mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_MOTE_L152RC/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_adc_ex.h
- Revision:
- 171:3a7713b1edbc
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MOTE_L152RC/TOOLCHAIN_GCC_ARM/stm32l1xx_hal_adc_ex.h Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,588 @@
+/**
+ ******************************************************************************
+ * @file stm32l1xx_hal_adc_ex.h
+ * @author MCD Application Team
+ * @brief Header file of ADC HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L1xx_HAL_ADC_EX_H
+#define __STM32L1xx_HAL_ADC_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l1xx_hal_def.h"
+
+/** @addtogroup STM32L1xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup ADCEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup ADCEx_Exported_Types ADCEx Exported Types
+ * @{
+ */
+
+/**
+ * @brief ADC Configuration injected Channel structure definition
+ * @note Parameters of this structure are shared within 2 scopes:
+ * - Scope channel: InjectedChannel, InjectedRank, InjectedSamplingTime, InjectedOffset
+ * - Scope injected group (affects all channels of injected group): InjectedNbrOfConversion, InjectedDiscontinuousConvMode,
+ * AutoInjectedConv, ExternalTrigInjecConvEdge, ExternalTrigInjecConv.
+ * @note The setting of these parameters with function HAL_ADCEx_InjectedConfigChannel() is conditioned to ADC state.
+ * ADC state can be either:
+ * - For all parameters: ADC disabled
+ * - For all except parameters 'InjectedDiscontinuousConvMode' and 'AutoInjectedConv': ADC enabled without conversion on going on injected group.
+ * - For parameters 'ExternalTrigInjecConv' and 'ExternalTrigInjecConvEdge': ADC enabled, even with conversion on going on injected group.
+ */
+typedef struct
+{
+ uint32_t InjectedChannel; /*!< Selection of ADC channel to configure
+ This parameter can be a value of @ref ADC_channels
+ Note: Depending on devices, some channels may not be available on package pins. Refer to device datasheet for channels availability. */
+ uint32_t InjectedRank; /*!< Rank in the injected group sequencer
+ This parameter must be a value of @ref ADCEx_injected_rank
+ Note: In case of need to disable a channel or change order of conversion sequencer, rank containing a previous channel setting can be overwritten by the new channel setting (or parameter number of conversions can be adjusted) */
+ uint32_t InjectedSamplingTime; /*!< Sampling time value to be set for the selected channel.
+ Unit: ADC clock cycles
+ Conversion time is the addition of sampling time and processing time (12 ADC clock cycles at ADC resolution 12 bits, 11 cycles at 10 bits, 9 cycles at 8 bits, 7 cycles at 6 bits).
+ This parameter can be a value of @ref ADC_sampling_times
+ Caution: This parameter updates the parameter property of the channel, that can be used into regular and/or injected groups.
+ If this same channel has been previously configured in the other group (regular/injected), it will be updated to last setting.
+ Note: In case of usage of internal measurement channels (VrefInt/Vbat/TempSensor),
+ sampling time constraints must be respected (sampling time can be adjusted in function of ADC clock frequency and sampling time setting)
+ Refer to device datasheet for timings values, parameters TS_vrefint, TS_temp (values rough order: 4us min). */
+ uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data (for channels set on injected group only).
+ Offset value must be a positive number.
+ Depending of ADC resolution selected (12, 10, 8 or 6 bits),
+ this parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF, 0x3FF, 0xFF or 0x3F respectively. */
+ uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ranks that will be converted within the injected group sequencer.
+ To use the injected group sequencer and convert several ranks, parameter 'ScanConvMode' must be enabled.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 4.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversions sequence of injected group is performed in Complete-sequence/Discontinuous-sequence (main sequence subdivided in successive parts).
+ Discontinuous mode is used only if sequencer is enabled (parameter 'ScanConvMode'). If sequencer is disabled, this parameter is discarded.
+ Discontinuous mode can be enabled only if continuous mode is disabled. If continuous mode is enabled, this parameter setting is discarded.
+ This parameter can be set to ENABLE or DISABLE.
+ Note: For injected group, number of discontinuous ranks increment is fixed to one-by-one.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group conversion after regular one
+ This parameter can be set to ENABLE or DISABLE.
