mbed official
mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
targets/TARGET_STM/TARGET_STM32L0/device/stm32l0xx_hal_rtc_ex.h
- Committer:
- AnnaBridge
- Date:
- 2019-02-20
- Revision:
- 189:f392fc9709a3
- Parent:
- 186:707f6e361f3e
File content as of revision 189:f392fc9709a3:
/**
******************************************************************************
* @file stm32l0xx_hal_rtc_ex.h
* @author MCD Application Team
* @brief Header file of RTC HAL Extended module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32L0xx_HAL_RTC_EX_H
#define __STM32L0xx_HAL_RTC_EX_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32l0xx_hal_def.h"
/** @addtogroup STM32L0xx_HAL_Driver
* @{
*/
/** @defgroup RTCEx RTCEx
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup RTCEx_Exported_Types RTCEx Exported Types
* @{
*/
/**
* @brief RTC Tamper structure definition
*/
typedef struct
{
uint32_t Tamper; /*!< Specifies the Tamper Pin.
This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */
uint32_t Interrupt; /*!< Specifies the Tamper Interrupt.
This parameter can be a value of @ref RTCEx_Tamper_Interrupt_Definitions */
uint32_t Trigger; /*!< Specifies the Tamper Trigger.
This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */
uint32_t NoErase; /*!< Specifies the Tamper no erase mode.
This parameter can be a value of @ref RTCEx_Tamper_EraseBackUp_Definitions */
uint32_t MaskFlag; /*!< Specifies the Tamper Flag masking.
This parameter can be a value of @ref RTCEx_Tamper_MaskFlag_Definitions */
uint32_t Filter; /*!< Specifies the RTC Filter Tamper.
This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */
uint32_t SamplingFrequency; /*!< Specifies the sampling frequency.
This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */
uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration .
This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */
uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp .
This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */
uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection.
This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */
}RTC_TamperTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants
* @{
*/
/** @defgroup RTCEx_Output_selection_Definitions RTCEx Output Selection Definition
* @{
*/
#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000U)
#define RTC_OUTPUT_ALARMA ((uint32_t)RTC_CR_OSEL_0)
#define RTC_OUTPUT_ALARMB ((uint32_t)RTC_CR_OSEL_1)
#define RTC_OUTPUT_WAKEUP ((uint32_t)RTC_CR_OSEL)
/**
* @}
*/
/** @defgroup RTCEx_Backup_Registers_Definitions RTCEx Backup Registers Definition
* @{
*/
#define RTC_BKP_DR0 ((uint32_t)0x00000000U)
#define RTC_BKP_DR1 ((uint32_t)0x00000001U)
#define RTC_BKP_DR2 ((uint32_t)0x00000002U)
#define RTC_BKP_DR3 ((uint32_t)0x00000003U)
#define RTC_BKP_DR4 ((uint32_t)0x00000004U)
/**
* @}
*/
/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTCEx Time Stamp Edges definition
* @{
*/
#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000U)
#define RTC_TIMESTAMPEDGE_FALLING RTC_CR_TSEDGE
/**
* @}
*/
/** @defgroup RTCEx_TimeStamp_Pin_Selections RTCEx TimeStamp Pin Selection
* @{
*/
#define RTC_TIMESTAMPPIN_DEFAULT ((uint32_t)0x00000000U)
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Pins_Definitions RTCEx Tamper Pins Definition
* @{
*/
#if defined (STM32L063xx) || defined (STM32L062xx) || defined (STM32L061xx) || \
defined (STM32L053xx) || defined (STM32L052xx) || defined (STM32L051xx) ||\
defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
defined (STM32L031xx) || defined (STM32L041xx)
#define RTC_TAMPER_1 RTC_TAMPCR_TAMP1E
#endif /* (STM32L063xx) || (STM32L062xx) || (STM32L061xx) ||
* (STM32L053xx) || (STM32L052xx) || (STM32L051xx) ||
* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
* (STM32L073xx) || (STM32L072xx) || (STM32L071xx) ||
* (STM32L031xx) || (STM32L041xx)
*/
#define RTC_TAMPER_2 RTC_TAMPCR_TAMP2E
#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx)
#define RTC_TAMPER_3 RTC_TAMPCR_TAMP3E
#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
* (STM32L073xx) || (STM32L072xx) || (STM32L071xx) || (STM32L031xx) || (STM32L041xx) ||
* (STM32L011xx) || (STM32L021xx)
*/
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Interrupt_Definitions RTCEx Tamper Interrupt Definitions
* @{
*/
