Diff: TARGET_LPC54114/TOOLCHAIN_IAR/fsl_gpio.h

Revision:

171:3a7713b1edbc

Parent:

148:fd96258d940d

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_LPC54114/TOOLCHAIN_IAR/fsl_gpio.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,250 @@
+/*
+ * Copyright (c) 2016, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SDRVL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _LPC_GPIO_H_
+#define _LPC_GPIO_H_
+
+#include "fsl_common.h"
+
+/*!
+ * @addtogroup lpc_gpio
+ * @{
+ */
+
+/*! @file */
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief LPC GPIO driver version 1.0.0. */
+#define FSL_GPIO_DRIVER_VERSION (MAKE_VERSION(1, 0, 0))
+/*@}*/
+
+/*! @brief LPC GPIO direction definition */
+typedef enum _gpio_pin_direction
+{
+    kGPIO_DigitalInput = 0U,  /*!< Set current pin as digital input*/
+    kGPIO_DigitalOutput = 1U, /*!< Set current pin as digital output*/
+} gpio_pin_direction_t;
+
+/*!
+ * @brief The GPIO pin configuration structure.
+ *
+ * Every pin can only be configured as either output pin or input pin at a time.
+ * If configured as a input pin, then leave the outputConfig unused.
+ */
+typedef struct _gpio_pin_config
+{
+    gpio_pin_direction_t pinDirection; /*!< GPIO direction, input or output */
+    /* Output configurations, please ignore if configured as a input one */
+    uint8_t outputLogic; /*!< Set default output logic, no use in input */
+} gpio_pin_config_t;
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*! @name GPIO Configuration */
+/*@{*/
+
+/*!
+ * @brief Initializes a GPIO pin used by the board.
+ *
+ * To initialize the GPIO, define a pin configuration, either input or output, in the user file.
+ * Then, call the GPIO_PinInit() function.
+ *
+ * This is an example to define an input pin or output pin configuration:
+ * @code
+ * // Define a digital input pin configuration,
+ * gpio_pin_config_t config =
+ * {
+ *   kGPIO_DigitalInput,
+ *   0,
+ * }
+ * //Define a digital output pin configuration,
+ * gpio_pin_config_t config =
+ * {
+ *   kGPIO_DigitalOutput,
+ *   0,
+ * }
+ * @endcode
+ *
+ * @param base   GPIO peripheral base pointer(Typically GPIO)
+ * @param port   GPIO port number
+ * @param pin    GPIO pin number
+ * @param config GPIO pin configuration pointer
+ */
+void GPIO_PinInit(GPIO_Type *base, uint32_t port, uint32_t pin, const gpio_pin_config_t *config);
+
+/*@}*/
+
+/*! @name GPIO Output Operations */
+/*@{*/
+
+/*!
+ * @brief Sets the output level of the one GPIO pin to the logic 1 or 0.
+ *
+ * @param base    GPIO peripheral base pointer(Typically GPIO)
+ * @param port   GPIO port number
+ * @param pin    GPIO pin number
+ * @param output  GPIO pin output logic level.
+ *        - 0: corresponding pin output low-logic level.
+ *        - 1: corresponding pin output high-logic level.
+ */
+static inline void GPIO_WritePinOutput(GPIO_Type *base, uint32_t port, uint32_t pin, uint8_t output)
+{
+    base->B[port][pin] = output;
+}
+/*@}*/
+/*! @name GPIO Input Operations */
+/*@{*/
+
+/*!
+ * @brief Reads the current input value of the GPIO PIN.
+ *
+ * @param base GPIO peripheral base pointer(Typically GPIO)
+ * @param port   GPIO port number
+ * @param pin    GPIO pin number
+ * @retval GPIO port input value
+ *        - 0: corresponding pin input low-logic level.
+ *        - 1: corresponding pin input high-logic level.
+ */
+static inline uint32_t GPIO_ReadPinInput(GPIO_Type *base, uint32_t port, uint32_t pin)
+{
+    return (uint32_t)base->B[port][pin];
+}
+/*@}*/
+
+/*!
+ * @brief Sets the output level of the multiple GPIO pins to the logic 1.
+ *
+ * @param base GPIO peripheral base pointer(Typically GPIO)
+ * @param port GPIO port number
+ * @param mask GPIO pin number macro
+ */
+static inline void GPIO_SetPinsOutput(GPIO_Type *base, uint32_t port, uint32_t mask)
+{
+    base->SET[port] = mask;
+}
+
+/*!
+ * @brief Sets the output level of the multiple GPIO pins to the logic 0.
+ *
+ * @param base GPIO peripheral base pointer(Typically GPIO)
+ * @param port GPIO port number
+ * @param mask GPIO pin number macro
+ */
+static inline void GPIO_ClearPinsOutput(GPIO_Type *base, uint32_t port, uint32_t mask)
+{
+    base->CLR[port] = mask;
+}
+
+/*!
+ * @brief Reverses current output logic of the multiple GPIO pins.
+ *
+ * @param base GPIO peripheral base pointer(Typically GPIO)
+ * @param port GPIO port number
+ * @param mask GPIO pin number macro
+ */
+static inline void GPIO_TogglePinsOutput(GPIO_Type *base, uint32_t port, uint32_t mask)
+{
+    base->NOT[port] = mask;
+}
+/*@}*/
+
+/*!
+ * @brief Reads the current input value of the whole GPIO port.
+ *
+ * @param base GPIO peripheral base pointer(Typically GPIO)
+ * @param port GPIO port number
+ */
+static inline uint32_t GPIO_ReadPinsInput(GPIO_Type *base, uint32_t port)
+{
+    return (uint32_t)base->PIN[port];
+}
+
+/*@}*/
+/*! @name GPIO Mask Operations */
+/*@{*/
+
+/*!
+ * @brief Sets port mask, 0 - enable pin, 1 - disable pin.
+ *
+ * @param base GPIO peripheral base pointer(Typically GPIO)
+ * @param port GPIO port number
+ * @param mask GPIO pin number macro
+ */
+static inline void GPIO_SetPortMask(GPIO_Type *base, uint32_t port, uint32_t mask)
+{
+    base->MASK[port] = mask;
+}
+
+/*!
+ * @brief Sets the output level of the masked GPIO port. Only pins enabled by GPIO_SetPortMask() will be affected.
+ *
+ * @param base    GPIO peripheral base pointer(Typically GPIO)
+ * @param port   GPIO port number
+ * @param output  GPIO port output value.
+ */
+static inline void GPIO_WriteMPort(GPIO_Type *base, uint32_t port, uint32_t output)
+{
+    base->MPIN[port] = output;
+}
+
+/*!
+ * @brief Reads the current input value of the masked GPIO port. Only pins enabled by GPIO_SetPortMask() will be
+ * affected.
+ *
+ * @param base   GPIO peripheral base pointer(Typically GPIO)
+ * @param port   GPIO port number
+ * @retval       masked GPIO port value
+ */
+static inline uint32_t GPIO_ReadMPort(GPIO_Type *base, uint32_t port)
+{
+    return (uint32_t)base->MPIN[port];
+}
+
+/*@}*/
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*!
+ * @}
+ */
+
+#endif /* _LPC_GPIO_H_*/