Diff: TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_comp.h

Revision:

171:3a7713b1edbc

Parent:

168:b9e159c1930a

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/TOOLCHAIN_IAR/stm32f3xx_hal_comp.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,292 @@
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_hal_comp.h
+  * @author  MCD Application Team
+  * @brief   Header file of COMP HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_COMP_H
+#define __STM32F3xx_HAL_COMP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup COMP
+  * @{
+  */
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup COMP_Exported_Types COMP Exported Types
+  * @{
+  */
+/** 
+  * @brief  COMP Init structure definition  
+  */
+typedef struct
+{
+
+  uint32_t InvertingInput;     /*!< Selects the inverting input of the comparator.
+                                    This parameter can be a value of @ref COMPEx_InvertingInput */
+
+  uint32_t NonInvertingInput;  /*!< Selects the non inverting input of the comparator.
+                                    This parameter can be a value of @ref COMPEx_NonInvertingInput
+                                    Note: Only available on STM32F302xB/xC, STM32F303xB/xC and STM32F358xx devices */
+
+  uint32_t Output;             /*!< Selects the output redirection of the comparator.
+                                    This parameter can be a value of @ref COMPEx_Output */
+
+  uint32_t OutputPol;          /*!< Selects the output polarity of the comparator.
+                                    This parameter can be a value of @ref COMP_OutputPolarity */
+
+  uint32_t Hysteresis;         /*!< Selects the hysteresis voltage of the comparator.
+                                    This parameter can be a value of @ref COMPEx_Hysteresis
+                                    Note: Only available on STM32F302xB/xC, STM32F303xB/xC, STM32F373xB/xC, STM32F358xx and STM32F378xx devices */
+
+  uint32_t BlankingSrce;       /*!< Selects the output blanking source of the comparator.
+                                    This parameter can be a value of @ref COMPEx_BlankingSrce
+                                    Note: Not available on STM32F373xB/C and STM32F378xx devices */
+
+  uint32_t Mode;               /*!< Selects the operating consumption mode of the comparator
+                                    to adjust the speed/consumption.
+                                    This parameter can be a value of @ref COMPEx_Mode
+                                    Note: Not available on STM32F301x6/x8, STM32F302x6/x8, STM32F334x6/x8, STM32F318xx and STM32F328xx devices */
+
+  uint32_t WindowMode;         /*!< Selects the window mode of the comparator X (X=2U, 4 or 6 if available).
+                                    This parameter can be a value of @ref COMPEx_WindowMode */
+  
+  uint32_t TriggerMode;        /*!< Selects the trigger mode of the comparator (interrupt mode).
+                                    This parameter can be a value of @ref COMP_TriggerMode */
+
+}COMP_InitTypeDef;
+
+/** 
+  * @brief  HAL State structures definition
+  */
+typedef enum
+{
+  HAL_COMP_STATE_RESET             = 0x00U,    /*!< COMP not yet initialized or disabled             */
+  HAL_COMP_STATE_READY             = 0x01U,    /*!< COMP initialized and ready for use               */
+  HAL_COMP_STATE_READY_LOCKED      = 0x11U,    /*!< COMP initialized but the configuration is locked */
+  HAL_COMP_STATE_BUSY              = 0x02U,    /*!< COMP is running                                  */
+  HAL_COMP_STATE_BUSY_LOCKED       = 0x12     /*!< COMP is running and the configuration is locked  */
+}HAL_COMP_StateTypeDef;
+
+/** 
+  * @brief  COMP Handle Structure definition
+  */
+typedef struct
+{
+  COMP_TypeDef                *Instance; /*!< Register base address    */
+  COMP_InitTypeDef            Init;      /*!< COMP required parameters */
+  HAL_LockTypeDef             Lock;      /*!< Locking object           */
+  __IO HAL_COMP_StateTypeDef  State;     /*!< COMP communication state */
+}COMP_HandleTypeDef;
+
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup COMP_Exported_Constants COMP Exported Constants
+  * @{
+  */
+
+/** @defgroup COMP_OutputPolarity COMP Output Polarity
+  * @{
+  */
+#define COMP_OUTPUTPOL_NONINVERTED             (0x00000000U)  /*!< COMP output on GPIO isn't inverted */
+#define COMP_OUTPUTPOL_INVERTED                COMP_CSR_COMPxPOL       /*!< COMP output on GPIO is inverted  */
+/**
+  * @}
+  */
+
+/** @defgroup COMP_OutputLevel COMP Output Level
+  * @{
+  */ 
