mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_ll_bus.h
- Revision:
- 171:3a7713b1edbc
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F030R8/TOOLCHAIN_IAR/stm32f0xx_ll_bus.h Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,861 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_ll_bus.h
+ * @author MCD Application Team
+ * @brief Header file of BUS LL module.
+
+ @verbatim
+ ##### RCC Limitations #####
+ ==============================================================================
+ [..]
+ A delay between an RCC peripheral clock enable and the effective peripheral
+ enabling should be taken into account in order to manage the peripheral read/write
+ from/to registers.
+ (+) This delay depends on the peripheral mapping.
+ (++) AHB & APB peripherals, 1 dummy read is necessary
+
+ [..]
+ Workarounds:
+ (#) For AHB & APB peripherals, a dummy read to the peripheral register has been
+ inserted in each LL_{BUS}_GRP{x}_EnableClock() function.
+
+ @endverbatim
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_LL_BUS_H
+#define __STM32F0xx_LL_BUS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx.h"
+
+/** @addtogroup STM32F0xx_LL_Driver
+ * @{
+ */
+
+#if defined(RCC)
+
+/** @defgroup BUS_LL BUS
+ * @{
+ */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+
+/* Private constants ---------------------------------------------------------*/
+
+/* Private macros ------------------------------------------------------------*/
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup BUS_LL_Exported_Constants BUS Exported Constants
+ * @{
+ */
+
+/** @defgroup BUS_LL_EC_AHB1_GRP1_PERIPH AHB1 GRP1 PERIPH
+ * @{
+ */
+#define LL_AHB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_AHB1_GRP1_PERIPH_DMA1 RCC_AHBENR_DMA1EN
+#if defined(DMA2)
+#define LL_AHB1_GRP1_PERIPH_DMA2 RCC_AHBENR_DMA2EN
+#endif /*DMA2*/
+#define LL_AHB1_GRP1_PERIPH_SRAM RCC_AHBENR_SRAMEN
+#define LL_AHB1_GRP1_PERIPH_FLASH RCC_AHBENR_FLITFEN
+#define LL_AHB1_GRP1_PERIPH_CRC RCC_AHBENR_CRCEN
+#define LL_AHB1_GRP1_PERIPH_GPIOA RCC_AHBENR_GPIOAEN
+#define LL_AHB1_GRP1_PERIPH_GPIOB RCC_AHBENR_GPIOBEN
+#define LL_AHB1_GRP1_PERIPH_GPIOC RCC_AHBENR_GPIOCEN
+#if defined(GPIOD)
+#define LL_AHB1_GRP1_PERIPH_GPIOD RCC_AHBENR_GPIODEN
+#endif /*GPIOD*/
+#if defined(GPIOE)
+#define LL_AHB1_GRP1_PERIPH_GPIOE RCC_AHBENR_GPIOEEN
+#endif /*GPIOE*/
+#define LL_AHB1_GRP1_PERIPH_GPIOF RCC_AHBENR_GPIOFEN
+#if defined(TSC)
+#define LL_AHB1_GRP1_PERIPH_TSC RCC_AHBENR_TSCEN
+#endif /*TSC*/
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_APB1_GRP1_PERIPH APB1 GRP1 PERIPH
+ * @{
+ */
+#define LL_APB1_GRP1_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#if defined(TIM2)
+#define LL_APB1_GRP1_PERIPH_TIM2 RCC_APB1ENR_TIM2EN
+#endif /*TIM2*/
+#define LL_APB1_GRP1_PERIPH_TIM3 RCC_APB1ENR_TIM3EN
+#if defined(TIM6)
+#define LL_APB1_GRP1_PERIPH_TIM6 RCC_APB1ENR_TIM6EN
+#endif /*TIM6*/
+#if defined(TIM7)
+#define LL_APB1_GRP1_PERIPH_TIM7 RCC_APB1ENR_TIM7EN
+#endif /*TIM7*/
+#define LL_APB1_GRP1_PERIPH_TIM14 RCC_APB1ENR_TIM14EN
+#define LL_APB1_GRP1_PERIPH_WWDG RCC_APB1ENR_WWDGEN
+#if defined(SPI2)
+#define LL_APB1_GRP1_PERIPH_SPI2 RCC_APB1ENR_SPI2EN
+#endif /*SPI2*/
+#if defined(USART2)
+#define LL_APB1_GRP1_PERIPH_USART2 RCC_APB1ENR_USART2EN
+#endif /* USART2 */
+#if defined(USART3)
+#define LL_APB1_GRP1_PERIPH_USART3 RCC_APB1ENR_USART3EN
+#endif /* USART3 */
+#if defined(USART4)
+#define LL_APB1_GRP1_PERIPH_USART4 RCC_APB1ENR_USART4EN
+#endif /* USART4 */
+#if defined(USART5)
+#define LL_APB1_GRP1_PERIPH_USART5 RCC_APB1ENR_USART5EN
+#endif /* USART5 */