+ Note: To use Automatic injected conversion, discontinuous mode must be disabled ('DiscontinuousConvMode' and 'InjectedDiscontinuousConvMode' set to DISABLE)
+ Note: To use Automatic injected conversion, injected group external triggers must be disabled ('ExternalTrigInjecConv' set to ADC_SOFTWARE_START)
+ Note: In case of DMA used with regular group: if DMA configured in normal mode (single shot) JAUTO will be stopped upon DMA transfer complete.
+ To maintain JAUTO always enabled, DMA must be configured in circular mode.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t ExternalTrigInjecConv; /*!< Selects the external event used to trigger the conversion start of injected group.
+ If set to ADC_INJECTED_SOFTWARE_START, external triggers are disabled.
+ If set to external trigger source, triggering is on event rising edge.
+ This parameter can be a value of @ref ADCEx_External_trigger_source_Injected
+ Note: This parameter must be modified when ADC is disabled (before ADC start conversion or after ADC stop conversion).
+ If ADC is enabled, this parameter setting is bypassed without error reporting (as it can be the expected behaviour in case of another parameter update on the fly)
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+ uint32_t ExternalTrigInjecConvEdge; /*!< Selects the external trigger edge of injected group.
+ This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected.
+ If trigger is set to ADC_INJECTED_SOFTWARE_START, this parameter is discarded.
+ Caution: this setting impacts the entire injected group. Therefore, call of HAL_ADCEx_InjectedConfigChannel() to
+ configure a channel on injected group can impact the configuration of other channels previously set. */
+}ADC_InjectionConfTypeDef;
+/**
+ * @}
+ */
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup ADCEx_Exported_Constants ADCEx Exported Constants
+ * @{
+ */
+
+/** @defgroup ADCEx_injected_rank ADCEx rank into injected group
+ * @{
+ */
+#define ADC_INJECTED_RANK_1 (0x00000001U)
+#define ADC_INJECTED_RANK_2 (0x00000002U)
+#define ADC_INJECTED_RANK_3 (0x00000003U)
+#define ADC_INJECTED_RANK_4 (0x00000004U)
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_edge_Injected ADCEx external trigger enable for injected group
+ * @{
+ */
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_NONE (0x00000000U)
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISING ((uint32_t)ADC_CR2_JEXTEN_0)
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING ((uint32_t)ADC_CR2_JEXTEN_1)
+#define ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING ((uint32_t)ADC_CR2_JEXTEN)
+/**
+ * @}
+ */
+
+/** @defgroup ADCEx_External_trigger_source_Injected ADCEx External trigger source Injected
+ * @{
+ */
+/* External triggers for injected groups of ADC1 */
+#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ADC_EXTERNALTRIGINJEC_T2_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ADC_EXTERNALTRIGINJEC_T2_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ADC_EXTERNALTRIGINJEC_T3_CC4
+#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ADC_EXTERNALTRIGINJEC_T4_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC1 ADC_EXTERNALTRIGINJEC_T4_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC2 ADC_EXTERNALTRIGINJEC_T4_CC2
+#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ADC_EXTERNALTRIGINJEC_T4_CC3
+#define ADC_EXTERNALTRIGINJECCONV_T7_TRGO ADC_EXTERNALTRIGINJEC_T7_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T9_CC1 ADC_EXTERNALTRIGINJEC_T9_CC1
+#define ADC_EXTERNALTRIGINJECCONV_T9_TRGO ADC_EXTERNALTRIGINJEC_T9_TRGO
+#define ADC_EXTERNALTRIGINJECCONV_T10_CC1 ADC_EXTERNALTRIGINJEC_T10_CC1
+#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ADC_EXTERNALTRIGINJEC_EXT_IT15
+#define ADC_INJECTED_SOFTWARE_START (0x00000010U)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Private constants ---------------------------------------------------------*/
+
+/** @addtogroup ADCEx_Private_Constants ADCEx Private Constants
+ * @{
+ */
+
+/** @defgroup ADCEx_Internal_HAL_driver_Ext_trig_src_Injected ADCEx Internal HAL driver Ext trig src Injected
+ * @{
+ */
+
+/* List of external triggers of injected group for ADC1: */
+/* (used internally by HAL driver. To not use into HAL structure parameters) */
+#define ADC_EXTERNALTRIGINJEC_T9_CC1 (0x00000000U)
+#define ADC_EXTERNALTRIGINJEC_T9_TRGO ((uint32_t)( ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJEC_T2_TRGO ((uint32_t)( ADC_CR2_JEXTSEL_1 ))
+#define ADC_EXTERNALTRIGINJEC_T2_CC1 ((uint32_t)( ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJEC_T3_CC4 ((uint32_t)( ADC_CR2_JEXTSEL_2 ))
+#define ADC_EXTERNALTRIGINJEC_T4_TRGO ((uint32_t)( ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJEC_T4_CC1 ((uint32_t)( ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 ))
+#define ADC_EXTERNALTRIGINJEC_T4_CC2 ((uint32_t)( ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJEC_T4_CC3 ((uint32_t)(ADC_CR2_JEXTSEL_3 ))
+#define ADC_EXTERNALTRIGINJEC_T10_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0))
+#define ADC_EXTERNALTRIGINJEC_T7_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 ))
+#define ADC_EXTERNALTRIGINJEC_EXT_IT15 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup ADCEx_Exported_Macros ADCEx Exported Macros
+ * @{
+ */
+/* Macro for internal HAL driver usage, and possibly can be used into code of */
+/* final user. */
+
+/**
+ * @brief Selection of channels bank.
+ * Note: Banks availability depends on devices categories.
+ * This macro is intended to change bank selection quickly on the fly,
+ * without going through ADC init structure update and execution of function
+ * 'HAL_ADC_Init()'.
+ * @param __HANDLE__: ADC handle
+ * @param __BANK__: Bank selection. This parameter can be a value of @ref ADC_ChannelsBank.
+ * @retval None
+ */
+#define __HAL_ADC_CHANNELS_BANK(__HANDLE__, __BANK__) \
+ MODIFY_REG((__HANDLE__)->Instance->CR2, ADC_CR2_CFG, (__BANK__))
+
+#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX)
+/**
+ * @brief Configures the ADC channels speed.
+ * Limited to channels 3, 8, 13 and to devices category Cat.3, Cat.4, Cat.5.
+ * - For ADC_CHANNEL_3: Used as ADC direct channel (fast channel) if OPAMP1 is
+ * in power down mode.
+ * - For ADC_CHANNEL_8: Used as ADC direct channel (fast channel) if OPAMP2 is
+ * in power down mode.
+ * - For ADC_CHANNEL_13: Used as ADC re-routed channel if OPAMP3 is in
+ * power down mode. Otherwise, channel 13 is connected to OPAMP3 output and
+ * routed through switches COMP1_SW1 and VCOMP to ADC switch matrix.
+ * (Note: OPAMP3 is available on STM32L1 Cat.4 only).
+ * @param __CHANNEL__: ADC channel
+ * This parameter can be one of the following values:
+ * @arg ADC_CHANNEL_3: Channel 3 is selected.
+ * @arg ADC_CHANNEL_8: Channel 8 is selected.
+ * @arg ADC_CHANNEL_13: Channel 13 is selected.
