RCC->CIFR, RCC_CIFR_LSERDYF) == (RCC_CIFR_LSERDYF));
+}
+
+/**
+ * @brief Check if MSI ready interrupt occurred or not
+ * @rmtoll CIFR MSIRDYF LL_RCC_IsActiveFlag_MSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_MSIRDY(void)
+{
+ return (READ_BIT(RCC->CIFR, RCC_CIFR_MSIRDYF) == (RCC_CIFR_MSIRDYF));
+}
+
+/**
+ * @brief Check if HSI ready interrupt occurred or not
+ * @rmtoll CIFR HSIRDYF LL_RCC_IsActiveFlag_HSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSIRDY(void)
+{
+ return (READ_BIT(RCC->CIFR, RCC_CIFR_HSIRDYF) == (RCC_CIFR_HSIRDYF));
+}
+
+/**
+ * @brief Check if HSE ready interrupt occurred or not
+ * @rmtoll CIFR HSERDYF LL_RCC_IsActiveFlag_HSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSERDY(void)
+{
+ return (READ_BIT(RCC->CIFR, RCC_CIFR_HSERDYF) == (RCC_CIFR_HSERDYF));
+}
+
+/**
+ * @brief Check if PLL ready interrupt occurred or not
+ * @rmtoll CIFR PLLRDYF LL_RCC_IsActiveFlag_PLLRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLRDY(void)
+{
+ return (READ_BIT(RCC->CIFR, RCC_CIFR_PLLRDYF) == (RCC_CIFR_PLLRDYF));
+}
+
+#if defined(RCC_HSI48_SUPPORT)
+/**
+ * @brief Check if HSI48 ready interrupt occurred or not
+ * @rmtoll CIR HSI48RDYF LL_RCC_IsActiveFlag_HSI48RDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSI48RDY(void)
+{
+ return (READ_BIT(RCC->CIFR, RCC_CIFR_HSI48RDYF) == (RCC_CIFR_HSI48RDYF));
+}
+#endif /* RCC_HSI48_SUPPORT */
+
+/**
+ * @brief Check if PLLSAI1 ready interrupt occurred or not
+ * @rmtoll CIFR PLLSAI1RDYF LL_RCC_IsActiveFlag_PLLSAI1RDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLSAI1RDY(void)
+{
+ return (READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI1RDYF) == (RCC_CIFR_PLLSAI1RDYF));
+}
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+/**
+ * @brief Check if PLLSAI1 ready interrupt occurred or not
+ * @rmtoll CIFR PLLSAI2RDYF LL_RCC_IsActiveFlag_PLLSAI2RDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PLLSAI2RDY(void)
+{
+ return (READ_BIT(RCC->CIFR, RCC_CIFR_PLLSAI2RDYF) == (RCC_CIFR_PLLSAI2RDYF));
+}
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+/**
+ * @brief Check if Clock security system interrupt occurred or not
+ * @rmtoll CIFR CSSF LL_RCC_IsActiveFlag_HSECSS
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_HSECSS(void)
+{
+ return (READ_BIT(RCC->CIFR, RCC_CIFR_CSSF) == (RCC_CIFR_CSSF));
+}
+
+/**
+ * @brief Check if LSE Clock security system interrupt occurred or not
+ * @rmtoll CIFR LSECSSF LL_RCC_IsActiveFlag_LSECSS
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LSECSS(void)
+{
+ return (READ_BIT(RCC->CIFR, RCC_CIFR_LSECSSF) == (RCC_CIFR_LSECSSF));
+}
+
+/**
+ * @brief Check if RCC flag FW reset is set or not.
+ * @rmtoll CSR FWRSTF LL_RCC_IsActiveFlag_FWRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_FWRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_FWRSTF) == (RCC_CSR_FWRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Independent Watchdog reset is set or not.
+ * @rmtoll CSR IWDGRSTF LL_RCC_IsActiveFlag_IWDGRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_IWDGRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_IWDGRSTF) == (RCC_CSR_IWDGRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Low Power reset is set or not.
+ * @rmtoll CSR LPWRRSTF LL_RCC_IsActiveFlag_LPWRRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_LPWRRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_LPWRRSTF) == (RCC_CSR_LPWRRSTF));
+}
+
+/**
+ * @brief Check if RCC flag is set or not.
+ * @rmtoll CSR OBLRSTF LL_RCC_IsActiveFlag_OBLRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_OBLRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_OBLRSTF) == (RCC_CSR_OBLRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Pin reset is set or not.
+ * @rmtoll CSR PINRSTF LL_RCC_IsActiveFlag_PINRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_PINRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_PINRSTF) == (RCC_CSR_PINRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Software reset is set or not.