#if defined (STM32L063xx) || defined (STM32L062xx) || defined (STM32L061xx) || \
defined (STM32L053xx) || defined (STM32L052xx) || defined (STM32L051xx) ||\
defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
defined (STM32L031xx) || defined (STM32L041xx)
#define RTC_TAMPER1_INTERRUPT RTC_TAMPCR_TAMP1IE
#endif /* (STM32L063xx) || (STM32L062xx) || (STM32L061xx) ||
* (STM32L053xx) || (STM32L052xx) || (STM32L051xx) ||
* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
* (STM32L073xx) || (STM32L072xx) || (STM32L071xx) ||
* (STM32L031xx) || (STM32L041xx)
*/
#define RTC_TAMPER2_INTERRUPT RTC_TAMPCR_TAMP2IE
#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx)
#define RTC_TAMPER3_INTERRUPT RTC_TAMPCR_TAMP3IE
#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
* (STM32L073xx) || (STM32L072xx) || (STM32L071xx) || (STM32L031xx) || (STM32L041xx) ||
* (STM32L011xx) || (STM32L021xx)
*/
#define RTC_ALL_TAMPER_INTERRUPT RTC_TAMPCR_TAMPIE
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Trigger_Definitions RTCEx Tamper Trigger Definitions
* @{
*/
#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000U)
#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002U)
#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE
#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE
/**
* @}
*/
/** @defgroup RTCEx_Tamper_EraseBackUp_Definitions RTCEx Tamper EraseBackUp Definitions
* @{
*/
#define RTC_TAMPER_ERASE_BACKUP_ENABLE ((uint32_t)0x00000000U)
#define RTC_TAMPER_ERASE_BACKUP_DISABLE ((uint32_t)0x00020000U)
/**
* @}
*/
/** @defgroup RTCEx_Tamper_MaskFlag_Definitions RTCEx Tamper MaskFlag Definitions
* @{
*/
#define RTC_TAMPERMASK_FLAG_DISABLE ((uint32_t)0x00000000U)
#define RTC_TAMPERMASK_FLAG_ENABLE ((uint32_t)0x00040000U)
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Filter_Definitions RTCEx Tamper Filter Definitions
* @{
*/
#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000U) /*!< Tamper filter is disabled */
#define RTC_TAMPERFILTER_2SAMPLE RTC_TAMPCR_TAMPFLT_0 /*!< Tamper is activated after 2
consecutive samples at the active level */
#define RTC_TAMPERFILTER_4SAMPLE RTC_TAMPCR_TAMPFLT_1 /*!< Tamper is activated after 4
consecutive samples at the active level */
#define RTC_TAMPERFILTER_8SAMPLE RTC_TAMPCR_TAMPFLT /*!< Tamper is activated after 8
consecutive samples at the active leve. */
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTCEx Tamper Sampling Frequencies Definitions
* @{
*/
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000U) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 32768 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 RTC_TAMPCR_TAMPFREQ_0 /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 16384 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 RTC_TAMPCR_TAMPFREQ_1 /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 8192 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t) (RTC_TAMPCR_TAMPFREQ_0 | RTC_TAMPCR_TAMPFREQ_1)) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 4096 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 RTC_TAMPCR_TAMPFREQ_2 /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 2048 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t) (RTC_TAMPCR_TAMPFREQ_0 | RTC_TAMPCR_TAMPFREQ_2)) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 1024 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t) (RTC_TAMPCR_TAMPFREQ_1 | RTC_TAMPCR_TAMPFREQ_2)) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 512 */
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t) (RTC_TAMPCR_TAMPFREQ_0 | RTC_TAMPCR_TAMPFREQ_1 | \
RTC_TAMPCR_TAMPFREQ_2)) /*!< Each of the tamper inputs are sampled
with a frequency = RTCCLK / 256 */
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTCEx Tamper Pin Precharge Duration Definitions
* @{
*/
#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000U) /*!< Tamper pins are pre-charged before
sampling during 1 RTCCLK cycle */
#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK RTC_TAMPCR_TAMPPRCH_0 /*!< Tamper pins are pre-charged before
sampling during 2 RTCCLK cycles */
#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK RTC_TAMPCR_TAMPPRCH_1 /*!< Tamper pins are pre-charged before
sampling during 4 RTCCLK cycles */
