mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_L496ZG_P/TOOLCHAIN_ARM_STD/stm32l4xx_hal_qspi.h
- Revision:
- 171:3a7713b1edbc
- Parent:
- 161:aa5281ff4a02
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L496ZG_P/TOOLCHAIN_ARM_STD/stm32l4xx_hal_qspi.h Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,698 @@
+/**
+ ******************************************************************************
+ * @file stm32l4xx_hal_qspi.h
+ * @author MCD Application Team
+ * @brief Header file of QSPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L4xx_HAL_QSPI_H
+#define __STM32L4xx_HAL_QSPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l4xx_hal_def.h"
+
+#if defined(QUADSPI) || defined(QUADSPI1) || defined(QUADSPI2)
+
+/** @addtogroup STM32L4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup QSPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Types QSPI Exported Types
+ * @{
+ */
+
+/**
+ * @brief QSPI Init structure definition
+ */
+typedef struct
+{
+ uint32_t ClockPrescaler; /* Specifies the prescaler factor for generating clock based on the AHB clock.
+ This parameter can be a number between 0 and 255 */
+ uint32_t FifoThreshold; /* Specifies the threshold number of bytes in the FIFO (used only in indirect mode)
+ This parameter can be a value between 1 and 16 */
+ uint32_t SampleShifting; /* Specifies the Sample Shift. The data is sampled 1/2 clock cycle delay later to
+ take in account external signal delays. (It should be QSPI_SAMPLE_SHIFTING_NONE in DDR mode)
+ This parameter can be a value of @ref QSPI_SampleShifting */
+ uint32_t FlashSize; /* Specifies the Flash Size. FlashSize+1 is effectively the number of address bits
+ required to address the flash memory. The flash capacity can be up to 4GB
+ (addressed using 32 bits) in indirect mode, but the addressable space in
+ memory-mapped mode is limited to 256MB
+ This parameter can be a number between 0 and 31 */
+ uint32_t ChipSelectHighTime; /* Specifies the Chip Select High Time. ChipSelectHighTime+1 defines the minimum number
+ of clock cycles which the chip select must remain high between commands.
+ This parameter can be a value of @ref QSPI_ChipSelectHighTime */
+ uint32_t ClockMode; /* Specifies the Clock Mode. It indicates the level that clock takes between commands.
+ This parameter can be a value of @ref QSPI_ClockMode */
+#if defined(QUADSPI_CR_DFM)
+ uint32_t FlashID; /* Specifies the Flash which will be used,
+ This parameter can be a value of @ref QSPI_Flash_Select */
+ uint32_t DualFlash; /* Specifies the Dual Flash Mode State
+ This parameter can be a value of @ref QSPI_DualFlash_Mode */
+#endif
+}QSPI_InitTypeDef;
+
+/**
+ * @brief HAL QSPI State structures definition
+ */
+typedef enum
+{
+ HAL_QSPI_STATE_RESET = 0x00, /*!< Peripheral not initialized */
+ HAL_QSPI_STATE_READY = 0x01, /*!< Peripheral initialized and ready for use */
+ HAL_QSPI_STATE_BUSY = 0x02, /*!< Peripheral in indirect mode and busy */
+ HAL_QSPI_STATE_BUSY_INDIRECT_TX = 0x12, /*!< Peripheral in indirect mode with transmission ongoing */
+ HAL_QSPI_STATE_BUSY_INDIRECT_RX = 0x22, /*!< Peripheral in indirect mode with reception ongoing */
+ HAL_QSPI_STATE_BUSY_AUTO_POLLING = 0x42, /*!< Peripheral in auto polling mode ongoing */
+ HAL_QSPI_STATE_BUSY_MEM_MAPPED = 0x82, /*!< Peripheral in memory mapped mode ongoing */
+ HAL_QSPI_STATE_ABORT = 0x08, /*!< Peripheral with abort request ongoing */
+ HAL_QSPI_STATE_ERROR = 0x04 /*!< Peripheral in error */
+}HAL_QSPI_StateTypeDef;
+
+/**
+ * @brief QSPI Handle Structure definition
+ */