+ * @retval None
+ */
+#define __HAL_ADC_CHANNEL_SPEED_FAST(__CHANNEL__) \
+ ( ( ((__CHANNEL__) == ADC_CHANNEL_3) \
+ )? \
+ (SET_BIT(COMP->CSR, COMP_CSR_FCH3)) \
+ : \
+ ( ( ((__CHANNEL__) == ADC_CHANNEL_8) \
+ )? \
+ (SET_BIT(COMP->CSR, COMP_CSR_FCH8)) \
+ : \
+ ( ( ((__CHANNEL__) == ADC_CHANNEL_13) \
+ )? \
+ (SET_BIT(COMP->CSR, COMP_CSR_RCH13)) \
+ : \
+ (SET_BIT(COMP->CSR, 0x00000000)) \
+ ) \
+ ) \
+ )
+
+#define __HAL_ADC_CHANNEL_SPEED_SLOW(__CHANNEL__) \
+ ( ( ((__CHANNEL__) == ADC_CHANNEL_3) \
+ )? \
+ (CLEAR_BIT(COMP->CSR, COMP_CSR_FCH3)) \
+ : \
+ ( ( ((__CHANNEL__) == ADC_CHANNEL_8) \
+ )? \
+ (CLEAR_BIT(COMP->CSR, COMP_CSR_FCH8)) \
+ : \
+ ( ( ((__CHANNEL__) == ADC_CHANNEL_13) \
+ )? \
+ (CLEAR_BIT(COMP->CSR, COMP_CSR_RCH13)) \
+ : \
+ (SET_BIT(COMP->CSR, 0x00000000)) \
+ ) \
+ ) \
+ )
+#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */
+
+/**
+ * @}
+ */
+
+/* Private macro ------------------------------------------------------------*/
+
+/** @defgroup ADCEx_Private_Macro ADCEx Private Macro
+ * @{
+ */
+/* Macro reserved for internal HAL driver usage, not intended to be used in */
+/* code of final user. */
+
+/**
+ * @brief Set ADC ranks available in register SQR1.
+ * Register SQR1 bits availability depends on device category.
+ * @param _NbrOfConversion_: Regular channel sequence length
+ * @retval None
+ */
+#if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX)
+#define __ADC_SQR1_SQXX (ADC_SQR1_SQ28 | ADC_SQR1_SQ27 | ADC_SQR1_SQ26 | ADC_SQR1_SQ25)
+#else
+#define __ADC_SQR1_SQXX (ADC_SQR1_SQ27 | ADC_SQR1_SQ26 | ADC_SQR1_SQ25)
+#endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */
+
+/**
+ * @brief Set the ADC's sample time for channel numbers between 30 and 31.
+ * Register SMPR0 availability depends on device category. If register is not
+ * available on the current device, this macro does nothing.
+ * @retval None
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX)
+#define ADC_SMPR0(_SAMPLETIME_, _CHANNELNB_) \
+ ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 30)))
+#else
+#define ADC_SMPR0(_SAMPLETIME_, _CHANNELNB_) \
+ (0x00000000U)
+#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */
+
+#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX)
+/**
+ * @brief Set the ADC's sample time for channel numbers between 20 and 29.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) \
+ ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 20)))
+#else
+/**
+ * @brief Set the ADC's sample time for channel numbers between 20 and 26.
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param _CHANNELNB_: Channel number.
+ * @retval None
+ */
+#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) \
+ ((_SAMPLETIME_) << (3 * ((_CHANNELNB_) - 20)))
+#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */
+
+/**
+ * @brief Defines the highest channel available in register SMPR1. Channels
+ * availability depends on device category:
+ * Highest channel in register SMPR1 is channel 26 for devices Cat.1, Cat.2, Cat.3
+ * Highest channel in register SMPR1 is channel 29 for devices Cat.4, Cat.5
+ * @param None
+ * @retval None
+ */
+#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX)
+#define ADC_SMPR1_CHANNEL_MAX ADC_CHANNEL_29
+#else
+#define ADC_SMPR1_CHANNEL_MAX ADC_CHANNEL_26
+#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */
+
+
+/**
+ * @brief Define mask of configuration bits of ADC and regular group in
+ * register CR2 (bits of ADC enable, conversion start and injected group are
+ * excluded of this mask).
+ * @retval None
+ */
+#if defined (STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined (STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined (STM32L151xE) || defined (STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX)
+#define ADC_CR2_MASK_ADCINIT() \
+ (ADC_CR2_EXTEN | ADC_CR2_EXTSEL | ADC_CR2_ALIGN | ADC_CR2_EOCS | ADC_CR2_DDS | ADC_CR2_DELS | ADC_CR2_CFG | ADC_CR2_CONT)
+#else
+#define ADC_CR2_MASK_ADCINIT() \
+ (ADC_CR2_EXTEN | ADC_CR2_EXTSEL | ADC_CR2_ALIGN | ADC_CR2_EOCS | ADC_CR2_DDS | ADC_CR2_DELS | ADC_CR2_CONT)
+#endif
+
+
+/**
+ * @brief Get the maximum ADC conversion cycles on all channels.
