The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_F756ZG/TOOLCHAIN_ARM_MICRO/stm32f7xx_hal_irda.h
- Revision:
- 171:3a7713b1edbc
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TARGET_NUCLEO_F756ZG/TOOLCHAIN_ARM_MICRO/stm32f7xx_hal_irda.h Thu Nov 08 11:45:42 2018 +0000 @@ -0,0 +1,758 @@ +/** + ****************************************************************************** + * @file stm32f7xx_hal_irda.h + * @author MCD Application Team + * @brief Header file of IRDA HAL module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F7xx_HAL_IRDA_H +#define __STM32F7xx_HAL_IRDA_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f7xx_hal_def.h" + +/** @addtogroup STM32F7xx_HAL_Driver + * @{ + */ + +/** @addtogroup IRDA + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Types IRDA Exported Types + * @{ + */ +/** + * @brief IRDA Init Structure definition + */ +typedef struct +{ + uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate. + The baud rate register is computed using the following formula: + Baud Rate Register = ((PCLKx) / ((hirda->Init.BaudRate))) */ + + uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. + This parameter can be a value of @ref IRDAEx_Word_Length */ + + uint32_t Parity; /*!< Specifies the parity mode. + This parameter can be a value of @ref IRDA_Parity + @note When parity is enabled, the computed parity is inserted + at the MSB position of the transmitted data (9th bit when + the word length is set to 9 data bits; 8th bit when the + word length is set to 8 data bits). */ + + uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. + This parameter can be a value of @ref IRDA_Transfer_Mode */ + + uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock + to achieve low-power frequency. + @note Prescaler value 0 is forbidden */ + + uint16_t PowerMode; /*!< Specifies the IRDA power mode. + This parameter can be a value of @ref IRDA_Low_Power */ +}IRDA_InitTypeDef; + +/** + * @brief HAL IRDA State structures definition + * @note HAL IRDA State value is a combination of 2 different substates: gState and RxState. + * - gState contains IRDA state information related to global Handle management + * and also information related to Tx operations. + * gState value coding follow below described bitmap : + * b7-b6 Error information + * 00 : No Error + * 01 : (Not Used) + * 10 : Timeout + * 11 : Error + * b5 IP initilisation status + * 0 : Reset (IP not initialized) + * 1 : Init done (IP not initialized. HAL IRDA Init function already called) + * b4-b3 (not used) + * xx : Should be set to 00 + * b2 Intrinsic process state + * 0 : Ready + * 1 : Busy (IP busy with some configuration or internal operations) + * b1 (not used) + * x : Should be set to 0 + * b0 Tx state + * 0 : Ready (no Tx operation ongoing) + * 1 : Busy (Tx operation ongoing) + * - RxState contains information related to Rx operations. + * RxState value coding follow below described bitmap : + * b7-b6 (not used) + * xx : Should be set to 00 + * b5 IP initilisation status + * 0 : Reset (IP not initialized) + * 1 : Init done (IP not initialized) + * b4-b2 (not used) + * xxx : Should be set to 000 + * b1 Rx state + * 0 : Ready (no Rx operation ongoing) + * 1 : Busy (Rx operation ongoing) + * b0 (not used) + * x : Should be set to 0. + */ +typedef enum +{ + HAL_IRDA_STATE_RESET = 0x00U, /*!< Peripheral is not yet Initialized + Value is allowed for gState and RxState */ + HAL_IRDA_STATE_READY = 0x20U, /*!< Peripheral Initialized and ready for use + Value is allowed for gState and RxState */ + HAL_IRDA_STATE_BUSY = 0x24U, /*!< An internal process is ongoing + Value is allowed for gState only */ + HAL_IRDA_STATE_BUSY_TX = 0x21U, /*!< Data Transmission process is ongoing + Value is allowed for gState only */ + HAL_IRDA_STATE_BUSY_RX = 0x22U, /*!