File content as of revision 189:f392fc9709a3:

/**************************************************
 *
 * Part one of the system initialization code, contains low-level
 * initialization, plain thumb variant.
 *
 * Copyright 2011 IAR Systems. All rights reserved.
 *
 * $Revision: 47876 $
 *
 **************************************************/

;
; The modules in this file are included in the libraries, and may be replaced
; by any user-defined modules that define the PUBLIC symbol _program_start or
; a user defined start symbol.
; To override the cstartup defined in the library, simply add your modified
; version to the workbench project.
;
; The vector table is normally located at address 0.
; When debugging in RAM, it can be located in RAM, aligned to at least 2^6.
; The name "__vector_table" has special meaning for C-SPY:
; it is where the SP start value is found, and the NVIC vector
; table register (VTOR) is initialized to this address if != 0.
;
; Cortex-M version
;


        MODULE  ?cstartup

        ;; Forward declaration of sections.
        SECTION CSTACK:DATA:NOROOT(3)

        SECTION .intvec:CODE:NOROOT(2)

        EXTERN  __iar_program_start 
        EXTERN  SystemInit        
        PUBLIC  __vector_table
        PUBLIC  __vector_table_0x1c
        PUBLIC  __Vectors
        PUBLIC  __Vectors_End
        PUBLIC  __Vectors_Size

        DATA

__vector_table
        DCD     sfe(CSTACK)
        DCD     Reset_Handler
        DCD     NMI_Handler
        DCD     HardFault_Handler
        DCD     MemManage_Handler
        DCD     BusFault_Handler
        DCD     UsageFault_Handler
__vector_table_0x1c
        DCD     0xEFFFF39E                ; Reserved- vector sum
        DCD     0
        DCD     0
        DCD     0
        DCD     SVC_Handler
        DCD     DebugMon_Handler
        DCD     0
        DCD     PendSV_Handler
        DCD     SysTick_Handler

        ; External Interrupts
        DCD     WDT_IRQHandler            ; 16: Watchdog Timer
                DCD     TIMER0_IRQHandler         ; 17: Timer0
                DCD     TIMER1_IRQHandler         ; 18: Timer1
                DCD     TIMER2_IRQHandler         ; 19: Timer2
                DCD     TIMER3_IRQHandler         ; 20: Timer3
                DCD     UART0_IRQHandler          ; 21: UART0
                DCD     UART1_IRQHandler          ; 22: UART1
                DCD     UART2_IRQHandler          ; 23: UART2
                DCD     UART3_IRQHandler          ; 24: UART3
                DCD     PWM1_IRQHandler           ; 25: PWM1
                DCD     I2C0_IRQHandler           ; 26: I2C0
                DCD     I2C1_IRQHandler           ; 27: I2C1
                DCD     I2C2_IRQHandler           ; 28: I2C2
                DCD     0                         ; 29: reserved, not for SPIFI anymore
                DCD     SSP0_IRQHandler           ; 30: SSP0
                DCD     SSP1_IRQHandler           ; 31: SSP1
                DCD     PLL0_IRQHandler           ; 32: PLL0 Lock (Main PLL)
                DCD     RTC_IRQHandler            ; 33: Real Time Clock
                DCD     EINT0_IRQHandler          ; 34: External Interrupt 0
                DCD     EINT1_IRQHandler          ; 35: External Interrupt 1
                DCD     EINT2_IRQHandler          ; 36: External Interrupt 2
                DCD     EINT3_IRQHandler          ; 37: External Interrupt 3
                DCD     ADC_IRQHandler            ; 38: A/D Converter
                DCD     BOD_IRQHandler            ; 39: Brown-Out Detect
                DCD     USB_IRQHandler            ; 40: USB
                DCD     CAN_IRQHandler            ; 41: CAN
                DCD     DMA_IRQHandler            ; 42: General Purpose DMA
                DCD     I2S_IRQHandler            ; 43: I2S
                DCD     ENET_IRQHandler           ; 44: Ethernet
                DCD     MCI_IRQHandler            ; 45: SD/MMC card I/F
                DCD     MCPWM_IRQHandler          ; 46: Motor Control PWM
                DCD     QEI_IRQHandler            ; 47: Quadrature Encoder Interface
                DCD     PLL1_IRQHandler           ; 48: PLL1 Lock (USB PLL)
                DCD     USBActivity_IRQHandler    ; 49: USB Activity interrupt to wakeup
                DCD     CANActivity_IRQHandler    ; 50: CAN Activity interrupt to wakeup
                DCD     UART4_IRQHandler          ; 51: UART4
                DCD     SSP2_IRQHandler           ; 52: SSP2
                DCD     LCD_IRQHandler            ; 53: LCD
                DCD     GPIO_IRQHandler           ; 54: GPIO
                DCD     PWM0_IRQHandler           ; 55: PWM0
                DCD     EEPROM_IRQHandler         ; 56: EEPROM
__Vectors_End

__Vectors       EQU   __vector_table
__Vectors_Size 	EQU   __Vectors_End - __Vectors

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;;
;; Default interrupt handlers.
;;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

