mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_F207ZG/TOOLCHAIN_GCC_ARM/stm32f2xx_ll_bus.h
- Revision:
- 171:3a7713b1edbc
- Parent:
- 145:64910690c574
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F207ZG/TOOLCHAIN_GCC_ARM/stm32f2xx_ll_bus.h Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,1538 @@
+/**
+ ******************************************************************************
+ * @file stm32f2xx_ll_bus.h
+ * @author MCD Application Team
+ * @version V1.2.1
+ * @date 14-April-2017
+ * @brief Header file of BUS LL module.
+
+ @verbatim
+ ##### RCC Limitations #####
+ ==============================================================================
+ [..]
+ A delay between an RCC peripheral clock enable and the effective peripheral
+ enabling should be taken into account in order to manage the peripheral read/write
+ from/to registers.
+ (+) This delay depends on the peripheral mapping.
+ (++) AHB & APB peripherals, 1 dummy read is necessary
+
+ [..]
+ Workarounds:
+ (#) For AHB & APB peripherals, a dummy read to the peripheral register has been
+ inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F2xx_LL_BUS_H
+#define __STM32F2xx_LL_BUS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f2xx.h"
+
+/** @addtogroup STM32F2xx_LL_Driver
+ * @{
+ */
+
+#if defined(RCC)
+
+/** @defgroup BUS_LL BUS
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
+ * @{
+ */
+
+/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB1_GRP1_PERIPH_ALL 0xFFFFFFFFU
+#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHB1ENR_GPIOAEN
+#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHB1ENR_GPIOBEN
+#define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHB1ENR_GPIOCEN
+#define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHB1ENR_GPIODEN
+#define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHB1ENR_GPIOEEN
+#define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHB1ENR_GPIOFEN
+#define LL_AHB1_GRP1_PERIPH_GPIOG RCC_AHB1ENR_GPIOGEN
+#define LL_AHB1_GRP1_PERIPH_GPIOH RCC_AHB1ENR_GPIOHEN
+#define LL_AHB1_GRP1_PERIPH_GPIOI RCC_AHB1ENR_GPIOIEN
+#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHB1ENR_CRCEN
+#define LL_AHB1_GRP1_PERIPH_BKPSRAM RCC_AHB1ENR_BKPSRAMEN
+#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHB1ENR_DMA1EN
+#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHB1ENR_DMA2EN
+#if defined(ETH)
+#define LL_AHB1_GRP1_PERIPH_ETHMAC RCC_AHB1ENR_ETHMACEN
+#define LL_AHB1_GRP1_PERIPH_ETHMACTX RCC_AHB1ENR_ETHMACTXEN
+#define LL_AHB1_GRP1_PERIPH_ETHMACRX RCC_AHB1ENR_ETHMACRXEN
+#define LL_AHB1_GRP1_PERIPH_ETHMACPTP RCC_AHB1ENR_ETHMACPTPEN
+#endif /* ETH */
+#define LL_AHB1_GRP1_PERIPH_OTGHS RCC_AHB1ENR_OTGHSEN
+#define LL_AHB1_GRP1_PERIPH_OTGHSULPI RCC_AHB1ENR_OTGHSULPIEN
+#define LL_AHB1_GRP1_PERIPH_FLITF RCC_AHB1LPENR_FLITFLPEN
+#define LL_AHB1_GRP1_PERIPH_SRAM1 RCC_AHB1LPENR_SRAM1LPEN
+#define LL_AHB1_GRP1_PERIPH_SRAM2 RCC_AHB1LPENR_SRAM2LPEN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_AHB2_GRP1_PERIPH AHB2 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB2_GRP1_PERIPH_ALL 0xFFFFFFFFU
+#if defined(DCMI)
+#define LL_AHB2_GRP1_PERIPH_DCMI RCC_AHB2ENR_DCMIEN
+#endif /* DCMI */
+#if defined(CRYP)
+#define LL_AHB2_GRP1_PERIPH_CRYP RCC_AHB2ENR_CRYPEN
+#endif /* CRYP */
+#if defined(HASH)
+#define LL_AHB2_GRP1_PERIPH_HASH RCC_AHB2ENR_HASHEN
+#endif /* HASH */
+#define LL_AHB2_GRP1_PERIPH_RNG RCC_AHB2ENR_RNGEN
+#define LL_AHB2_GRP1_PERIPH_OTGFS RCC_AHB2ENR_OTGFSEN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_AHB3_GRP1_PERIPH AHB3 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB3_GRP1_PERIPH_ALL 0xFFFFFFFFU
+#define LL_AHB3_GRP1_PERIPH_FSMC RCC_AHB3ENR_FSMCEN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
+ * @{
+ */
+#define LL_APB1_GRP1_PERIPH_ALL 0xFFFFFFFFU
+#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN
+#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN
+#define LL_APB1_GRP1_PERIPH_TIM4 RCC_APB1ENR_TIM4EN
+#define LL_APB1_GRP1_PERIPH_TIM5 RCC_APB1ENR_TIM5EN
+#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN
+#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN
+#define LL_APB1_GRP1_PERIPH_TIM12 RCC_APB1ENR_TIM12EN
+#define LL_APB1_GRP1_PERIPH_TIM13 RCC_APB1ENR_TIM13EN
+#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN
+#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN
+#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN
+#define LL_APB1_GRP1_PERIPH_SPI3 RCC_APB1ENR_SPI3EN
+#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN
+#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN
+#define LL_APB1_GRP1_PERIPH_UART4 RCC_APB1ENR_UART4EN
+#define LL_APB1_GRP1_PERIPH_UART5 RCC_APB1ENR_UART5EN
+#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN
+#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN
+#define LL_APB1_GRP1_PERIPH_I2C3 RCC_APB1ENR_I2C3EN
+#define LL_APB1_GRP1_PERIPH_CAN1 RCC_APB1ENR_CAN1EN
+#define LL_APB1_GRP1_PERIPH_CAN2 RCC_APB1ENR_CAN2EN
+#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN
+#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_APB2_GRP1_PERIPH APB2 GRP1 PERIPH
+ * @{
+ */
+#define LL_APB2_GRP1_PERIPH_ALL 0xFFFFFFFFU
+#define LL_APB2_GRP1_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
+#define LL_APB2_GRP1_PERIPH_TIM8 RCC_APB2ENR_TIM8EN
+#define LL_APB2_GRP1_PERIPH_USART1 RCC_APB2ENR_USART1EN
+#define LL_APB2_GRP1_PERIPH_USART6 RCC_APB2ENR_USART6EN
+#define LL_APB2_GRP1_PERIPH_ADC1 RCC_APB2ENR_ADC1EN
+#define LL_APB2_GRP1_PERIPH_ADC2 RCC_APB2ENR_ADC2EN
+#define LL_APB2_GRP1_PERIPH_ADC3 RCC_APB2ENR_ADC3EN
+#define LL_APB2_GRP1_PERIPH_SDIO RCC_APB2ENR_SDIOEN
+#define LL_APB2_GRP1_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
+#define LL_APB2_GRP1_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN
+#define LL_APB2_GRP1_PERIPH_TIM9 RCC_APB2ENR_TIM9EN
+#define LL_APB2_GRP1_PERIPH_TIM10 RCC_APB2ENR_TIM10EN
+#define LL_APB2_GRP1_PERIPH_TIM11 RCC_APB2ENR_TIM11EN
+#define LL_APB2_GRP1_PERIPH_ADC RCC_APB2RSTR_ADCRST
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
+ * @{
+ */
+
+/** @defgroup BUS_LL_EF_AHB1 AHB1
+ * @{
+ */
+
+/**
+ * @brief Enable AHB1 peripherals clock.
+ * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOBEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOCEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIODEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOEEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOFEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOGEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOHEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR GPIOIEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR CRCEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR DMA1EN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR DMA2EN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR ETHMACEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR OTGHSEN LL_AHB1_GRP1_EnableClock\n
+ * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB1ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB1ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB1 peripheral clock is enabled or not
+ * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOGEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOHEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR GPIOIEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR ETHMACEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR OTGHSEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHB1ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB1 peripherals clock.
+ * @rmtoll AHB1ENR GPIOAEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOBEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOCEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIODEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOEEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOFEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOGEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOHEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR GPIOIEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR CRCEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR BKPSRAMEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR DMA1EN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR DMA2EN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR ETHMACEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR ETHMACTXEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR ETHMACRXEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR ETHMACPTPEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR OTGHSEN LL_AHB1_GRP1_DisableClock\n
+ * AHB1ENR OTGHSULPIEN LL_AHB1_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB1ENR, Periphs);
+}
+
+/**
+ * @brief Force AHB1 peripherals reset.