+#define LL_APB1_GRP1_PERIPH_I2C1 RCC_APB1ENR_I2C1EN
+#if defined(I2C2)
+#define LL_APB1_GRP1_PERIPH_I2C2 RCC_APB1ENR_I2C2EN
+#endif /*I2C2*/
+#if defined(USB)
+#define LL_APB1_GRP1_PERIPH_USB RCC_APB1ENR_USBEN
+#endif /* USB */
+#if defined(CAN)
+#define LL_APB1_GRP1_PERIPH_CAN RCC_APB1ENR_CANEN
+#endif /*CAN*/
+#if defined(CRS)
+#define LL_APB1_GRP1_PERIPH_CRS RCC_APB1ENR_CRSEN
+#endif /*CRS*/
+#define LL_APB1_GRP1_PERIPH_PWR RCC_APB1ENR_PWREN
+#if defined(DAC)
+#define LL_APB1_GRP1_PERIPH_DAC1 RCC_APB1ENR_DACEN
+#endif /*DAC*/
+#if defined(CEC)
+#define LL_APB1_GRP1_PERIPH_CEC RCC_APB1ENR_CECEN
+#endif /*CEC*/
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EC_APB1_GRP2_PERIPH APB1 GRP2 PERIPH
+ * @{
+ */
+#define LL_APB1_GRP2_PERIPH_ALL (uint32_t)0xFFFFFFFFU
+#define LL_APB1_GRP2_PERIPH_SYSCFG RCC_APB2ENR_SYSCFGEN
+#define LL_APB1_GRP2_PERIPH_ADC1 RCC_APB2ENR_ADC1EN
+#if defined(USART8)
+#define LL_APB1_GRP2_PERIPH_USART8 RCC_APB2ENR_USART8EN
+#endif /*USART8*/
+#if defined(USART7)
+#define LL_APB1_GRP2_PERIPH_USART7 RCC_APB2ENR_USART7EN
+#endif /*USART7*/
+#if defined(USART6)
+#define LL_APB1_GRP2_PERIPH_USART6 RCC_APB2ENR_USART6EN
+#endif /*USART6*/
+#define LL_APB1_GRP2_PERIPH_TIM1 RCC_APB2ENR_TIM1EN
+#define LL_APB1_GRP2_PERIPH_SPI1 RCC_APB2ENR_SPI1EN
+#define LL_APB1_GRP2_PERIPH_USART1 RCC_APB2ENR_USART1EN
+#if defined(TIM15)
+#define LL_APB1_GRP2_PERIPH_TIM15 RCC_APB2ENR_TIM15EN
+#endif /*TIM15*/
+#define LL_APB1_GRP2_PERIPH_TIM16 RCC_APB2ENR_TIM16EN
+#define LL_APB1_GRP2_PERIPH_TIM17 RCC_APB2ENR_TIM17EN
+#define LL_APB1_GRP2_PERIPH_DBGMCU RCC_APB2ENR_DBGMCUEN
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions --------------------------------------------------------*/
+/** @defgroup BUS_LL_Exported_Functions BUS Exported Functions
+ * @{
+ */
+
+/** @defgroup BUS_LL_EF_AHB1 AHB1
+ * @{
+ */
+
+/**
+ * @brief Enable AHB1 peripherals clock.
+ * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR DMA2EN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR SRAMEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR FLITFEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR CRCEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOAEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOBEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOCEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIODEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOEEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR GPIOFEN LL_AHB1_GRP1_EnableClock\n
+ * AHBENR TSCEN LL_AHB1_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->AHBENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->AHBENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if AHB1 peripheral clock is enabled or not
+ * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR DMA2EN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR SRAMEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR FLITFEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR CRCEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOAEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOBEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOCEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIODEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOEEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR GPIOFEN LL_AHB1_GRP1_IsEnabledClock\n
+ * AHBENR TSCEN LL_AHB1_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_AHB1_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->AHBENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable AHB1 peripherals clock.