+typedef struct
+{
+ QUADSPI_TypeDef *Instance; /* QSPI registers base address */
+ QSPI_InitTypeDef Init; /* QSPI communication parameters */
+ uint8_t *pTxBuffPtr; /* Pointer to QSPI Tx transfer Buffer */
+ __IO uint32_t TxXferSize; /* QSPI Tx Transfer size */
+ __IO uint32_t TxXferCount; /* QSPI Tx Transfer Counter */
+ uint8_t *pRxBuffPtr; /* Pointer to QSPI Rx transfer Buffer */
+ __IO uint32_t RxXferSize; /* QSPI Rx Transfer size */
+ __IO uint32_t RxXferCount; /* QSPI Rx Transfer Counter */
+ DMA_HandleTypeDef *hdma; /* QSPI Rx/Tx DMA Handle parameters */
+ __IO HAL_LockTypeDef Lock; /* Locking object */
+ __IO HAL_QSPI_StateTypeDef State; /* QSPI communication state */
+ __IO uint32_t ErrorCode; /* QSPI Error code */
+ uint32_t Timeout; /* Timeout for the QSPI memory access */
+}QSPI_HandleTypeDef;
+
+/**
+ * @brief QSPI Command structure definition
+ */
+typedef struct
+{
+ uint32_t Instruction; /* Specifies the Instruction to be sent
+ This parameter can be a value (8-bit) between 0x00 and 0xFF */
+ uint32_t Address; /* Specifies the Address to be sent (Size from 1 to 4 bytes according AddressSize)
+ This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */
+ uint32_t AlternateBytes; /* Specifies the Alternate Bytes to be sent (Size from 1 to 4 bytes according AlternateBytesSize)
+ This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */
+ uint32_t AddressSize; /* Specifies the Address Size
+ This parameter can be a value of @ref QSPI_AddressSize */
+ uint32_t AlternateBytesSize; /* Specifies the Alternate Bytes Size
+ This parameter can be a value of @ref QSPI_AlternateBytesSize */
+ uint32_t DummyCycles; /* Specifies the Number of Dummy Cycles.
+ This parameter can be a number between 0 and 31 */
+ uint32_t InstructionMode; /* Specifies the Instruction Mode
+ This parameter can be a value of @ref QSPI_InstructionMode */
+ uint32_t AddressMode; /* Specifies the Address Mode
+ This parameter can be a value of @ref QSPI_AddressMode */
+ uint32_t AlternateByteMode; /* Specifies the Alternate Bytes Mode
+ This parameter can be a value of @ref QSPI_AlternateBytesMode */
+ uint32_t DataMode; /* Specifies the Data Mode (used for dummy cycles and data phases)
+ This parameter can be a value of @ref QSPI_DataMode */
+ uint32_t NbData; /* Specifies the number of data to transfer. (This is the number of bytes)
+ This parameter can be any value between 0 and 0xFFFFFFFF (0 means undefined length
+ until end of memory)*/
+ uint32_t DdrMode; /* Specifies the double data rate mode for address, alternate byte and data phase
+ This parameter can be a value of @ref QSPI_DdrMode */
+ uint32_t DdrHoldHalfCycle; /* Specifies the DDR hold half cycle. It delays the data output by one half of
+ system clock in DDR mode. Not available on STM32L4x6 devices but in future devices.
+ This parameter can be a value of @ref QSPI_DdrHoldHalfCycle */
+ uint32_t SIOOMode; /* Specifies the send instruction only once mode
+ This parameter can be a value of @ref QSPI_SIOOMode */
+}QSPI_CommandTypeDef;
+
+/**
+ * @brief QSPI Auto Polling mode configuration structure definition
+ */
+typedef struct
+{
+ uint32_t Match; /* Specifies the value to be compared with the masked status register to get a match.
+ This parameter can be any value between 0 and 0xFFFFFFFF */
+ uint32_t Mask; /* Specifies the mask to be applied to the status bytes received.
+ This parameter can be any value between 0 and 0xFFFFFFFF */
+ uint32_t Interval; /* Specifies the number of clock cycles between two read during automatic polling phases.
