Diff: TARGET_NUCLEO_F303RE/TOOLCHAIN_GCC_ARM/stm32f3xx_ll_pwr.h

Revision:

171:3a7713b1edbc

Parent:

168:b9e159c1930a

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/TOOLCHAIN_GCC_ARM/stm32f3xx_ll_pwr.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,570 @@
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_ll_pwr.h
+  * @author  MCD Application Team
+  * @brief   Header file of PWR LL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_LL_PWR_H
+#define __STM32F3xx_LL_PWR_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx.h"
+
+/** @addtogroup STM32F3xx_LL_Driver
+  * @{
+  */
+
+#if defined(PWR)
+
+/** @defgroup PWR_LL PWR
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Constants PWR Exported Constants
+  * @{
+  */
+
+/** @defgroup PWR_LL_EC_CLEAR_FLAG Clear Flags Defines
+  * @brief    Flags defines which can be used with LL_PWR_WriteReg function
+  * @{
+  */
+#define LL_PWR_CR_CSBF                     PWR_CR_CSBF            /*!< Clear standby flag */
+#define LL_PWR_CR_CWUF                     PWR_CR_CWUF            /*!< Clear wakeup flag */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_LL_EC_GET_FLAG Get Flags Defines
+  * @brief    Flags defines which can be used with LL_PWR_ReadReg function
+  * @{
+  */
+#define LL_PWR_CSR_WUF                     PWR_CSR_WUF            /*!< Wakeup flag */
+#define LL_PWR_CSR_SBF                     PWR_CSR_SBF            /*!< Standby flag */
+#if defined(PWR_PVD_SUPPORT)
+#define LL_PWR_CSR_PVDO                    PWR_CSR_PVDO           /*!< Power voltage detector output flag */
+#endif /* PWR_PVD_SUPPORT */
+#if defined(PWR_CSR_VREFINTRDYF)
+#define LL_PWR_CSR_VREFINTRDYF             PWR_CSR_VREFINTRDYF    /*!< VREFINT ready flag */
+#endif /* PWR_CSR_VREFINTRDYF */
+#define LL_PWR_CSR_EWUP1                   PWR_CSR_EWUP1          /*!< Enable WKUP pin 1 */
+#define LL_PWR_CSR_EWUP2                   PWR_CSR_EWUP2          /*!< Enable WKUP pin 2 */
+#if defined(PWR_CSR_EWUP3)
+#define LL_PWR_CSR_EWUP3                   PWR_CSR_EWUP3          /*!< Enable WKUP pin 3 */
+#endif /* PWR_CSR_EWUP3 */
+/**
+  * @}
+  */
+
+
+/** @defgroup PWR_LL_EC_MODE_PWR Mode Power
+  * @{
+  */
+#define LL_PWR_MODE_STOP_MAINREGU             0x00000000U                    /*!< Enter Stop mode when the CPU enters deepsleep */
+#define LL_PWR_MODE_STOP_LPREGU               (PWR_CR_LPDS)                  /*!< Enter Stop mode (with low power Regulator ON) when the CPU enters deepsleep */
+#define LL_PWR_MODE_STANDBY                   (PWR_CR_PDDS)                  /*!< Enter Standby mode when the CPU enters deepsleep */
+/**
+  * @}
+  */
+
+#if defined(PWR_CR_LPDS)
+/** @defgroup PWR_LL_EC_REGU_MODE_DS_MODE  Regulator Mode In Deep Sleep Mode
+ * @{
+ */
+#define LL_PWR_REGU_DSMODE_MAIN        0x00000000U           /*!< Voltage Regulator in main mode during deepsleep mode */
+#define LL_PWR_REGU_DSMODE_LOW_POWER   (PWR_CR_LPDS)         /*!< Voltage Regulator in low-power mode during deepsleep mode */
+/**
+  * @}
+  */
+#endif /* PWR_CR_LPDS */
+
+#if defined(PWR_PVD_SUPPORT)
+/** @defgroup PWR_LL_EC_PVDLEVEL Power Voltage Detector Level
+  * @{
+  */
+#define LL_PWR_PVDLEVEL_0                  (PWR_CR_PLS_LEV0)      /*!< Voltage threshold detected by PVD 2.2 V */