+ * @rmtoll AHB1RSTR GPIOARST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIODRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOERST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOGRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOHRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR GPIOIRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR CRCRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR DMA1RST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR DMA2RST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR ETHMACRST LL_AHB1_GRP1_ForceReset\n
+ * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHB1RSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB1 peripherals reset.
+ * @rmtoll AHB1RSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOGRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOHRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR GPIOIRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR CRCRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR DMA1RST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR DMA2RST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR ETHMACRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHB1RSTR OTGHSRST LL_AHB1_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB1RSTR, Periphs);
+}
+
+/**
+ * @brief Enable AHB1 peripheral clocks in low-power mode
+ * @rmtoll AHB1LPENR GPIOALPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOBLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOCLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIODLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOELPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOFLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOGLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOHLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR GPIOILPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR CRCLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR FLITFLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR SRAM1LPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR SRAM2LPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR DMA1LPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR ETHMACLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR ETHMACTXLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR ETHMACRXLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR ETHMACPTPLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_EnableClockLowPower\n
+ * AHB1LPENR OTGHSULPILPEN LL_AHB1_GRP1_EnableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLITF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_EnableClockLowPower(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB1LPENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB1LPENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable AHB1 peripheral clocks in low-power mode
+ * @rmtoll AHB1LPENR GPIOALPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOBLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOCLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIODLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOELPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOFLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOGLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOHLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR GPIOILPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR CRCLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR FLITFLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR SRAM1LPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR SRAM2LPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR BKPSRAMLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR DMA1LPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR DMA2LPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR ETHMACLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR ETHMACTXLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR ETHMACRXLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR ETHMACPTPLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR OTGHSLPEN LL_AHB1_GRP1_DisableClockLowPower\n
+ * AHB1LPENR OTGHSULPILPEN LL_AHB1_GRP1_DisableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOG
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOI
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_BKPSRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLITF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMAC (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACTX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACRX (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ETHMACPTP (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHS
+ * @arg @ref LL_AHB1_GRP1_PERIPH_OTGHSULPI
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_DisableClockLowPower(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB1LPENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_AHB2 AHB2
+ * @{
+ */
+
+/**
+ * @brief Enable AHB2 peripherals clock.
+ * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR CRYPEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR HASHEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR RNGEN LL_AHB2_GRP1_EnableClock\n
+ * AHB2ENR OTGFSEN LL_AHB2_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB2ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB2ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB2 peripheral clock is enabled or not
+ * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR CRYPEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR HASHEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR RNGEN LL_AHB2_GRP1_IsEnabledClock\n
+ * AHB2ENR OTGFSEN LL_AHB2_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB2_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHB2ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB2 peripherals clock.
+ * @rmtoll AHB2ENR DCMIEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR CRYPEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR HASHEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR RNGEN LL_AHB2_GRP1_DisableClock\n
+ * AHB2ENR OTGFSEN LL_AHB2_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB2ENR, Periphs);
+}
+
+/**
+ * @brief Force AHB2 peripherals reset.
+ * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR CRYPRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR HASHRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR RNGRST LL_AHB2_GRP1_ForceReset\n
+ * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHB2RSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB2 peripherals reset.
+ * @rmtoll AHB2RSTR DCMIRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR CRYPRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR HASHRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR RNGRST LL_AHB2_GRP1_ReleaseReset\n
+ * AHB2RSTR OTGFSRST LL_AHB2_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB2RSTR, Periphs);
+}
+
+/**
+ * @brief Enable AHB2 peripheral clocks in low-power mode
+ * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_EnableClockLowPower\n
+ * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_EnableClockLowPower\n
+ * AHB2LPENR HASHLPEN LL_AHB2_GRP1_EnableClockLowPower\n
+ * AHB2LPENR RNGLPEN LL_AHB2_GRP1_EnableClockLowPower\n
+ * AHB2LPENR OTGFSLPEN LL_AHB2_GRP1_EnableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_EnableClockLowPower(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB2LPENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB2LPENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable AHB2 peripheral clocks in low-power mode
+ * @rmtoll AHB2LPENR DCMILPEN LL_AHB2_GRP1_DisableClockLowPower\n
+ * AHB2LPENR CRYPLPEN LL_AHB2_GRP1_DisableClockLowPower\n
+ * AHB2LPENR HASHLPEN LL_AHB2_GRP1_DisableClockLowPower\n
+ * AHB2LPENR RNGLPEN LL_AHB2_GRP1_DisableClockLowPower\n
+ * AHB2LPENR OTGFSLPEN LL_AHB2_GRP1_DisableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_DCMI (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_CRYP (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_HASH (*)
+ * @arg @ref LL_AHB2_GRP1_PERIPH_RNG
+ * @arg @ref LL_AHB2_GRP1_PERIPH_OTGFS
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB2_GRP1_DisableClockLowPower(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB2LPENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_AHB3 AHB3
+ * @{
+ */
+
+/**
+ * @brief Enable AHB3 peripherals clock.