+ This parameter can be any value between 0 and 0xFFFF */
+ uint32_t StatusBytesSize; /* Specifies the size of the status bytes received.
+ This parameter can be any value between 1 and 4 */
+ uint32_t MatchMode; /* Specifies the method used for determining a match.
+ This parameter can be a value of @ref QSPI_MatchMode */
+ uint32_t AutomaticStop; /* Specifies if automatic polling is stopped after a match.
+ This parameter can be a value of @ref QSPI_AutomaticStop */
+}QSPI_AutoPollingTypeDef;
+
+/**
+ * @brief QSPI Memory Mapped mode configuration structure definition
+ */
+typedef struct
+{
+ uint32_t TimeOutPeriod; /* Specifies the number of clock to wait when the FIFO is full before to release the chip select.
+ This parameter can be any value between 0 and 0xFFFF */
+ uint32_t TimeOutActivation; /* Specifies if the timeout counter is enabled to release the chip select.
+ This parameter can be a value of @ref QSPI_TimeOutActivation */
+}QSPI_MemoryMappedTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Constants QSPI Exported Constants
+ * @{
+ */
+
+/** @defgroup QSPI_ErrorCode QSPI Error Code
+ * @{
+ */
+#define HAL_QSPI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_QSPI_ERROR_TIMEOUT ((uint32_t)0x00000001) /*!< Timeout error */
+#define HAL_QSPI_ERROR_TRANSFER ((uint32_t)0x00000002) /*!< Transfer error */
+#define HAL_QSPI_ERROR_DMA ((uint32_t)0x00000004) /*!< DMA transfer error */
+#define HAL_QSPI_ERROR_INVALID_PARAM ((uint32_t)0x00000008) /*!< Invalid parameters error */
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_SampleShifting QSPI Sample Shifting
+ * @{
+ */
+#define QSPI_SAMPLE_SHIFTING_NONE ((uint32_t)0x00000000) /*!<No clock cycle shift to sample data*/
+#define QSPI_SAMPLE_SHIFTING_HALFCYCLE ((uint32_t)QUADSPI_CR_SSHIFT) /*!<1/2 clock cycle shift to sample data*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_ChipSelectHighTime QSPI ChipSelect High Time
+ * @{
+ */
+#define QSPI_CS_HIGH_TIME_1_CYCLE ((uint32_t)0x00000000) /*!<nCS stay high for at least 1 clock cycle between commands*/
+#define QSPI_CS_HIGH_TIME_2_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 2 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_3_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 3 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_4_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_0 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 4 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_5_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2) /*!<nCS stay high for at least 5 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_6_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 6 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_7_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 7 clock cycles between commands*/
+#define QSPI_CS_HIGH_TIME_8_CYCLE ((uint32_t)QUADSPI_DCR_CSHT) /*!<nCS stay high for at least 8 clock cycles between commands*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_ClockMode QSPI Clock Mode
+ * @{
+ */
+#define QSPI_CLOCK_MODE_0 ((uint32_t)0x00000000) /*!<Clk stays low while nCS is released*/
+#define QSPI_CLOCK_MODE_3 ((uint32_t)QUADSPI_DCR_CKMODE) /*!<Clk goes high while nCS is released*/
+/**
+ * @}
+ */
+
+#if defined(QUADSPI_CR_DFM)
+/** @defgroup QSPI_Flash_Select QSPI Flash Select