+#define LL_PWR_PVDLEVEL_1                  (PWR_CR_PLS_LEV1)      /*!< Voltage threshold detected by PVD 2.3 V */
+#define LL_PWR_PVDLEVEL_2                  (PWR_CR_PLS_LEV2)      /*!< Voltage threshold detected by PVD 2.4 V */
+#define LL_PWR_PVDLEVEL_3                  (PWR_CR_PLS_LEV3)      /*!< Voltage threshold detected by PVD 2.5 V */
+#define LL_PWR_PVDLEVEL_4                  (PWR_CR_PLS_LEV4)      /*!< Voltage threshold detected by PVD 2.6 V */
+#define LL_PWR_PVDLEVEL_5                  (PWR_CR_PLS_LEV5)      /*!< Voltage threshold detected by PVD 2.7 V */
+#define LL_PWR_PVDLEVEL_6                  (PWR_CR_PLS_LEV6)      /*!< Voltage threshold detected by PVD 2.8 V */
+#define LL_PWR_PVDLEVEL_7                  (PWR_CR_PLS_LEV7)      /*!< Voltage threshold detected by PVD 2.9 V */
+/**
+  * @}
+  */
+#endif /* PWR_PVD_SUPPORT */
+/** @defgroup PWR_LL_EC_WAKEUP_PIN  Wakeup Pins
+  * @{
+  */
+#define LL_PWR_WAKEUP_PIN1                 (PWR_CSR_EWUP1)        /*!< WKUP pin 1 : PA0 */
+#define LL_PWR_WAKEUP_PIN2                 (PWR_CSR_EWUP2)        /*!< WKUP pin 2 : PC13 */
+#if defined(PWR_CSR_EWUP3)
+#define LL_PWR_WAKEUP_PIN3                 (PWR_CSR_EWUP3)        /*!< WKUP pin 3 : PE6 or PA2 according to device */
+#endif /* PWR_CSR_EWUP3 */
+/**
+  * @}
+  */
+
+/** @defgroup PWR_LL_EC_SDADC_ANALOG_X SDADC Analogx
+  * @{
+  */
+#if defined(SDADC1)
+#define LL_PWR_SDADC_ANALOG1              (PWR_CR_ENSD1)   /*!< Enable SDADC1 */
+#endif /* SDADC1 */
+#if defined(SDADC2)
+#define LL_PWR_SDADC_ANALOG2              (PWR_CR_ENSD2)   /*!< Enable SDADC2 */
+#endif /* SDADC2 */
+#if defined(SDADC3)
+#define LL_PWR_SDADC_ANALOG3              (PWR_CR_ENSD3)   /*!< Enable SDADC3 */
+#endif /* SDADC3 */
+/**
+  * @}
+  */
+/**
+  * @}
+  */
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Macros PWR Exported Macros
+  * @{
+  */
+
+/** @defgroup PWR_LL_EM_WRITE_READ Common write and read registers Macros
+  * @{
+  */
+
+/**
+  * @brief  Write a value in PWR register
+  * @param  __REG__ Register to be written
+  * @param  __VALUE__ Value to be written in the register
+  * @retval None
+  */
+#define LL_PWR_WriteReg(__REG__, __VALUE__) WRITE_REG(PWR->__REG__, (__VALUE__))
+
+/**
+  * @brief  Read a value in PWR register
+  * @param  __REG__ Register to be read
+  * @retval Register value
+  */
+#define LL_PWR_ReadReg(__REG__) READ_REG(PWR->__REG__)
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup PWR_LL_Exported_Functions PWR Exported Functions
+  * @{
+  */
+
+/** @defgroup PWR_LL_EF_Configuration Configuration
+  * @{
+  */
+/**
+  * @brief  Enables the SDADC peripheral functionality
+  * @rmtoll CR   ENSD1       LL_PWR_EnableSDADC\n
+  *         CR   ENSD2       LL_PWR_EnableSDADC\n
+  *         CR   ENSD3       LL_PWR_EnableSDADC
+  * @param  Analogx This parameter can be a combination of the following values:
+  *         @arg @ref LL_PWR_SDADC_ANALOG1
+  *         @arg @ref LL_PWR_SDADC_ANALOG2
+  *         @arg @ref LL_PWR_SDADC_ANALOG3
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_EnableSDADC(uint32_t Analogx)
+{
+  SET_BIT(PWR->CR, Analogx); 
+}
+
+/**
