Diff: TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp.h

Revision:

171:3a7713b1edbc

Parent:

168:b9e159c1930a

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F303RE/TOOLCHAIN_ARM_STD/stm32f3xx_hal_opamp.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,507 @@
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_hal_opamp.h
+  * @author  MCD Application Team
+  * @brief   Header file of OPAMP HAL module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_OPAMP_H
+#define __STM32F3xx_HAL_OPAMP_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
+    defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
+    defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+    defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) 
+                  
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup OPAMP
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+/** @defgroup OPAMP_Exported_Types OPAMP Exported Types
+  * @{
+  */
+
+/** 
+  * @brief  OPAMP Init structure definition  
+  */
+  
+typedef struct
+{
+  uint32_t Mode;                        /*!< Specifies the OPAMP mode
+                                             This parameter must be a value of @ref OPAMP_Mode 
+                                             mode is either Standalone, - Follower or PGA */
+                                    
+  uint32_t InvertingInput;              /*!< Specifies the inverting input in Standalone & Pga modes
+                                               - In Standalone mode:   i.e when mode is OPAMP_STANDALONE_MODE
+                                                 This parameter must be a value of @ref OPAMP_InvertingInput 
+                                                 InvertingInput is either VM0 or VM1
+                                               - In PGA mode:          i.e when mode is OPAMP_PGA_MODE
+                                                 & in Follower mode    i.e when mode is OPAMP_FOLLOWER_MODE
+                                                 This parameter is Not Applicable */ 
+
+  uint32_t NonInvertingInput;           /*!< Specifies the non inverting input of the opamp: 
+                                             This parameter must be a value of @ref OPAMP_NonInvertingInput 
+                                             NonInvertingInput is either VP0, VP1, VP2 or VP3 */                                   
+  
+  uint32_t TimerControlledMuxmode;      /*!< Specifies if the Timer controlled Mux mode is enabled or disabled 
+                                             This parameter must be a value of @ref OPAMP_TimerControlledMuxmode */
+
+  uint32_t InvertingInputSecondary;     /*!< Specifies the inverting input (secondary) of the opamp when 
+                                             TimerControlledMuxmode is enabled 
+                                             i.e. when TimerControlledMuxmode is OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE                                             
+                                               - In Standalone mode:   i.e when mode is OPAMP_STANDALONE_MODE
+                                                 This parameter must be a value of @ref OPAMP_InvertingInputSecondary 
+                                                 InvertingInputSecondary is either VM0 or VM1
+                                               - In PGA mode:          i.e when mode is OPAMP_PGA_MODE
+                                                 & in Follower mode    i.e when mode is OPAMP_FOLLOWER_MODE
+                                                 This parameter is Not Applicable */
+  
+  uint32_t NonInvertingInputSecondary;  /*!< Specifies the non inverting input (secondary) of the opamp when 
+                                             TimerControlledMuxmode is enabled 
+                                             i.e. when TimerControlledMuxmode is OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE
+                                             This parameter must be a value of @ref OPAMP_NonInvertingInputSecondary 
+                                             NonInvertingInput is either VP0, VP1, VP2 or VP3 */                                   
+
+  uint32_t PgaConnect;                  /*!< Specifies the inverting pin in PGA mode 
+                                             i.e. when mode is OPAMP_PGA_MODE 
+                                             This parameter must be a value of @ref OPAMP_PgaConnect 
+                                             Either: not connected, connected to VM0, connected to VM1
+                                             (VM0 or VM1 are typically used for external filtering) */
+                                        
+  uint32_t PgaGain;                     /*!< Specifies the gain in PGA mode 
+                                             i.e. when mode is OPAMP_PGA_MODE. 
+                                             This parameter must be a value of @ref OPAMP_PgaGain (2U, 4U, 8 or 16U ) */
+                                                                                     
+  uint32_t UserTrimming;                /*!< Specifies the trimming mode 
+                                             This parameter must be a value of @ref OPAMP_UserTrimming 
+                                             UserTrimming is either factory or user trimming */
+                                        
+  uint32_t TrimmingValueP;              /*!< Specifies the offset trimming value (PMOS)
+                                             i.e. when UserTrimming is OPAMP_TRIMMING_USER. 
+                                             This parameter must be a number between Min_Data = 1 and Max_Data = 31U */
+                                        
+  uint32_t TrimmingValueN;              /*!< Specifies the offset trimming value (NMOS)
+                                             i.e. when UserTrimming is OPAMP_TRIMMING_USER. 