< Data Reception process is ongoing + Value is allowed for RxState only */ + HAL_IRDA_STATE_BUSY_TX_RX = 0x23U, /*!< Data Transmission and Reception process is ongoing + Not to be used for neither gState nor RxState. + Value is result of combination (Or) between gState and RxState values */ + HAL_IRDA_STATE_TIMEOUT = 0xA0U, /*!< Timeout state + Value is allowed for gState only */ + HAL_IRDA_STATE_ERROR = 0xE0U /*!< Error + Value is allowed for gState only */ +}HAL_IRDA_StateTypeDef; + +/** + * @brief IRDA clock sources definition + */ +typedef enum +{ + IRDA_CLOCKSOURCE_PCLK1 = 0x00U, /*!< PCLK1 clock source */ + IRDA_CLOCKSOURCE_PCLK2 = 0x01U, /*!< PCLK2 clock source */ + IRDA_CLOCKSOURCE_HSI = 0x02U, /*!< HSI clock source */ + IRDA_CLOCKSOURCE_SYSCLK = 0x04U, /*!< SYSCLK clock source */ + IRDA_CLOCKSOURCE_LSE = 0x08U, /*!< LSE clock source */ + IRDA_CLOCKSOURCE_UNDEFINED = 0x10 /*!< Undefined clock source */ +}IRDA_ClockSourceTypeDef; + +/** + * @brief IRDA handle Structure definition + */ +typedef struct +{ + USART_TypeDef *Instance; /* IRDA registers base address */ + + IRDA_InitTypeDef Init; /* IRDA communication parameters */ + + uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */ + + uint16_t TxXferSize; /* IRDA Tx Transfer size */ + + __IO uint16_t TxXferCount; /* IRDA Tx Transfer Counter */ + + uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */ + + uint16_t RxXferSize; /* IRDA Rx Transfer size */ + + __IO uint16_t RxXferCount; /* IRDA Rx Transfer Counter */ + + uint16_t Mask; /* IRDA RX RDR register mask */ + + DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */ + + DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */ + + HAL_LockTypeDef Lock; /* Locking object */ + + __IO HAL_IRDA_StateTypeDef gState; /* IRDA state information related to global Handle management + and also related to Tx operations. + This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ + + __IO HAL_IRDA_StateTypeDef RxState; /* IRDA state information related to Rx operations. + This parameter can be a value of @ref HAL_IRDA_StateTypeDef */ + + __IO uint32_t ErrorCode; /* IRDA Error code */ + +}IRDA_HandleTypeDef; + +/** + * @} + */ + +/** + * @brief IRDA Configuration enumeration values definition + */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Constants IRDA Exported constants + * @{ + */ +/** @defgroup IRDA_Error_Code IRDA Error Code + * @brief IRDA Error Code + * @{ + */ + +#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000U) /*!< No error */ +#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001U) /*!< Parity error */ +#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002U) /*!< Noise error */ +#define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004U) /*!< frame error */ +#define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008U) /*!< Overrun error */ +#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010U) /*!< DMA transfer error */ +/** + * @} + */ + +/** @defgroup IRDA_Parity IRDA Parity + * @{ + */ +#define IRDA_PARITY_NONE ((uint32_t)0x0000U) +#define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE) +#define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) +/** + * @} + */ + + +/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode + * @{ + */ +#define IRDA_MODE_RX ((uint32_t)USART_CR1_RE) +#define IRDA_MODE_TX ((uint32_t)USART_CR1_TE) +#define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) +/** + * @} + */ + +/** @defgroup IRDA_Low_Power IRDA Low Power + * @{ + */ +#define IRDA_POWERMODE_NORMAL ((uint32_t)0x0000U) +#define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP) +/** + * @} + */ + + /** @defgroup IRDA_State IRDA State + * @{ + */ +#define IRDA_STATE_DISABLE ((uint32_t)0x0000U) +#define