mbed official
mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
targets/TARGET_NUVOTON/TARGET_M480/device/StdDriver/m480_clk.h
- Committer:
- AnnaBridge
- Date:
- 2019-02-20
- Revision:
- 189:f392fc9709a3
- Parent:
- 172:7d866c31b3c5
File content as of revision 189:f392fc9709a3:
/**************************************************************************//**
* @file CLK.h
* @version V1.0
* @brief M480 Series CLK Driver Header File
*
* @copyright (C) 2016 Nuvoton Technology Corp. All rights reserved.
******************************************************************************/
#ifndef __CLK_H__
#define __CLK_H__
#ifdef __cplusplus
extern "C"
{
#endif
/** @addtogroup M480_Device_Driver M480 Device Driver
@{
*/
/** @addtogroup M480_CLK_Driver CLK Driver
@{
*/
/** @addtogroup M480_CLK_EXPORTED_CONSTANTS CLK Exported Constants
@{
*/
#define FREQ_25MHZ 25000000UL /*!< 25 MHz \hideinitializer */
#define FREQ_50MHZ 50000000UL /*!< 50 MHz \hideinitializer */
#define FREQ_72MHZ 72000000UL /*!< 72 MHz \hideinitializer */
#define FREQ_80MHZ 80000000UL /*!< 80 MHz \hideinitializer */
#define FREQ_100MHZ 100000000UL /*!< 100 MHz \hideinitializer */
#define FREQ_125MHZ 125000000UL /*!< 125 MHz \hideinitializer */
#define FREQ_160MHZ 160000000UL /*!< 160 MHz \hideinitializer */
#define FREQ_192MHZ 192000000UL /*!< 192 MHz \hideinitializer */
#define FREQ_200MHZ 200000000UL /*!< 200 MHz \hideinitializer */
#define FREQ_250MHZ 250000000UL /*!< 250 MHz \hideinitializer */
#define FREQ_500MHZ 500000000UL /*!< 500 MHz \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* CLKSEL0 constant definitions. (Write-protection) */
/*---------------------------------------------------------------------------------------------------------*/
#define CLK_CLKSEL0_HCLKSEL_HXT (0x0UL << CLK_CLKSEL0_HCLKSEL_Pos) /*!< Select HCLK clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL0_HCLKSEL_LXT (0x1UL << CLK_CLKSEL0_HCLKSEL_Pos) /*!< Select HCLK clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL0_HCLKSEL_PLL (0x2UL << CLK_CLKSEL0_HCLKSEL_Pos) /*!< Select HCLK clock source from PLL \hideinitializer */
#define CLK_CLKSEL0_HCLKSEL_LIRC (0x3UL << CLK_CLKSEL0_HCLKSEL_Pos) /*!< Select HCLK clock source from low speed oscillator \hideinitializer */
#define CLK_CLKSEL0_HCLKSEL_HIRC (0x7UL << CLK_CLKSEL0_HCLKSEL_Pos) /*!< Select HCLK clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL0_STCLKSEL_HXT (0x0UL << CLK_CLKSEL0_STCLKSEL_Pos) /*!< Select SysTick clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL0_STCLKSEL_LXT (0x1UL << CLK_CLKSEL0_STCLKSEL_Pos) /*!< Select SysTick clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL0_STCLKSEL_HXT_DIV2 (0x2UL << CLK_CLKSEL0_STCLKSEL_Pos) /*!< Select SysTick clock source from HXT/2 \hideinitializer */
#define CLK_CLKSEL0_STCLKSEL_HCLK_DIV2 (0x3UL << CLK_CLKSEL0_STCLKSEL_Pos) /*!< Select SysTick clock source from HCLK/2 \hideinitializer */
#define CLK_CLKSEL0_STCLKSEL_HIRC_DIV2 (0x7UL << CLK_CLKSEL0_STCLKSEL_Pos) /*!< Select SysTick clock source from HIRC/2 \hideinitializer */
#define CLK_CLKSEL0_STCLKSEL_HCLK (0x01UL << SysTick_CTRL_CLKSOURCE_Pos) /*!< Select SysTick clock source from HCLK \hideinitializer */
#if(0)
#define CLK_CLKSEL0_PCLK0DIV1 (0x0UL << CLK_CLKSEL0_PCLK0SEL_Pos) /*!< Select PCLK0 clock source from HCLK \hideinitializer */
#define CLK_CLKSEL0_PCLK0DIV2 (0x1UL << CLK_CLKSEL0_PCLK0SEL_Pos) /*!< Select PCLK0 clock source from 1/2 HCLK \hideinitializer */
#define CLK_CLKSEL0_PCLK1DIV1 (0x0UL << CLK_CLKSEL0_PCLK1SEL_Pos) /*!< Select PCLK1 clock source from HCLK \hideinitializer */
#define CLK_CLKSEL0_PCLK1DIV2 (0x1UL << CLK_CLKSEL0_PCLK1SEL_Pos) /*!< Select PCLK1 clock source from 1/2 HCLK \hideinitializer */
#endif
#define CLK_CLKSEL0_SDH0SEL_HXT (0x0UL << CLK_CLKSEL0_SDH0SEL_Pos) /*!< Select SDH0 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL0_SDH0SEL_PLL (0x1UL << CLK_CLKSEL0_SDH0SEL_Pos) /*!< Select SDH0 clock source from PLL \hideinitializer */
#define CLK_CLKSEL0_SDH0SEL_HIRC (0x3UL << CLK_CLKSEL0_SDH0SEL_Pos) /*!< Select SDH0 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL0_SDH0SEL_HCLK (0x2UL << CLK_CLKSEL0_SDH0SEL_Pos) /*!< Select SDH0 clock source from HCLK \hideinitializer */
#define CLK_CLKSEL0_SDH1SEL_HXT (0x0UL << CLK_CLKSEL0_SDH1SEL_Pos) /*!< Select SDH1 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL0_SDH1SEL_PLL (0x1UL << CLK_CLKSEL0_SDH1SEL_Pos) /*!< Select SDH1 clock source from PLL \hideinitializer */
#define CLK_CLKSEL0_SDH1SEL_HIRC (0x3UL << CLK_CLKSEL0_SDH1SEL_Pos) /*!< Select SDH1 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL0_SDH1SEL_HCLK (0x2UL << CLK_CLKSEL0_SDH1SEL_Pos) /*!< Select SDH1 clock source from HCLK \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* CLKSEL1 constant definitions. */