#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)(RTC_TAMPCR_TAMPPRCH_0 | RTC_TAMPCR_TAMPPRCH_1)) /*!< Tamper pins are pre-charged before
sampling during 8 RTCCLK cycles */
/**
* @}
*/
/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTCEx Tamper TimeStampOnTamperDetection Definitions
* @{
*/
#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE RTC_TAMPCR_TAMPTS /*!< TimeStamp on Tamper Detection event saved */
#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000U) /*!< TimeStamp on Tamper Detection event is not saved */
/**
* @}
*/
/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTCEx Tamper Pull UP Definitions
* @{
*/
#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000U) /*!< Tamper pins are pre-charged before sampling */
#define RTC_TAMPER_PULLUP_DISABLE RTC_TAMPCR_TAMPPUDIS /*!< Tamper pins pre-charge is disabled */
/**
* @}
*/
/** @defgroup RTCEx_Wakeup_Timer_Definitions RTCEx Wakeup Timer Definitions
* @{
*/
#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000U)
#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 RTC_CR_WUCKSEL_0
#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 RTC_CR_WUCKSEL_1
#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t) (RTC_CR_WUCKSEL_0 | RTC_CR_WUCKSEL_1))
#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS RTC_CR_WUCKSEL_2
#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t) (RTC_CR_WUCKSEL_1 | RTC_CR_WUCKSEL_2))
/**
* @}
*/
/** @defgroup RTCEx_Smooth_calib_period_Definitions RTCEx Smooth calib period Definitions
* @{
*/
#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000U) /*!< If RTCCLK = 32768 Hz, Smooth calibation
period is 32s, else 2exp20 RTCCLK pulses */
#define RTC_SMOOTHCALIB_PERIOD_16SEC RTC_CALR_CALW16 /*!< If RTCCLK = 32768 Hz, Smooth calibation
period is 16s, else 2exp19 RTCCLK pulses */
#define RTC_SMOOTHCALIB_PERIOD_8SEC RTC_CALR_CALW8 /*!< If RTCCLK = 32768 Hz, Smooth calibation
period is 8s, else 2exp18 RTCCLK pulses */
/**
* @}
*/
/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTCEx Smooth calib Plus pulses Definitions
* @{
*/
#define RTC_SMOOTHCALIB_PLUSPULSES_SET RTC_CALR_CALP /*!< The number of RTCCLK pulses added
during a X -second window = Y - CALM[8:0]
with Y = 512, 256, 128 when X = 32, 16, 8 */
#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000U) /*!< The number of RTCCLK pulses subbstited
during a 32-second window = CALM[8:0] */
/**
* @}
*/
/** @defgroup RTCEx_Calib_Output_selection_Definitions RTCEx Calib Output selection Definitions
* @{
*/
#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000U)
#define RTC_CALIBOUTPUT_1HZ RTC_CR_COSEL
/**
* @}
*/
/** @defgroup RTCEx_Add_1_Second_Parameter_Definition RTCEx Add 1 Second Parameter Definitions
* @{
*/
#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000U)
#define RTC_SHIFTADD1S_SET RTC_SHIFTR_ADD1S
/**
* @}
*/
/** @defgroup RTCEx_Interrupts_Definitions RTCEx Interrupts Definitions
* @{
*/
#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx)
#define RTC_IT_TAMP3 ((uint32_t)RTC_TAMPCR_TAMP3IE)
#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
* (STM32L073xx) || (STM32L072xx) || (STM32L071xx) || (STM32L031xx) || (STM32L041xx) ||
* (STM32L011xx) || (STM32L021xx)
*/
/**
* @}
*/
/** @defgroup RTCEx_Flags_Definitions RTCEx Flags Definitions
* @{
*/
#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx)
#define RTC_FLAG_TAMP3F ((uint32_t)RTC_ISR_TAMP3F)
#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
* (STM32L073xx) || (STM32L072xx) || (STM32L071xx) || (STM32L031xx) || (STM32L041xx) ||
* (STM32L011xx) || (STM32L021xx)
*/
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros
* @{
*/
/* ---------------------------------WAKEUPTIMER---------------------------------*/
/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer
* @{
*/
/**
* @brief Enable the RTC WakeUp Timer peripheral.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE))
/**
* @brief Disable the RTC WakeUp Timer peripheral.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE))
/**
* @brief Enable the RTC WakeUpTimer interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled.
* This parameter can be:
* @arg RTC_IT_WUT: WakeUpTimer interrupt
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
/**
* @brief Disable the RTC WakeUpTimer interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be disabled.
