mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart_ex.h
- Revision:
- 108:34e6b704fe68
- Parent:
- 93:e188a91d3eaa
- Child:
- 122:f9eeca106725
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart_ex.h Wed Sep 16 15:32:31 2015 +0100
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart_ex.h Fri Oct 02 07:35:07 2015 +0200
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f0xx_hal_uart_ex.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 11-December-2014
+ * @version V1.3.0
+ * @date 26-June-2015
* @brief Header file of UART HAL Extension module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -32,7 +32,7 @@
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
- ******************************************************************************
+ ******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
@@ -52,29 +52,30 @@
/** @addtogroup UARTEx
* @{
- */
+ */
/* Exported types ------------------------------------------------------------*/
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UARTEx_Exported_Types UARTEx Exported Types
* @{
- */
-
-/**
- * @brief UART wake up from stop mode parameters
*/
-typedef struct
+
+/**
+ * @brief UART wake up from stop mode parameters
+ */
+typedef struct
{
uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
be filled up. */
-
+
uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
This parameter can be a value of @ref UART_WakeUp_Address_Length */
-
+
uint8_t Address; /*!< UART/USART node address (7-bit long max) */
} UART_WakeUpTypeDef;
+
/**
* @}
*/
@@ -84,7 +85,7 @@
/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
* @{
*/
-
+
/** @defgroup UARTEx_Word_Length UARTEx Word Length
* @{
*/
@@ -94,14 +95,9 @@
#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
-#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_7B) || \
- ((LENGTH) == UART_WORDLENGTH_8B) || \
- ((LENGTH) == UART_WORDLENGTH_9B))
#else
#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
-#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
- ((LENGTH) == UART_WORDLENGTH_9B))
#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
@@ -115,35 +111,26 @@
#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
-#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
-#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
-#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
-#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE)
-#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
- ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \
- ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \
- ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x00000000) /*!< Auto Baud rate detection on start bit */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) /*!< Auto Baud rate detection on falling edge */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1) /*!< Auto Baud rate detection on 0x7F frame detection */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE) /*!< Auto Baud rate detection on 0x55 frame detection */
#else
-#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
-#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
-#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
- ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE))
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x00000000) /*!< Auto Baud rate detection on start bit */
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) /*!< Auto Baud rate detection on falling edge */
#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
/**
* @}
*/
-
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UARTEx_LIN UARTEx Local Interconnection Network mode
* @{
*/
-#define UART_LIN_DISABLE ((uint32_t)0x00000000)
-#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN)
-#define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) || \
- ((LIN) == UART_LIN_ENABLE))
+#define UART_LIN_DISABLE ((uint32_t)0x00000000) /*!< Local Interconnect Network disable */
+#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN) /*!< Local Interconnect Network enable */
/**
* @}
*/
@@ -151,10 +138,8 @@
/** @defgroup UARTEx_LIN_Break_Detection UARTEx LIN Break Detection
* @{
*/
-#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
-#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
-#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
- ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) /*!< LIN 10-bit break detection length */
+#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL) /*!< LIN 11-bit break detection length */
/**
* @}
*/
@@ -165,7 +150,9 @@
* - 0xXXXX : Flag mask in the ISR register
* @{
*/
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_FLAG_REACK ((uint32_t)0x00400000)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_FLAG_TEACK ((uint32_t)0x00200000)
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_FLAG_WUF ((uint32_t)0x00100000)
@@ -176,9 +163,9 @@
#define UART_FLAG_BUSY ((uint32_t)0x00010000)
#define UART_FLAG_ABRF ((uint32_t)0x00008000)
#define UART_FLAG_ABRE ((uint32_t)0x00004000)
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_FLAG_EOBF ((uint32_t)0x00001000)
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_FLAG_RTOF ((uint32_t)0x00000800)
#define UART_FLAG_CTS ((uint32_t)0x00000400)
#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
@@ -239,7 +226,9 @@
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
@@ -255,68 +244,79 @@
#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */
#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */
#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
-#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
-#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
- ((PARAM) == UART_SENDBREAK_REQUEST) || \
- ((PARAM) == UART_MUTE_MODE_REQUEST) || \
- ((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \
- ((PARAM) == UART_TXDATA_FLUSH_REQUEST))
#else
-#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
- ((PARAM) == UART_SENDBREAK_REQUEST) || \
- ((PARAM) == UART_MUTE_MODE_REQUEST) || \
- ((PARAM) == UART_RXDATA_FLUSH_REQUEST))
-#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
/**
* @}
*/
-
+
#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
/** @defgroup UART_Stop_Mode_Enable UARTEx Advanced Feature Stop Mode Enable
* @{
*/
-#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000)
-#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM)
-#define IS_UART_ADVFEATURE_STOPMODE(STOPMODE) (((STOPMODE) == UART_ADVFEATURE_STOPMODE_DISABLE) || \
- ((STOPMODE) == UART_ADVFEATURE_STOPMODE_ENABLE))
+#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000) /*!< UART stop mode disable */
+#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM) /*!< UART stop mode enable */
/**
* @}
*/
-
+
/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
* @{
*/
-#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x0000)
-#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1)
-#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS)
-#define IS_UART_WAKEUP_SELECTION(WAKE) (((WAKE) == UART_WAKEUP_ON_ADDRESS) || \
- ((WAKE) == UART_WAKEUP_ON_STARTBIT) || \
- ((WAKE) == UART_WAKEUP_ON_READDATA_NONEMPTY))
+#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x00000000) /*!< UART wake-up on address */
+#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1) /*!< UART wake-up on start bit */
+#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS) /*!< UART wake-up on receive data register not empty */
/**
* @}
- */
+ */
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
-
+
/**
* @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
+ */
+/* Exported macros ------------------------------------------------------------*/
/** @defgroup UARTEx_Exported_Macros UARTEx Exported Macros
* @{
*/
-/** @brief Reports the UART clock source.