/*---------------------------------------------------------------------------------------------------------*/
#define CLK_CLKSEL1_WDTSEL_LXT (0x1UL << CLK_CLKSEL1_WDTSEL_Pos) /*!< Select WDT clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL1_WDTSEL_LIRC (0x3UL << CLK_CLKSEL1_WDTSEL_Pos) /*!< Select WDT clock source from low speed oscillator \hideinitializer */
#define CLK_CLKSEL1_WDTSEL_HCLK_DIV2048 (0x2UL << CLK_CLKSEL1_WDTSEL_Pos) /*!< Select WDT clock source from HCLK/2048 \hideinitializer */
#define CLK_CLKSEL1_TMR0SEL_HXT (0x0UL << CLK_CLKSEL1_TMR0SEL_Pos) /*!< Select TMR0 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL1_TMR0SEL_LXT (0x1UL << CLK_CLKSEL1_TMR0SEL_Pos) /*!< Select TMR0 clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL1_TMR0SEL_LIRC (0x5UL << CLK_CLKSEL1_TMR0SEL_Pos) /*!< Select TMR0 clock source from low speed oscillator \hideinitializer */
#define CLK_CLKSEL1_TMR0SEL_HIRC (0x7UL << CLK_CLKSEL1_TMR0SEL_Pos) /*!< Select TMR0 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL1_TMR0SEL_PCLK0 (0x2UL << CLK_CLKSEL1_TMR0SEL_Pos) /*!< Select TMR0 clock source from PCLK0 \hideinitializer */
#define CLK_CLKSEL1_TMR0SEL_EXT (0x3UL << CLK_CLKSEL1_TMR0SEL_Pos) /*!< Select TMR0 clock source from external trigger \hideinitializer */
#define CLK_CLKSEL1_TMR1SEL_HXT (0x0UL << CLK_CLKSEL1_TMR1SEL_Pos) /*!< Select TMR1 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL1_TMR1SEL_LXT (0x1UL << CLK_CLKSEL1_TMR1SEL_Pos) /*!< Select TMR1 clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL1_TMR1SEL_LIRC (0x5UL << CLK_CLKSEL1_TMR1SEL_Pos) /*!< Select TMR1 clock source from low speed oscillator \hideinitializer */
#define CLK_CLKSEL1_TMR1SEL_HIRC (0x7UL << CLK_CLKSEL1_TMR1SEL_Pos) /*!< Select TMR1 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL1_TMR1SEL_PCLK0 (0x2UL << CLK_CLKSEL1_TMR1SEL_Pos) /*!< Select TMR1 clock source from PCLK0 \hideinitializer */
#define CLK_CLKSEL1_TMR1SEL_EXT (0x3UL << CLK_CLKSEL1_TMR1SEL_Pos) /*!< Select TMR1 clock source from external trigger \hideinitializer */
#define CLK_CLKSEL1_TMR2SEL_HXT (0x0UL << CLK_CLKSEL1_TMR2SEL_Pos) /*!< Select TMR2 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL1_TMR2SEL_LXT (0x1UL << CLK_CLKSEL1_TMR2SEL_Pos) /*!< Select TMR2 clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL1_TMR2SEL_LIRC (0x5UL << CLK_CLKSEL1_TMR2SEL_Pos) /*!< Select TMR2 clock source from low speed oscillator \hideinitializer */
#define CLK_CLKSEL1_TMR2SEL_HIRC (0x7UL << CLK_CLKSEL1_TMR2SEL_Pos) /*!< Select TMR2 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL1_TMR2SEL_PCLK1 (0x2UL << CLK_CLKSEL1_TMR2SEL_Pos) /*!< Select TMR2 clock source from PCLK1 \hideinitializer */
#define CLK_CLKSEL1_TMR2SEL_EXT (0x3UL << CLK_CLKSEL1_TMR2SEL_Pos) /*!< Select TMR2 clock source from external trigger \hideinitializer */
#define CLK_CLKSEL1_TMR3SEL_HXT (0x0UL << CLK_CLKSEL1_TMR3SEL_Pos) /*!< Select TMR3 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL1_TMR3SEL_LXT (0x1UL << CLK_CLKSEL1_TMR3SEL_Pos) /*!< Select TMR3 clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL1_TMR3SEL_LIRC (0x5UL << CLK_CLKSEL1_TMR3SEL_Pos) /*!< Select TMR3 clock source from low speed oscillator \hideinitializer */
#define CLK_CLKSEL1_TMR3SEL_HIRC (0x7UL << CLK_CLKSEL1_TMR3SEL_Pos) /*!< Select TMR3 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL1_TMR3SEL_PCLK1 (0x2UL << CLK_CLKSEL1_TMR3SEL_Pos) /*!< Select TMR3 clock source from PCLK1 \hideinitializer */
#define CLK_CLKSEL1_TMR3SEL_EXT (0x3UL << CLK_CLKSEL1_TMR3SEL_Pos) /*!< Select TMR3 clock source from external trigger \hideinitializer */
#define CLK_CLKSEL1_UART0SEL_HXT (0x0UL << CLK_CLKSEL1_UART0SEL_Pos) /*!< Select UART0 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL1_UART0SEL_LXT (0x2UL << CLK_CLKSEL1_UART0SEL_Pos) /*!< Select UART0 clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL1_UART0SEL_PLL (0x1UL << CLK_CLKSEL1_UART0SEL_Pos) /*!< Select UART0 clock source from PLL \hideinitializer */
#define CLK_CLKSEL1_UART0SEL_HIRC (0x3UL << CLK_CLKSEL1_UART0SEL_Pos) /*!< Select UART0 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL1_UART1SEL_HXT (0x0UL << CLK_CLKSEL1_UART1SEL_Pos) /*!< Select UART1 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL1_UART1SEL_LXT (0x2UL << CLK_CLKSEL1_UART1SEL_Pos) /*!< Select UART1 clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL1_UART1SEL_PLL (0x1UL << CLK_CLKSEL1_UART1SEL_Pos) /*!< Select UART1 clock source from PLL \hideinitializer */