+/* When output polarity is not inverted, comparator output is low when
+   the non-inverting input is at a lower voltage than the inverting input*/
+#define COMP_OUTPUTLEVEL_LOW                   (0x00000000U)
+/* When output polarity is not inverted, comparator output is high when
+   the non-inverting input is at a higher voltage than the inverting input */
+#define COMP_OUTPUTLEVEL_HIGH                  COMP_CSR_COMPxOUT
+/**
+  * @}
+  */
+
+/** @defgroup COMP_TriggerMode COMP Trigger Mode
+  * @{
+  */
+#define COMP_TRIGGERMODE_NONE                 (0x00000000U)   /*!< No External Interrupt trigger detection */
+#define COMP_TRIGGERMODE_IT_RISING            (0x00000001U)   /*!< External Interrupt Mode with Rising edge trigger detection */
+#define COMP_TRIGGERMODE_IT_FALLING           (0x00000002U)   /*!< External Interrupt Mode with Falling edge trigger detection */
+#define COMP_TRIGGERMODE_IT_RISING_FALLING    (0x00000003U)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
+#define COMP_TRIGGERMODE_EVENT_RISING         (0x00000010U)   /*!< Event Mode with Rising edge trigger detection */
+#define COMP_TRIGGERMODE_EVENT_FALLING        (0x00000020U)   /*!< Event Mode with Falling edge trigger detection */
+#define COMP_TRIGGERMODE_EVENT_RISING_FALLING (0x00000030U)   /*!< Event Mode with Rising/Falling edge trigger detection */
+/**
+  * @}
+  */
+
+/** @defgroup COMP_State_Lock COMP State Lock
+  * @{
+  */
+#define COMP_STATE_BIT_LOCK                   (0x00000010U)   /* Lock bit in COMP handle state */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup COMP_Exported_Macros COMP Exported Macros
+  * @{
+  */
+
+/** @brief  Reset COMP handle state.
+  * @param  __HANDLE__  COMP handle.
+  * @retval None
+  */
+#define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__)  ((__HANDLE__)->State = HAL_COMP_STATE_RESET)
+/**
+  * @}
+  */
+
+/* Include COMP HAL Extended module */
+#include "stm32f3xx_hal_comp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup COMP_Exported_Functions
+  * @{
+  */
+/** @addtogroup COMP_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions  ****************************/
+HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp);
+void              HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp);
+void              HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp);
+/**
+ * @}
+ */
+
+/* IO operation functions  *****************************************************/
+/** @addtogroup COMP_Exported_Functions_Group2
+ * @{
+ */
+HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp);
+HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp);
+void              HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp);
+/* Callback in Interrupt mode */
+void              HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp);
+/**
+  * @}
+  */
+
+/* Peripheral Control functions  ************************************************/
+/** @addtogroup COMP_Exported_Functions_Group3
+ * @{
+ */
+HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp);
+uint32_t          HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp);
+/**
+  * @}
+  */
+
+/* Peripheral State functions  **************************************************/
+/** @addtogroup COMP_Exported_Functions_Group4
+  * @{
+  */
+HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp);
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup COMP_Private_Macros COMP Private Macros
+  * @{
+  */
+
+/** @defgroup COMP_IS_COMP_Definitions COMP Private macros to check input parameters
+  * @{
+  */
+
+#define IS_COMP_OUTPUTPOL(__POL__)  (((__POL__) == COMP_OUTPUTPOL_NONINVERTED)  || \
+                                     ((__POL__) == COMP_OUTPUTPOL_INVERTED))
+
+#define IS_COMP_TRIGGERMODE(__MODE__)  (((__MODE__) == COMP_TRIGGERMODE_NONE)                 || \
+                                        ((__MODE__) == COMP_TRIGGERMODE_IT_RISING)            || \
+                                        ((__MODE__) == COMP_TRIGGERMODE_IT_FALLING)           || \
+                                        ((__MODE__) == COMP_TRIGGERMODE_IT_RISING_FALLING)    || \
+                                        ((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING)         || \
+                                        ((__MODE__) == COMP_TRIGGERMODE_EVENT_FALLING)        || \
+                                        ((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING_FALLING))
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_COMP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/