+ * Returns the selected sampling time + conversion time (12.5 ADC clock cycles)
+ * Approximation of sampling time within 2 ranges, returns the highest value:
+ * below 24 cycles {4 cycles; 9 cycles; 16 cycles; 24 cycles}
+ * between 48 cycles and 384 cycles {48 cycles; 96 cycles; 192 cycles; 384 cycles}
+ * Unit: ADC clock cycles
+ * @param __HANDLE__: ADC handle
+ * @retval ADC conversion cycles on all channels
+ */
+#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX)
+#define ADC_CONVCYCLES_MAX_RANGE(__HANDLE__) \
+ (( (((__HANDLE__)->Instance->SMPR3 & ADC_SAMPLETIME_ALLCHANNELS_SMPR3BIT2) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR0 & ADC_SAMPLETIME_ALLCHANNELS_SMPR0BIT2) == RESET) ) ? \
+ \
+ ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_24CYCLES : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_384CYCLES \
+ )
+#else
+#define ADC_CONVCYCLES_MAX_RANGE(__HANDLE__) \
+ (( (((__HANDLE__)->Instance->SMPR3 & ADC_SAMPLETIME_ALLCHANNELS_SMPR3BIT2) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR2 & ADC_SAMPLETIME_ALLCHANNELS_SMPR2BIT2) == RESET) && \
+ (((__HANDLE__)->Instance->SMPR1 & ADC_SAMPLETIME_ALLCHANNELS_SMPR1BIT2) == RESET) ) ? \
+ \
+ ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_24CYCLES : ADC_CONVERSIONCLOCKCYCLES_SAMPLETIME_384CYCLES \
+ )
+#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */
+
+/**
+ * @brief Get the ADC clock prescaler from ADC common control register
+ * and convert it to its decimal number setting (refer to reference manual)
+ * @retval None
+ */
+#define ADC_GET_CLOCK_PRESCALER_DECIMAL(__HANDLE__) \
+ ((0x01) << ((ADC->CCR & ADC_CCR_ADCPRE) >> POSITION_VAL(ADC_CCR_ADCPRE)))
+
+/**
+ * @brief Clear register SMPR0.
+ * Register SMPR0 availability depends on device category. If register is not
+ * available on the current device, this macro performs no action.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX)
+#define ADC_SMPR1_CLEAR(__HANDLE__) \
+ CLEAR_BIT((__HANDLE__)->Instance->SMPR1, (ADC_SMPR1_SMP29 | ADC_SMPR1_SMP28 | ADC_SMPR1_SMP27 | \
+ ADC_SMPR1_SMP26 | ADC_SMPR1_SMP25 | ADC_SMPR1_SMP24 | \
+ ADC_SMPR1_SMP23 | ADC_SMPR1_SMP22 | ADC_SMPR1_SMP21 | \
+ ADC_SMPR1_SMP20 ))
+
+#define ADC_SMPR0_CLEAR(__HANDLE__) \
+ (CLEAR_BIT((__HANDLE__)->Instance->SMPR0, (ADC_SMPR0_SMP31 | ADC_SMPR0_SMP30)))
+#else
+#define ADC_SMPR1_CLEAR(__HANDLE__) \
+ CLEAR_BIT((__HANDLE__)->Instance->SMPR1, (ADC_SMPR1_SMP26 | ADC_SMPR1_SMP25 | ADC_SMPR1_SMP24 | \
+ ADC_SMPR1_SMP23 | ADC_SMPR1_SMP22 | ADC_SMPR1_SMP21 | \
+ ADC_SMPR1_SMP20 ))
+
+#define ADC_SMPR0_CLEAR(__HANDLE__) __NOP()
+#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */
+
+/**
+ * @brief Clear register CR2.