#define CLK_CLKSEL1_UART1SEL_HIRC (0x3UL << CLK_CLKSEL1_UART1SEL_Pos) /*!< Select UART1 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL1_CLKOSEL_HXT (0x0UL << CLK_CLKSEL1_CLKOSEL_Pos) /*!< Select CLKO clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL1_CLKOSEL_LXT (0x1UL << CLK_CLKSEL1_CLKOSEL_Pos) /*!< Select CLKO clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL1_CLKOSEL_HIRC (0x3UL << CLK_CLKSEL1_CLKOSEL_Pos) /*!< Select CLKO clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL1_CLKOSEL_HCLK (0x2UL << CLK_CLKSEL1_CLKOSEL_Pos) /*!< Select CLKO clock source from HCLK \hideinitializer */
#define CLK_CLKSEL1_WWDTSEL_LIRC (0x3UL << CLK_CLKSEL1_WWDTSEL_Pos) /*!< Select WWDT clock source from low speed oscillator \hideinitializer */
#define CLK_CLKSEL1_WWDTSEL_HCLK_DIV2048 (0x2UL << CLK_CLKSEL1_WWDTSEL_Pos) /*!< Select WWDT clock source from HCLK/2048 \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* CLKSEL2 constant definitions. */
/*---------------------------------------------------------------------------------------------------------*/
#define CLK_CLKSEL2_SPI0SEL_HXT (0x0UL << CLK_CLKSEL2_SPI0SEL_Pos) /*!< Select SPI0 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL2_SPI0SEL_PLL (0x1UL << CLK_CLKSEL2_SPI0SEL_Pos) /*!< Select SPI0 clock source from PLL \hideinitializer */
#define CLK_CLKSEL2_SPI0SEL_HIRC (0x3UL << CLK_CLKSEL2_SPI0SEL_Pos) /*!< Select SPI0 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL2_SPI0SEL_PCLK0 (0x2UL << CLK_CLKSEL2_SPI0SEL_Pos) /*!< Select SPI0 clock source from PCLK0 \hideinitializer */
#define CLK_CLKSEL2_SPI1SEL_HXT (0x0UL << CLK_CLKSEL2_SPI1SEL_Pos) /*!< Select SPI1 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL2_SPI1SEL_PLL (0x1UL << CLK_CLKSEL2_SPI1SEL_Pos) /*!< Select SPI1 clock source from PLL \hideinitializer */
#define CLK_CLKSEL2_SPI1SEL_HIRC (0x3UL << CLK_CLKSEL2_SPI1SEL_Pos) /*!< Select SPI1 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL2_SPI1SEL_PCLK1 (0x2UL << CLK_CLKSEL2_SPI1SEL_Pos) /*!< Select SPI1 clock source from PCLK1 \hideinitializer */
#define CLK_CLKSEL2_SPI2SEL_HXT (0x0UL << CLK_CLKSEL2_SPI2SEL_Pos) /*!< Select SPI2 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL2_SPI2SEL_PLL (0x1UL << CLK_CLKSEL2_SPI2SEL_Pos) /*!< Select SPI2 clock source from PLL \hideinitializer */
#define CLK_CLKSEL2_SPI2SEL_HIRC (0x3UL << CLK_CLKSEL2_SPI2SEL_Pos) /*!< Select SPI2 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL2_SPI2SEL_PCLK0 (0x2UL << CLK_CLKSEL2_SPI2SEL_Pos) /*!< Select SPI2 clock source from PCLK0 \hideinitializer */
#define CLK_CLKSEL2_EPWM0SEL_PLL (0x0UL << CLK_CLKSEL2_EPWM0SEL_Pos) /*!< Select EPWM0 clock source from PLL \hideinitializer */
#define CLK_CLKSEL2_EPWM0SEL_PCLK0 (0x1UL << CLK_CLKSEL2_EPWM0SEL_Pos) /*!< Select EPWM0 clock source from PCLK0 \hideinitializer */
#define CLK_CLKSEL2_EPWM1SEL_PLL (0x0UL << CLK_CLKSEL2_EPWM1SEL_Pos) /*!< Select EPWM1 clock source from PLL \hideinitializer */
#define CLK_CLKSEL2_EPWM1SEL_PCLK1 (0x1UL << CLK_CLKSEL2_EPWM1SEL_Pos) /*!< Select EPWM1 clock source from PCLK1 \hideinitializer */
#define CLK_CLKSEL2_BPWM0SEL_PLL (0x0UL << CLK_CLKSEL2_BPWM0SEL_Pos) /*!< Select BPWM0 clock source from PLL \hideinitializer */
#define CLK_CLKSEL2_BPWM0SEL_PCLK0 (0x1UL << CLK_CLKSEL2_BPWM0SEL_Pos) /*!< Select BPWM0 clock source from PCLK0 \hideinitializer */
#define CLK_CLKSEL2_BPWM1SEL_PLL (0x0UL << CLK_CLKSEL2_BPWM1SEL_Pos) /*!< Select BPWM1 clock source from PLL \hideinitializer */
#define CLK_CLKSEL2_BPWM1SEL_PCLK1 (0x1UL << CLK_CLKSEL2_BPWM1SEL_Pos) /*!< Select BPWM1 clock source from PCLK1 \hideinitializer */
#define CLK_CLKSEL2_SPI3SEL_HXT (0x0UL << CLK_CLKSEL2_SPI3SEL_Pos) /*!< Select SPI3 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL2_SPI3SEL_PLL (0x1UL << CLK_CLKSEL2_SPI3SEL_Pos) /*!< Select SPI3 clock source from PLL \hideinitializer */
#define CLK_CLKSEL2_SPI3SEL_HIRC (0x3UL << CLK_CLKSEL2_SPI3SEL_Pos) /*!< Select SPI3 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL2_SPI3SEL_PCLK1 (0x2UL << CLK_CLKSEL2_SPI3SEL_Pos) /*!< Select SPI3 clock source from PCLK1 \hideinitializer */
#define CLK_CLKSEL2_SPI4SEL_HXT (0x0UL << CLK_CLKSEL2_SPI4SEL_Pos) /*!< Select SPI4 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL2_SPI4SEL_PLL (0x1UL << CLK_CLKSEL2_SPI4SEL_Pos) /*!< Select SPI4 clock source from PLL \hideinitializer */
#define CLK_CLKSEL2_SPI4SEL_HIRC (0x3UL << CLK_CLKSEL2_SPI4SEL_Pos) /*!< Select SPI4 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL2_SPI4SEL_PCLK0 (0x2UL << CLK_CLKSEL2_SPI4SEL_Pos) /*!< Select SPI4 clock source from PCLK0 \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* CLKSEL3 constant definitions. */
/*---------------------------------------------------------------------------------------------------------*/
#define CLK_CLKSEL3_SC0SEL_HXT (0x0UL << CLK_CLKSEL3_SC0SEL_Pos) /*!< Select SC0 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL3_SC0SEL_PLL (0x1UL << CLK_CLKSEL3_SC0SEL_Pos) /*!< Select SC0 clock source from PLL \hideinitializer */
