mbed official
The official Mbed 2 C/C++ SDK provides the software platform and libraries to build your applications.
Dependents: hello SerialTestv11 SerialTestv12 Sierpinski ... more
mbed 2
This is the mbed 2 library. If you'd like to learn about Mbed OS please see the mbed-os docs.
Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_pcd.h
- Revision:
- 108:34e6b704fe68
- Parent:
- 93:e188a91d3eaa
- Child:
- 122:f9eeca106725
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_pcd.h Wed Sep 16 15:32:31 2015 +0100
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_pcd.h Fri Oct 02 07:35:07 2015 +0200
@@ -2,13 +2,13 @@
******************************************************************************
* @file stm32f0xx_hal_pcd.h
* @author MCD Application Team
- * @version V1.2.0
- * @date 11-December-2014
+ * @version V1.3.0
+ * @date 26-June-2015
* @brief Header file of PCD HAL module.
******************************************************************************
* @attention
*
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
@@ -62,25 +62,30 @@
*/
/**
- * @brief PCD State structures definition
+ * @brief PCD State structure definition
*/
typedef enum
{
- PCD_READY = 0x00,
- PCD_ERROR = 0x01,
- PCD_BUSY = 0x02,
- PCD_TIMEOUT = 0x03
+ HAL_PCD_STATE_RESET = 0x00,
+ HAL_PCD_STATE_READY = 0x01,
+ HAL_PCD_STATE_ERROR = 0x02,
+ HAL_PCD_STATE_BUSY = 0x03,
+ HAL_PCD_STATE_TIMEOUT = 0x04
} PCD_StateTypeDef;
+/**
+ * @brief PCD double buffered endpoint direction
+ */
typedef enum
{
- /* double buffered endpoint direction */
PCD_EP_DBUF_OUT,
PCD_EP_DBUF_IN,
PCD_EP_DBUF_ERR,
}PCD_EP_DBUF_DIR;
-/* endpoint buffer number */
+/**
+ * @brief PCD endpoint buffer number
+ */
typedef enum
{
PCD_EP_NOBUF,
@@ -93,31 +98,31 @@
*/
typedef struct
{
- uint32_t dev_endpoints; /*!< Device Endpoints number.
- This parameter depends on the used USB core.
- This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
-
- uint32_t speed; /*!< USB Core speed.
- This parameter can be any value of @ref PCD_Core_Speed */
-
- uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
- This parameter can be any value of @ref PCD_EP0_MPS */
-
- uint32_t phy_itface; /*!< Select the used PHY interface.
- This parameter can be any value of @ref PCD_Core_PHY */
-
- uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal.
- This parameter can be set to ENABLE or DISABLE */
-
- uint32_t low_power_enable; /*!< Enable or disable Low Power mode
- This parameter can be set to ENABLE or DISABLE */
-
- uint32_t lpm_enable; /*!< Enable or disable the Link Power Management .
- This parameter can be set to ENABLE or DISABLE */
-
- uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.
- This parameter can be set to ENABLE or DISABLE */
-
+ uint32_t dev_endpoints; /*!< Device Endpoints number.
+ This parameter depends on the used USB core.
+ This parameter must be a number between Min_Data = 1 and Max_Data = 15 */
+
+ uint32_t speed; /*!< USB Core speed.
+ This parameter can be any value of @ref PCD_Core_Speed */
+
+ uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size.
+ This parameter can be any value of @ref PCD_EP0_MPS */
+
+ uint32_t phy_itface; /*!< Select the used PHY interface.
+ This parameter can be any value of @ref PCD_Core_PHY */
+
+ uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal.
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t low_power_enable; /*!< Enable or disable Low Power mode
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t lpm_enable; /*!< Enable or disable the Link Power Management .
+ This parameter can be set to ENABLE or DISABLE */
+
+ uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.
+ This parameter can be set to ENABLE or DISABLE */
+
}PCD_InitTypeDef;
typedef struct
@@ -136,16 +141,13 @@
uint16_t pmaadress; /*!< PMA Address
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
-
-
+
uint16_t pmaaddr0; /*!< PMA Address0
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
-
-
+
uint16_t pmaaddr1; /*!< PMA Address1
This parameter can be any value between Min_addr = 0 and Max_addr = 1K */
-
-
+
uint8_t doublebuffer; /*!< Double buffer enable
This parameter can be 0 or 1 */
@@ -153,7 +155,6 @@
This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
uint8_t *xfer_buff; /*!< Pointer to transfer buffer */
-
uint32_t xfer_len; /*!< Current transfer length */
@@ -168,15 +169,15 @@
*/
typedef struct
{
- PCD_TypeDef *Instance; /*!< Register base address */
- PCD_InitTypeDef Init; /*!< PCD required parameters */
- __IO uint8_t USB_Address; /*!< USB Address */
- PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */
- PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */
- HAL_LockTypeDef Lock; /*!< PCD peripheral status */
- __IO PCD_StateTypeDef State; /*!< PCD communication state */
- uint32_t Setup[12]; /*!< Setup packet buffer */
- void *pData; /*!< Pointer to upper stack Handler */
+ PCD_TypeDef *Instance; /*!< Register base address */
+ PCD_InitTypeDef Init; /*!< PCD required parameters */
+ __IO uint8_t USB_Address; /*!< USB Address */
+ PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */
+ HAL_LockTypeDef Lock; /*!< PCD peripheral status */
+ __IO PCD_StateTypeDef State; /*!< PCD communication state */
+ uint32_t Setup[12]; /*!< Setup packet buffer */
+ void *pData; /*!< Pointer to upper stack Handler */
} PCD_HandleTypeDef;
@@ -184,7 +185,9 @@
* @}
*/
-#include "stm32f0xx_hal_pcd_ex.h"
+/* Include PCD HAL Extension module */
+#include "stm32f0xx_hal_pcd_ex.h"
+
/* Exported constants --------------------------------------------------------*/
/** @defgroup PCD_Exported_Constants PCD Exported Constants
* @{
@@ -206,6 +209,112 @@
/**
* @}
*/
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
+