+ * @{
+ */
+#define QSPI_FLASH_ID_1 ((uint32_t)0x00000000) /*!<FLASH 1 selected*/
+#define QSPI_FLASH_ID_2 ((uint32_t)QUADSPI_CR_FSEL) /*!<FLASH 2 selected*/
+/**
+ * @}
+ */
+
+ /** @defgroup QSPI_DualFlash_Mode QSPI Dual Flash Mode
+ * @{
+ */
+#define QSPI_DUALFLASH_ENABLE ((uint32_t)QUADSPI_CR_DFM) /*!<Dual-flash mode enabled*/
+#define QSPI_DUALFLASH_DISABLE ((uint32_t)0x00000000) /*!<Dual-flash mode disabled*/
+/**
+ * @}
+ */
+#endif
+
+/** @defgroup QSPI_AddressSize QSPI Address Size
+ * @{
+ */
+#define QSPI_ADDRESS_8_BITS ((uint32_t)0x00000000) /*!<8-bit address*/
+#define QSPI_ADDRESS_16_BITS ((uint32_t)QUADSPI_CCR_ADSIZE_0) /*!<16-bit address*/
+#define QSPI_ADDRESS_24_BITS ((uint32_t)QUADSPI_CCR_ADSIZE_1) /*!<24-bit address*/
+#define QSPI_ADDRESS_32_BITS ((uint32_t)QUADSPI_CCR_ADSIZE) /*!<32-bit address*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AlternateBytesSize QSPI Alternate Bytes Size
+ * @{
+ */
+#define QSPI_ALTERNATE_BYTES_8_BITS ((uint32_t)0x00000000) /*!<8-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_16_BITS ((uint32_t)QUADSPI_CCR_ABSIZE_0) /*!<16-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_24_BITS ((uint32_t)QUADSPI_CCR_ABSIZE_1) /*!<24-bit alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_32_BITS ((uint32_t)QUADSPI_CCR_ABSIZE) /*!<32-bit alternate bytes*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_InstructionMode QSPI Instruction Mode
+* @{
+*/
+#define QSPI_INSTRUCTION_NONE ((uint32_t)0x00000000) /*!<No instruction*/
+#define QSPI_INSTRUCTION_1_LINE ((uint32_t)QUADSPI_CCR_IMODE_0) /*!<Instruction on a single line*/
+#define QSPI_INSTRUCTION_2_LINES ((uint32_t)QUADSPI_CCR_IMODE_1) /*!<Instruction on two lines*/
+#define QSPI_INSTRUCTION_4_LINES ((uint32_t)QUADSPI_CCR_IMODE) /*!<Instruction on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AddressMode QSPI Address Mode
+* @{
+*/
+#define QSPI_ADDRESS_NONE ((uint32_t)0x00000000) /*!<No address*/
+#define QSPI_ADDRESS_1_LINE ((uint32_t)QUADSPI_CCR_ADMODE_0) /*!<Address on a single line*/
+#define QSPI_ADDRESS_2_LINES ((uint32_t)QUADSPI_CCR_ADMODE_1) /*!<Address on two lines*/
+#define QSPI_ADDRESS_4_LINES ((uint32_t)QUADSPI_CCR_ADMODE) /*!<Address on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AlternateBytesMode QSPI Alternate Bytes Mode
+* @{
+*/
+#define QSPI_ALTERNATE_BYTES_NONE ((uint32_t)0x00000000) /*!<No alternate bytes*/
+#define QSPI_ALTERNATE_BYTES_1_LINE ((uint32_t)QUADSPI_CCR_ABMODE_0) /*!<Alternate bytes on a single line*/
+#define QSPI_ALTERNATE_BYTES_2_LINES ((uint32_t)QUADSPI_CCR_ABMODE_1) /*!<Alternate bytes on two lines*/
+#define QSPI_ALTERNATE_BYTES_4_LINES ((uint32_t)QUADSPI_CCR_ABMODE) /*!<Alternate bytes on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_DataMode QSPI Data Mode
+ * @{
+ */
+#define QSPI_DATA_NONE ((uint32_t)0X00000000) /*!<No data*/
+#define QSPI_DATA_1_LINE ((uint32_t)QUADSPI_CCR_DMODE_0) /*!<Data on a single line*/
+#define QSPI_DATA_2_LINES ((uint32_t)QUADSPI_CCR_DMODE_1) /*!<Data on two lines*/
+#define QSPI_DATA_4_LINES ((uint32_t)QUADSPI_CCR_DMODE) /*!<Data on four lines*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_DdrMode QSPI DDR Mode
+ * @{
+ */
+#define QSPI_DDR_MODE_DISABLE ((uint32_t)0x00000000) /*!<Double data rate mode disabled*/