+ * @rmtoll CSR SFTRSTF LL_RCC_IsActiveFlag_SFTRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_SFTRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_SFTRSTF) == (RCC_CSR_SFTRSTF));
+}
+
+/**
+ * @brief Check if RCC flag Window Watchdog reset is set or not.
+ * @rmtoll CSR WWDGRSTF LL_RCC_IsActiveFlag_WWDGRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_WWDGRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_WWDGRSTF) == (RCC_CSR_WWDGRSTF));
+}
+
+/**
+ * @brief Check if RCC flag BOR reset is set or not.
+ * @rmtoll CSR BORRSTF LL_RCC_IsActiveFlag_BORRST
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsActiveFlag_BORRST(void)
+{
+ return (READ_BIT(RCC->CSR, RCC_CSR_BORRSTF) == (RCC_CSR_BORRSTF));
+}
+
+/**
+ * @brief Set RMVF bit to clear the reset flags.
+ * @rmtoll CSR RMVF LL_RCC_ClearResetFlags
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_ClearResetFlags(void)
+{
+ SET_BIT(RCC->CSR, RCC_CSR_RMVF);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_IT_Management IT Management
+ * @{
+ */
+
+/**
+ * @brief Enable LSI ready interrupt
+ * @rmtoll CIER LSIRDYIE LL_RCC_EnableIT_LSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_LSIRDY(void)
+{
+ SET_BIT(RCC->CIER, RCC_CIER_LSIRDYIE);
+}
+
+/**
+ * @brief Enable LSE ready interrupt
+ * @rmtoll CIER LSERDYIE LL_RCC_EnableIT_LSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_LSERDY(void)
+{
+ SET_BIT(RCC->CIER, RCC_CIER_LSERDYIE);
+}
+
+/**
+ * @brief Enable MSI ready interrupt
+ * @rmtoll CIER MSIRDYIE LL_RCC_EnableIT_MSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_MSIRDY(void)
+{
+ SET_BIT(RCC->CIER, RCC_CIER_MSIRDYIE);
+}
+
+/**
+ * @brief Enable HSI ready interrupt
+ * @rmtoll CIER HSIRDYIE LL_RCC_EnableIT_HSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_HSIRDY(void)
+{
+ SET_BIT(RCC->CIER, RCC_CIER_HSIRDYIE);
+}
+
+/**
+ * @brief Enable HSE ready interrupt
+ * @rmtoll CIER HSERDYIE LL_RCC_EnableIT_HSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_HSERDY(void)
+{
+ SET_BIT(RCC->CIER, RCC_CIER_HSERDYIE);
+}
+
+/**
+ * @brief Enable PLL ready interrupt
+ * @rmtoll CIER PLLRDYIE LL_RCC_EnableIT_PLLRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_PLLRDY(void)
+{
+ SET_BIT(RCC->CIER, RCC_CIER_PLLRDYIE);
+}
+
+#if defined(RCC_HSI48_SUPPORT)
+/**
+ * @brief Enable HSI48 ready interrupt
+ * @rmtoll CIER HSI48RDYIE LL_RCC_EnableIT_HSI48RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_HSI48RDY(void)
+{
+ SET_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE);
+}
+#endif /* RCC_HSI48_SUPPORT */
+
+/**
+ * @brief Enable PLLSAI1 ready interrupt
+ * @rmtoll CIER PLLSAI1RDYIE LL_RCC_EnableIT_PLLSAI1RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_PLLSAI1RDY(void)
+{
+ SET_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE);
+}
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+/**
+ * @brief Enable PLLSAI2 ready interrupt
+ * @rmtoll CIER PLLSAI2RDYIE LL_RCC_EnableIT_PLLSAI2RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_PLLSAI2RDY(void)
+{
+ SET_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE);
+}
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+/**
+ * @brief Enable LSE clock security system interrupt
+ * @rmtoll CIER LSECSSIE LL_RCC_EnableIT_LSECSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_EnableIT_LSECSS(void)
+{
+ SET_BIT(RCC->CIER, RCC_CIER_LSECSSIE);
+}
+
+/**
+ * @brief Disable LSI ready interrupt
+ * @rmtoll CIER LSIRDYIE LL_RCC_DisableIT_LSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_LSIRDY(void)
+{
+ CLEAR_BIT(RCC->CIER, RCC_CIER_LSIRDYIE);
+}
+
+/**
+ * @brief Disable LSE ready interrupt
+ * @rmtoll CIER LSERDYIE LL_RCC_DisableIT_LSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_LSERDY(void)
+{