+                                             This parameter must be a number between Min_Data = 1 and Max_Data = 31U */
+  
+}OPAMP_InitTypeDef;
+
+/** 
+  * @brief  HAL State structures definition  
+  */ 
+
+typedef enum
+{
+  HAL_OPAMP_STATE_RESET               = 0x00000000U, /*!< OPMAP is not yet Initialized          */
+  
+  HAL_OPAMP_STATE_READY               = 0x00000001U, /*!< OPAMP is initialized and ready for use */
+  HAL_OPAMP_STATE_CALIBBUSY           = 0x00000002U, /*!< OPAMP is enabled in auto calibration mode */
+ 
+  HAL_OPAMP_STATE_BUSY                = 0x00000004U, /*!< OPAMP is enabled and running in normal mode */                                                                           
+  HAL_OPAMP_STATE_BUSYLOCKED          = 0x00000005U, /*!< OPAMP is locked
+                                                         only system reset allows reconfiguring the opamp. */
+    
+}HAL_OPAMP_StateTypeDef;
+
+/** 
+  * @brief OPAMP Handle Structure definition to @brief  OPAMP Handle Structure definition 
+  */ 
+typedef struct
+{
+  OPAMP_TypeDef       *Instance;                    /*!< OPAMP instance's registers base address   */
+  OPAMP_InitTypeDef   Init;                         /*!< OPAMP required parameters */
+  HAL_StatusTypeDef Status;                         /*!< OPAMP peripheral status   */
+  HAL_LockTypeDef   Lock;                           /*!< Locking object          */
+  __IO HAL_OPAMP_StateTypeDef  State;               /*!< OPAMP communication state */
+  
+} OPAMP_HandleTypeDef;
+
+/** 
+  * @brief OPAMP_TrimmingValueTypeDef @brief   definition 
+  */ 
+
+typedef  uint32_t OPAMP_TrimmingValueTypeDef;
+/**
+  * @}
+  */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup OPAMP_Exported_Constants OPAMP Exported Constants
+  * @{
+  */
+
+/** @defgroup OPAMP_CSR_INIT OPAMP CSR init register Mask 
+  * @{
+  */
+/* Used for Init phase */
+#define OPAMP_CSR_UPDATE_PARAMETERS_INIT_MASK (OPAMP_CSR_TRIMOFFSETN | OPAMP_CSR_TRIMOFFSETP \
+                                          | OPAMP_CSR_USERTRIM | OPAMP_CSR_PGGAIN | OPAMP_CSR_VPSSEL \
+                                          | OPAMP_CSR_VMSSEL | OPAMP_CSR_TCMEN | OPAMP_CSR_VPSEL \
+                                          | OPAMP_CSR_VMSEL | OPAMP_CSR_FORCEVP)
+
+/**
+  * @}
+  */         
+
+/** @defgroup OPAMP_Mode OPAMP Mode
+  * @{
+  */
+#define OPAMP_STANDALONE_MODE            (0x00000000U) /*!< standalone mode */
+#define OPAMP_PGA_MODE                   OPAMP_CSR_VMSEL_1      /*!< PGA mode */
+#define OPAMP_FOLLOWER_MODE              OPAMP_CSR_VMSEL        /*!< follower mode */
+
+
+#define IS_OPAMP_FUNCTIONAL_NORMALMODE(INPUT) (((INPUT) == OPAMP_STANDALONE_MODE) || \
+                                               ((INPUT) == OPAMP_PGA_MODE) || \
+                                               ((INPUT) == OPAMP_FOLLOWER_MODE))
+    
+/**
+  * @}
+  */                                        
+                                                                             
+/** @defgroup OPAMP_NonInvertingInput OPAMP Non Inverting Input
+  * @{
+  */
+
+#define OPAMP_NONINVERTINGINPUT_IO0         OPAMP_CSR_VPSEL         /*!< VP0 (PA1 for OPAMP1, VP0 PA7  for OPAMP2, VP0 PB0  for OPAMP3, VP0 PB13 for OPAMP4)
+                                                                                  connected to OPAMPx non inverting input */
+#define OPAMP_NONINVERTINGINPUT_IO1         (0x00000000U)  /*!< VP1 (PA7 for OPAMP1, VP3 PD14 for OPAMP2, VP1 PB13 for OPAMP3, VP1 PD11 for OPAMP4)
+                                                                                  connected to OPAMPx non inverting input */
+#define OPAMP_NONINVERTINGINPUT_IO2         OPAMP_CSR_VPSEL_1       /*!< VP2 (PA3 for OPAMP1, VP2 PB0  for OPAMP2, VP2 PA1  for OPAMP3, VP3 PA4  for OPAMP4)
