Diff: TARGET_MAX32625NEXPAQ/TOOLCHAIN_GCC_ARM/owm.h

Revision:

171:3a7713b1edbc

Parent:

169:a7c7b631e539

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_MAX32625NEXPAQ/TOOLCHAIN_GCC_ARM/owm.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,320 @@
+/**
+ * @file owm.h
+ * @brief      Registers, Bit Masks and Bit Positions for the 1-Wire Master
+ *             peripheral module.
+ */
+/* ****************************************************************************
+* Copyright (C) 2016 Maxim Integrated Products, Inc., All Rights Reserved.
+*
+* Permission is hereby granted, free of charge, to any person obtaining a
+* copy of this software and associated documentation files (the "Software"),
+* to deal in the Software without restriction, including without limitation
+* the rights to use, copy, modify, merge, publish, distribute, sublicense,
+* and/or sell copies of the Software, and to permit persons to whom the
+* Software is furnished to do so, subject to the following conditions:
+*
+* The above copyright notice and this permission notice shall be included
+* in all copies or substantial portions of the Software.
+*
+* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+* IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+* OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+* OTHER DEALINGS IN THE SOFTWARE.
+*
+* Except as contained in this notice, the name of Maxim Integrated
+* Products, Inc. shall not be used except as stated in the Maxim Integrated
+* Products, Inc. Branding Policy.
+*
+* The mere transfer of this software does not imply any licenses
+* of trade secrets, proprietary technology, copyrights, patents,
+* trademarks, maskwork rights, or any other form of intellectual
+* property whatsoever. Maxim Integrated Products, Inc. retains all
+* ownership rights.
+*
+* $Date: 2016-03-14 10:08:53 -0500 (Mon, 14 Mar 2016) $
+* $Revision: 21855 $
+*
+**************************************************************************** */
+
+/* Define to prevent redundant inclusion */
+#ifndef _OWM_H_
+#define _OWM_H_
+
+/* **** Includes **** */
+#include "mxc_config.h"
+#include "mxc_sys.h"
+#include "owm_regs.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @defgroup owm 1-Wire Master (OWM)
+ * @ingroup periphlibs
+ * @{
+ */
+
+/* **** Definitions **** */
+
+/**
+ * Enumeration type for 1-Wire Overdrive Speed Options.
+ */
+typedef enum {
+    OWM_OVERDRIVE_UNUSED = MXC_V_OWM_CTRL_STAT_OD_SPEC_MODE_12US, /**< 12us Overdrive Speed Select. */
+    OWM_OVERDRIVE_12US = MXC_V_OWM_CTRL_STAT_OD_SPEC_MODE_12US,   /**< 12us Overdrive Speed Select. */
+    OWM_OVERDRIVE_10US = MXC_V_OWM_CTRL_STAT_OD_SPEC_MODE_10US    /**< 10us Overdrive Speed Select. */
+} owm_overdrive_t;
+
+/**
+ * Enumeration type for specifying options for 1-Wire external pullup mode.
+ */
+typedef enum {
+    OWM_EXT_PU_ACT_HIGH = 0,  /**< Pullup pin is active high when enabled.        */
+    OWM_EXT_PU_ACT_LOW = 1,   /**< Pullup pin is active low when enabled.         */
+    OWM_EXT_PU_UNUSED = 2,    /**< Pullup pin is not used for an external pullup. */
+} owm_ext_pu_t;
+
+/**
+ * Structure type for 1-Wire Master configuration.
+ */
+typedef struct {
+    uint8_t int_pu_en;              /**< 1 = internal pullup on.   */
+    owm_ext_pu_t ext_pu_mode;       /**< See #owm_ext_pu_t.   */
+    uint8_t long_line_mode;         /**< 1 = long line mode enable.    */
+    owm_overdrive_t overdrive_spec; /**< 0 = timeslot is 12us, 1 = timeslot is 10us.   */
+} owm_cfg_t;
+
+
+#define READ_ROM_COMMAND        0x33      /**< Read ROM Command */
+#define MATCH_ROM_COMMAND       0x55      /**< Match ROM Command */
+#define SEARCH_ROM_COMMAND      0xF0      /**< Search ROM Command */
+#define SKIP_ROM_COMMAND        0xCC      /**< Skip ROM Command */
+#define OD_SKIP_ROM_COMMAND     0x3C      /**< Overdrive Skip ROM Command */