IRDA_STATE_ENABLE ((uint32_t)USART_CR1_UE) +/** + * @} + */ + + /** @defgroup IRDA_Mode IRDA Mode + * @{ + */ +#define IRDA_MODE_DISABLE ((uint32_t)0x0000U) +#define IRDA_MODE_ENABLE ((uint32_t)USART_CR3_IREN) +/** + * @} + */ + +/** @defgroup IRDA_One_Bit IRDA One Bit + * @{ + */ +#define IRDA_ONE_BIT_SAMPLE_DISABLE ((uint32_t)0x00000000U) +#define IRDA_ONE_BIT_SAMPLE_ENABLE ((uint32_t)USART_CR3_ONEBIT) +/** + * @} + */ + +/** @defgroup IRDA_DMA_Tx IRDA DMA Tx + * @{ + */ +#define IRDA_DMA_TX_DISABLE ((uint32_t)0x00000000U) +#define IRDA_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT) +/** + * @} + */ + +/** @defgroup IRDA_DMA_Rx IRDA DMA Rx + * @{ + */ +#define IRDA_DMA_RX_DISABLE ((uint32_t)0x0000U) +#define IRDA_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR) +/** + * @} + */ + +/** @defgroup IRDA_Flags IRDA Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#define IRDA_FLAG_REACK ((uint32_t)0x00400000U) +#define IRDA_FLAG_TEACK ((uint32_t)0x00200000U) +#define IRDA_FLAG_BUSY ((uint32_t)0x00010000U) +#define IRDA_FLAG_ABRF ((uint32_t)0x00008000U) +#define IRDA_FLAG_ABRE ((uint32_t)0x00004000U) +#define IRDA_FLAG_TXE ((uint32_t)0x00000080U) +#define IRDA_FLAG_TC ((uint32_t)0x00000040U) +#define IRDA_FLAG_RXNE ((uint32_t)0x00000020U) +#define IRDA_FLAG_ORE ((uint32_t)0x00000008U) +#define IRDA_FLAG_NE ((uint32_t)0x00000004U) +#define IRDA_FLAG_FE ((uint32_t)0x00000002U) +#define IRDA_FLAG_PE ((uint32_t)0x00000001U) +/** + * @} + */ + +/** @defgroup IRDA_Interrupt_definition IRDA Interrupt definition + * Elements values convention: 0000ZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZ : Flag position in the ISR register(4bits) + * @{ + */ +#define IRDA_IT_PE ((uint16_t)0x0028U) +#define IRDA_IT_TXE ((uint16_t)0x0727U) +#define IRDA_IT_TC ((uint16_t)0x0626U) +#define IRDA_IT_RXNE ((uint16_t)0x0525U) +#define IRDA_IT_IDLE ((uint16_t)0x0424U) + + + +/** Elements values convention: 000000000XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + */ +#define IRDA_IT_ERR ((uint16_t)0x0060U) + +/** Elements values convention: 0000ZZZZ00000000b + * - ZZZZ : Flag position in the ISR register(4bits) + */ +#define IRDA_IT_ORE ((uint16_t)0x0300U) +#define IRDA_IT_NE ((uint16_t)0x0200U) +#define IRDA_IT_FE ((uint16_t)0x0100U) +/** + * @} + */ + +/** @defgroup IRDA_IT_CLEAR_Flags IRDA IT CLEAR Flags + * @{ + */ +#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define IRDA_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */ +#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ +#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +/** + * @} + */ + + + +/** @defgroup IRDA_Request_Parameters IRDA Request Parameters + * @{ + */ +#define IRDA_AUTOBAUD_REQUEST ((uint16_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */ +#define IRDA_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */ +#define IRDA_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */ +/** + * @} + */ + +/** + * @} + */ + + +/* Exported macro ------------------------------------------------------------*/ +/** @defgroup IRDA_Exported_Macros IRDA Exported Macros + * @{ + */ + +/** @brief Reset IRDA handle state + * @param __HANDLE__ specifies the IRDA Handle. + * The Handle Instance which can be USART1 or USART2. + * @retval None + */ +#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET) + +/** @brief Flush the IRDA DR register. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, IRDA_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, IRDA_TXDATA_FLUSH_REQUEST); \ + } while(0) + +/** @brief Clear the specified IRDA pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @param __FLAG__ specifies the flag to check. + * This parameter can be any combination of the following values: + * @arg @ref IRDA_CLEAR_PEF + * @arg @ref IRDA_CLEAR_FEF + * @arg @ref IRDA_CLEAR_NEF + * @arg @ref IRDA_CLEAR_OREF + * @arg @ref IRDA_CLEAR_TCF + * @retval None + */ +#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) + +/** @brief Clear the IRDA PE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_PEF) + + +/** @brief Clear the IRDA FE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_FEF) + +/** @brief Clear the IRDA NE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_NEF) + +/** @brief Clear the IRDA ORE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_OREF) + +/** @brief Clear the IRDA IDLE pending flag. + * @param __HANDLE__ specifies the IRDA Handle. + * @retval None + */ +#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_FLAG((__HANDLE__), IRDA_CLEAR_IDLEF) + +/** @brief Check whether the specified IRDA flag is set or not. + * @param __HANDLE__ specifies the IRDA Handle. + * The Handle Instance which can be USART1 or USART2. + * UART peripheral + * @param __FLAG__ specifies the flag to check. + * This parameter can be one of the following values: + * @arg IRDA_FLAG_REACK: Receive enable acknowledge flag + * @arg IRDA_FLAG_TEACK: Transmit enable acknowledge flag + * @arg IRDA_FLAG_BUSY: Busy flag + * @arg IRDA_FLAG_ABRF: Auto Baud rate detection flag + * @arg IRDA_FLAG_ABRE: Auto Baud rate detection error flag + * @arg IRDA_FLAG_TXE: Transmit data register empty flag + * @arg IRDA_FLAG_TC: Transmission Complete flag + * @arg IRDA_FLAG_RXNE: Receive data register not empty flag + * @arg IRDA_FLAG_IDLE: Idle Line detection flag + * @arg IRDA_FLAG_ORE: OverRun Error flag + * @arg IRDA_FLAG_NE: Noise Error flag + * @arg IRDA_FLAG_FE: Framing Error flag + * @arg IRDA_FLAG_PE: Parity Error flag + * @retval The new state of __FLAG__ (TRUE or FALSE). + */ +#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) + +/** @brief Enable the specified IRDA interrupt. + * @param __HANDLE__ specifies the IRDA Handle. + * The Handle Instance which can be USART1 or USART2. + * UART peripheral + * @param __INTERRUPT__ specifies the IRDA interrupt source to enable. + * This parameter can be one of the following values: + * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt + * @arg IRDA_IT_TC: Transmission complete interrupt + * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt + * @arg IRDA_IT_IDLE: Idle line detection interrupt + * @arg IRDA_IT_PE: Parity Error interrupt + * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5) == 1)? ((__HANDLE__)->Instance->CR1 |= (1 << ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5) == 2)? ((__HANDLE__)->Instance->CR2 |= (1 << ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 |= (1 << ((__INTERRUPT__) & IRDA_IT_MASK)))) + +/** @brief Disable the specified IRDA interrupt. + * @param __HANDLE__ specifies the IRDA Handle. + * The Handle Instance which can be USART1 or USART2. + * @param __INTERRUPT__ specifies the IRDA interrupt source to disable. + * This parameter can be one of the following values: + * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt + * @arg IRDA_IT_TC: Transmission complete interrupt + * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt + * @arg IRDA_IT_IDLE: Idle line detection interrupt + * @arg IRDA_IT_PE: Parity Error interrupt + * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error) + * @retval None + */ +#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((((uint8_t)(__INTERRUPT__)) >> 5) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & IRDA_IT_MASK))): \ + ((__HANDLE__)->Instance->CR3 &= ~ ((uint32_t)1 << ((__INTERRUPT__) & IRDA_IT_MASK)))) + +/** @brief Check whether the specified IRDA interrupt has occurred or not. + * @param __HANDLE__ specifies the IRDA Handle. + * The Handle Instance which can be