+                                                                                  connected to OPAMPx non inverting input */
+#define OPAMP_NONINVERTINGINPUT_IO3         OPAMP_CSR_VPSEL_0       /*!< VP3 (PA5 for OPAMP1, VP1 PB14 for OPAMP2, VP3 PA5  for OPAMP3, VP2 PB11 for OPAMP4)
+                                                                                  connected to OPAMPx non inverting input */
+
+#define IS_OPAMP_NONINVERTING_INPUT(INPUT) (((INPUT) == OPAMP_NONINVERTINGINPUT_IO0) || \
+                                            ((INPUT) == OPAMP_NONINVERTINGINPUT_IO1) || \
+                                            ((INPUT) == OPAMP_NONINVERTINGINPUT_IO2) || \
+                                            ((INPUT) == OPAMP_NONINVERTINGINPUT_IO3))
+
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_InvertingInput OPAMP Inverting Input
+  * @{
+  */
+
+#define OPAMP_INVERTINGINPUT_IO0       (0x00000000U)            /*!< inverting input connected to VM0 */
+#define OPAMP_INVERTINGINPUT_IO1         OPAMP_CSR_VMSEL_0           /*!< inverting input connected to VM1 */
+
+#define IS_OPAMP_INVERTING_INPUT(INPUT) (((INPUT) == OPAMP_INVERTINGINPUT_IO0) || \
+                                         ((INPUT) == OPAMP_INVERTINGINPUT_IO1))
+
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_TimerControlledMuxmode OPAMP Timer Controlled Mux mode
+  * @{
+  */
+ #define OPAMP_TIMERCONTROLLEDMUXMODE_DISABLE (0x00000000U)    /*!< Timer controlled Mux mode disabled */
+ #define OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE  OPAMP_CSR_TCMEN           /*!< Timer controlled Mux mode enabled */
+ 
+ #define IS_OPAMP_TIMERCONTROLLED_MUXMODE(MUXMODE) (((MUXMODE) == OPAMP_TIMERCONTROLLEDMUXMODE_DISABLE) || \
+                                                    ((MUXMODE) == OPAMP_TIMERCONTROLLEDMUXMODE_ENABLE))
+/**
+  * @}
+  */
+
+ /** @defgroup OPAMP_NonInvertingInputSecondary OPAMP Non Inverting Input Secondary
+  * @{
+  */
+
+#define OPAMP_SEC_NONINVERTINGINPUT_IO0          OPAMP_CSR_VPSSEL       /*!< VP0 (PA1 for OPAMP1, PA7 for OPAMP2, PB0 for OPAMP3, PB13 for OPAMP4)    
+                                                                              connected to OPAMPx non inverting input */                              
+#define OPAMP_SEC_NONINVERTINGINPUT_IO1          (0x00000000U) /*!< VP1 (PA7 for OPAMP1, PD14 for OPAMP2, PB13 for OPAMP3, PD11 for OPAMP4)  
+                                                                             connected to OPAMPx non inverting input */                               
+#define OPAMP_SEC_NONINVERTINGINPUT_IO2          OPAMP_CSR_VPSSEL_1     /*!< VP2 (PA3 for OPAMP1, PB0 for OPAMP2, PA1 for OPAMP3, PA4 for OPAMP4)     
+                                                                              connected to OPAMPx non inverting input */                              
+#define OPAMP_SEC_NONINVERTINGINPUT_IO3          OPAMP_CSR_VPSSEL_0     /*!< VP3 (PA5 for OPAMP1, PB14 for OPAMP2, PA5 for OPAMP3, PB11 for OPAMP4)   
+                                                                              connected to OPAMPx non inverting input */                              
+
+#define IS_OPAMP_SEC_NONINVERTINGINPUT(INPUT) (((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_IO0) || \
+                                               ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_IO1) || \
+                                               ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_IO2) || \
+                                               ((INPUT) == OPAMP_SEC_NONINVERTINGINPUT_IO3))
+                                            
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_InvertingInputSecondary OPAMP Inverting Input Secondary
+  * @{
+  */
+
+#define OPAMP_SEC_INVERTINGINPUT_IO0          (0x00000000U)    /*!< VM0 (PC5 for OPAMP1 and OPAMP2, PB10 for OPAMP3 and OPAMP4)