* This parameter can be:
* @arg RTC_IT_WUT: WakeUpTimer interrupt
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
/**
* @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt to check.
* This parameter can be:
* @arg RTC_IT_WUT: WakeUpTimer interrupt
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET) ? SET : RESET)
/**
* @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check.
* This parameter can be:
* @arg RTC_IT_WUT: WakeUpTimer interrupt
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
/**
* @brief Get the selected RTC WakeUpTimer's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC WakeUpTimer Flag is pending or not.
* This parameter can be:
* @arg RTC_FLAG_WUTF
* @arg RTC_FLAG_WUTWF
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
/**
* @brief Clear the RTC Wake Up timer's pending flags.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC WakeUpTimer Flag to clear.
* This parameter can be:
* @arg RTC_FLAG_WUTF
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
/* WAKE-UP TIMER EXTI */
/* ------------------ */
/**
* @brief Enable interrupt on the RTC WakeUp Timer associated Exti line.
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
/**
* @brief Disable interrupt on the RTC WakeUp Timer associated Exti line.
* @retval None
*/
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
/**
* @brief Enable event on the RTC WakeUp Timer associated Exti line.
* @retval None.
*/
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
/**
* @brief Disable event on the RTC WakeUp Timer associated Exti line.
* @retval None.
*/
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
/**
* @brief Enable falling edge trigger on the RTC WakeUp Timer associated Exti line.
* @retval None.
*/
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
/**
* @brief Disable falling edge trigger on the RTC WakeUp Timer associated Exti line.
* @retval None.
*/
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
/**
* @brief Enable rising edge trigger on the RTC WakeUp Timer associated Exti line.
* @retval None.
*/
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
/**
* @brief Disable rising edge trigger on the RTC WakeUp Timer associated Exti line.
* @retval None.
*/
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT))
/**
* @brief Enable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
* @retval None.
*/
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE(); \
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable rising & falling edge trigger on the RTC WakeUp Timer associated Exti line.
* This parameter can be:
* @retval None.
*/
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE(); \
__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Check whether the RTC WakeUp Timer associated Exti line interrupt flag is set or not.
* @retval Line Status.
*/
#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
/**
* @brief Clear the RTC WakeUp Timer associated Exti line flag.
* @retval None.
*/
#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
/**
* @brief Generate a Software interrupt on the RTC WakeUp Timer associated Exti line.
* @retval None.
*/
#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT)
/**
* @}
*/
/* ---------------------------------TIMESTAMP---------------------------------*/
/** @defgroup RTCEx_Timestamp RTC Timestamp
* @{
*/
/**
* @brief Enable the RTC TimeStamp peripheral.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE))
/**
* @brief Disable the RTC TimeStamp peripheral.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE))
/**
* @brief Enable the RTC TimeStamp interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC TimeStamp interrupt source to be enabled.
* This parameter can be:
* @arg RTC_IT_TS: TimeStamp interrupt
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
/**
* @brief Disable the RTC TimeStamp interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC TimeStamp interrupt source to be disabled.
* This parameter can be:
* @arg RTC_IT_TS: TimeStamp interrupt
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
/**
* @brief Check whether the specified RTC TimeStamp interrupt has occurred or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC TimeStamp interrupt to check.
* This parameter can be:
* @arg RTC_IT_TS: TimeStamp interrupt
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET) ? SET : RESET)
/**
* @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check.
* This parameter can be:
* @arg RTC_IT_TS: TimeStamp interrupt
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
/**
* @brief Get the selected RTC TimeStamp's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC TimeStamp Flag is pending or not.
* This parameter can be:
* @arg RTC_FLAG_TSF
* @arg RTC_FLAG_TSOVF
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
/**
* @brief Clear the RTC Time Stamp's pending flags.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Alarm Flag to clear.