#define CLK_CLKSEL3_SC0SEL_HIRC (0x3UL << CLK_CLKSEL3_SC0SEL_Pos) /*!< Select SC0 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL3_SC0SEL_PCLK0 (0x2UL << CLK_CLKSEL3_SC0SEL_Pos) /*!< Select SC0 clock source from PCLK0 \hideinitializer */
#define CLK_CLKSEL3_SC1SEL_HXT (0x0UL << CLK_CLKSEL3_SC1SEL_Pos) /*!< Select SC1 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL3_SC1SEL_PLL (0x1UL << CLK_CLKSEL3_SC1SEL_Pos) /*!< Select SC1 clock source from PLL \hideinitializer */
#define CLK_CLKSEL3_SC1SEL_HIRC (0x3UL << CLK_CLKSEL3_SC1SEL_Pos) /*!< Select SC1 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL3_SC1SEL_PCLK1 (0x2UL << CLK_CLKSEL3_SC1SEL_Pos) /*!< Select SC1 clock source from PCLK1 \hideinitializer */
#define CLK_CLKSEL3_SC2SEL_HXT (0x0UL << CLK_CLKSEL3_SC2SEL_Pos) /*!< Select SC2 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL3_SC2SEL_PLL (0x1UL << CLK_CLKSEL3_SC2SEL_Pos) /*!< Select SC2 clock source from PLL \hideinitializer */
#define CLK_CLKSEL3_SC2SEL_HIRC (0x3UL << CLK_CLKSEL3_SC2SEL_Pos) /*!< Select SC2 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL3_SC2SEL_PCLK0 (0x2UL << CLK_CLKSEL3_SC2SEL_Pos) /*!< Select SC2 clock source from PCLK0 \hideinitializer */
#define CLK_CLKSEL3_RTCSEL_LXT (0x0UL << CLK_CLKSEL3_RTCSEL_Pos) /*!< Select RTC clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL3_RTCSEL_LIRC (0x1UL << CLK_CLKSEL3_RTCSEL_Pos) /*!< Select RTC clock source from low speed oscillator \hideinitializer */
#define CLK_CLKSEL3_I2S0SEL_HXT (0x0UL << CLK_CLKSEL3_I2S0SEL_Pos) /*!< Select I2S0 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL3_I2S0SEL_PLL (0x1UL << CLK_CLKSEL3_I2S0SEL_Pos) /*!< Select I2S0 clock source from PLL \hideinitializer */
#define CLK_CLKSEL3_I2S0SEL_HIRC (0x3UL << CLK_CLKSEL3_I2S0SEL_Pos) /*!< Select I2S0 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL3_I2S0SEL_PCLK0 (0x2UL << CLK_CLKSEL3_I2S0SEL_Pos) /*!< Select I2S0 clock source from PCLK0 \hideinitializer */
#define CLK_CLKSEL3_UART2SEL_HXT (0x0UL << CLK_CLKSEL3_UART2SEL_Pos) /*!< Select UART2 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL3_UART2SEL_LXT (0x2UL << CLK_CLKSEL3_UART2SEL_Pos) /*!< Select UART2 clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL3_UART2SEL_PLL (0x1UL << CLK_CLKSEL3_UART2SEL_Pos) /*!< Select UART2 clock source from PLL \hideinitializer */
#define CLK_CLKSEL3_UART2SEL_HIRC (0x3UL << CLK_CLKSEL3_UART2SEL_Pos) /*!< Select UART2 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL3_UART3SEL_HXT (0x0UL << CLK_CLKSEL3_UART3SEL_Pos) /*!< Select UART3 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL3_UART3SEL_LXT (0x2UL << CLK_CLKSEL3_UART3SEL_Pos) /*!< Select UART3 clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL3_UART3SEL_PLL (0x1UL << CLK_CLKSEL3_UART3SEL_Pos) /*!< Select UART3 clock source from PLL \hideinitializer */
#define CLK_CLKSEL3_UART3SEL_HIRC (0x3UL << CLK_CLKSEL3_UART3SEL_Pos) /*!< Select UART3 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL3_UART4SEL_HXT (0x0UL << CLK_CLKSEL3_UART4SEL_Pos) /*!< Select UART4 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL3_UART4SEL_LXT (0x2UL << CLK_CLKSEL3_UART4SEL_Pos) /*!< Select UART4 clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL3_UART4SEL_PLL (0x1UL << CLK_CLKSEL3_UART4SEL_Pos) /*!< Select UART4 clock source from PLL \hideinitializer */
#define CLK_CLKSEL3_UART4SEL_HIRC (0x3UL << CLK_CLKSEL3_UART4SEL_Pos) /*!< Select UART4 clock source from high speed oscillator \hideinitializer */
#define CLK_CLKSEL3_UART5SEL_HXT (0x0UL << CLK_CLKSEL3_UART5SEL_Pos) /*!< Select UART5 clock source from high speed crystal \hideinitializer */
#define CLK_CLKSEL3_UART5SEL_LXT (0x2UL << CLK_CLKSEL3_UART5SEL_Pos) /*!< Select UART5 clock source from low speed crystal \hideinitializer */
#define CLK_CLKSEL3_UART5SEL_PLL (0x1UL << CLK_CLKSEL3_UART5SEL_Pos) /*!< Select UART5 clock source from PLL \hideinitializer */
#define CLK_CLKSEL3_UART5SEL_HIRC (0x3UL << CLK_CLKSEL3_UART5SEL_Pos) /*!< Select UART5 clock source from high speed oscillator \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* CLKDIV0 constant definitions. */
/*---------------------------------------------------------------------------------------------------------*/
#define CLK_CLKDIV0_HCLK(x) (((x) - 1UL) << CLK_CLKDIV0_HCLKDIV_Pos) /*!< CLKDIV0 Setting for HCLK clock divider. It could be 1~16 \hideinitializer */
#define CLK_CLKDIV0_USB(x) (((x) - 1UL) << CLK_CLKDIV0_USBDIV_Pos) /*!< CLKDIV0 Setting for USB clock divider. It could be 1~16 \hideinitializer */
#define CLK_CLKDIV0_SDH0(x) (((x) - 1UL) << CLK_CLKDIV0_SDH0DIV_Pos) /*!< CLKDIV0 Setting for SDH0 clock divider. It could be 1~256 \hideinitializer */
