Diff: TARGET_FF_LPC546XX/TOOLCHAIN_ARM_STD/fsl_flexcomm.h

Revision:

171:3a7713b1edbc

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_FF_LPC546XX/TOOLCHAIN_ARM_STD/fsl_flexcomm.h	Thu Nov 08 11:45:42 2018 +0000
@@ -0,0 +1,79 @@
+/*
+ * The Clear BSD License
+ * Copyright (c) 2016, Freescale Semiconductor, Inc.
+ * Copyright 2016-2017 NXP
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted (subject to the limitations in the disclaimer below) provided
+ * that the following conditions are met:
+ *
+ * o Redistributions of source code must retain the above copyright notice, this list
+ *   of conditions and the following disclaimer.
+ *
+ * o Redistributions in binary form must reproduce the above copyright notice, this
+ *   list of conditions and the following disclaimer in the documentation and/or
+ *   other materials provided with the distribution.
+ *
+ * o Neither the name of the copyright holder nor the names of its
+ *   contributors may be used to endorse or promote products derived from this
+ *   software without specific prior written permission.
+ *
+ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#ifndef _FSL_FLEXCOMM_H_
+#define _FSL_FLEXCOMM_H_
+
+#include "fsl_common.h"
+
+/*!
+ * @addtogroup flexcomm_driver
+ * @{
+ */
+
+/*! @name Driver version */
+/*@{*/
+/*! @brief FlexCOMM driver version 2.0.0. */
+#define FSL_FLEXCOMM_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
+/*@}*/
+
+/*! @brief FLEXCOMM peripheral modes. */
+typedef enum
+{
+    FLEXCOMM_PERIPH_NONE,   /*!< No peripheral */
+    FLEXCOMM_PERIPH_USART,  /*!< USART peripheral */
+    FLEXCOMM_PERIPH_SPI,    /*!< SPI Peripheral */
+    FLEXCOMM_PERIPH_I2C,    /*!< I2C Peripheral */
+    FLEXCOMM_PERIPH_I2S_TX, /*!< I2S TX Peripheral */
+    FLEXCOMM_PERIPH_I2S_RX, /*!< I2S RX Peripheral */
+} FLEXCOMM_PERIPH_T;
+
+/*! @brief Typedef for interrupt handler. */
+typedef void (*flexcomm_irq_handler_t)(void *base, void *handle);
+
+/*! @brief Array with IRQ number for each FLEXCOMM module. */
+extern IRQn_Type const kFlexcommIrqs[];
+
+/*! @brief Returns instance number for FLEXCOMM module with given base address. */
+uint32_t FLEXCOMM_GetInstance(void *base);
+
+/*! @brief Initializes FLEXCOMM and selects peripheral mode according to the second parameter. */
+status_t FLEXCOMM_Init(void *base, FLEXCOMM_PERIPH_T periph);
+
+/*! @brief Sets IRQ handler for given FLEXCOMM module. It is used by drivers register IRQ handler according to FLEXCOMM
+ * mode */
+void FLEXCOMM_SetIRQHandler(void *base, flexcomm_irq_handler_t handler, void *handle);
+
+/*@}*/
+
+#endif /* _FSL_FLEXCOMM_H_*/