mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_smartcard.h
- Revision:
- 171:3a7713b1edbc
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L152RE/TOOLCHAIN_ARM_STD/stm32l1xx_hal_smartcard.h Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,696 @@
+/**
+ ******************************************************************************
+ * @file stm32l1xx_hal_smartcard.h
+ * @author MCD Application Team
+ * @brief This file contains all the functions prototypes for the SMARTCARD
+ * firmware library.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L1xx_HAL_SMARTCARD_H
+#define __STM32L1xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l1xx_hal_def.h"
+
+/** @addtogroup STM32L1xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types
+ * @{
+ */
+
+
+/**
+ * @brief SMARTCARD Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the SmartCard communication baud rate.
+ The baud rate is computed using the following formula:
+ - IntegerDivider = ((PCLKx) / (16 * (hsmartcard->Init.BaudRate)))
+ - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 16) + 0.5 */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref SMARTCARD_Word_Length */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
+ This parameter can be a value of @ref SMARTCARD_Stop_Bits */
+
+ uint32_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref SMARTCARD_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits).*/
+
+ uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref SMARTCARD_Mode */
+
+ uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+ uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref SMARTCARD_Last_Bit */
+
+ uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler value used for dividing the system clock
+ to provide the smartcard clock. The value given in the register
+ (5 significant bits) is multiplied by 2 to give the division factor of
+ the source clock frequency;
+ This parameter can be a value of @ref SMARTCARD_Prescaler */
+
+ uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time value in terms of number
+ of baud clocks */
+
+ uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state
+ This parameter can be a value of @ref SMARTCARD_NACK_State */
+}SMARTCARD_InitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */
+ HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */
+}HAL_SMARTCARD_StateTypeDef;
+
+
+/**
+ * @brief SMARTCARD handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /*!< USART registers base address */
+
+ SMARTCARD_InitTypeDef Init; /*!< SmartCard communication parameters */
+
+ uint8_t *pTxBuffPtr; /*!< Pointer to SmartCard Tx transfer Buffer */
+
+ uint16_t TxXferSize; /*!< SmartCard Tx Transfer size */
+
+ uint16_t TxXferCount; /*!< SmartCard Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /*!< Pointer to SmartCard Rx transfer Buffer */
+
+ uint16_t RxXferSize; /*!< SmartCard Rx Transfer size */
+
+ uint16_t RxXferCount; /*!< SmartCard Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /*!< SmartCard Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /*!< SmartCard Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /*!< Locking object */
+
+ __IO HAL_SMARTCARD_StateTypeDef State; /*!< SmartCard communication state */
+
+ __IO uint32_t ErrorCode; /*!< SmartCard Error code */
+}SMARTCARD_HandleTypeDef;
+
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants
+ * @{
+ */
+
+/** @defgroup SMARTCARD_Error_Codes SMARTCARD Error Codes
+ * @{
+ */
+#define HAL_SMARTCARD_ERROR_NONE (0x00U) /*!< No error */
+#define HAL_SMARTCARD_ERROR_PE (0x01U) /*!< Parity error */
+#define HAL_SMARTCARD_ERROR_NE (0x02U) /*!< Noise error */
+#define HAL_SMARTCARD_ERROR_FE (0x04U) /*!< frame error */
+#define HAL_SMARTCARD_ERROR_ORE (0x08U) /*!< Overrun error */
+#define HAL_SMARTCARD_ERROR_DMA (0x10U) /*!< DMA transfer error */
+
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
+ * @{
+ */
+#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits
+ * @{
+ */
+#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0)
+#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Parity SMARTCARD Parity
+ * @{
+ */
+#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
+#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Mode SMARTCARD Mode
+ * @{
+ */
+#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE)
+#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE)
+#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
+ * @{
+ */
+#define SMARTCARD_POLARITY_LOW (0x00000000U)
+#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
+ * @{
+ */
+#define SMARTCARD_PHASE_1EDGE (0x00000000U)
+#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
+ * @{
+ */
+#define SMARTCARD_LASTBIT_DISABLE (0x00000000U)
+#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method
+ * @{
+ */
+#define SMARTCARD_ONE_BIT_SAMPLE_DISABLE (0x00000000U)
+#define SMARTCARD_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_NACK_State SMARTCARD NACK State
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK)
+#define SMARTCARD_NACK_DISABLE (0x00000000U)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_DMA_Requests SMARTCARD DMA requests
+ * @{
+ */
+
+#define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT)
+#define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR)
+
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Prescaler SMARTCARD Prescaler
+ * @{