#define CLK_CLKDIV0_UART0(x) (((x) - 1UL) << CLK_CLKDIV0_UART0DIV_Pos) /*!< CLKDIV0 Setting for UART0 clock divider. It could be 1~16 \hideinitializer */
#define CLK_CLKDIV0_UART1(x) (((x) - 1UL) << CLK_CLKDIV0_UART1DIV_Pos) /*!< CLKDIV0 Setting for UART1 clock divider. It could be 1~16 \hideinitializer */
#define CLK_CLKDIV0_EADC(x) (((x) - 1UL) << CLK_CLKDIV0_EADCDIV_Pos) /*!< CLKDIV0 Setting for EADC clock divider. It could be 1~256 \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* CLKDIV1 constant definitions. */
/*---------------------------------------------------------------------------------------------------------*/
#define CLK_CLKDIV1_SC0(x) (((x) - 1UL) << CLK_CLKDIV1_SC0DIV_Pos) /*!< CLKDIV1 Setting for SC0 clock divider. It could be 1~256 \hideinitializer */
#define CLK_CLKDIV1_SC1(x) (((x) - 1UL) << CLK_CLKDIV1_SC1DIV_Pos) /*!< CLKDIV1 Setting for SC1 clock divider. It could be 1~256 \hideinitializer */
#define CLK_CLKDIV1_SC2(x) (((x) - 1UL) << CLK_CLKDIV1_SC2DIV_Pos) /*!< CLKDIV1 Setting for SC2 clock divider. It could be 1~256 \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* CLKDIV3 constant definitions. */
/*---------------------------------------------------------------------------------------------------------*/
#define CLK_CLKDIV3_EMAC(x) (((x) - 1UL) << CLK_CLKDIV3_EMACDIV_Pos) /*!< CLKDIV3 Setting for EMAC clock divider. It could be 1~256 \hideinitializer */
#define CLK_CLKDIV3_SDH1(x) (((x) - 1UL) << CLK_CLKDIV3_SDH1DIV_Pos) /*!< CLKDIV3 Setting for SDH1 clock divider. It could be 1~256 \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* CLKDIV4 constant definitions. */
/*---------------------------------------------------------------------------------------------------------*/
#define CLK_CLKDIV4_UART2(x) (((x) - 1UL) << CLK_CLKDIV4_UART2DIV_Pos) /*!< CLKDIV4 Setting for UART2 clock divider. It could be 1~16 \hideinitializer */
#define CLK_CLKDIV4_UART3(x) (((x) - 1UL) << CLK_CLKDIV4_UART3DIV_Pos) /*!< CLKDIV4 Setting for UART3 clock divider. It could be 1~16 \hideinitializer */
#define CLK_CLKDIV4_UART4(x) (((x) - 1UL) << CLK_CLKDIV4_UART4DIV_Pos) /*!< CLKDIV4 Setting for UART4 clock divider. It could be 1~16 \hideinitializer */
#define CLK_CLKDIV4_UART5(x) (((x) - 1UL) << CLK_CLKDIV4_UART5DIV_Pos) /*!< CLKDIV4 Setting for UART5 clock divider. It could be 1~16 \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* PCLKDIV constant definitions. */
/*---------------------------------------------------------------------------------------------------------*/
#if(1)
#define CLK_PCLKDIV_PCLK0DIV1 (0x0UL << CLK_PCLKDIV_APB0DIV_Pos) /*!< PCLKDIV Setting for PCLK0 = HCLK \hideinitializer */
#define CLK_PCLKDIV_PCLK0DIV2 (0x1UL << CLK_PCLKDIV_APB0DIV_Pos) /*!< PCLKDIV Setting for PCLK0 = 1/2 HCLK \hideinitializer */
#define CLK_PCLKDIV_PCLK0DIV4 (0x2UL << CLK_PCLKDIV_APB0DIV_Pos) /*!< PCLKDIV Setting for PCLK0 = 1/4 HCLK \hideinitializer */
#define CLK_PCLKDIV_PCLK0DIV8 (0x3UL << CLK_PCLKDIV_APB0DIV_Pos) /*!< PCLKDIV Setting for PCLK0 = 1/8 HCLK \hideinitializer */
#define CLK_PCLKDIV_PCLK0DIV16 (0x4UL << CLK_PCLKDIV_APB0DIV_Pos) /*!< PCLKDIV Setting for PCLK0 = 1/16 HCLK \hideinitializer */
#define CLK_PCLKDIV_PCLK1DIV1 (0x0UL << CLK_PCLKDIV_APB1DIV_Pos) /*!< PCLKDIV Setting for PCLK1 = HCLK \hideinitializer */
#define CLK_PCLKDIV_PCLK1DIV2 (0x1UL << CLK_PCLKDIV_APB1DIV_Pos) /*!< PCLKDIV Setting for PCLK1 = 1/2 HCLK \hideinitializer */
#define CLK_PCLKDIV_PCLK1DIV4 (0x2UL << CLK_PCLKDIV_APB1DIV_Pos) /*!< PCLKDIV Setting for PCLK1 = 1/4 HCLK \hideinitializer */
#define CLK_PCLKDIV_PCLK1DIV8 (0x3UL << CLK_PCLKDIV_APB1DIV_Pos) /*!< PCLKDIV Setting for PCLK1 = 1/8 HCLK \hideinitializer */
#define CLK_PCLKDIV_PCLK1DIV16 (0x4UL << CLK_PCLKDIV_APB1DIV_Pos) /*!< PCLKDIV Setting for PCLK1 = 1/16 HCLK \hideinitializer */
#endif
/*---------------------------------------------------------------------------------------------------------*/
/* PLLCTL constant definitions. PLL = FIN * 2 * NF / NR / NO */
/*---------------------------------------------------------------------------------------------------------*/
#define CLK_PLLCTL_PLLSRC_HXT 0x00000000UL /*!< For PLL clock source is HXT. 4MHz < FIN/NR < 8MHz \hideinitializer */
#define CLK_PLLCTL_PLLSRC_HIRC 0x00080000UL /*!< For PLL clock source is HIRC. 4MHz < FIN/NR < 8MHz \hideinitializer */
#define CLK_PLLCTL_NF(x) (((x)-2UL)) /*!< x must be constant and 2 <= x <= 513. 200MHz < FIN*2*NF/NR < 500MHz. \hideinitializer */
#define CLK_PLLCTL_NR(x) (((x)-1UL)<<9) /*!< x must be constant and 1 <= x <= 32. 4MHz < FIN/NR < 8MHz \hideinitializer */
#define CLK_PLLCTL_NO_1 0x0000UL /*!< For output divider is 1 \hideinitializer */
#define CLK_PLLCTL_NO_2 0x4000UL /*!< For output divider is 2 \hideinitializer */
#define CLK_PLLCTL_NO_4 0xC000UL /*!< For output divider is 4 \hideinitializer */
#define CLK_PLLCTL_72MHz_HXT (CLK_PLLCTL_PLLSRC_HXT | CLK_PLLCTL_NR(3UL) | CLK_PLLCTL_NF( 36UL) | CLK_PLLCTL_NO_4) /*!< Predefined PLLCTL setting for 72MHz PLL output with HXT(12MHz X'tal) \hideinitializer */
#define CLK_PLLCTL_80MHz_HXT (CLK_PLLCTL_PLLSRC_HXT | CLK_PLLCTL_NR(3UL) | CLK_PLLCTL_NF( 40UL) | CLK_PLLCTL_NO_4) /*!< Predefined PLLCTL setting for 80MHz PLL output with HXT(12MHz X'tal) \hideinitializer */
#define CLK_PLLCTL_144MHz_HXT (CLK_PLLCTL_PLLSRC_HXT | CLK_PLLCTL_NR(2UL) | CLK_PLLCTL_NF( 24UL) | CLK_PLLCTL_NO_2) /*!< Predefined PLLCTL setting for 144MHz PLL output with HXT(12MHz X'tal) \hideinitializer */
#define CLK_PLLCTL_160MHz_HXT (CLK_PLLCTL_PLLSRC_HXT | CLK_PLLCTL_NR(3UL) | CLK_PLLCTL_NF( 40UL) | CLK_PLLCTL_NO_2) /*!< Predefined PLLCTL setting for 160MHz PLL output with HXT(12MHz X'tal) \hideinitializer */
#define CLK_PLLCTL_192MHz_HXT (CLK_PLLCTL_PLLSRC_HXT | CLK_PLLCTL_NR(2UL) | CLK_PLLCTL_NF( 32UL) | CLK_PLLCTL_NO_2) /*!< Predefined PLLCTL setting for 192MHz PLL output with HXT(12MHz X'tal) \hideinitializer */
#define CLK_PLLCTL_72MHz_HIRC (CLK_PLLCTL_PLLSRC_HIRC | CLK_PLLCTL_NR(3UL) | CLK_PLLCTL_NF( 36UL) | CLK_PLLCTL_NO_4) /*!< Predefined PLLCTL setting for 72MHz PLL output with HIRC(12MHz IRC) \hideinitializer */
#define CLK_PLLCTL_80MHz_HIRC (CLK_PLLCTL_PLLSRC_HIRC | CLK_PLLCTL_NR(3UL) | CLK_PLLCTL_NF( 40UL) | CLK_PLLCTL_NO_4) /*!< Predefined PLLCTL setting for 80MHz PLL output with HIRC(12MHz IRC) \hideinitializer */
#define CLK_PLLCTL_144MHz_HIRC (CLK_PLLCTL_PLLSRC_HIRC | CLK_PLLCTL_NR(2UL) | CLK_PLLCTL_NF( 24UL) | CLK_PLLCTL_NO_2) /*!< Predefined PLLCTL setting for 144MHz PLL output with HIRC(12MHz IRC) \hideinitializer */
#define CLK_PLLCTL_160MHz_HIRC (CLK_PLLCTL_PLLSRC_HIRC | CLK_PLLCTL_NR(3UL) | CLK_PLLCTL_NF( 40UL) | CLK_PLLCTL_NO_2) /*!< Predefined PLLCTL setting for 160MHz PLL output with HIRC(12MHz IRC) \hideinitializer */
#define CLK_PLLCTL_192MHz_HIRC (CLK_PLLCTL_PLLSRC_HIRC | CLK_PLLCTL_NR(2UL) | CLK_PLLCTL_NF( 32UL) | CLK_PLLCTL_NO_2) /*!< Predefined PLLCTL setting for 192MHz PLL output with HIRC(12MHz IRC) \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* MODULE constant definitions. */
/*---------------------------------------------------------------------------------------------------------*/
/* APBCLK(31:30)|CLKSEL(29:28)|CLKSEL_Msk(27:25) |CLKSEL_Pos(24:20)|CLKDIV(19:18)|CLKDIV_Msk(17:10)|CLKDIV_Pos(9:5)|IP_EN_Pos(4:0) */
#define MODULE_APBCLK(x) (((x) >>30) & 0x3UL) /*!< Calculate AHBCLK/APBCLK offset on MODULE index, 0x0:AHBCLK, 0x1:APBCLK0, 0x2:APBCLK1 \hideinitializer */
#define MODULE_CLKSEL(x) (((x) >>28) & 0x3UL) /*!< Calculate CLKSEL offset on MODULE index, 0x0:CLKSEL0, 0x1:CLKSEL1, 0x2:CLKSEL2, 0x3:CLKSEL3 \hideinitializer */
#define MODULE_CLKSEL_Msk(x) (((x) >>25) & 0x7UL) /*!< Calculate CLKSEL mask offset on MODULE index \hideinitializer */
#define MODULE_CLKSEL_Pos(x) (((x) >>20) & 0x1fUL) /*!< Calculate CLKSEL position offset on MODULE index \hideinitializer */
#define MODULE_CLKDIV(x) (((x) >>18) & 0x3UL) /*!< Calculate APBCLK CLKDIV on MODULE index, 0x0:CLKDIV0, 0x1:CLKDIV1, 0x2:CLKDIV3, 0x3:CLKDIV4 \hideinitializer */
#define MODULE_CLKDIV_Msk(x) (((x) >>10) & 0xffUL) /*!< Calculate CLKDIV mask offset on MODULE index \hideinitializer */
#define MODULE_CLKDIV_Pos(x) (((x) >>5 ) & 0x1fUL) /*!< Calculate CLKDIV position offset on MODULE index \hideinitializer */
#define MODULE_IP_EN_Pos(x) (((x) >>0 ) & 0x1fUL) /*!< Calculate APBCLK offset on MODULE index \hideinitializer */
#define MODULE_NoMsk 0x0UL /*!< Not mask on MODULE index \hideinitializer */
#define NA MODULE_NoMsk /*!< Not Available \hideinitializer */
#define MODULE_APBCLK_ENC(x) (((x) & 0x03UL) << 30) /*!< MODULE index, 0x0:AHBCLK, 0x1:APBCLK0, 0x2:APBCLK1 \hideinitializer */
#define MODULE_CLKSEL_ENC(x) (((x) & 0x03UL) << 28) /*!< CLKSEL offset on MODULE index, 0x0:CLKSEL0, 0x1:CLKSEL1, 0x2:CLKSEL2, 0x3:CLKSEL3 \hideinitializer */
#define MODULE_CLKSEL_Msk_ENC(x) (((x) & 0x07UL) << 25) /*!< CLKSEL mask offset on MODULE index \hideinitializer */
#define MODULE_CLKSEL_Pos_ENC(x) (((x) & 0x1fUL) << 20) /*!< CLKSEL position offset on MODULE index \hideinitializer */
#define MODULE_CLKDIV_ENC(x) (((x) & 0x03UL) << 18) /*!< APBCLK CLKDIV on MODULE index, 0x0:CLKDIV0, 0x1:CLKDIV1, 0x2:CLKDIV3, 0x3:CLKDIV4 \hideinitializer */
#define MODULE_CLKDIV_Msk_ENC(x) (((x) & 0xffUL) << 10) /*!< CLKDIV mask offset on MODULE index \hideinitializer */
#define MODULE_CLKDIV_Pos_ENC(x) (((x) & 0x1fUL) << 5) /*!< CLKDIV position offset on MODULE index \hideinitializer */
#define MODULE_IP_EN_Pos_ENC(x) (((x) & 0x1fUL) << 0) /*!< AHBCLK/APBCLK offset on MODULE index \hideinitializer */