+ * @rmtoll AHBENR DMA1EN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR DMA2EN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR SRAMEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR FLITFEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR CRCEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOAEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOBEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOCEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIODEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOEEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR GPIOFEN LL_AHB1_GRP1_DisableClock\n
+ * AHBENR TSCEN LL_AHB1_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA1
+ * @arg @ref LL_AHB1_GRP1_PERIPH_DMA2 (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_SRAM
+ * @arg @ref LL_AHB1_GRP1_PERIPH_FLASH
+ * @arg @ref LL_AHB1_GRP1_PERIPH_CRC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHBENR, Periphs);
+}
+
+/**
+ * @brief Force AHB1 peripherals reset.
+ * @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOBRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOCRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIODRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOERST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR GPIOFRST LL_AHB1_GRP1_ForceReset\n
+ * AHBRSTR TSCRST LL_AHB1_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->AHBRSTR, Periphs);
+}
+
+/**
+ * @brief Release AHB1 peripherals reset.
+ * @rmtoll AHBRSTR GPIOARST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOBRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOCRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIODRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOERST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR GPIOFRST LL_AHB1_GRP1_ReleaseReset\n
+ * AHBRSTR TSCRST LL_AHB1_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_AHB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOA
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOB
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOC
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOD (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOE (*)
+ * @arg @ref LL_AHB1_GRP1_PERIPH_GPIOF
+ * @arg @ref LL_AHB1_GRP1_PERIPH_TSC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_AHB1_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->AHBRSTR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_APB1_GRP1 APB1 GRP1
+ * @{
+ */
+
+/**
+ * @brief Enable APB1 peripherals clock (available in register 1).
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USART4EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USART5EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR USBEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR CANEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR CRSEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR DACEN LL_APB1_GRP1_EnableClock\n
+ * APB1ENR CECEN LL_APB1_GRP1_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB1ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB1ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if APB1 peripheral clock is enabled or not (available in register 1).
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USART4EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USART5EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR USBEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR CANEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR CRSEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR DACEN LL_APB1_GRP1_IsEnabledClock\n
+ * APB1ENR CECEN LL_APB1_GRP1_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB1_GRP1_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB1ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable APB1 peripherals clock (available in register 1).
+ * @rmtoll APB1ENR TIM2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM6EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM7EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR TIM14EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR WWDGEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR SPI2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USART2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USART3EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USART4EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USART5EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR I2C1EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR I2C2EN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR USBEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR CANEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR CRSEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR PWREN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR DACEN LL_APB1_GRP1_DisableClock\n
+ * APB1ENR CECEN LL_APB1_GRP1_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1ENR, Periphs);
+}
+
+/**
+ * @brief Force APB1 peripherals reset (available in register 1).
+ * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM6RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM7RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR TIM14RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR WWDGRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR SPI2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USART2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USART3RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USART4RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USART5RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR I2C1RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR I2C2RST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR USBRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR CANRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR CRSRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR PWRRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR DACRST LL_APB1_GRP1_ForceReset\n
+ * APB1RSTR CECRST LL_APB1_GRP1_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB1RSTR, Periphs);
+}
+
+/**
+ * @brief Release APB1 peripherals reset (available in register 1).
+ * @rmtoll APB1RSTR TIM2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM6RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM7RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR TIM14RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR WWDGRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR SPI2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USART2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USART3RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USART4RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USART5RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR I2C1RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR I2C2RST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR USBRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR CANRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR CRSRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR PWRRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR DACRST LL_APB1_GRP1_ReleaseReset\n
+ * APB1RSTR CECRST LL_APB1_GRP1_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP1_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM3
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM6 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM7 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_TIM14
+ * @arg @ref LL_APB1_GRP1_PERIPH_WWDG
+ * @arg @ref LL_APB1_GRP1_PERIPH_SPI2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART3 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART4 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USART5 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C1
+ * @arg @ref LL_APB1_GRP1_PERIPH_I2C2 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_USB (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CAN (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CRS (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_PWR
+ * @arg @ref LL_APB1_GRP1_PERIPH_DAC1 (*)
+ * @arg @ref LL_APB1_GRP1_PERIPH_CEC (*)
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP1_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB1RSTR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+/** @defgroup BUS_LL_EF_APB1_GRP2 APB1 GRP2
+ * @{
+ */
+
+/**
+ * @brief Enable APB1 peripherals clock (available in register 2).