+  * @brief  Disables the SDADC peripheral functionality
+  * @rmtoll CR   ENSD1       LL_PWR_EnableSDADC\n
+  *         CR   ENSD2       LL_PWR_EnableSDADC\n
+  *         CR   ENSD3       LL_PWR_EnableSDADC
+  * @param  Analogx This parameter can be a combination of the following values:
+  *         @arg @ref LL_PWR_SDADC_ANALOG1
+  *         @arg @ref LL_PWR_SDADC_ANALOG2
+  *         @arg @ref LL_PWR_SDADC_ANALOG3
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_DisableSDADC(uint32_t Analogx)
+{
+  CLEAR_BIT(PWR->CR, Analogx);
+}
+
+/**
+  * @brief  Check if SDADCx has been enabled or not
+  * @rmtoll CR   ENSD1       LL_PWR_IsEnabledSDADC\n
+  *         CR   ENSD2       LL_PWR_IsEnabledSDADC\n
+  *         CR   ENSD3       LL_PWR_IsEnabledSDADC
+  * @param  Analogx This parameter can be a combination of the following values:
+  *         @arg @ref LL_PWR_SDADC_ANALOG1
+  *         @arg @ref LL_PWR_SDADC_ANALOG2
+  *         @arg @ref LL_PWR_SDADC_ANALOG3
+  * @retval None
+  */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledSDADC(uint32_t Analogx)
+{
+  return (READ_BIT(PWR->CR, Analogx) == (Analogx));
+}
+
+/**
+  * @brief  Enable access to the backup domain
+  * @rmtoll CR    DBP       LL_PWR_EnableBkUpAccess
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_EnableBkUpAccess(void)
+{
+  SET_BIT(PWR->CR, PWR_CR_DBP);
+}
+
+/**
+  * @brief  Disable access to the backup domain
+  * @rmtoll CR    DBP       LL_PWR_DisableBkUpAccess
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_DisableBkUpAccess(void)
+{
+  CLEAR_BIT(PWR->CR, PWR_CR_DBP);
+}
+
+/**
+  * @brief  Check if the backup domain is enabled
+  * @rmtoll CR    DBP       LL_PWR_IsEnabledBkUpAccess
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledBkUpAccess(void)
+{
+  return (READ_BIT(PWR->CR, PWR_CR_DBP) == (PWR_CR_DBP));
+}
+
+#if defined(PWR_CR_LPDS)
+/**
+  * @brief  Set voltage Regulator mode during deep sleep mode
+  * @rmtoll CR    LPDS         LL_PWR_SetRegulModeDS
+  * @param  RegulMode This parameter can be one of the following values:
+  *         @arg @ref LL_PWR_REGU_DSMODE_MAIN
+  *         @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_SetRegulModeDS(uint32_t RegulMode)
+{
+  MODIFY_REG(PWR->CR, PWR_CR_LPDS, RegulMode);
+}
+
+/**
+  * @brief  Get voltage Regulator mode during deep sleep mode
+  * @rmtoll CR    LPDS         LL_PWR_GetRegulModeDS
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_PWR_REGU_DSMODE_MAIN
+  *         @arg @ref LL_PWR_REGU_DSMODE_LOW_POWER
+  */
+__STATIC_INLINE uint32_t LL_PWR_GetRegulModeDS(void)
+{
+  return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_LPDS));
+}
+#endif /* PWR_CR_LPDS */
+
+/**
+  * @brief  Set Power Down mode when CPU enters deepsleep
+  * @rmtoll CR    PDDS         LL_PWR_SetPowerMode\n
+  * @rmtoll CR    LPDS         LL_PWR_SetPowerMode
+  * @param  PDMode This parameter can be one of the following values:
+  *         @arg @ref LL_PWR_MODE_STOP_MAINREGU
+  *         @arg @ref LL_PWR_MODE_STOP_LPREGU
+  *         @arg @ref LL_PWR_MODE_STANDBY
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_SetPowerMode(uint32_t PDMode)
+{
+  MODIFY_REG(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS), PDMode);
+}