#define PDMA_MODULE ((0UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(1UL<<0)) /*!< PDMA Module \hideinitializer */
#define ISP_MODULE ((0UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(2UL<<0)) /*!< ISP Module \hideinitializer */
#define EBI_MODULE ((0UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(3UL<<0)) /*!< EBI Module \hideinitializer */
#define USBH_MODULE ((0UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(16UL<<0)) /*!< USBH Module \hideinitializer */
#define EMAC_MODULE ((0UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(2UL<<18) |(0xFFUL<<10) |(16UL<<5) |(5UL<<0)) /*!< EMAC Module \hideinitializer */
#define SDH0_MODULE ((0UL<<30)|(0UL<<28) |(0x3UL<<25) |(20UL<<20) |(0UL<<18) |(0xFFUL<<10) |(24UL<<5) |(6UL<<0)) /*!< SDH0 Module \hideinitializer */
#define CRC_MODULE ((0UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(7UL<<0)) /*!< CRC Module \hideinitializer */
#define HSUSBD_MODULE ((0UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(10UL<<0)) /*!< HSUSBD Module \hideinitializer */
#define CRPT_MODULE ((0UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(12UL<<0)) /*!< CRPT Module \hideinitializer */
#define SPIM_MODULE ((0UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(14UL<<0)) /*!< SPIM Module \hideinitializer */
#define SDH1_MODULE ((0UL<<30)|(0UL<<28) |(0x3UL<<25) |(22UL<<20) |(2UL<<18) |(0xFFUL<<10) |(24UL<<5) |(17UL<<0)) /*!< SDH1 Module \hideinitializer */
#define WDT_MODULE ((1UL<<30)|(1UL<<28) |(0x3UL<<25) |(0UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(0UL<<0)) /*!< WDT Module \hideinitializer */
#define RTC_MODULE ((1UL<<30)|(3UL<<28) |(0x1UL<<25) |(8UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(1UL<<0)) /*!< RTC Module \hideinitializer */
#define TMR0_MODULE ((1UL<<30)|(1UL<<28) |(0x7UL<<25) |(8UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(2UL<<0)) /*!< TMR0 Module \hideinitializer */
#define TMR1_MODULE ((1UL<<30)|(1UL<<28) |(0x7UL<<25) |(12UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(3UL<<0)) /*!< TMR1 Module \hideinitializer */
#define TMR2_MODULE ((1UL<<30)|(1UL<<28) |(0x7UL<<25) |(16UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(4UL<<0)) /*!< TMR2 Module \hideinitializer */
#define TMR3_MODULE ((1UL<<30)|(1UL<<28) |(0x7UL<<25) |(20UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(5UL<<0)) /*!< TMR3 Module \hideinitializer */
#define CLKO_MODULE ((1UL<<30)|(1UL<<28) |(0x3UL<<25) |(28UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(6UL<<0)) /*!< CLKO Module \hideinitializer */
#define WWDT_MODULE ((1UL<<30)|(1UL<<28) |(0x3UL<<25) |(30UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(0UL<<0)) /*!< WWDT Module \hideinitializer */
#define ACMP01_MODULE ((1UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(7UL<<0)) /*!< ACMP01 Module \hideinitializer */
#define I2C0_MODULE ((1UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(8UL<<0)) /*!< I2C0 Module \hideinitializer */
#define I2C1_MODULE ((1UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(9UL<<0)) /*!< I2C1 Module \hideinitializer */
#define I2C2_MODULE ((1UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(10UL<<0)) /*!< I2C2 Module \hideinitializer */
#define SPI0_MODULE ((1UL<<30)|(2UL<<28) |(0x3UL<<25) |(2UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(12UL<<0)) /*!< SPI0 Module \hideinitializer */
#define SPI1_MODULE ((1UL<<30)|(2UL<<28) |(0x3UL<<25) |(4UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(13UL<<0)) /*!< SPI1 Module \hideinitializer */
#define SPI2_MODULE ((1UL<<30)|(2UL<<28) |(0x3UL<<25) |(6UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(14UL<<0)) /*!< SPI2 Module \hideinitializer */
#define SPI3_MODULE ((1UL<<30)|(2UL<<28) |(0x3UL<<25) |(10UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(15UL<<0)) /*!< SPI3 Module \hideinitializer */
#define UART0_MODULE ((1UL<<30)|(1UL<<28) |(0x3UL<<25) |(24UL<<20) |(0UL<<18) |(0xFUL<<10) |(8UL<<5) |(16UL<<0)) /*!< UART0 Module \hideinitializer */
#define UART1_MODULE ((1UL<<30)|(1UL<<28) |(0x3UL<<25) |(26UL<<20) |(0UL<<18) |(0xFUL<<10) |(12UL<<5) |(17UL<<0)) /*!< UART1 Module \hideinitializer */
#define UART2_MODULE ((1UL<<30)|(3UL<<28) |(0x3UL<<25) |(24UL<<20) |(3UL<<18) |(0xFUL<<10) |(0UL<<5) |(18UL<<0)) /*!< UART2 Module \hideinitializer */
#define UART3_MODULE ((1UL<<30)|(3UL<<28) |(0x3UL<<25) |(26UL<<20) |(3UL<<18) |(0xFUL<<10) |(4UL<<5) |(19UL<<0)) /*!< UART3 Module \hideinitializer */
#define UART4_MODULE ((1UL<<30)|(3UL<<28) |(0x3UL<<25) |(28UL<<20) |(3UL<<18) |(0xFUL<<10) |(8UL<<5) |(20UL<<0)) /*!< UART4 Module \hideinitializer */
#define UART5_MODULE ((1UL<<30)|(3UL<<28) |(0x3UL<<25) |(30UL<<20) |(3UL<<18) |(0xFUL<<10) |(12UL<<5) |(21UL<<0)) /*!< UART5 Module \hideinitializer */