+#define QSPI_DDR_MODE_ENABLE ((uint32_t)QUADSPI_CCR_DDRM) /*!<Double data rate mode enabled*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_DdrHoldHalfCycle QSPI DDR Data Output Delay
+ * @{
+ */
+#define QSPI_DDR_HHC_ANALOG_DELAY ((uint32_t)0x00000000) /*!<Delay the data output using analog delay in DDR mode*/
+#if defined(QUADSPI_CCR_DHHC)
+#define QSPI_DDR_HHC_HALF_CLK_DELAY ((uint32_t)QUADSPI_CCR_DHHC) /*!<Delay the data output by 1/2 clock cycle in DDR mode*/
+#endif
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_SIOOMode QSPI Send Instruction Mode
+ * @{
+ */
+#define QSPI_SIOO_INST_EVERY_CMD ((uint32_t)0x00000000) /*!<Send instruction on every transaction*/
+#define QSPI_SIOO_INST_ONLY_FIRST_CMD ((uint32_t)QUADSPI_CCR_SIOO) /*!<Send instruction only for the first command*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_MatchMode QSPI Match Mode
+ * @{
+ */
+#define QSPI_MATCH_MODE_AND ((uint32_t)0x00000000) /*!<AND match mode between unmasked bits*/
+#define QSPI_MATCH_MODE_OR ((uint32_t)QUADSPI_CR_PMM) /*!<OR match mode between unmasked bits*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_AutomaticStop QSPI Automatic Stop
+ * @{
+ */
+#define QSPI_AUTOMATIC_STOP_DISABLE ((uint32_t)0x00000000) /*!<AutoPolling stops only with abort or QSPI disabling*/
+#define QSPI_AUTOMATIC_STOP_ENABLE ((uint32_t)QUADSPI_CR_APMS) /*!<AutoPolling stops as soon as there is a match*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_TimeOutActivation QSPI Timeout Activation
+ * @{
+ */
+#define QSPI_TIMEOUT_COUNTER_DISABLE ((uint32_t)0x00000000) /*!<Timeout counter disabled, nCS remains active*/
+#define QSPI_TIMEOUT_COUNTER_ENABLE ((uint32_t)QUADSPI_CR_TCEN) /*!<Timeout counter enabled, nCS released when timeout expires*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Flags QSPI Flags
+ * @{
+ */
+#define QSPI_FLAG_BUSY QUADSPI_SR_BUSY /*!<Busy flag: operation is ongoing*/
+#define QSPI_FLAG_TO QUADSPI_SR_TOF /*!<Timeout flag: timeout occurs in memory-mapped mode*/
+#define QSPI_FLAG_SM QUADSPI_SR_SMF /*!<Status match flag: received data matches in autopolling mode*/
+#define QSPI_FLAG_FT QUADSPI_SR_FTF /*!<Fifo threshold flag: Fifo threshold reached or data left after read from memory is complete*/
+#define QSPI_FLAG_TC QUADSPI_SR_TCF /*!<Transfer complete flag: programmed number of data have been transferred or the transfer has been aborted*/
+#define QSPI_FLAG_TE QUADSPI_SR_TEF /*!<Transfer error flag: invalid address is being accessed*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Interrupts QSPI Interrupts
+ * @{
+ */
+#define QSPI_IT_TO QUADSPI_CR_TOIE /*!<Interrupt on the timeout flag*/
+#define QSPI_IT_SM QUADSPI_CR_SMIE /*!<Interrupt on the status match flag*/
+#define QSPI_IT_FT QUADSPI_CR_FTIE /*!<Interrupt on the fifo threshold flag*/
+#define QSPI_IT_TC QUADSPI_CR_TCIE /*!<Interrupt on the transfer complete flag*/
+#define QSPI_IT_TE QUADSPI_CR_TEIE /*!<Interrupt on the transfer error flag*/
+/**
+ * @}
+ */
+
+/** @defgroup QSPI_Timeout_definition QSPI Timeout definition
+ * @brief QSPI Timeout definition
+ * @{
+ */
+#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE ((uint32_t)5000)/* 5 s */
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup QSPI_Exported_Macros QSPI Exported Macros
+ * @{
+ */
+/** @brief Reset QSPI handle state.
+ * @param __HANDLE__ : QSPI handle.