+ * @rmtoll AHB3ENR FSMCEN LL_AHB3_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB3ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB3ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB3 peripheral clock is enabled or not
+ * @rmtoll AHB3ENR FSMCEN LL_AHB3_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB3_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHB3ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB3 peripherals clock.
+ * @rmtoll AHB3ENR FSMCEN LL_AHB3_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB3ENR, Periphs);
+}
+
+/**
+ * @brief Force AHB3 peripherals reset.
+ * @rmtoll AHB3RSTR FSMCRST LL_AHB3_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHB3RSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB3 peripherals reset.
+ * @rmtoll AHB3RSTR FSMCRST LL_AHB3_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB3RSTR, Periphs);
+}
+
+/**
+ * @brief Enable AHB3 peripheral clocks in low-power mode
+ * @rmtoll AHB3LPENR FSMCLPEN LL_AHB3_GRP1_EnableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_EnableClockLowPower(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHB3LPENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHB3LPENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable AHB3 peripheral clocks in low-power mode
+ * @rmtoll AHB3LPENR FSMCLPEN LL_AHB3_GRP1_DisableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB3_GRP1_PERIPH_FSMC
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB3_GRP1_DisableClockLowPower(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHB3LPENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_APB1 APB1
+ * @{
+ */
+
+/**
+ * @brief Enable APB1 peripherals clock.
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM4EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM5EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM12EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM13EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR SPI3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR UART4EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR UART5EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR I2C3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR CAN1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR CAN2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR DACEN LL_APB1_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN2
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if APB1 peripheral clock is enabled or not
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM4EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM5EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM12EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM13EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR SPI3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR UART4EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR UART5EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR I2C3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR CAN1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR CAN2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN2
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable APB1 peripherals clock.
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM4EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM5EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM12EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM13EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR SPI3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR UART4EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR UART5EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR I2C3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR CAN1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR CAN2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR DACEN LL_APB1_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN2
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1ENR, Periphs);
+}
+
+/**
+ * @brief Force APB1 peripherals reset.
+ * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM4RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM5RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM12RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM13RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR SPI3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR UART4RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR UART5RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR I2C3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR CAN1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR CAN2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR DACRST LL_APB1_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN2
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB1RSTR, Periphs);
+}
+
+/**
+ * @brief Release APB1 peripherals reset.
+ * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM4RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM5RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM12RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM13RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR SPI3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR UART4RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR UART5RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR I2C3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR CAN1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR CAN2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN2
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1RSTR, Periphs);
+}
+
+/**
+ * @brief Enable APB1 peripheral clocks in low-power mode
+ * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM3LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM4LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM5LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM6LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM7LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM12LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM13LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR TIM14LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR WWDGLPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR SPI2LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR SPI3LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR USART2LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR USART3LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR UART4LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR UART5LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR I2C1LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR I2C2LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR I2C3LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR CAN1LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR CAN2LPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR PWRLPEN LL_APB1_GRP1_EnableClockLowPower\n
+ * APB1LPENR DACLPEN LL_APB1_GRP1_EnableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN2
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_EnableClockLowPower(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1LPENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1LPENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable APB1 peripheral clocks in low-power mode
+ * @rmtoll APB1LPENR TIM2LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM3LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM4LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM5LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM6LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM7LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM12LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM13LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR TIM14LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR WWDGLPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR SPI2LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR SPI3LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR USART2LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR USART3LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR UART4LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR UART5LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR I2C1LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR I2C2LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR I2C3LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR CAN1LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR CAN2LPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR PWRLPEN LL_APB1_GRP1_DisableClockLowPower\n
+ * APB1LPENR DACLPEN LL_APB1_GRP1_DisableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM4
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM5
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM12
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM13
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI3
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART4
+ * @arg @ref LL_APB1_GRP1_PERIPH_UART5
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C3
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN1
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN2
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_DisableClockLowPower(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1LPENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_APB2 APB2
+ * @{
+ */
+
+/**
+ * @brief Enable APB2 peripherals clock.
+ * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR USART6EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR ADC1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR ADC2EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR ADC3EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SDIOEN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR SYSCFGEN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM9EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM10EN LL_APB2_GRP1_EnableClock\n
+ * APB2ENR TIM11EN LL_APB2_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART6
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC2
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC3
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDIO
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM9
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM10
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM11
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB2ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if APB2 peripheral clock is enabled or not
+ * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR USART6EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR ADC1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR ADC2EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR ADC3EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SDIOEN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR SYSCFGEN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM9EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM10EN LL_APB2_GRP1_IsEnabledClock\n
+ * APB2ENR TIM11EN LL_APB2_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART6
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC2
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC3
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDIO
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM9
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM10
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM11
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB2_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable APB2 peripherals clock.
+ * @rmtoll APB2ENR TIM1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM8EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR USART1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR USART6EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR ADC1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR ADC2EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR ADC3EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SDIOEN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SPI1EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR SYSCFGEN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM9EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM10EN LL_APB2_GRP1_DisableClock\n
+ * APB2ENR TIM11EN LL_APB2_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART6
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC2
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC3
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDIO
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM9
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM10
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM11
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2ENR, Periphs);
+}
+
+/**
+ * @brief Force APB2 peripherals reset.
+ * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM8RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR USART1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR USART6RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR ADCRST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SDIORST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SPI1RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR SYSCFGRST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM9RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM10RST LL_APB2_GRP1_ForceReset\n
+ * APB2RSTR TIM11RST LL_APB2_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART6
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDIO
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM9
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM10
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM11
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB2RSTR, Periphs);
+}
+
+/**
+ * @brief Release APB2 peripherals reset.
+ * @rmtoll APB2RSTR TIM1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM8RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR USART1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR USART6RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR ADCRST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SDIORST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SPI1RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR SYSCFGRST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM9RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM10RST LL_APB2_GRP1_ReleaseReset\n
+ * APB2RSTR TIM11RST LL_APB2_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART6
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDIO
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM9
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM10
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM11
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2RSTR, Periphs);
+}
+
+/**
+ * @brief Enable APB2 peripheral clocks in low-power mode
+ * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR TIM8LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR USART1LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR USART6LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR ADC1LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR ADC2LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR ADC3LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR SDIOLPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR SPI1LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR SYSCFGLPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR TIM9LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR TIM10LPEN LL_APB2_GRP1_EnableClockLowPower\n
+ * APB2LPENR TIM11LPEN LL_APB2_GRP1_EnableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART6
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC2
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC3
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDIO
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM9
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM10
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM11
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_EnableClockLowPower(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB2LPENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB2LPENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Disable APB2 peripheral clocks in low-power mode
+ * @rmtoll APB2LPENR TIM1LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR TIM8LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR USART1LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR USART6LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR ADC1LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR ADC2LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR ADC3LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR SDIOLPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR SPI1LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR SYSCFGLPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR TIM9LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR TIM10LPEN LL_APB2_GRP1_DisableClockLowPower\n
+ * APB2LPENR TIM11LPEN LL_APB2_GRP1_DisableClockLowPower
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM1
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM8
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART1
+ * @arg @ref LL_APB2_GRP1_PERIPH_USART6
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC1
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC2
+ * @arg @ref LL_APB2_GRP1_PERIPH_ADC3
+ * @arg @ref LL_APB2_GRP1_PERIPH_SDIO
+ * @arg @ref LL_APB2_GRP1_PERIPH_SPI1
+ * @arg @ref LL_APB2_GRP1_PERIPH_SYSCFG
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM9
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM10
+ * @arg @ref LL_APB2_GRP1_PERIPH_TIM11
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB2_GRP1_DisableClockLowPower(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2LPENR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(RCC) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F2xx_LL_BUS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