+ CLEAR_BIT(RCC->CIER, RCC_CIER_LSERDYIE);
+}
+
+/**
+ * @brief Disable MSI ready interrupt
+ * @rmtoll CIER MSIRDYIE LL_RCC_DisableIT_MSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_MSIRDY(void)
+{
+ CLEAR_BIT(RCC->CIER, RCC_CIER_MSIRDYIE);
+}
+
+/**
+ * @brief Disable HSI ready interrupt
+ * @rmtoll CIER HSIRDYIE LL_RCC_DisableIT_HSIRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_HSIRDY(void)
+{
+ CLEAR_BIT(RCC->CIER, RCC_CIER_HSIRDYIE);
+}
+
+/**
+ * @brief Disable HSE ready interrupt
+ * @rmtoll CIER HSERDYIE LL_RCC_DisableIT_HSERDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_HSERDY(void)
+{
+ CLEAR_BIT(RCC->CIER, RCC_CIER_HSERDYIE);
+}
+
+/**
+ * @brief Disable PLL ready interrupt
+ * @rmtoll CIER PLLRDYIE LL_RCC_DisableIT_PLLRDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_PLLRDY(void)
+{
+ CLEAR_BIT(RCC->CIER, RCC_CIER_PLLRDYIE);
+}
+
+#if defined(RCC_HSI48_SUPPORT)
+/**
+ * @brief Disable HSI48 ready interrupt
+ * @rmtoll CIER HSI48RDYIE LL_RCC_DisableIT_HSI48RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_HSI48RDY(void)
+{
+ CLEAR_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE);
+}
+#endif /* RCC_HSI48_SUPPORT */
+
+/**
+ * @brief Disable PLLSAI1 ready interrupt
+ * @rmtoll CIER PLLSAI1RDYIE LL_RCC_DisableIT_PLLSAI1RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_PLLSAI1RDY(void)
+{
+ CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE);
+}
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+/**
+ * @brief Disable PLLSAI2 ready interrupt
+ * @rmtoll CIER PLLSAI2RDYIE LL_RCC_DisableIT_PLLSAI2RDY
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_PLLSAI2RDY(void)
+{
+ CLEAR_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE);
+}
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+/**
+ * @brief Disable LSE clock security system interrupt
+ * @rmtoll CIER LSECSSIE LL_RCC_DisableIT_LSECSS
+ * @retval None
+ */
+__STATIC_INLINE void LL_RCC_DisableIT_LSECSS(void)
+{
+ CLEAR_BIT(RCC->CIER, RCC_CIER_LSECSSIE);
+}
+
+/**
+ * @brief Checks if LSI ready interrupt source is enabled or disabled.
+ * @rmtoll CIER LSIRDYIE LL_RCC_IsEnabledIT_LSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSIRDY(void)
+{
+ return (READ_BIT(RCC->CIER, RCC_CIER_LSIRDYIE) == (RCC_CIER_LSIRDYIE));
+}
+
+/**
+ * @brief Checks if LSE ready interrupt source is enabled or disabled.
+ * @rmtoll CIER LSERDYIE LL_RCC_IsEnabledIT_LSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSERDY(void)
+{
+ return (READ_BIT(RCC->CIER, RCC_CIER_LSERDYIE) == (RCC_CIER_LSERDYIE));
+}
+
+/**
+ * @brief Checks if MSI ready interrupt source is enabled or disabled.
+ * @rmtoll CIER MSIRDYIE LL_RCC_IsEnabledIT_MSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_MSIRDY(void)
+{
+ return (READ_BIT(RCC->CIER, RCC_CIER_MSIRDYIE) == (RCC_CIER_MSIRDYIE));
+}
+
+/**
+ * @brief Checks if HSI ready interrupt source is enabled or disabled.
+ * @rmtoll CIER HSIRDYIE LL_RCC_IsEnabledIT_HSIRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSIRDY(void)
+{
+ return (READ_BIT(RCC->CIER, RCC_CIER_HSIRDYIE) == (RCC_CIER_HSIRDYIE));
+}
+
+/**
+ * @brief Checks if HSE ready interrupt source is enabled or disabled.
+ * @rmtoll CIER HSERDYIE LL_RCC_IsEnabledIT_HSERDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSERDY(void)
+{
+ return (READ_BIT(RCC->CIER, RCC_CIER_HSERDYIE) == (RCC_CIER_HSERDYIE));
+}
+
+/**
+ * @brief Checks if PLL ready interrupt source is enabled or disabled.
+ * @rmtoll CIER PLLRDYIE LL_RCC_IsEnabledIT_PLLRDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLRDY(void)
+{
+ return (READ_BIT(RCC->CIER, RCC_CIER_PLLRDYIE) == (RCC_CIER_PLLRDYIE));
+}
+
+#if defined(RCC_HSI48_SUPPORT)
+/**
+ * @brief Checks if HSI48 ready interrupt source is enabled or disabled.