+ * @retval None
+ */
+#define __HAL_QSPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_QSPI_STATE_RESET)
+
+/** @brief Enable the QSPI peripheral.
+ * @param __HANDLE__ : specifies the QSPI Handle.
+ * @retval None
+ */
+#define __HAL_QSPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief Disable the QSPI peripheral.
+ * @param __HANDLE__ : specifies the QSPI Handle.
+ * @retval None
+ */
+#define __HAL_QSPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN)
+
+/** @brief Enable the specified QSPI interrupt.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __INTERRUPT__: specifies the QSPI interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg QSPI_IT_TO: QSPI Timeout interrupt
+ * @arg QSPI_IT_SM: QSPI Status match interrupt
+ * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+ * @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+ * @arg QSPI_IT_TE: QSPI Transfer error interrupt
+ * @retval None
+ */
+#define __HAL_QSPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+
+/** @brief Disable the specified QSPI interrupt.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __INTERRUPT__: specifies the QSPI interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg QSPI_IT_TO: QSPI Timeout interrupt
+ * @arg QSPI_IT_SM: QSPI Status match interrupt
+ * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+ * @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+ * @arg QSPI_IT_TE: QSPI Transfer error interrupt
+ * @retval None
+ */
+#define __HAL_QSPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__))
+
+/** @brief Check whether the specified QSPI interrupt source is enabled or not.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __INTERRUPT__: specifies the QSPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg QSPI_IT_TO: QSPI Timeout interrupt
+ * @arg QSPI_IT_SM: QSPI Status match interrupt
+ * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt
+ * @arg QSPI_IT_TC: QSPI Transfer complete interrupt
+ * @arg QSPI_IT_TE: QSPI Transfer error interrupt
+ * @retval The new state of __INTERRUPT__ (TRUE or FALSE).
+ */
+#define __HAL_QSPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) == (__INTERRUPT__))
+
+/**
+ * @brief Check whether the selected QSPI flag is set or not.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __FLAG__: specifies the QSPI flag to check.
+ * This parameter can be one of the following values:
+ * @arg QSPI_FLAG_BUSY: QSPI Busy flag
+ * @arg QSPI_FLAG_TO: QSPI Timeout flag
+ * @arg QSPI_FLAG_SM: QSPI Status match flag
+ * @arg QSPI_FLAG_FT: QSPI FIFO threshold flag
+ * @arg QSPI_FLAG_TC: QSPI Transfer complete flag
+ * @arg QSPI_FLAG_TE: QSPI Transfer error flag
+ * @retval None
+ */
+#define __HAL_QSPI_GET_FLAG(__HANDLE__, __FLAG__) ((READ_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) != 0) ? SET : RESET)
+
+/** @brief Clears the specified QSPI's flag status.
+ * @param __HANDLE__: specifies the QSPI Handle.
+ * @param __FLAG__: specifies the QSPI clear register flag that needs to be set
+ * This parameter can be one of the following values:
+ * @arg QSPI_FLAG_TO: QSPI Timeout flag
+ * @arg QSPI_FLAG_SM: QSPI Status match flag
+ * @arg QSPI_FLAG_TC: QSPI Transfer complete flag
+ * @arg QSPI_FLAG_TE: QSPI Transfer error flag
+ * @retval None
+ */
+#define __HAL_QSPI_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->FCR, (__FLAG__))