+ * @param __HANDLE__: ADC handle
+ * @retval None
+ */
+#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX)
+#define ADC_CR2_CLEAR(__HANDLE__) \
+ (CLEAR_BIT((__HANDLE__)->Instance->CR2, (ADC_CR2_SWSTART | ADC_CR2_EXTEN | ADC_CR2_EXTSEL | \
+ ADC_CR2_JSWSTART | ADC_CR2_JEXTEN | ADC_CR2_JEXTSEL | \
+ ADC_CR2_ALIGN | ADC_CR2_EOCS | ADC_CR2_DDS | \
+ ADC_CR2_DMA | ADC_CR2_DELS | ADC_CR2_CFG | \
+ ADC_CR2_CONT | ADC_CR2_ADON )) \
+ )
+#else
+#define ADC_CR2_CLEAR(__HANDLE__) \
+ (CLEAR_BIT((__HANDLE__)->Instance->CR2, (ADC_CR2_SWSTART | ADC_CR2_EXTEN | ADC_CR2_EXTSEL | \
+ ADC_CR2_JSWSTART | ADC_CR2_JEXTEN | ADC_CR2_JEXTSEL | \
+ ADC_CR2_ALIGN | ADC_CR2_EOCS | ADC_CR2_DDS | \
+ ADC_CR2_DMA | ADC_CR2_DELS | \
+ ADC_CR2_CONT | ADC_CR2_ADON )) \
+ )
+#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */
+
+/**
+ * @brief Set the sampling time of selected channel on register SMPR0
+ * Register SMPR0 availability depends on device category. If register is not
+ * available on the current device, this macro performs no action.
+ * @param __HANDLE__: ADC handle
+ * @param _SAMPLETIME_: Sample time parameter.
+ * @param __CHANNEL__: Channel number.
+ * @retval None
+ */
+#if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined(STM32L151xDX) || defined (STM32L152xE) || defined (STM32L152xDX) || defined (STM32L162xE) || defined (STM32L162xDX)
+#define ADC_SMPR0_CHANNEL_SET(__HANDLE__, _SAMPLETIME_, __CHANNEL__) \
+ MODIFY_REG((__HANDLE__)->Instance->SMPR0, \
+ ADC_SMPR0(ADC_SMPR0_SMP30, (__CHANNEL__)), \
+ ADC_SMPR0((_SAMPLETIME_), (__CHANNEL__)) )
+#else
+#define ADC_SMPR0_CHANNEL_SET(__HANDLE__, _SAMPLETIME_, __CHANNEL__) __NOP()
+#endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L151xDX || STM32L152xE || STM32L152xDX || STM32L162xE || STM32L162xDX */
+
+
+#define IS_ADC_INJECTED_RANK(CHANNEL) (((CHANNEL) == ADC_INJECTED_RANK_1) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_2) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_3) || \
+ ((CHANNEL) == ADC_INJECTED_RANK_4) )
+
+#define IS_ADC_EXTTRIGINJEC_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_NONE) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISING) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_FALLING) || \
+ ((EDGE) == ADC_EXTERNALTRIGINJECCONV_EDGE_RISINGFALLING) )
+
+#define IS_ADC_EXTTRIGINJEC(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC2) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T7_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T9_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T9_TRGO) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_T10_CC1) || \
+ ((REGTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15) || \
+ ((REGTRIG) == ADC_SOFTWARE_START) )
+
+/** @defgroup ADCEx_injected_nb_conv_verification ADCEx injected nb conv verification
+ * @{
+ */
+#define IS_ADC_INJECTED_NB_CONV(LENGTH) (((LENGTH) >= (1U)) && ((LENGTH) <= (4U)))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup ADCEx_Exported_Functions
+ * @{
+ */
+
+/* IO operation functions *****************************************************/
+/** @addtogroup ADCEx_Exported_Functions_Group1
+ * @{
+ */
+
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout);
+
+/* Non-blocking mode: Interruption */
+HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc);
+HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc);
+
+/* ADC retrieve conversion value intended to be used with polling or interruption */
+uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank);
+
+/* ADC IRQHandler and Callbacks used in non-blocking modes (Interruption) */
+void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc);
+/**
+ * @}
+ */
+
+
+/* Peripheral Control functions ***********************************************/
+/** @addtogroup ADCEx_Exported_Functions_Group2
+ * @{
+ */
+
+HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected);
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L1xx_HAL_ADC_EX_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