+ * @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR ADC1EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR USART8EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR USART7EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR USART6EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR TIM1EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR SPI1EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR USART1EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR TIM15EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR TIM16EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR TIM17EN LL_APB1_GRP2_EnableClock\n
+ * APB2ENR DBGMCUEN LL_APB1_GRP2_EnableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
+ * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
+ * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_EnableClock(uint32_t Periphs)
+{
+ __IO uint32_t tmpreg;
+ SET_BIT(RCC->APB2ENR, Periphs);
+ /* Delay after an RCC peripheral clock enabling */
+ tmpreg = READ_BIT(RCC->APB2ENR, Periphs);
+ (void)tmpreg;
+}
+
+/**
+ * @brief Check if APB1 peripheral clock is enabled or not (available in register 2).
+ * @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR ADC1EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR USART8EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR USART7EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR USART6EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR TIM1EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR SPI1EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR USART1EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR TIM15EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR TIM16EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR TIM17EN LL_APB1_GRP2_IsEnabledClock\n
+ * APB2ENR DBGMCUEN LL_APB1_GRP2_IsEnabledClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
+ * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
+ * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
+ *
+ * (*) value not defined in all devices.
+ * @retval State of Periphs (1 or 0).
+*/
+__STATIC_INLINE uint32_t LL_APB1_GRP2_IsEnabledClock(uint32_t Periphs)
+{
+ return (READ_BIT(RCC->APB2ENR, Periphs) == Periphs);
+}
+
+/**
+ * @brief Disable APB1 peripherals clock (available in register 2).
+ * @rmtoll APB2ENR SYSCFGEN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR ADC1EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR USART8EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR USART7EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR USART6EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR TIM1EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR SPI1EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR USART1EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR TIM15EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR TIM16EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR TIM17EN LL_APB1_GRP2_DisableClock\n
+ * APB2ENR DBGMCUEN LL_APB1_GRP2_DisableClock
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
+ * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
+ * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_DisableClock(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2ENR, Periphs);
+}
+
+/**
+ * @brief Force APB1 peripherals reset (available in register 2).
+ * @rmtoll APB2RSTR SYSCFGRST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR ADC1RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR USART8RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR USART7RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR USART6RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR TIM1RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR SPI1RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR USART1RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR TIM15RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR TIM16RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR TIM17RST LL_APB1_GRP2_ForceReset\n
+ * APB2RSTR DBGMCURST LL_APB1_GRP2_ForceReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
+ * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
+ * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_ForceReset(uint32_t Periphs)
+{
+ SET_BIT(RCC->APB2RSTR, Periphs);
+}
+
+/**
+ * @brief Release APB1 peripherals reset (available in register 2).
+ * @rmtoll APB2RSTR SYSCFGRST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR ADC1RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR USART8RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR USART7RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR USART6RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR TIM1RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR SPI1RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR USART1RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR TIM15RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR TIM16RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR TIM17RST LL_APB1_GRP2_ReleaseReset\n
+ * APB2RSTR DBGMCURST LL_APB1_GRP2_ReleaseReset
+ * @param Periphs This parameter can be a combination of the following values:
+ * @arg @ref LL_APB1_GRP2_PERIPH_ALL
+ * @arg @ref LL_APB1_GRP2_PERIPH_SYSCFG
+ * @arg @ref LL_APB1_GRP2_PERIPH_ADC1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART8 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART7 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART6 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM1
+ * @arg @ref LL_APB1_GRP2_PERIPH_SPI1
+ * @arg @ref LL_APB1_GRP2_PERIPH_USART1
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM15 (*)
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM16
+ * @arg @ref LL_APB1_GRP2_PERIPH_TIM17
+ * @arg @ref LL_APB1_GRP2_PERIPH_DBGMCU
+ *
+ * (*) value not defined in all devices.
+ * @retval None
+*/
+__STATIC_INLINE void LL_APB1_GRP2_ReleaseReset(uint32_t Periphs)
+{
+ CLEAR_BIT(RCC->APB2RSTR, Periphs);
+}
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* defined(RCC) */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_LL_BUS_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