+#define OD_MATCH_ROM_COMMAND    0x69      /**< Overdrive Match ROM Command */
+#define RESUME_COMMAND          0xA5      /**< Resume Command */
+
+/* **** Globals **** */
+
+/* **** Function Prototypes **** */
+
+/**
+ * @brief   Initialize and enable OWM module.
+ * @param   owm         Pointer to OWM regs.
+ * @param   cfg         Pointer to OWM configuration.
+ * @param   sys_cfg     Pointer to system configuration object
+ *
+ * @retval  #E_NO_ERROR if everything is successful
+ * @retval  #E_NULL_PTR if parameter is a null pointer
+ * @retval  #E_BUSY if IOMAN was not configured correctly
+ * @retval  #E_UNINITIALIZED if OWM CLK disabled
+ * @retval  #E_NOT_SUPPORTED if 1MHz CLK cannot be created with given system and owm CLK
+ * @retval  #E_BAD_PARAM if bad cfg parameter passed in
+ */
+int OWM_Init(mxc_owm_regs_t *owm, const owm_cfg_t *cfg, const sys_cfg_owm_t *sys_cfg);
+
+/**
+ * @brief   Shutdown OWM module.
+ * @param   owm         Pointer to OWM regs.
+ * @retval  #E_NO_ERROR if everything is successful
+ * @retval  #E_BUSY if IOMAN was not released
+ */
+int OWM_Shutdown(mxc_owm_regs_t *owm);
+
+/**
+ * @brief   Send 1-Wire reset pulse. Will block until transaction is complete.
+ * @param   owm         Pointer to OWM regs.
+ * @retval  (0) = no presence pulse detected, (1) = presence pulse detected
+ */
+int OWM_Reset(mxc_owm_regs_t *owm);
+
+/**
+ * @brief   Send and receive one byte of data. Will block until transaction is complete.
+ * @param   owm         Pointer to OWM regs.
+ * @param   data        data to send
+ * @retval  data read (1 byte)
+ */
+int OWM_TouchByte(mxc_owm_regs_t *owm, uint8_t data);
+
+/**
+ * @brief   Write one byte of data. Will block until transaction is complete.
+ * @param   owm         Pointer to OWM regs.
+ * @param   data        data to send
+ * @retval  #E_NO_ERROR if everything is successful
+ * @retval  #E_COMM_ERR if data written != data parameter
+ */
+int OWM_WriteByte(mxc_owm_regs_t *owm, uint8_t data);
+
+/**
+ * @brief   Read one byte of data. Will block until transaction is complete.
+ * @param   owm         Pointer to OWM regs.
+ * @retval  data read (1 byte)
+ */
+int OWM_ReadByte(mxc_owm_regs_t *owm);
+
+/**
+ * @brief   Send and receive one bit of data. Will block until transaction is complete.
+ * @param   owm         Pointer to OWM regs.
+ * @param   bit         bit to send
+ * @retval  bit read
+ */
+int OWM_TouchBit(mxc_owm_regs_t *owm, uint8_t bit);
+
+/**
+ * @brief   Write one bit of data. Will block until transaction is complete.
+ * @param   owm         Pointer to OWM regs.
+ * @param   bit         bit to send
+ * @retval  #E_NO_ERROR if everything is successful
+ * @retval  #E_COMM_ERR if bit written != bit parameter
+ */
+int OWM_WriteBit(mxc_owm_regs_t *owm, uint8_t bit);
+
+/**
+ * @brief   Read one bit of data. Will block until transaction is complete.
+ * @param   owm         Pointer to OWM regs.
+ * @retval  bit read
+ */
+int OWM_ReadBit(mxc_owm_regs_t *owm);
+
+/**
+ * @brief   Write multiple bytes of data. Will block until transaction is complete.
+ * @param   owm     Pointer to OWM regs.
+ * @param   data    Pointer to buffer for write data.
+ * @param   len     Number of bytes to write.
+ *
+ * @retval  Number of bytes written if successful
+ * @retval  #E_COMM_ERR if line short detected before transaction
+ */
+int OWM_Write(mxc_owm_regs_t *owm, uint8_t* data, int len);
+
+/**
+ * @brief   Read multiple bytes of data. Will block until transaction is complete.
+ * @param   owm     Pointer to OWM regs.
+ * @param   data    Pointer to buffer for read data.
+ * @param   len     Number of bytes to read.
+ *
+ * @retval Number of bytes read if successful
+ * @retval #E_COMM_ERR if line short detected before transaction
+ */
+int OWM_Read(mxc_owm_regs_t *owm, uint8_t* data, int len);
+
+/**
+ * @brief   Starts 1-Wire communication with Read ROM command