+                                                                          connected to OPAMPx inverting input */
+#define OPAMP_SEC_INVERTINGINPUT_IO1          OPAMP_CSR_VMSSEL         /*!< VM1 (PA3 for OPAMP1, PA5 for OPAMP2, PB2 for OPAMP3, PD8 for OPAMP4)
+                                                                         connected to OPAMPx inverting input */
+
+#define IS_OPAMP_SEC_INVERTINGINPUT(INPUT) (((INPUT) == OPAMP_SEC_INVERTINGINPUT_IO0) || \
+                                             ((INPUT) == OPAMP_SEC_INVERTINGINPUT_IO1))
+
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_PgaConnect OPAMP Pga Connect
+  * @{
+  */
+
+#define OPAMP_PGA_CONNECT_INVERTINGINPUT_NO               (0x00000000U)                    /*!< In PGA mode, the non inverting input is not connected */
+#define OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0               OPAMP_CSR_PGGAIN_3                       /*!< In PGA mode, the non inverting input is connected to VM0 */
+#define OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1              (OPAMP_CSR_PGGAIN_2 | OPAMP_CSR_PGGAIN_3) /*!< In PGA mode, the non inverting input is connected to VM1 */
+
+#define IS_OPAMP_PGACONNECT(CONNECT) (((CONNECT) == OPAMP_PGA_CONNECT_INVERTINGINPUT_NO)  || \
+                                      ((CONNECT) == OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0) || \
+                                      ((CONNECT) == OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1))
+/**
+  * @}
+  */
+
+
+/** @defgroup OPAMP_PgaGain OPAMP Pga Gain
+  * @{
+  */
+
+#define OPAMP_PGA_GAIN_2                (0x00000000U)                        /*!< PGA gain =  2 */
+#define OPAMP_PGA_GAIN_4                OPAMP_CSR_PGGAIN_0                            /*!< PGA gain =  4 */
+#define OPAMP_PGA_GAIN_8                OPAMP_CSR_PGGAIN_1                            /*!< PGA gain =  8 */
+#define OPAMP_PGA_GAIN_16              (OPAMP_CSR_PGGAIN_0 | OPAMP_CSR_PGGAIN_1)      /*!< PGA gain = 16 */
+
+#define IS_OPAMP_PGA_GAIN(GAIN) (((GAIN) == OPAMP_PGA_GAIN_2) || \
+                                 ((GAIN) == OPAMP_PGA_GAIN_4) || \
+                                 ((GAIN) == OPAMP_PGA_GAIN_8) || \
+                                 ((GAIN) == OPAMP_PGA_GAIN_16))
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_UserTrimming OPAMP User Trimming
+  * @{
+  */
+
+#define OPAMP_TRIMMING_FACTORY        (0x00000000U)                          /*!< Factory trimming */
+#define OPAMP_TRIMMING_USER           OPAMP_CSR_USERTRIM                              /*!< User trimming */
+
+#define IS_OPAMP_TRIMMING(TRIMMING) (((TRIMMING) == OPAMP_TRIMMING_FACTORY) || \
+                                     ((TRIMMING) == OPAMP_TRIMMING_USER))
+
+/** @defgroup OPAMP_FactoryTrimming OPAMP Factory Trimming
+  * @{
+  */
+
+#define OPAMP_FACTORYTRIMMING_DUMMY    (0xFFFFFFFFU)                          /*!< Dummy trimming value */
+
+#define OPAMP_FACTORYTRIMMING_N        (0x00000000U)                          /*!< Offset trimming N */
+#define OPAMP_FACTORYTRIMMING_P        (0x00000001U)                          /*!< Offset trimming P */
+
+#define IS_OPAMP_FACTORYTRIMMING(TRIMMING) (((TRIMMING) == OPAMP_FACTORYTRIMMING_N) || \
+                                             ((TRIMMING) == OPAMP_FACTORYTRIMMING_P))
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup OPAMP_TrimmingValue OPAMP Trimming Value
+  * @{
+  */
+
+#define IS_OPAMP_TRIMMINGVALUE(TRIMMINGVALUE) ((TRIMMINGVALUE) <= 0x1FU)
+
+
+/**
+  * @}
+  */ 
+
+
+/** @defgroup OPAMP_Input OPAMP Input
+  * @{
+  */
+
+#define OPAMP_INPUT_INVERTING                 ( 24U) /*!< Inverting input */
+#define OPAMP_INPUT_NONINVERTING              ( 19U) /*!< Non inverting input */
+