* This parameter can be:
* @arg RTC_FLAG_TSF
* @retval None
*/
#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
/**
* @}
*/
/* ---------------------------------TAMPER------------------------------------*/
/** @defgroup RTCEx_Tamper RTC Tamper
* @{
*/
#if defined (STM32L063xx) || defined (STM32L062xx) || defined (STM32L061xx) || \
defined (STM32L053xx) || defined (STM32L052xx) || defined (STM32L051xx) ||\
defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
defined (STM32L031xx) || defined (STM32L041xx)
/**
* @brief Enable the RTC Tamper1 input detection.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP1E))
/**
* @brief Disable the RTC Tamper1 input detection.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP1E))
#endif /* (STM32L063xx) || (STM32L062xx) || (STM32L061xx) ||
* (STM32L053xx) || (STM32L052xx) || (STM32L051xx) ||
* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
* (STM32L073xx) || (STM32L072xx) || (STM32L071xx) ||
* (STM32L031xx) || (STM32L041xx)
*/
/**
* @brief Enable the RTC Tamper2 input detection.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP2E))
/**
* @brief Disable the RTC Tamper2 input detection.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP2E))
#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx)
/**
* @brief Enable the RTC Tamper3 input detection.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_TAMPER3_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR |= (RTC_TAMPCR_TAMP3E))
/**
* @brief Disable the RTC Tamper3 input detection.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_TAMPER3_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAMPCR &= ~(RTC_TAMPCR_TAMP3E))
#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
* (STM32L073xx) || (STM32L072xx) || (STM32L071xx) || (STM32L031xx) || (STM32L041xx) ||
* (STM32L011xx) || (STM32L021xx)
*/
/**************************************************************************************************/
#if defined (STM32L063xx) || defined (STM32L062xx) || defined (STM32L061xx) || \
defined (STM32L053xx) || defined (STM32L052xx) || defined (STM32L051xx)
/**
* @brief Enable the RTC Tamper interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_TAMP: All tampers interrupts
* @arg RTC_IT_TAMP1: Tamper1 interrupt
* @arg RTC_IT_TAMP2: Tamper2 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__))
/**
* @brief Disable the RTC Tamper interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_TAMP: All tampers interrupts
* @arg RTC_IT_TAMP1: Tamper1 interrupt
* @arg RTC_IT_TAMP2: Tamper2 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__))
#elif defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
defined (STM32L031xx) || defined (STM32L041xx)
/**
* @brief Enable the RTC Tamper interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_TAMP: All tampers interrupts
* @arg RTC_IT_TAMP1: Tamper1 interrupt
* @arg RTC_IT_TAMP2: Tamper2 interrupt
* @arg RTC_IT_TAMP3: Tamper3 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__))
/**
* @brief Disable the RTC Tamper interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_TAMP: All tampers interrupts
* @arg RTC_IT_TAMP1: Tamper1 interrupt
* @arg RTC_IT_TAMP2: Tamper2 interrupt
* @arg RTC_IT_TAMP3: Tamper3 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__))
#elif defined (STM32L011xx) || defined (STM32L021xx)
/**
* @brief Enable the RTC Tamper interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be enabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_TAMP: All tampers interrupts
* @arg RTC_IT_TAMP2: Tamper2 interrupt
* @arg RTC_IT_TAMP3: Tamper3 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR |= (__INTERRUPT__))
/**
* @brief Disable the RTC Tamper interrupt.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt sources to be disabled.
* This parameter can be any combination of the following values:
* @arg RTC_IT_TAMP: All tampers interrupts
* @arg RTC_IT_TAMP2: Tamper2 interrupt
* @arg RTC_IT_TAMP3: Tamper3 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->TAMPCR &= ~(__INTERRUPT__))
#endif /* (STM32L011xx) || (STM32L021xx)
*/
/**************************************************************************************************/
#if defined (STM32L063xx) || defined (STM32L062xx) || defined (STM32L061xx) || \
defined (STM32L053xx) || defined (STM32L052xx) || defined (STM32L051xx)
/**
* @brief Check whether the specified RTC Tamper interrupt has occurred or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt to check.
* This parameter can be:
* @arg RTC_IT_TAMP1: Tamper1 interrupt
* @arg RTC_IT_TAMP2: Tamper2 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3U)) != RESET) ? SET : RESET) : \
((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5U)) != RESET) ? SET : RESET))
#elif defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
defined (STM32L031xx) || defined (STM32L041xx)
/**
* @brief Check whether the specified RTC Tamper interrupt has occurred or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt to check.
* This parameter can be:
* @arg RTC_IT_TAMP1: Tamper1 interrupt
* @arg RTC_IT_TAMP2: Tamper2 interrupt
* @arg RTC_IT_TAMP3: Tamper3 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP1) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 3U)) != RESET) ? SET : RESET) : \
((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5U)) != RESET) ? SET : RESET) : \
((__INTERRUPT__) == RTC_IT_TAMP3) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 7U)) != RESET) ? SET : RESET))
#elif defined (STM32L011xx) || defined (STM32L021xx)
/**
* @brief Check whether the specified RTC Tamper interrupt has occurred or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt to check.