+ * @note    Only use the Read ROM command with one slave on the bus
+ * @param   owm         Pointer to OWM regs.
+ * @param   ROMCode     Pointer to buffer for ROM code read
+ * @retval  #E_NO_ERROR if everything is successful
+ * @retval  #E_COMM_ERR if reset, read or write fails
+ */
+int OWM_ReadROM(mxc_owm_regs_t *owm, uint8_t* ROMCode);
+
+/**
+ * @brief   Starts 1-Wire communication with Match ROM command
+ * @param   owm         Pointer to OWM regs.
+ * @param   ROMCode     Pointer to buffer with ROM code to match
+ * @retval  #E_NO_ERROR if everything is successful
+ * @retval  #E_COMM_ERR if reset or write fails
+ */
+int OWM_MatchROM(mxc_owm_regs_t *owm, uint8_t* ROMCode);
+
+/**
+ * @brief   Starts 1-Wire communication with Overdrive Match ROM command
+ * @note    After Overdrive Match ROM command is sent, the OWM is set to
+ *          overdrive speed. To set back to standard speed use OWM_SetOverdrive.
+ * @param   owm         Pointer to OWM regs.
+ * @param   ROMCode     Pointer to buffer with ROM code to match
+ * @retval  #E_NO_ERROR if everything is successful
+ * @retval  #E_COMM_ERR if reset or write fails
+ */
+int OWM_ODMatchROM(mxc_owm_regs_t *owm, uint8_t* ROMCode);
+
+/**
+ * @brief   Starts 1-Wire communication with Skip ROM command
+ * @param   owm         Pointer to OWM regs.
+ * @retval  #E_NO_ERROR if everything is successful
+ * @retval  #E_COMM_ERR if reset or write fails
+ */
+int OWM_SkipROM(mxc_owm_regs_t *owm);
+
+/**
+ * @brief   Starts 1-Wire communication with Overdrive Skip ROM command
+ * @note    After Overdrive Skip ROM command is sent, the OWM is set to
+ *          overdrive speed. To set back to standard speed use OWM_SetOverdrive
+ * @param   owm         Pointer to OWM regs.
+ * @retval  #E_NO_ERROR if everything is successful
+ * @retval  #E_COMM_ERR if reset or write fails
+ */
+int OWM_ODSkipROM(mxc_owm_regs_t *owm);
+
+/**
+ * @brief   Starts 1-Wire communication with Resume command
+ * @param   owm         Pointer to OWM regs.
+ * @retval  #E_NO_ERROR if everything is successful
+ * @retval  #E_COMM_ERR if reset or write fails
+ */
+int OWM_Resume(mxc_owm_regs_t *owm);
+
+/**
+ * @brief   Starts 1-Wire communication with Search ROM command
+ * @param   owm         Pointer to OWM regs.
+ * @param   newSearch   (1) = start new search, (0) = continue search for next ROM
+ * @param   ROMCode     Pointer to buffer with ROM code found
+ * @retval  (1) = ROM found, (0) = no new ROM found, end of search
+ */
+int OWM_SearchROM(mxc_owm_regs_t *owm, int newSearch, uint8_t* ROMCode);
+
+/**
+ * @brief   Clear interrupt flags.
+ * @param   owm         Pointer to OWM regs.
+ * @param   mask        Mask of interrupts to clear.
+ */
+__STATIC_INLINE void OWM_ClearFlags(mxc_owm_regs_t *owm, uint32_t mask)
+{
+    owm->intfl = mask;
+}
+
+/**
+ * @brief   Get interrupt flags.
+ * @param   owm         Pointer to OWM regs.
+ * @retval  Mask of active flags.
+ */
+__STATIC_INLINE unsigned OWM_GetFlags(mxc_owm_regs_t *owm)
+{
+    return (owm->intfl);
+}
+
+/**
+ * @brief   Enables/Disables the External pullup
+ * @param   owm         Pointer to OWM regs.
+ * @param   enable      (1) = enable, (0) = disable
+ */
+__STATIC_INLINE void OWM_SetExtPullup(mxc_owm_regs_t *owm, int enable)
+{
+    if(enable)
+        owm->cfg |= MXC_F_OWM_CFG_EXT_PULLUP_ENABLE;
+    else
+        owm->cfg &= ~(MXC_F_OWM_CFG_EXT_PULLUP_ENABLE);
+}
+
+/**
+ * @brief   Enables/Disables Overdrive speed
+ * @param   owm         Pointer to OWM regs.
+ * @param   enable      (1) = overdrive, (0) = standard
+ */
+__STATIC_INLINE void OWM_SetOverdrive(mxc_owm_regs_t *owm, int enable)
+{
+    if(enable)
+        owm->cfg |= MXC_F_OWM_CFG_OVERDRIVE;
+    else
+        owm->cfg &= ~(MXC_F_OWM_CFG_OVERDRIVE);
+}
+
+/**@} end of group owm */
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _OWM_H_ */