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup QSPI_Exported_Functions
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+HAL_StatusTypeDef HAL_QSPI_Init (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef HAL_QSPI_DeInit (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_MspInit (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi);
+
+/* IO operation functions *****************************************************/
+/* QSPI IRQ handler method */
+void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+HAL_StatusTypeDef HAL_QSPI_Command (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_Transmit (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_Receive (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_Command_IT (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd);
+HAL_StatusTypeDef HAL_QSPI_Transmit_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef HAL_QSPI_Receive_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef HAL_QSPI_Transmit_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+HAL_StatusTypeDef HAL_QSPI_Receive_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData);
+
+/* QSPI status flag polling mode */
+HAL_StatusTypeDef HAL_QSPI_AutoPolling (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg);
+
+/* QSPI memory-mapped mode */
+HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg);
+
+/* Callback functions in non-blocking modes ***********************************/
+void HAL_QSPI_ErrorCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_AbortCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi);
+
+/* QSPI indirect mode */
+void HAL_QSPI_CmdCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_RxCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_TxCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_RxHalfCpltCallback (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_TxHalfCpltCallback (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI status flag polling mode */
+void HAL_QSPI_StatusMatchCallback (QSPI_HandleTypeDef *hqspi);
+
+/* QSPI memory-mapped mode */
+void HAL_QSPI_TimeOutCallback (QSPI_HandleTypeDef *hqspi);
+
+/* Peripheral Control and State functions ************************************/
+HAL_QSPI_StateTypeDef HAL_QSPI_GetState (QSPI_HandleTypeDef *hqspi);
+uint32_t HAL_QSPI_GetError (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef HAL_QSPI_Abort (QSPI_HandleTypeDef *hqspi);
+HAL_StatusTypeDef HAL_QSPI_Abort_IT (QSPI_HandleTypeDef *hqspi);
+void HAL_QSPI_SetTimeout (QSPI_HandleTypeDef *hqspi, uint32_t Timeout);
+HAL_StatusTypeDef HAL_QSPI_SetFifoThreshold(QSPI_HandleTypeDef *hqspi, uint32_t Threshold);
+uint32_t HAL_QSPI_GetFifoThreshold(QSPI_HandleTypeDef *hqspi);
+/**
+ * @}
+ */
+/* End of exported functions -------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup QSPI_Private_Macros QSPI Private Macros
+* @{
+*/
+#define IS_QSPI_CLOCK_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFF)
+
+#define IS_QSPI_FIFO_THRESHOLD(THR) (((THR) > 0) && ((THR) <= 16))
+
+#define IS_QSPI_SSHIFT(SSHIFT) (((SSHIFT) == QSPI_SAMPLE_SHIFTING_NONE) || \
+ ((SSHIFT) == QSPI_SAMPLE_SHIFTING_HALFCYCLE))
+
+#define IS_QSPI_FLASH_SIZE(FSIZE) (((FSIZE) <= 31))
+
+#define IS_QSPI_CS_HIGH_TIME(CSHTIME) (((CSHTIME) == QSPI_CS_HIGH_TIME_1_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_2_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_3_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_4_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_5_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_6_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_7_CYCLE) || \