+#define __HAL_USB_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_WAKEUP_EXTI_LINE
+#define __HAL_USB_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_WAKEUP_EXTI_LINE)
+#define __HAL_USB_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
+
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup PCD_Exported_Functions PCD Exported Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions ********************************/
+/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* I/O operation functions ***************************************************/
+/* Non-Blocking mode: Interrupt */
+/** @addtogroup PCD_Exported_Functions_Group2 IO operation functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
+
+void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
+void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
+void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral Control functions **********************************************/
+/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
+HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
+HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
+uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
+HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/* Peripheral State functions ************************************************/
+/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
+ * @{
+ */
+PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Private constants ---------------------------------------------------------*/
+/** @defgroup PCD_Private_Constants PCD Private Constants
+ * @{
+ */
+/** @defgroup USB_EXTI_Line_Interrupt USB EXTI line interrupt
+ * @{
+ */
+#define USB_WAKEUP_EXTI_LINE ((uint32_t)EXTI_IMR_MR18) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
+/**
+ * @}
+ */
/** @defgroup PCD_EP0_MPS PCD EP0 MPS
* @{
@@ -226,63 +335,44 @@
/** @defgroup PCD_EP_Type PCD EP Type
* @{
*/
-#define PCD_EP_TYPE_CTRL 0
-#define PCD_EP_TYPE_ISOC 1
-#define PCD_EP_TYPE_BULK 2
-#define PCD_EP_TYPE_INTR 3
+#define PCD_EP_TYPE_CTRL 0
+#define PCD_EP_TYPE_ISOC 1
+#define PCD_EP_TYPE_BULK 2
+#define PCD_EP_TYPE_INTR 3
/**
* @}
*/
-/** @defgroup PCD_ENDP_Type PCD_ENDP_Type
+/** @defgroup PCD_ENDP PCD ENDP
* @{
*/
+#define PCD_ENDP0 ((uint8_t)0)
+#define PCD_ENDP1 ((uint8_t)1)
+#define PCD_ENDP2 ((uint8_t)2)
+#define PCD_ENDP3 ((uint8_t)3)
+#define PCD_ENDP4 ((uint8_t)4)
+#define PCD_ENDP5 ((uint8_t)5)
+#define PCD_ENDP6 ((uint8_t)6)
+#define PCD_ENDP7 ((uint8_t)7)
+/**
+ * @}
+ */
-#define PCD_ENDP0 ((uint8_t)0)
-#define PCD_ENDP1 ((uint8_t)1)
-#define PCD_ENDP2 ((uint8_t)2)
-#define PCD_ENDP3 ((uint8_t)3)
-#define PCD_ENDP4 ((uint8_t)4)
-#define PCD_ENDP5 ((uint8_t)5)
-#define PCD_ENDP6 ((uint8_t)6)
-#define PCD_ENDP7 ((uint8_t)7)
-
-/* Endpoint Kind */
-#define PCD_SNG_BUF 0
-#define PCD_DBL_BUF 1
-
-#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
+/** @defgroup PCD_ENDP_Kind PCD Endpoint Kind
+ * @{
+ */
+#define PCD_SNG_BUF 0
+#define PCD_DBL_BUF 1
/**
* @}
- */
+ */
/**
* @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-
-/** @defgroup PCD_Exported_Macros PCD Exported Macros
- * @brief macros to handle interrupts and specific clock configurations
- * @{
*/
-#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
-
-#define USB_EXTI_LINE_WAKEUP ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
-#define __HAL_USB_EXTI_ENABLE_IT() EXTI->IMR |= USB_EXTI_LINE_WAKEUP
-#define __HAL_USB_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_EXTI_LINE_WAKEUP)
-#define __HAL_USB_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
-
-/**
- * @}
- */
-
-/* Internal macros -----------------------------------------------------------*/
-
-/** @defgroup PCD_Private_Macros PCD Private Macros
- * @brief macros to handle interrupts and specific clock configurations
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup PCD_Private_Macros PCD Private Macros
* @{
*/
@@ -662,7 +752,7 @@
{PCD_SET_EP_RX_CNT((USBx), (bEpNum),(wCount));}\
else if((bDir) == PCD_EP_DBUF_IN)\
/* IN endpoint */\
- *PCD_EP_RX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
+ *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
} /* SetEPDblBuf1Count */
#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\
@@ -679,81 +769,10 @@
#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum)))
#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum)))
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup PCD_Exported_Functions
- * @{
- */
-
-/** @addtogroup PCD_Exported_Functions_Group1
- * @{
- */
-/* Initialization and de-initialization functions **********************************/
-HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
-void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
-
-/**
- * @}
- */
-
-/** @addtogroup PCD_Exported_Functions_Group2
+/** @defgroup PCD_Instance_definition PCD Instance definition
* @{
*/
-/* IO operation functions *****************************************************/
- /* Non Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
-
-void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
-
-/**
- * @}
- */
-
-/** @addtogroup PCD_Exported_Functions_Group3
- * @{
- */
-/* Peripheral Control functions ************************************************/
-HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
-HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
-HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
-HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
-uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
-/**
- * @}
- */
-
-/** @addtogroup PCD_Exported_Functions_Group4
- * @{
- */
-/* Peripheral State functions **************************************************/
-PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
/**
* @}
*/