+#define IS_OPAMP_INPUT(INPUT) (((INPUT) == OPAMP_INPUT_INVERTING) || \
+                               ((INPUT) == OPAMP_INPUT_NONINVERTING))
+/**
+  * @}
+  */
+
+
+/** @defgroup OPAMP_VREF OPAMP VREF
+  * @{
+  */
+
+#define OPAMP_VREF_3VDDA                    (0x00000000U)  /*!< OPMAP Vref = 3.3U% VDDA */
+#define OPAMP_VREF_10VDDA                    OPAMP_CSR_CALSEL_0     /*!< OPMAP Vref = 10U% VDDA  */
+#define OPAMP_VREF_50VDDA                    OPAMP_CSR_CALSEL_1     /*!< OPMAP Vref = 50U% VDDA  */
+#define OPAMP_VREF_90VDDA                    OPAMP_CSR_CALSEL       /*!< OPMAP Vref = 90U% VDDA  */
+
+#define IS_OPAMP_VREF(VREF) (((VREF) == OPAMP_VREF_3VDDA)  || \
+                             ((VREF) == OPAMP_VREF_10VDDA) || \
+                             ((VREF) == OPAMP_VREF_50VDDA) || \
+                             ((VREF) == OPAMP_VREF_90VDDA))
+
+/**
+  * @}
+  */ 
+
+ /** @defgroup OPAMP_Vref2ADCforCalib OPAMP Vref2ADCforCalib
+  */
+ 
+#define OPAMP_VREF_NOTCONNECTEDTO_ADC          (0x00000000U) /*!< VREF not connected to ADC */
+#define OPAMP_VREF_CONNECTEDTO_ADC             (0x00000001U) /*!< VREF not connected to ADC */
+    
+#define IS_OPAMP_ALLOPAMPVREF_CONNECT(CONNECT) (((CONNECT) == OPAMP_VREF_NOTCONNECTEDTO_ADC) || \
+                                                ((CONNECT) == OPAMP_VREF_CONNECTEDTO_ADC))
+    
+
+ /**
+  * @}
+  */ 
+    
+ /**
+  * @}
+  */ 
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup OPAMP_Exported_Macros OPAMP Exported Macros
+  * @{
+  */
+
+/** @brief Reset OPAMP handle state
+  * @param  __HANDLE__ OPAMP handle.
+  * @retval None
+  */
+#define __HAL_OPAMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_OPAMP_STATE_RESET)
+
+/**
+  * @}
+  */ 
+
+/* Include OPAMP HAL Extended module */
+#include "stm32f3xx_hal_opamp_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup OPAMP_Exported_Functions OPAMP Exported Functions
+  * @{
+  */
+
+/** @defgroup OPAMP_Exported_Functions_Group1 Initialization and de-initialization functions
+  * @{
+  */
+
+/* Initialization/de-initialization functions  **********************************/
+HAL_StatusTypeDef HAL_OPAMP_Init(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_DeInit (OPAMP_HandleTypeDef *hopamp);
+void HAL_OPAMP_MspInit(OPAMP_HandleTypeDef *hopamp);
+void HAL_OPAMP_MspDeInit(OPAMP_HandleTypeDef *hopamp);
+/**
+  * @}
+  */
+
+
+/** @defgroup OPAMP_Exported_Functions_Group2 Input and Output operation functions 
+  * @{
+  */
+
+/* I/O operation functions  *****************************************************/
+HAL_StatusTypeDef HAL_OPAMP_Start(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_Stop(OPAMP_HandleTypeDef *hopamp);
+HAL_StatusTypeDef HAL_OPAMP_SelfCalibrate(OPAMP_HandleTypeDef *hopamp); 
+
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_Exported_Functions_Group3 Peripheral Control functions 
+  * @{
+  */
+
+/* Peripheral Control functions  ************************************************/
+HAL_StatusTypeDef HAL_OPAMP_Lock(OPAMP_HandleTypeDef *hopamp); 
+
+/**
+  * @}
+  */
+
+/** @defgroup OPAMP_Exported_Functions_Group4 Peripheral State functions 
+  * @{
+  */
+
+/* Peripheral State functions  **************************************************/
+HAL_OPAMP_StateTypeDef HAL_OPAMP_GetState(OPAMP_HandleTypeDef *hopamp);
+OPAMP_TrimmingValueTypeDef HAL_OPAMP_GetTrimOffset (OPAMP_HandleTypeDef *hopamp, uint32_t trimmingoffset);
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */ 
+
+#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
+       /* STM32F302xC || STM32F303xC || STM32F358xx || */
+       /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+       /* STM32F301x8 || STM32F302x8 || STM32F318xx    */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F3xx_HAL_OPAMP_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/