+ ((CSHTIME) == QSPI_CS_HIGH_TIME_8_CYCLE))
+
+#define IS_QSPI_CLOCK_MODE(CLKMODE) (((CLKMODE) == QSPI_CLOCK_MODE_0) || \
+ ((CLKMODE) == QSPI_CLOCK_MODE_3))
+
+#if defined(QUADSPI_CR_DFM)
+#define IS_QSPI_FLASH_ID(FLASH) (((FLASH) == QSPI_FLASH_ID_1) || \
+ ((FLASH) == QSPI_FLASH_ID_2))
+
+#define IS_QSPI_DUAL_FLASH_MODE(MODE) (((MODE) == QSPI_DUALFLASH_ENABLE) || \
+ ((MODE) == QSPI_DUALFLASH_DISABLE))
+#endif
+
+#define IS_QSPI_INSTRUCTION(INSTRUCTION) ((INSTRUCTION) <= 0xFF)
+
+#define IS_QSPI_ADDRESS_SIZE(ADDR_SIZE) (((ADDR_SIZE) == QSPI_ADDRESS_8_BITS) || \
+ ((ADDR_SIZE) == QSPI_ADDRESS_16_BITS) || \
+ ((ADDR_SIZE) == QSPI_ADDRESS_24_BITS) || \
+ ((ADDR_SIZE) == QSPI_ADDRESS_32_BITS))
+
+#define IS_QSPI_ALTERNATE_BYTES_SIZE(SIZE) (((SIZE) == QSPI_ALTERNATE_BYTES_8_BITS) || \
+ ((SIZE) == QSPI_ALTERNATE_BYTES_16_BITS) || \
+ ((SIZE) == QSPI_ALTERNATE_BYTES_24_BITS) || \
+ ((SIZE) == QSPI_ALTERNATE_BYTES_32_BITS))
+
+#define IS_QSPI_DUMMY_CYCLES(DCY) ((DCY) <= 31)
+
+#define IS_QSPI_INSTRUCTION_MODE(MODE) (((MODE) == QSPI_INSTRUCTION_NONE) || \
+ ((MODE) == QSPI_INSTRUCTION_1_LINE) || \
+ ((MODE) == QSPI_INSTRUCTION_2_LINES) || \
+ ((MODE) == QSPI_INSTRUCTION_4_LINES))
+
+#define IS_QSPI_ADDRESS_MODE(MODE) (((MODE) == QSPI_ADDRESS_NONE) || \
+ ((MODE) == QSPI_ADDRESS_1_LINE) || \
+ ((MODE) == QSPI_ADDRESS_2_LINES) || \
+ ((MODE) == QSPI_ADDRESS_4_LINES))
+
+#define IS_QSPI_ALTERNATE_BYTES_MODE(MODE) (((MODE) == QSPI_ALTERNATE_BYTES_NONE) || \
+ ((MODE) == QSPI_ALTERNATE_BYTES_1_LINE) || \
+ ((MODE) == QSPI_ALTERNATE_BYTES_2_LINES) || \
+ ((MODE) == QSPI_ALTERNATE_BYTES_4_LINES))
+
+#define IS_QSPI_DATA_MODE(MODE) (((MODE) == QSPI_DATA_NONE) || \
+ ((MODE) == QSPI_DATA_1_LINE) || \
+ ((MODE) == QSPI_DATA_2_LINES) || \
+ ((MODE) == QSPI_DATA_4_LINES))
+
+#define IS_QSPI_DDR_MODE(DDR_MODE) (((DDR_MODE) == QSPI_DDR_MODE_DISABLE) || \
+ ((DDR_MODE) == QSPI_DDR_MODE_ENABLE))
+
+#if defined(QUADSPI_CCR_DHHC)
+#define IS_QSPI_DDR_HHC(DDR_HHC) (((DDR_HHC) == QSPI_DDR_HHC_ANALOG_DELAY) || \
+ ((DDR_HHC) == QSPI_DDR_HHC_HALF_CLK_DELAY))
+#else
+#define IS_QSPI_DDR_HHC(DDR_HHC) (((DDR_HHC) == QSPI_DDR_HHC_ANALOG_DELAY))
+#endif
+
+#define IS_QSPI_SIOO_MODE(SIOO_MODE) (((SIOO_MODE) == QSPI_SIOO_INST_EVERY_CMD) || \
+ ((SIOO_MODE) == QSPI_SIOO_INST_ONLY_FIRST_CMD))
+
+#define IS_QSPI_INTERVAL(INTERVAL) ((INTERVAL) <= QUADSPI_PIR_INTERVAL)
+
+#define IS_QSPI_STATUS_BYTES_SIZE(SIZE) (((SIZE) >= 1) && ((SIZE) <= 4))
+
+#define IS_QSPI_MATCH_MODE(MODE) (((MODE) == QSPI_MATCH_MODE_AND) || \
+ ((MODE) == QSPI_MATCH_MODE_OR))
+
+#define IS_QSPI_AUTOMATIC_STOP(APMS) (((APMS) == QSPI_AUTOMATIC_STOP_DISABLE) || \
+ ((APMS) == QSPI_AUTOMATIC_STOP_ENABLE))
+
+#define IS_QSPI_TIMEOUT_ACTIVATION(TCEN) (((TCEN) == QSPI_TIMEOUT_COUNTER_DISABLE) || \
+ ((TCEN) == QSPI_TIMEOUT_COUNTER_ENABLE))
+
+#define IS_QSPI_TIMEOUT_PERIOD(PERIOD) ((PERIOD) <= 0xFFFF)
+/**
+* @}
+*/
+/* End of private macros -----------------------------------------------------*/
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(QUADSPI) || defined(QUADSPI1) || defined(QUADSPI2) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L4xx_HAL_QSPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