* This parameter can be:
* @arg RTC_IT_TAMP2: Tamper2 interrupt
* @arg RTC_IT_TAMP3: Tamper3 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) == RTC_IT_TAMP2) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 5U)) != RESET) ? SET : RESET) : \
((__INTERRUPT__) == RTC_IT_TAMP3) ? (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 7U)) != RESET) ? SET : RESET))
#endif /* (STM32L011xx) || (STM32L021xx)
*/
/**************************************************************************************************/
#if defined (STM32L063xx) || defined (STM32L062xx) || defined (STM32L061xx) || \
defined (STM32L053xx) || defined (STM32L052xx) || defined (STM32L051xx)
/**
* @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
* This parameter can be:
* @arg RTC_IT_TAMP: All tampers interrupts
* @arg RTC_IT_TAMP1: Tamper1 interrupt
* @arg RTC_IT_TAMP2: Tamper2 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
/**
* @brief Get the selected RTC Tamper's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Tamper Flag is pending or not.
* This parameter can be:
* @arg RTC_FLAG_TAMP1F: Tamper1 flag
* @arg RTC_FLAG_TAMP2F: Tamper2 flag
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
/**
* @brief Clear the RTC Tamper's pending flags.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Tamper Flag to clear.
* This parameter can be:
* @arg RTC_FLAG_TAMP1F: Tamper1 flag
* @arg RTC_FLAG_TAMP2F: Tamper2 flag
* @retval None
*/
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
#elif defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
defined (STM32L031xx) || defined (STM32L041xx)
/**
* @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
* This parameter can be:
* @arg RTC_IT_TAMP: All tampers interrupts
* @arg RTC_IT_TAMP1: Tamper1 interrupt
* @arg RTC_IT_TAMP2: Tamper2 interrupt
* @arg RTC_IT_TAMP3: Tamper3 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
/**
* @brief Get the selected RTC Tamper's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Tamper Flag is pending or not.
* This parameter can be:
* @arg RTC_FLAG_TAMP1F: Tamper1 flag
* @arg RTC_FLAG_TAMP2F: Tamper2 flag
* @arg RTC_FLAG_TAMP3F: Tamper3 flag
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
/**
* @brief Clear the RTC Tamper's pending flags.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Tamper Flag to clear.
* This parameter can be:
* @arg RTC_FLAG_TAMP1F: Tamper1 flag
* @arg RTC_FLAG_TAMP2F: Tamper2 flag
* @arg RTC_FLAG_TAMP3F: Tamper3 flag
* @retval None
*/
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
#elif defined (STM32L011xx) || defined (STM32L021xx)
/**
* @brief Check whether the specified RTC Tamper interrupt has been enabled or not.
* @param __HANDLE__: specifies the RTC handle.
* @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check.
* This parameter can be:
* @arg RTC_IT_TAMP: All tampers interrupts
* @arg RTC_IT_TAMP2: Tamper2 interrupt
* @arg RTC_IT_TAMP3: Tamper3 interrupt
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAMPCR) & (__INTERRUPT__)) != RESET) ? SET : RESET)
/**
* @brief Get the selected RTC Tamper's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Tamper Flag is pending or not.
* This parameter can be:
* @arg RTC_FLAG_TAMP2F: Tamper2 flag
* @arg RTC_FLAG_TAMP3F: Tamper3 flag
* @retval None
*/
#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET) ? SET : RESET)
/**
* @brief Clear the RTC Tamper's pending flags.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC Tamper Flag to clear.
* This parameter can be:
* @arg RTC_FLAG_TAMP2F: Tamper2 flag
* @arg RTC_FLAG_TAMP3F: Tamper3 flag
* @retval None
*/
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT))
#endif /* (STM32L011xx) || (STM32L021xx)
*/
/**************************************************************************************************/
/**
* @}
*/
/* --------------------------TAMPER/TIMESTAMP---------------------------------*/
/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI
* @{
*/
/* TAMPER TIMESTAMP EXTI */
/* --------------------- */
/**
* @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line.
* @retval None
*/
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
/**
* @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line.
* @retval None
*/
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
/**
* @brief Enable event on the RTC Tamper and Timestamp associated Exti line.
* @retval None.
*/
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
/**
* @brief Disable event on the RTC Tamper and Timestamp associated Exti line.
* @retval None.
*/
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
/**
* @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
* @retval None.
*/
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
/**
* @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
* @retval None.
*/
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
/**
* @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
* @retval None.
*/
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
/**
* @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line.
