Diff: cmsis/BUILD/mbed/TARGET_NUCLEO_F413ZH/TOOLCHAIN_IAR/PeripheralNames.h

Revision:

189:f392fc9709a3

diff -r bcfe06ba3d64 -r f392fc9709a3 cmsis/BUILD/mbed/TARGET_NUCLEO_F413ZH/TOOLCHAIN_IAR/PeripheralNames.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/cmsis/BUILD/mbed/TARGET_NUCLEO_F413ZH/TOOLCHAIN_IAR/PeripheralNames.h	Wed Feb 20 22:31:08 2019 +0000
@@ -0,0 +1,90 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2016 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    ADC_1 = (int)ADC1_BASE
+} ADCName;
+
+typedef enum {
+    DAC_1 = (int)DAC_BASE
+} DACName;
+
+typedef enum {
+    UART_1  = (int)USART1_BASE,
+    UART_2  = (int)USART2_BASE,
+    UART_3  = (int)USART3_BASE,
+    UART_4  = (int)UART4_BASE,
+    UART_5  = (int)UART5_BASE,
+    UART_6  = (int)USART6_BASE,
+    UART_7  = (int)UART7_BASE,
+    UART_8  = (int)UART8_BASE,
+    UART_9  = (int)UART9_BASE,
+    UART_10 = (int)UART10_BASE
+} UARTName;
+
+typedef enum {
+    SPI_1 = (int)SPI1_BASE,
+    SPI_2 = (int)SPI2_BASE,
+    SPI_3 = (int)SPI3_BASE,
+    SPI_4 = (int)SPI4_BASE,
+    SPI_5 = (int)SPI5_BASE
+} SPIName;
+
+typedef enum {
+    I2C_1    = (int)I2C1_BASE,
+    I2C_2    = (int)I2C2_BASE,
+    I2C_3    = (int)I2C3_BASE,
+    FMPI2C_1 = (int)FMPI2C1_BASE
+} I2CName;
+
+typedef enum {
+    PWM_1  = (int)TIM1_BASE,
+    PWM_2  = (int)TIM2_BASE,
+    PWM_3  = (int)TIM3_BASE,
+    PWM_4  = (int)TIM4_BASE,
+    PWM_5  = (int)TIM5_BASE,
+    PWM_8  = (int)TIM8_BASE,
+    PWM_9  = (int)TIM9_BASE,
+    PWM_10 = (int)TIM10_BASE,
+    PWM_11 = (int)TIM11_BASE,
+    PWM_12 = (int)TIM12_BASE,
+    PWM_13 = (int)TIM13_BASE,
+    PWM_14 = (int)TIM14_BASE
+} PWMName;
+
+typedef enum {
+    CAN_1 = (int)CAN1_BASE,
+    CAN_2 = (int)CAN2_BASE,
+    CAN_3 = (int)CAN3_BASE
+} CANName;
+
+typedef enum {
+    QSPI_1 = (int)QSPI_R_BASE,
+} QSPIName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif