Diff: TARGET_K64F/TOOLCHAIN_IAR/fsl_uart_edma.h

Revision:

171:3a7713b1edbc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_K64F/TOOLCHAIN_IAR/fsl_uart_edma.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,190 @@
+/*
+ * Copyright (c) 2015, Freescale Semiconductor, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of Freescale Semiconductor, Inc. nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _FSL_UART_EDMA_H_
+#define _FSL_UART_EDMA_H_
+
+#include "fsl_uart.h"
+#include "fsl_dmamux.h"
+#include "fsl_edma.h"
+
+/*!
+ * @addtogroup uart_edma_driver
+ * @{
+ */
+
+/*******************************************************************************
+ * Definitions
+ ******************************************************************************/
+
+/* Forward declaration of the handle typedef. */
+typedef struct _uart_edma_handle uart_edma_handle_t;
+
+/*! @brief UART transfer callback function. */
+typedef void (*uart_edma_transfer_callback_t)(UART_Type *base,
+                                              uart_edma_handle_t *handle,
+                                              status_t status,
+                                              void *userData);
+
+/*!
+* @brief UART eDMA handle
+*/
+struct _uart_edma_handle
+{
+    uart_edma_transfer_callback_t callback; /*!< Callback function. */
+    void *userData;                         /*!< UART callback function parameter.*/
+    size_t rxDataSizeAll;                   /*!< Size of the data to receive. */
+    size_t txDataSizeAll;                   /*!< Size of the data to send out. */
+
+    edma_handle_t *txEdmaHandle; /*!< The eDMA TX channel used. */
+    edma_handle_t *rxEdmaHandle; /*!< The eDMA RX channel used. */
+
+    uint8_t nbytes; /*!< eDMA minor byte transfer count initially configured. */
+
+    volatile uint8_t txState; /*!< TX transfer state. */
+    volatile uint8_t rxState; /*!< RX transfer state */
+};
+
+/*******************************************************************************
+ * API
+ ******************************************************************************/
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+/*!
+ * @name eDMA transactional
+ * @{
+ */
+
+/*!
+ * @brief Initializes the UART handle which is used in transactional functions.
+ * @param base UART peripheral base address.
+ * @param handle Pointer to the uart_edma_handle_t structure.
+ * @param callback UART callback, NULL means no callback.
+ * @param userData User callback function data.
+ * @param rxEdmaHandle User-requested DMA handle for RX DMA transfer.
+ * @param txEdmaHandle User-requested DMA handle for TX DMA transfer.
+ */
+void UART_TransferCreateHandleEDMA(UART_Type *base,
+                                   uart_edma_handle_t *handle,
+                                   uart_edma_transfer_callback_t callback,
+                                   void *userData,
+                                   edma_handle_t *txEdmaHandle,
+                                   edma_handle_t *rxEdmaHandle);
+
+/*!
+ * @brief Sends data using eDMA.
+ *
+ * This function sends data using eDMA. This is a non-blocking function, which returns
+ * right away. When all data is sent, the send callback function is called.
+ *
+ * @param base UART peripheral base address.
+ * @param handle UART handle pointer.
+ * @param xfer UART eDMA transfer structure. See #uart_transfer_t.
+ * @retval kStatus_Success if succeeded; otherwise failed.
+ * @retval kStatus_UART_TxBusy Previous transfer ongoing.
+ * @retval kStatus_InvalidArgument Invalid argument.
+ */
+status_t UART_SendEDMA(UART_Type *base, uart_edma_handle_t *handle, uart_transfer_t *xfer);
+
+/*!
+ * @brief Receives data using eDMA.
+ *
+ * This function receives data using eDMA. This is a non-blocking function, which returns
+ * right away. When all data is received, the receive callback function is called.
+ *
+ * @param base UART peripheral base address.
+ * @param handle Pointer to the uart_edma_handle_t structure.
+ * @param xfer UART eDMA transfer structure. See #uart_transfer_t.
+ * @retval kStatus_Success if succeeded; otherwise failed.
+ * @retval kStatus_UART_RxBusy Previous transfer ongoing.
+ * @retval kStatus_InvalidArgument Invalid argument.
+ */
+status_t UART_ReceiveEDMA(UART_Type *base, uart_edma_handle_t *handle, uart_transfer_t *xfer);
+
+/*!
+ * @brief Aborts the sent data using eDMA.
+ *
+ * This function aborts sent data using eDMA.
+ *
+ * @param base UART peripheral base address.
+ * @param handle Pointer to the uart_edma_handle_t structure.
+ */
+void UART_TransferAbortSendEDMA(UART_Type *base, uart_edma_handle_t *handle);
+
+/*!
+ * @brief Aborts the receive data using eDMA.
+ *
+ * This function aborts receive data using eDMA.
+ *
+ * @param base UART peripheral base address.
+ * @param handle Pointer to the uart_edma_handle_t structure.
+ */
+void UART_TransferAbortReceiveEDMA(UART_Type *base, uart_edma_handle_t *handle);
+
+/*!
+ * @brief Gets the number of bytes that have been written to UART TX register.
+ *
+ * This function gets the number of bytes that have been written to UART TX
+ * register by DMA.
+ *
+ * @param base UART peripheral base address.
+ * @param handle UART handle pointer.
+ * @param count Send bytes count.
+ * @retval kStatus_NoTransferInProgress No send in progress.
+ * @retval kStatus_InvalidArgument Parameter is invalid.
+ * @retval kStatus_Success Get successfully through the parameter \p count;
+ */
+status_t UART_TransferGetSendCountEDMA(UART_Type *base, uart_edma_handle_t *handle, uint32_t *count);
+
+/*!
+ * @brief Gets the number of received bytes.
+ *
+ * This function gets the number of received bytes.
+ *
+ * @param base UART peripheral base address.
+ * @param handle UART handle pointer.
+ * @param count Receive bytes count.
+ * @retval kStatus_NoTransferInProgress No receive in progress.
+ * @retval kStatus_InvalidArgument Parameter is invalid.
+ * @retval kStatus_Success Get successfully through the parameter \p count;
+ */
+status_t UART_TransferGetReceiveCountEDMA(UART_Type *base, uart_edma_handle_t *handle, uint32_t *count);
+
+/*@}*/
+
+#if defined(__cplusplus)
+}
+#endif
+
+/*! @}*/
+
+#endif /* _FSL_UART_EDMA_H_ */