- * @param __HANDLE__: specifies the UART Handle
- * @param __CLOCKSOURCE__ : output variable
+/** @brief Flush the UART Data registers.
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None
+ */
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \
+ SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \
+ } while(0)
+#else
+#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \
+ do{ \
+ SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \
+ } while(0)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+
+/**
+ * @}
+ */
+
+/* Private macros ------------------------------------------------------------*/
+/** @defgroup UARTEx_Private_Macros UARTEx Private Macros
+ * @{
+ */
+
+/** @brief Report the UART clock source.
+ * @param __HANDLE__: specifies the UART Handle.
+ * @param __CLOCKSOURCE__: output variable.
* @retval UART clocking source, written in __CLOCKSOURCE__.
*/
#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
-#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
switch(__HAL_RCC_GET_USART1_SOURCE()) \
{ \
@@ -340,7 +340,7 @@
#elif defined (STM32F030x8) || defined (STM32F070x6) || \
defined (STM32F042x6) || defined (STM32F048xx) || \
defined (STM32F051x8) || defined (STM32F058xx)
-#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
@@ -373,7 +373,7 @@
} \
} while(0)
#elif defined(STM32F070xB)
-#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
@@ -414,7 +414,7 @@
} \
} while(0)
#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
-#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
@@ -472,7 +472,7 @@
} \
} while(0)
#elif defined(STM32F091xC) || defined (STM32F098xx)
-#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
@@ -563,7 +563,7 @@
} \
} while(0)
#elif defined(STM32F030xC)
-#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
do { \
if((__HANDLE__)->Instance == USART1) \
{ \
@@ -615,19 +615,19 @@
#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
-/** @brief Computes the UART mask to apply to retrieve the received data
+/** @brief Compute the UART mask to apply to retrieve the received data
* according to the word length and to the parity bits activation.
- * If PCE = 1, the parity bit is not included in the data extracted
+ * @note If PCE = 1, the parity bit is not included in the data extracted
* by the reception API().
* This masking operation is not carried out in the case of
- * DMA transfers.
- * @param __HANDLE__: specifies the UART Handle
- * @retval none
- */
+ * DMA transfers.
+ * @param __HANDLE__: specifies the UART Handle.
+ * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field.
+ */
#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
-#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
+#define UART_MASK_COMPUTATION(__HANDLE__) \
do { \
if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
{ \
@@ -662,9 +662,9 @@
(__HANDLE__)->Mask = 0x003F ; \
} \
} \
-} while(0)
+} while(0)
#else
-#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
+#define UART_MASK_COMPUTATION(__HANDLE__) \
do { \
if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
{ \
@@ -692,6 +692,100 @@
#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+
+/**
+ * @brief Ensure that UART frame length is valid.
+ * @param __LENGTH__: UART frame length.
+ * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
+#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \
+ ((__LENGTH__) == UART_WORDLENGTH_8B) || \
+ ((__LENGTH__) == UART_WORDLENGTH_9B))
+#else
+#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_8B) || \
+ ((__LENGTH__) == UART_WORDLENGTH_9B))
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+
+/**
+ * @brief Ensure that UART auto Baud rate detection mode is valid.
+ * @param __MODE__: UART auto Baud rate detection mode.
+ * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid)
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC)
+#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
+ ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \
+ ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \
+ ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
+#else
+#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
+ ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE))
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \
+ defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */
+
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/**
+ * @brief Ensure that UART LIN state is valid.
+ * @param __LIN__: UART LIN state.
+ * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid)
+ */
+#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \
+ ((__LIN__) == UART_LIN_ENABLE))
+
+/**
+ * @brief Ensure that UART LIN break detection length is valid.
+ * @param __LENGTH__: UART LIN break detection length.
+ * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid)
+ */
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \
+ ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B))
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+/**
+ * @brief Ensure that UART request parameter is valid.
+ * @param __PARAM__: UART request parameter.
+ * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid)
+ */
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \
+ ((__PARAM__) == UART_SENDBREAK_REQUEST) || \
+ ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \
+ ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \
+ ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST))
+#else
+#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \
+ ((__PARAM__) == UART_SENDBREAK_REQUEST) || \
+ ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \
+ ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST))
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC)
+/**
+ * @brief Ensure that UART stop mode state is valid.
+ * @param __STOPMODE__: UART stop mode state.
+ * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid)
+ */
+#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \
+ ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE))
+
+/**
+ * @brief Ensure that UART wake-up selection is valid.
+ * @param __WAKE__: UART wake-up selection.
+ * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid)
+ */
+#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \
+ ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \
+ ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY))
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */
+
/**
* @}
*/
@@ -706,8 +800,8 @@
* @{
*/
/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime);
#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
-HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime);
HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
@@ -718,12 +812,10 @@
* @brief Extended UART Interrupt handling function
* @{
*/
-
+
/* IO operation functions ***************************************************/
-void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
-
#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC)
-void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
+void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart);
#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */
/**
* @}
@@ -749,16 +841,17 @@
/**
* @}
- */
+ */
+/* Private functions ---------------------------------------------------------*/
/**
* @}
- */
+ */
/**
* @}
- */
+ */
#ifdef __cplusplus
}