        THUMB
        PUBWEAK Reset_Handler
        SECTION .text:CODE:NOROOT:REORDER(2)
Reset_Handler
        LDR     R0, =SystemInit
        BLX     R0
        LDR     R0, =__iar_program_start
        BX      R0
  
        PUBWEAK NMI_Handler       
        PUBWEAK HardFault_Handler
        PUBWEAK MemManage_Handler 
        PUBWEAK BusFault_Handler
        PUBWEAK UsageFault_Handler
        PUBWEAK SVC_Handler
        PUBWEAK DebugMon_Handler
        PUBWEAK PendSV_Handler
        PUBWEAK SysTick_Handler
        PUBWEAK WDT_IRQHandler
        PUBWEAK TIMER0_IRQHandler
        PUBWEAK TIMER1_IRQHandler
        PUBWEAK TIMER2_IRQHandler
        PUBWEAK TIMER3_IRQHandler
        PUBWEAK UART0_IRQHandler
        PUBWEAK UART1_IRQHandler
        PUBWEAK UART2_IRQHandler
        PUBWEAK UART3_IRQHandler
        PUBWEAK PWM1_IRQHandler
        PUBWEAK I2C0_IRQHandler
        PUBWEAK I2C1_IRQHandler
        PUBWEAK I2C2_IRQHandler
;SPIFI_IRQHandler ;not used
        PUBWEAK SSP0_IRQHandler
        PUBWEAK SSP1_IRQHandler
        PUBWEAK PLL0_IRQHandler
        PUBWEAK RTC_IRQHandler
        PUBWEAK EINT0_IRQHandler
        PUBWEAK EINT1_IRQHandler
        PUBWEAK EINT2_IRQHandler
        PUBWEAK EINT3_IRQHandler
        PUBWEAK ADC_IRQHandler
        PUBWEAK BOD_IRQHandler
        PUBWEAK USB_IRQHandler
        PUBWEAK CAN_IRQHandler
        PUBWEAK DMA_IRQHandler
        PUBWEAK I2S_IRQHandler
        PUBWEAK ENET_IRQHandler
        PUBWEAK MCI_IRQHandler
        PUBWEAK MCPWM_IRQHandler
        PUBWEAK QEI_IRQHandler
        PUBWEAK PLL1_IRQHandler
        PUBWEAK USBActivity_IRQHandler
        PUBWEAK CANActivity_IRQHandler
        PUBWEAK UART4_IRQHandler
        PUBWEAK SSP2_IRQHandler
        PUBWEAK LCD_IRQHandler
        PUBWEAK GPIO_IRQHandler
        PUBWEAK PWM0_IRQHandler
        PUBWEAK EEPROM_IRQHandler
        
      SECTION .text:CODE:REORDER:NOROOT(1)
      THUMB
NMI_Handler       
HardFault_Handler
MemManage_Handler 
BusFault_Handler
UsageFault_Handler
SVC_Handler
DebugMon_Handler
PendSV_Handler
SysTick_Handler
WDT_IRQHandler
TIMER0_IRQHandler
TIMER1_IRQHandler
TIMER2_IRQHandler
TIMER3_IRQHandler
UART0_IRQHandler
UART1_IRQHandler
UART2_IRQHandler
UART3_IRQHandler
PWM1_IRQHandler
I2C0_IRQHandler
I2C1_IRQHandler
I2C2_IRQHandler
;SPIFI_IRQHandler ;not used
SSP0_IRQHandler
SSP1_IRQHandler
PLL0_IRQHandler
RTC_IRQHandler
EINT0_IRQHandler
EINT1_IRQHandler
EINT2_IRQHandler
EINT3_IRQHandler
ADC_IRQHandler
BOD_IRQHandler
USB_IRQHandler
CAN_IRQHandler
DMA_IRQHandler
I2S_IRQHandler
ENET_IRQHandler
MCI_IRQHandler
MCPWM_IRQHandler
QEI_IRQHandler
PLL1_IRQHandler
USBActivity_IRQHandler
CANActivity_IRQHandler
UART4_IRQHandler
SSP2_IRQHandler
LCD_IRQHandler
GPIO_IRQHandler
PWM0_IRQHandler
EEPROM_IRQHandler
Default_IRQHandler
        B Default_IRQHandler

        SECTION .crp:CODE:ROOT(2)
        DATA
/* Code Read Protection
NO_ISP  0x4E697370 -  Prevents sampling of pin PIO0_1 for entering ISP mode
CRP1    0x12345678 - Write to RAM command cannot access RAM below 0x10000300.
                   - Copy RAM to flash command can not write to Sector 0.
                   - Erase command can erase Sector 0 only when all sectors
                     are selected for erase.
                   - Compare command is disabled.
                   - Read Memory command is disabled.
CRP2    0x87654321 - Read Memory is disabled.
                   - Write to RAM is disabled.
                   - "Go" command is disabled.
                   - Copy RAM to flash is disabled.
                   - Compare is disabled.
CRP3    0x43218765 - Access to chip via the SWD pins is disabled. ISP entry
                     by pulling PIO0_1 LOW is disabled if a valid user code is
                     present in flash sector 0.
Caution: If CRP3 is selected, no future factory testing can be
performed on the device.
*/
	    DCD	0xFFFFFFFF

        END