+ */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV2 (0x00000001U) /*!< SYSCLK divided by 2 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV4 (0x00000002U) /*!< SYSCLK divided by 4 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV6 (0x00000003U) /*!< SYSCLK divided by 6 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV8 (0x00000004U) /*!< SYSCLK divided by 8 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV10 (0x00000005U) /*!< SYSCLK divided by 10 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV12 (0x00000006U) /*!< SYSCLK divided by 12 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV14 (0x00000007U) /*!< SYSCLK divided by 14 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV16 (0x00000008U) /*!< SYSCLK divided by 16 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV18 (0x00000009U) /*!< SYSCLK divided by 18 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV20 (0x0000000AU) /*!< SYSCLK divided by 20 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV22 (0x0000000BU) /*!< SYSCLK divided by 22 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV24 (0x0000000CU) /*!< SYSCLK divided by 24 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV26 (0x0000000DU) /*!< SYSCLK divided by 26 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV28 (0x0000000EU) /*!< SYSCLK divided by 28 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV30 (0x0000000FU) /*!< SYSCLK divided by 30 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV32 (0x00000010U) /*!< SYSCLK divided by 32 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV34 (0x00000011U) /*!< SYSCLK divided by 34 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV36 (0x00000012U) /*!< SYSCLK divided by 36 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV38 (0x00000013U) /*!< SYSCLK divided by 38 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV40 (0x00000014U) /*!< SYSCLK divided by 40 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV42 (0x00000015U) /*!< SYSCLK divided by 42 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV44 (0x00000016U) /*!< SYSCLK divided by 44 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV46 (0x00000017U) /*!< SYSCLK divided by 46 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV48 (0x00000018U) /*!< SYSCLK divided by 48 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV50 (0x00000019U) /*!< SYSCLK divided by 50 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV52 (0x0000001AU) /*!< SYSCLK divided by 52 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV54 (0x0000001BU) /*!< SYSCLK divided by 54 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV56 (0x0000001CU) /*!< SYSCLK divided by 56 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV58 (0x0000001DU) /*!< SYSCLK divided by 58 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV60 (0x0000001EU) /*!< SYSCLK divided by 60 */
+#define SMARTCARD_PRESCALER_SYSCLK_DIV62 (0x0000001FU) /*!< SYSCLK divided by 62 */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup SMARTCARD_Flags SMARTCARD Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the SR register
+ * @{
+ */
+
+#define SMARTCARD_FLAG_TXE ((uint32_t)USART_SR_TXE)
+#define SMARTCARD_FLAG_TC ((uint32_t)USART_SR_TC)
+#define SMARTCARD_FLAG_RXNE ((uint32_t)USART_SR_RXNE)
+#define SMARTCARD_FLAG_IDLE ((uint32_t)USART_SR_IDLE)
+#define SMARTCARD_FLAG_ORE ((uint32_t)USART_SR_ORE)
+#define SMARTCARD_FLAG_NE ((uint32_t)USART_SR_NE)
+#define SMARTCARD_FLAG_FE ((uint32_t)USART_SR_FE)
+#define SMARTCARD_FLAG_PE ((uint32_t)USART_SR_PE)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupts Definition
+ * Elements values convention: 0xY000XXXX
+ * - XXXX : Interrupt mask (16 bits) in the Y register
+ * - Y : Interrupt source register (4 bits)
+ * - 0001: CR1 register
+ * - 0010: CR3 register
+
+ *
+ * @{
+ */
+
+#define SMARTCARD_IT_PE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_PEIE))
+#define SMARTCARD_IT_TXE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_TXEIE))
+#define SMARTCARD_IT_TC ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_TCIE))
+#define SMARTCARD_IT_RXNE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE))
+#define SMARTCARD_IT_IDLE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE))
+#define SMARTCARD_IT_ERR ((uint32_t)(SMARTCARD_CR3_REG_INDEX << 28 | USART_CR3_EIE))
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros
+ * @{
+ */
+
+
+/** @brief Reset SMARTCARD handle state
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
+
+/** @brief Flush the Smartcard DR register
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR)
+
+/** @brief Check whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
+ * @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag
+ * @arg SMARTCARD_FLAG_ORE: OverRun Error flag
+ * @arg SMARTCARD_FLAG_NE: Noise Error flag
+ * @arg SMARTCARD_FLAG_FE: Framing Error flag
+ * @arg SMARTCARD_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the specified Smartcard pending flags.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be any combination of the following values:
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag.
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag.
+ * @retval None
+ *
+ * @note PE (Parity error), FE (Framing error), NE (Noise error) and ORE (OverRun
+ * error) flags are cleared by software sequence: a read operation to
+ * USART_SR register followed by a read operation to USART_DR register.
+ * @note RXNE flag can be also cleared by a read to the USART_DR register.
+ * @note TC flag can be also cleared by software sequence: a read operation to
+ * USART_SR register followed by a write operation to USART_DR register.
+ * @note TXE flag is cleared only by a write to the USART_DR register.
+ *
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__))
+
+/** @brief Clear the SMARTCARD PE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) \
+do{ \
+ __IO uint32_t tmpreg; \
+ tmpreg = (__HANDLE__)->Instance->SR; \
+ tmpreg = (__HANDLE__)->Instance->DR; \
+ UNUSED(tmpreg); \
+}while(0)
+
+
+
+/** @brief Clear the SMARTCARD FE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD NE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD ORE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Clear the SMARTCARD IDLE pending flag.