USART1 or USART2. + * @param __IT__ specifies the IRDA interrupt source to check. + * This parameter can be one of the following values: + * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt + * @arg IRDA_IT_TC: Transmission complete interrupt + * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt + * @arg IRDA_IT_IDLE: Idle line detection interrupt + * @arg IRDA_IT_ORE: OverRun Error interrupt + * @arg IRDA_IT_NE: Noise Error interrupt + * @arg IRDA_IT_FE: Framing Error interrupt + * @arg IRDA_IT_PE: Parity Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_IRDA_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08))) + +/** @brief Check whether the specified IRDA interrupt source is enabled. + * @param __HANDLE__ specifies the IRDA Handle. + * The Handle Instance which can be USART1 or USART2. + * @param __IT__ specifies the IRDA interrupt source to check. + * This parameter can be one of the following values: + * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt + * @arg IRDA_IT_TC: Transmission complete interrupt + * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt + * @arg IRDA_IT_IDLE: Idle line detection interrupt + * @arg IRDA_IT_ORE: OverRun Error interrupt + * @arg IRDA_IT_NE: Noise Error interrupt + * @arg IRDA_IT_FE: Framing Error interrupt + * @arg IRDA_IT_PE: Parity Error interrupt + * @retval The new state of __IT__ (TRUE or FALSE). + */ +#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \ + (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & IRDA_IT_MASK))) + +/** @brief Clear the specified IRDA ISR flag, in setting the proper ICR register flag. + * @param __HANDLE__ specifies the IRDA Handle. + * The Handle Instance which can be USART1 or USART2. + * @param __IT_CLEAR__ specifies the interrupt clear register flag that needs to be set + * to clear the corresponding interrupt + * This parameter can be one of the following values: + * @arg IRDA_CLEAR_PEF: Parity Error Clear Flag + * @arg IRDA_CLEAR_FEF: Framing Error Clear Flag + * @arg IRDA_CLEAR_NEF: Noise detected Clear Flag + * @arg IRDA_CLEAR_OREF: OverRun Error Clear Flag + * @arg IRDA_CLEAR_TCF: Transmission Complete Clear Flag + * @retval None + */ +#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__)) + +/** @brief Set a specific IRDA request flag. + * @param __HANDLE__ specifies the IRDA Handle. + * The Handle Instance which can be USART1 or USART2. + * @param __REQ__ specifies the request flag to set + * This parameter can be one of the following values: + * @arg IRDA_AUTOBAUD_REQUEST: Auto-Baud Rate Request + * @arg IRDA_RXDATA_FLUSH_REQUEST: Receive Data flush Request + * @arg IRDA_TXDATA_FLUSH_REQUEST: Transmit data flush Request + * + * @retval None + */ +#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) + +/** @brief Enable UART/USART associated to IRDA Handle + * @param __HANDLE__ specifies the IRDA Handle. + * The Handle Instance which can be USART1 or USART2. + * @retval None + */ +#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) + +/** @brief Disable UART/USART associated to IRDA Handle + * @param __HANDLE__ specifies the IRDA Handle. + * The Handle Instance which can be USART1 or USART2. + * @retval None + */ +#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) + +/** + * @} + */ + +/* Include IRDA HAL Extension module */ +#include "stm32f7xx_hal_irda_ex.h" + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions + * @{ + */ + +/** @addtogroup IRDA_Exported_Functions_Group1 IrDA Initialization and de-initialization functions + * @{ + */ + +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda); +/** + * @} + */ + +/** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions + * @{ + */ + +/* IO operation functions *****************************************************/ +HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); +HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); +HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda); +/* Transfer Abort functions */ +HAL_StatusTypeDef HAL_IRDA_Abort(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortTransmit(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortReceive(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_Abort_IT(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortTransmit_IT(IRDA_HandleTypeDef *hirda); +HAL_StatusTypeDef HAL_IRDA_AbortReceive_IT(IRDA_HandleTypeDef *hirda); + +void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortCpltCallback (IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortTransmitCpltCallback (IRDA_HandleTypeDef *hirda); +void HAL_IRDA_AbortReceiveCpltCallback (IRDA_HandleTypeDef *hirda); + +/** + * @} + */ + +/** @addtogroup IRDA_Exported_Functions_Group3 Peripheral Control functions + * @{ + */ +/* Peripheral State methods **************************************************/ +HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda); +uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda); +/** + * @} + */ + +/** + * @} + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/* Private constants ---------------------------------------------------------*/ +/** @defgroup IRDA_Private_Constants IRDA Private Constants + * @{ + */ + +/** @defgroup IRDA_Interruption_Mask IRDA Interruption Mask + * @{ + */ +#define IRDA_IT_MASK ((uint16_t)0x001FU) +/** + * @} + */ +/** + * @} + */ + +/* Private macros --------------------------------------------------------*/ +/** @defgroup IRDA_Private_Macros IRDA Private Macros + * @{ + */ + +/** @brief Ensure that IRDA Baud rate is less or equal to maximum value + * @param __BAUDRATE__ specifies the IRDA Baudrate set by the user. + * @retval True or False + */ +#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201) + +/** @brief Ensure that IRDA prescaler value is strictly larger than 0 + * @param __PRESCALER__ specifies the IRDA prescaler value set by the user. + * @retval True or False + */ +#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0) + +#define IS_IRDA_PARITY(__PARITY__) (((__PARITY__) == IRDA_PARITY_NONE) || \ + ((__PARITY__) == IRDA_PARITY_EVEN) || \ + ((__PARITY__) == IRDA_PARITY_ODD)) + +#define IS_IRDA_TX_RX_MODE(__MODE__) ((((__MODE__) & (~((uint32_t)(IRDA_MODE_TX_RX)))) == (uint32_t)0x00) && ((__MODE__) != (uint32_t)0x00U)) + +#define IS_IRDA_POWERMODE(__MODE__) (((__MODE__) == IRDA_POWERMODE_LOWPOWER) || \ + ((__MODE__) == IRDA_POWERMODE_NORMAL)) + +#define IS_IRDA_STATE(__STATE__) (((__STATE__) == IRDA_STATE_DISABLE) || \ + ((__STATE__) == IRDA_STATE_ENABLE)) + +#define IS_IRDA_MODE(__STATE__) (((__STATE__) == IRDA_MODE_DISABLE) || \ + ((__STATE__) == IRDA_MODE_ENABLE)) + +#define IS_IRDA_ONE_BIT_SAMPLE(__ONEBIT__) (((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_DISABLE) || \ + ((__ONEBIT__) == IRDA_ONE_BIT_SAMPLE_ENABLE)) + +#define IS_IRDA_DMA_TX(__DMATX__) (((__DMATX__) == IRDA_DMA_TX_DISABLE) || \ + ((__DMATX__) == IRDA_DMA_TX_ENABLE)) + +#define IS_IRDA_DMA_RX(__DMARX__) (((__DMARX__) == IRDA_DMA_RX_DISABLE) || \ + ((__DMARX__) == IRDA_DMA_RX_ENABLE)) + +#define IS_IRDA_REQUEST_PARAMETER(PARAM) (((PARAM) == IRDA_AUTOBAUD_REQUEST) || \ + ((PARAM) == IRDA_SENDBREAK_REQUEST) || \ + ((PARAM) == IRDA_MUTE_MODE_REQUEST) || \ + ((PARAM) == IRDA_RXDATA_FLUSH_REQUEST) || \ + ((PARAM) == IRDA_TXDATA_FLUSH_REQUEST)) +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ +/** @defgroup IRDA_Private_Functions IRDA Private Functions + * @{ + */ + +/** + * @} + */ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F7xx_HAL_IRDA_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/