+ * @rmtoll CIER HSI48RDYIE LL_RCC_IsEnabledIT_HSI48RDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_HSI48RDY(void)
+{
+ return (READ_BIT(RCC->CIER, RCC_CIER_HSI48RDYIE) == (RCC_CIER_HSI48RDYIE));
+}
+#endif /* RCC_HSI48_SUPPORT */
+
+/**
+ * @brief Checks if PLLSAI1 ready interrupt source is enabled or disabled.
+ * @rmtoll CIER PLLSAI1RDYIE LL_RCC_IsEnabledIT_PLLSAI1RDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLSAI1RDY(void)
+{
+ return (READ_BIT(RCC->CIER, RCC_CIER_PLLSAI1RDYIE) == (RCC_CIER_PLLSAI1RDYIE));
+}
+
+#if defined(RCC_PLLSAI2_SUPPORT)
+/**
+ * @brief Checks if PLLSAI2 ready interrupt source is enabled or disabled.
+ * @rmtoll CIER PLLSAI2RDYIE LL_RCC_IsEnabledIT_PLLSAI2RDY
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_PLLSAI2RDY(void)
+{
+ return (READ_BIT(RCC->CIER, RCC_CIER_PLLSAI2RDYIE) == (RCC_CIER_PLLSAI2RDYIE));
+}
+#endif /* RCC_PLLSAI2_SUPPORT */
+
+/**
+ * @brief Checks if LSECSS interrupt source is enabled or disabled.
+ * @rmtoll CIER LSECSSIE LL_RCC_IsEnabledIT_LSECSS
+ * @retval State of bit (1 or 0).
+ */
+__STATIC_INLINE uint32_t LL_RCC_IsEnabledIT_LSECSS(void)
+{
+ return (READ_BIT(RCC->CIER, RCC_CIER_LSECSSIE) == (RCC_CIER_LSECSSIE));
+}
+
+/**
+ * @}
+ */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup RCC_LL_EF_Init De-initialization function
+ * @{
+ */
+ErrorStatus LL_RCC_DeInit(void);
+/**
+ * @}
+ */
+
+/** @defgroup RCC_LL_EF_Get_Freq Get system and peripherals clocks frequency functions
+ * @{
+ */
+void LL_RCC_GetSystemClocksFreq(LL_RCC_ClocksTypeDef *RCC_Clocks);
+uint32_t LL_RCC_GetUSARTClockFreq(uint32_t USARTxSource);
+#if defined(UART4) || defined(UART5)
+uint32_t LL_RCC_GetUARTClockFreq(uint32_t UARTxSource);
+#endif /* UART4 || UART5 */
+uint32_t LL_RCC_GetI2CClockFreq(uint32_t I2CxSource);
+uint32_t LL_RCC_GetLPUARTClockFreq(uint32_t LPUARTxSource);
+uint32_t LL_RCC_GetLPTIMClockFreq(uint32_t LPTIMxSource);
+uint32_t LL_RCC_GetSAIClockFreq(uint32_t SAIxSource);
+#if defined(RCC_CCIPR2_SDMMCSEL)
+uint32_t LL_RCC_GetSDMMCKernelClockFreq(uint32_t SDMMCxSource);
+#endif
+uint32_t LL_RCC_GetSDMMCClockFreq(uint32_t SDMMCxSource);
+uint32_t LL_RCC_GetRNGClockFreq(uint32_t RNGxSource);
+#if defined(USB_OTG_FS) || defined(USB)
+uint32_t LL_RCC_GetUSBClockFreq(uint32_t USBxSource);
+#endif /* USB_OTG_FS || USB */
+uint32_t LL_RCC_GetADCClockFreq(uint32_t ADCxSource);
+#if defined(SWPMI1)
+uint32_t LL_RCC_GetSWPMIClockFreq(uint32_t SWPMIxSource);
+#endif /* SWPMI1 */
+#if defined(DFSDM1_Channel0)
+uint32_t LL_RCC_GetDFSDMClockFreq(uint32_t DFSDMxSource);
+#if defined(RCC_CCIPR2_DFSDM1SEL)
+uint32_t LL_RCC_GetDFSDMAudioClockFreq(uint32_t DFSDMxSource);
+#endif /* RCC_CCIPR2_DFSDM1SEL */
+#endif /* DFSDM1_Channel0 */
+#if defined(LTDC)
+uint32_t LL_RCC_GetLTDCClockFreq(uint32_t LTDCxSource);
+#endif /* LTDC */
+#if defined(DSI)
+uint32_t LL_RCC_GetDSIClockFreq(uint32_t DSIxSource);
+#endif /* DSI */
+#if defined(OCTOSPI1)
+uint32_t LL_RCC_GetOCTOSPIClockFreq(uint32_t OCTOSPIxSource);
+#endif /* OCTOSPI1 */
+/**
+ * @}
+ */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(RCC) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_LL_RCC_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