+ * @param __HANDLE__: specifies the USART Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__)
+
+/** @brief Enable the specified SmartCard interrupt.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
+
+/** @brief Disable the specified SmartCard interrupts.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ */
+#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == SMARTCARD_CR1_REG_INDEX)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \
+ ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK)))
+
+/** @brief Check whether the specified SmartCard interrupt has occurred or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @param __IT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == SMARTCARD_CR1_REG_INDEX)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK))
+
+/** @brief Enables the SMARTCARD one bit sample method
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR3, (USART_CR3_ONEBIT)))
+
+/** @brief Disables the SMARTCARD one bit sample method
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR3, (USART_CR3_ONEBIT)))
+
+/** @brief Enable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE))
+
+/** @brief Disable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE))
+
+/** @brief Enable the SmartCard DMA request.
+ * @param __HANDLE__: specifies the SmartCard Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @param __REQUEST__: specifies the SmartCard DMA request.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request
+ * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) (SET_BIT((__HANDLE__)->Instance->CR3, (__REQUEST__)))
+
+/** @brief Disable the SmartCard DMA request.
+ * @param __HANDLE__: specifies the SmartCard Handle.
+ * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device).
+ * @param __REQUEST__: specifies the SmartCard DMA request.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request
+ * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) (CLEAR_BIT((__HANDLE__)->Instance->CR3, (__REQUEST__)))
+
+
+/**
+ * @}
+ */
+
+
+/* Private macros --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros
+ * @{
+ */
+
+#define SMARTCARD_CR1_REG_INDEX 1
+#define SMARTCARD_CR3_REG_INDEX 3
+
+#define SMARTCARD_DIV(__PCLK__, __BAUD__) (((__PCLK__)*25)/(4*(__BAUD__)))
+#define SMARTCARD_DIVMANT(__PCLK__, __BAUD__) (SMARTCARD_DIV((__PCLK__), (__BAUD__))/100)
+#define SMARTCARD_DIVFRAQ(__PCLK__, __BAUD__) (((SMARTCARD_DIV((__PCLK__), (__BAUD__)) - (SMARTCARD_DIVMANT((__PCLK__), (__BAUD__)) * 100)) * 16 + 50) / 100)
+/* UART BRR = mantissa + overflow + fraction
+ = (UART DIVMANT << 4) + (UART DIVFRAQ & 0xF0) + (UART DIVFRAQ & 0x0F) */
+#define SMARTCARD_BRR(_PCLK_, _BAUD_) (((SMARTCARD_DIVMANT((_PCLK_), (_BAUD_)) << 4) + \
+ (SMARTCARD_DIVFRAQ((_PCLK_), (_BAUD_)) & 0xF0)) + \
+ (SMARTCARD_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F))
+
+/** Check the Baud rate range.
+ * The maximum Baud Rate is derived from the maximum clock on APB (i.e. 32 MHz)
+ * divided by the smallest oversampling used on the USART (i.e. 16)
+ * __BAUDRATE__: Baud rate set by the configuration function.
+ * Return : TRUE or FALSE
+ */
+#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 2000001)
+
+#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B)
+
+#define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \
+ ((STOPBITS) == SMARTCARD_STOPBITS_1_5))
+
+#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \
+ ((PARITY) == SMARTCARD_PARITY_ODD))
+
+#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (~((uint32_t)SMARTCARD_MODE_TX_RX))) == 0x00U) && \
+ ((MODE) != 0x00000000U))
+
+#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
+
+#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
+
+#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \
+ ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE))
+
+#define IS_SMARTCARD_ONE_BIT_SAMPLE(ONEBIT) (((ONEBIT) == SMARTCARD_ONE_BIT_SAMPLE_DISABLE) || \
+ ((ONEBIT) == SMARTCARD_ONE_BIT_SAMPLE_ENABLE))
+
+#define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLE) || \
+ ((NACK) == SMARTCARD_NACK_DISABLE))
+
+#define IS_SMARTCARD_PRESCALER(PRESCALER) (((PRESCALER) >= SMARTCARD_PRESCALER_SYSCLK_DIV2) && \
+ ((PRESCALER) <= SMARTCARD_PRESCALER_SYSCLK_DIV62) )
+
+/** SMARTCARD interruptions flag mask
+ *
+ */
+#define SMARTCARD_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \
+ USART_CR1_IDLEIE | USART_CR3_EIE )
+
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @addtogroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
+ * @{
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc);
+
+/**
+ * @}
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size);
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc);
+
+/**
+ * @}
+ */
+
+/** @addtogroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions
+ * @{
+ */
+
+/* Peripheral State and Errors functions functions *****************************/
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L1xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