* @retval None.
*/
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT))
/**
* @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
* @retval None.
*/
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { \
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE(); \
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line.
* This parameter can be:
* @retval None.
*/
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { \
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE(); \
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); \
} while(0U)
/**
* @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not.
* @retval Line Status.
*/
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
/**
* @brief Clear the RTC Tamper and Timestamp associated Exti line flag.
* @retval None.
*/
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
/**
* @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line
* @retval None.
*/
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)
/**
* @}
*/
/* ------------------------------Calibration----------------------------------*/
/** @defgroup RTCEx_Calibration RTC Calibration
* @{
*/
/**
* @brief Enable the RTC calibration output.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE))
/**
* @brief Disable the calibration output.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE))
/**
* @brief Enable the clock reference detection.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON))
/**
* @brief Disable the clock reference detection.
* @param __HANDLE__: specifies the RTC handle.
* @retval None
*/
#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON))
/**
* @brief Get the selected RTC shift operation's flag status.
* @param __HANDLE__: specifies the RTC handle.
* @param __FLAG__: specifies the RTC shift operation Flag is pending or not.
* This parameter can be:
* @arg RTC_FLAG_SHPF
* @retval None
*/
#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET)
/**
* @}
*/
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
* @{
*/
/* RTC TimeStamp and Tamper functions *****************************************/
/** @defgroup RTCEx_Exported_Functions_Group1 Extended RTC TimeStamp and Tamper functions
* @{
*/
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin);
HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format);
HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper);
HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper);
void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc);
#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx)
void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc);
#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
* (STM32L073xx) || (STM32L072xx) || (STM32L071xx) || (STM32L031xx) || (STM32L041xx) ||
* (STM32L011xx) || (STM32L021xx)
*/
void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
#if defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
defined (STM32L031xx) || defined (STM32L041xx) || defined (STM32L011xx) || defined (STM32L021xx)
HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
#endif /* (STM32L083xx) || (STM32L082xx) || (STM32L081xx) ||
* (STM32L073xx) || (STM32L072xx) || (STM32L071xx) || (STM32L031xx) || (STM32L041xx) ||
* (STM32L011xx) || (STM32L021xx)
*/
/**
* @}
*/
/* RTC Wake-up functions ******************************************************/
/** @defgroup RTCEx_Exported_Functions_Group2 Extended RTC Wake-up functions
* @{
*/
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock);
uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc);
uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc);
void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
/**
* @}
*/
/* Extended Control functions ************************************************/
/** @defgroup RTCEx_Exported_Functions_Group3 Extended Peripheral Control functions
* @{
*/
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data);
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister);
HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmoothCalibMinusPulsesValue);
HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS);
HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput);
HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc);
/**
* @}
*/
/* Extended RTC features functions *******************************************/
/** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions
* @{
*/
void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc);
HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout);
/**
* @}
*/
/**
* @}
*/
/* Private types -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private constants ---------------------------------------------------------*/
/** @defgroup RTCEx_Private_Constants RTCEx Private Constants
* @{
*/
/* Masks Definition */
#if defined (STM32L063xx) || defined (STM32L062xx) || defined (STM32L061xx) || \
defined (STM32L053xx) || defined (STM32L052xx) || defined (STM32L051xx)
#define RTC_FLAGS_MASK ((uint32_t) (RTC_FLAG_RECALPF | RTC_FLAG_TAMP2F | RTC_FLAG_TAMP1F| \
RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \
RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | \
RTC_FLAG_INITF | RTC_FLAG_RSF | RTC_FLAG_INITS | \