+
+/**
+  * @brief  Get Power Down mode when CPU enters deepsleep
+  * @rmtoll CR    PDDS         LL_PWR_GetPowerMode\n
+  * @rmtoll CR    LPDS         LL_PWR_GetPowerMode
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_PWR_MODE_STOP_MAINREGU
+  *         @arg @ref LL_PWR_MODE_STOP_LPREGU
+  *         @arg @ref LL_PWR_MODE_STANDBY
+  */
+__STATIC_INLINE uint32_t LL_PWR_GetPowerMode(void)
+{
+  return (uint32_t)(READ_BIT(PWR->CR, (PWR_CR_PDDS| PWR_CR_LPDS)));
+}
+
+#if defined(PWR_PVD_SUPPORT)
+/**
+  * @brief  Configure the voltage threshold detected by the Power Voltage Detector
+  * @rmtoll CR    PLS       LL_PWR_SetPVDLevel
+  * @param  PVDLevel This parameter can be one of the following values:
+  *         @arg @ref LL_PWR_PVDLEVEL_0
+  *         @arg @ref LL_PWR_PVDLEVEL_1
+  *         @arg @ref LL_PWR_PVDLEVEL_2
+  *         @arg @ref LL_PWR_PVDLEVEL_3
+  *         @arg @ref LL_PWR_PVDLEVEL_4
+  *         @arg @ref LL_PWR_PVDLEVEL_5
+  *         @arg @ref LL_PWR_PVDLEVEL_6
+  *         @arg @ref LL_PWR_PVDLEVEL_7
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_SetPVDLevel(uint32_t PVDLevel)
+{
+  MODIFY_REG(PWR->CR, PWR_CR_PLS, PVDLevel);
+}
+
+/**
+  * @brief  Get the voltage threshold detection
+  * @rmtoll CR    PLS       LL_PWR_GetPVDLevel
+  * @retval Returned value can be one of the following values:
+  *         @arg @ref LL_PWR_PVDLEVEL_0
+  *         @arg @ref LL_PWR_PVDLEVEL_1
+  *         @arg @ref LL_PWR_PVDLEVEL_2
+  *         @arg @ref LL_PWR_PVDLEVEL_3
+  *         @arg @ref LL_PWR_PVDLEVEL_4
+  *         @arg @ref LL_PWR_PVDLEVEL_5
+  *         @arg @ref LL_PWR_PVDLEVEL_6
+  *         @arg @ref LL_PWR_PVDLEVEL_7
+  */
+__STATIC_INLINE uint32_t LL_PWR_GetPVDLevel(void)
+{
+  return (uint32_t)(READ_BIT(PWR->CR, PWR_CR_PLS));
+}
+
+/**
+  * @brief  Enable Power Voltage Detector
+  * @rmtoll CR    PVDE       LL_PWR_EnablePVD
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_EnablePVD(void)
+{
+  SET_BIT(PWR->CR, PWR_CR_PVDE);
+}
+
+/**
+  * @brief  Disable Power Voltage Detector
+  * @rmtoll CR    PVDE       LL_PWR_DisablePVD
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_DisablePVD(void)
+{
+  CLEAR_BIT(PWR->CR, PWR_CR_PVDE);
+}
+
+/**
+  * @brief  Check if Power Voltage Detector is enabled
+  * @rmtoll CR    PVDE       LL_PWR_IsEnabledPVD
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledPVD(void)
+{
+  return (READ_BIT(PWR->CR, PWR_CR_PVDE) == (PWR_CR_PVDE));
+}
+#endif /* PWR_PVD_SUPPORT */
+
+/**
+  * @brief  Enable the WakeUp PINx functionality
+  * @rmtoll CSR   EWUP1       LL_PWR_EnableWakeUpPin\n
+  * @rmtoll CSR   EWUP2       LL_PWR_EnableWakeUpPin\n
+  * @rmtoll CSR   EWUP3       LL_PWR_EnableWakeUpPin
+  * @param  WakeUpPin This parameter can be one of the following values:
+  *         @arg @ref LL_PWR_WAKEUP_PIN1
+  *         @arg @ref LL_PWR_WAKEUP_PIN2
+  *         @arg @ref LL_PWR_WAKEUP_PIN3 (*)
+  *
+  *         (*) not available on all devices
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_EnableWakeUpPin(uint32_t WakeUpPin)
+{
+  SET_BIT(PWR->CSR, WakeUpPin);
+}
+
+/**
+  * @brief  Disable the WakeUp PINx functionality
+  * @rmtoll CSR   EWUP1       LL_PWR_DisableWakeUpPin\n