RTC_FLAG_SHPF | RTC_FLAG_WUTWF |RTC_FLAG_ALRBWF | \
RTC_FLAG_ALRAWF))
#define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP2E | RTC_TAMPCR_TAMP1E))
#define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER1_INTERRUPT | RTC_TAMPER2_INTERRUPT | \
RTC_ALL_TAMPER_INTERRUPT))
#elif defined (STM32L083xx) || defined (STM32L082xx) || defined (STM32L081xx) || \
defined (STM32L073xx) || defined (STM32L072xx) || defined (STM32L071xx) || \
defined (STM32L031xx) || defined (STM32L041xx)
#define RTC_FLAGS_MASK ((uint32_t) (RTC_FLAG_RECALPF | RTC_FLAG_TAMP3F | RTC_FLAG_TAMP2F | \
RTC_FLAG_TAMP1F| RTC_FLAG_TSOVF | RTC_FLAG_TSF | \
RTC_FLAG_WUTF | RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | \
RTC_FLAG_INITF | RTC_FLAG_RSF | \
RTC_FLAG_INITS | RTC_FLAG_SHPF | RTC_FLAG_WUTWF | \
RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF))
#define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP3E | RTC_TAMPCR_TAMP2E | RTC_TAMPCR_TAMP1E))
#define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER1_INTERRUPT | RTC_TAMPER2_INTERRUPT | \
RTC_TAMPER3_INTERRUPT | RTC_ALL_TAMPER_INTERRUPT))
#elif defined (STM32L011xx) || defined (STM32L021xx)
#define RTC_FLAGS_MASK ((uint32_t) (RTC_FLAG_RECALPF | RTC_FLAG_TAMP3F | RTC_FLAG_TAMP2F | \
RTC_FLAG_TSOVF | RTC_FLAG_TSF | \
RTC_FLAG_WUTF | RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | \
RTC_FLAG_INITF | RTC_FLAG_RSF | \
RTC_FLAG_INITS | RTC_FLAG_SHPF | RTC_FLAG_WUTWF | \
RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF))
#define RTC_TAMPCR_TAMPXE ((uint32_t) (RTC_TAMPCR_TAMP3E | RTC_TAMPCR_TAMP2E))
#define RTC_TAMPCR_TAMPXIE ((uint32_t) (RTC_TAMPER2_INTERRUPT | \
RTC_TAMPER3_INTERRUPT | RTC_ALL_TAMPER_INTERRUPT))
#endif /* (STM32L011xx) || (STM32L021xx)
*/
#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_IM19) /*!< External interrupt line 19 Connected to the RTC Tamper and Time Stamp events */
#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_IM20) /*!< External interrupt line 20 Connected to the RTC Wakeup event */
/**
* @}
*/
/* Private macros ------------------------------------------------------------*/
/** @defgroup RTCEx_Private_Macros RTCEx Private Macros
* @{
*/
/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters
* @{
*/
#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \
((OUTPUT) == RTC_OUTPUT_ALARMA) || \
((OUTPUT) == RTC_OUTPUT_ALARMB) || \
((OUTPUT) == RTC_OUTPUT_WAKEUP))
#define IS_RTC_BKP(BKP) ((BKP) < (uint32_t) RTC_BKP_NUMBER)
#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \
((EDGE) == RTC_TIMESTAMPEDGE_FALLING))
#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)(0xFFFFFFFFU ^ RTC_TAMPCR_TAMPXE))) == 0x00U) && ((TAMPER) != (uint32_t)RESET))
#define IS_RTC_TAMPER_INTERRUPT(INTERRUPT) ((((INTERRUPT) & (uint32_t)(0xFFFFFFFFU ^ RTC_TAMPCR_TAMPXIE)) == 0x00U) && ((INTERRUPT) != (uint32_t)RESET))
#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT))
#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \
((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \
((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \
((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL))
#define IS_RTC_TAMPER_ERASE_MODE(MODE) (((MODE) == RTC_TAMPER_ERASE_BACKUP_ENABLE) || \
((MODE) == RTC_TAMPER_ERASE_BACKUP_DISABLE))
#define IS_RTC_TAMPER_MASKFLAG_STATE(STATE) (((STATE) == RTC_TAMPERMASK_FLAG_ENABLE) || \
((STATE) == RTC_TAMPERMASK_FLAG_DISABLE))
#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \
((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \
((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \
((FILTER) == RTC_TAMPERFILTER_8SAMPLE))
#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256))
#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \
((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \
((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \
((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK))
#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \
((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE))
#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \
((STATE) == RTC_TAMPER_PULLUP_DISABLE))
#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS))
#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= RTC_WUTR_WUT)
#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \
((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \
((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC))
#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \
((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET))
/** @defgroup RTCEx_Smooth_calib_Minus_pulses_Definitions RTCEx Smooth calib Minus pulses Definitions
* @{
*/
#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= RTC_CALR_CALM)
/**
* @}
*/
#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \
((SEL) == RTC_SHIFTADD1S_SET))
/** @defgroup RTCEx_Substract_Fraction_Of_Second_Value RTCEx Substract Fraction Of Second Value
* @{
*/
#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= RTC_SHIFTR_SUBFS)
/**
* @}
*/
#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \
((OUTPUT) == RTC_CALIBOUTPUT_1HZ))
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32L0xx_HAL_RTC_EX_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