+  * @rmtoll CSR   EWUP2       LL_PWR_DisableWakeUpPin\n
+  * @rmtoll CSR   EWUP3       LL_PWR_DisableWakeUpPin
+  * @param  WakeUpPin This parameter can be one of the following values:
+  *         @arg @ref LL_PWR_WAKEUP_PIN1
+  *         @arg @ref LL_PWR_WAKEUP_PIN2
+  *         @arg @ref LL_PWR_WAKEUP_PIN3 (*)
+  *
+  *         (*) not available on all devices
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_DisableWakeUpPin(uint32_t WakeUpPin)
+{
+  CLEAR_BIT(PWR->CSR, WakeUpPin);
+}
+
+/**
+  * @brief  Check if the WakeUp PINx functionality is enabled
+  * @rmtoll CSR   EWUP1       LL_PWR_IsEnabledWakeUpPin\n
+  * @rmtoll CSR   EWUP2       LL_PWR_IsEnabledWakeUpPin\n
+  * @rmtoll CSR   EWUP3       LL_PWR_IsEnabledWakeUpPin
+  * @param  WakeUpPin This parameter can be one of the following values:
+  *         @arg @ref LL_PWR_WAKEUP_PIN1
+  *         @arg @ref LL_PWR_WAKEUP_PIN2
+  *         @arg @ref LL_PWR_WAKEUP_PIN3 (*)
+  *
+  *         (*) not available on all devices
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_PWR_IsEnabledWakeUpPin(uint32_t WakeUpPin)
+{
+  return (READ_BIT(PWR->CSR, WakeUpPin) == (WakeUpPin));
+}
+
+
+/**
+  * @}
+  */
+
+/** @defgroup PWR_LL_EF_FLAG_Management FLAG_Management
+  * @{
+  */
+
+/**
+  * @brief  Get Wake-up Flag
+  * @rmtoll CSR   WUF       LL_PWR_IsActiveFlag_WU
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_WU(void)
+{
+  return (READ_BIT(PWR->CSR, PWR_CSR_WUF) == (PWR_CSR_WUF));
+}
+
+/**
+  * @brief  Get Standby Flag
+  * @rmtoll CSR   SBF       LL_PWR_IsActiveFlag_SB
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_SB(void)
+{
+  return (READ_BIT(PWR->CSR, PWR_CSR_SBF) == (PWR_CSR_SBF));
+}
+
+#if defined(PWR_PVD_SUPPORT)
+/**
+  * @brief  Indicate whether VDD voltage is below the selected PVD threshold
+  * @rmtoll CSR   PVDO       LL_PWR_IsActiveFlag_PVDO
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_PVDO(void)
+{
+  return (READ_BIT(PWR->CSR, PWR_CSR_PVDO) == (PWR_CSR_PVDO));
+}
+#endif /* PWR_PVD_SUPPORT */
+
+#if defined(PWR_CSR_VREFINTRDYF)
+/**
+  * @brief  Get Internal Reference VrefInt Flag
+  * @rmtoll CSR   VREFINTRDYF       LL_PWR_IsActiveFlag_VREFINTRDY
+  * @retval State of bit (1 or 0).
+  */
+__STATIC_INLINE uint32_t LL_PWR_IsActiveFlag_VREFINTRDY(void)
+{
+  return (READ_BIT(PWR->CSR, PWR_CSR_VREFINTRDYF) == (PWR_CSR_VREFINTRDYF));
+}
+#endif /* PWR_CSR_VREFINTRDYF */
+/**
+  * @brief  Clear Standby Flag
+  * @rmtoll CR   CSBF       LL_PWR_ClearFlag_SB
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_ClearFlag_SB(void)
+{
+  SET_BIT(PWR->CR, PWR_CR_CSBF);
+}
+
+/**
+  * @brief  Clear Wake-up Flags
+  * @rmtoll CR   CWUF       LL_PWR_ClearFlag_WU
+  * @retval None
+  */
+__STATIC_INLINE void LL_PWR_ClearFlag_WU(void)
+{
+  SET_BIT(PWR->CR, PWR_CR_CWUF);
+}
+
+/**
+  * @}
+  */
+
+#if defined(USE_FULL_LL_DRIVER)
+/** @defgroup PWR_LL_EF_Init De-initialization function
+  * @{
+  */
+ErrorStatus LL_PWR_DeInit(void);
+/**
+  * @}
+  */
+#endif /* USE_FULL_LL_DRIVER */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* defined(PWR) */
+
+/**
+  * @}
+  */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_LL_PWR_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/