#define CAN0_MODULE ((1UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(24UL<<0)) /*!< CAN0 Module \hideinitializer */
#define CAN1_MODULE ((1UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(25UL<<0)) /*!< CAN1 Module \hideinitializer */
#define OTG_MODULE ((1UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(26UL<<0)) /*!< OTG Module \hideinitializer */
#define USBD_MODULE ((1UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(27UL<<0)) /*!< USBD Module \hideinitializer */
#define EADC_MODULE ((1UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(0UL<<18) |(0xFFUL<<10) |(16UL<<5) |(28UL<<0)) /*!< EADC Module \hideinitializer */
#define I2S0_MODULE ((1UL<<30)|(3UL<<28) |(0x3UL<<25) |(16UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(29UL<<0)) /*!< I2S0 Module \hideinitializer */
#define HSOTG_MODULE ((1UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(30UL<<0)) /*!< HSOTG Module \hideinitializer */
#define SC0_MODULE ((2UL<<30)|(3UL<<28) |(0x3UL<<25) |(0UL<<20) |(1UL<<18) |(0xFFUL<<10) |(0UL<<5) |(0UL<<0)) /*!< SC0 Module \hideinitializer */
#define SC1_MODULE ((2UL<<30)|(3UL<<28) |(0x3UL<<25) |(2UL<<20) |(1UL<<18) |(0xFFUL<<10) |(8UL<<5) |(1UL<<0)) /*!< SC1 Module \hideinitializer */
#define SC2_MODULE ((2UL<<30)|(3UL<<28) |(0x3UL<<25) |(4UL<<20) |(1UL<<18) |(0xFFUL<<10) |(16UL<<5) |(2UL<<0)) /*!< SC2 Module \hideinitializer */
#define SPI4_MODULE ((2UL<<30)|(2UL<<28) |(0x3UL<<25) |(12UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(6UL<<0)) /*!< SPI4 Module \hideinitializer */
#define USCI0_MODULE ((2UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(8UL<<0)) /*!< USCI0 Module \hideinitializer */
#define USCI1_MODULE ((2UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(9UL<<0)) /*!< USCI1 Module \hideinitializer */
#define DAC_MODULE ((2UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(12UL<<0)) /*!< DAC Module \hideinitializer */
#define EPWM0_MODULE ((2UL<<30)|(2UL<<28) |(0x1UL<<25) |(0UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(16UL<<0)) /*!< EPWM0 Module \hideinitializer */
#define EPWM1_MODULE ((2UL<<30)|(2UL<<28) |(0x1UL<<25) |(1UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(17UL<<0)) /*!< EPWM1 Module \hideinitializer */
#define BPWM0_MODULE ((2UL<<30)|(2UL<<28) |(0x1UL<<25) |(8UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(18UL<<0)) /*!< BPWM0 Module \hideinitializer */
#define BPWM1_MODULE ((2UL<<30)|(2UL<<28) |(0x1UL<<25) |(9UL<<20) |(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(19UL<<0)) /*!< BPWM1 Module \hideinitializer */
#define QEI0_MODULE ((2UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(22UL<<0)) /*!< QEI0 Module \hideinitializer */
#define QEI1_MODULE ((2UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(23UL<<0)) /*!< QEI1 Module \hideinitializer */
#define ECAP0_MODULE ((2UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(26UL<<0)) /*!< ECAP0 Module \hideinitializer */
#define ECAP1_MODULE ((2UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(27UL<<0)) /*!< ECAP1 Module \hideinitializer */
#define OPA_MODULE ((2UL<<30)|(MODULE_NoMsk<<28)|(MODULE_NoMsk<<25)|(MODULE_NoMsk<<20)|(MODULE_NoMsk<<18)|(MODULE_NoMsk<<10)|(MODULE_NoMsk<<5)|(30UL<<0)) /*!< OPA Module \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* PDMSEL constant definitions. */
/*---------------------------------------------------------------------------------------------------------*/
#define CLK_PMUCTL_PDMSEL_PD (0x0UL << CLK_PMUCTL_PDMSEL_Pos) /*!< Select power down mdoe is Power-down mode \hideinitializer */
#define CLK_PMUCTL_PDMSEL_LLPD (0x1UL << CLK_PMUCTL_PDMSEL_Pos) /*!< Select power down mdoe is Low leakage Power-down mode \hideinitializer */
#define CLK_PMUCTL_PDMSEL_FWPD (0x2UL << CLK_PMUCTL_PDMSEL_Pos) /*!< Select power down mdoe is Fast wake-up Power-down mode \hideinitializer */
#define CLK_PMUCTL_PDMSEL_SPD0 (0x4UL << CLK_PMUCTL_PDMSEL_Pos) /*!< Select power down mdoe is Standby Power-down mode 0 \hideinitializer */
#define CLK_PMUCTL_PDMSEL_SPD1 (0x5UL << CLK_PMUCTL_PDMSEL_Pos) /*!< Select power down mdoe is Standby Power-down mode 1 \hideinitializer */
#define CLK_PMUCTL_PDMSEL_DPD (0x6UL << CLK_PMUCTL_PDMSEL_Pos) /*!< Select power down mdoe is Deep Power-down mode \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* WKTMRIS constant definitions. */
/*---------------------------------------------------------------------------------------------------------*/
#define CLK_PMUCTL_WKTMRIS_128 (0x0UL << CLK_PMUCTL_WKTMRIS_Pos) /*!< Select Wake-up Timer Time-out Interval is 128 OSC10K clocks (12.8 ms) \hideinitializer */
#define CLK_PMUCTL_WKTMRIS_256 (0x1UL << CLK_PMUCTL_WKTMRIS_Pos) /*!< Select Wake-up Timer Time-out Interval is 256 OSC10K clocks (25.6 ms) \hideinitializer */
#define CLK_PMUCTL_WKTMRIS_512 (0x2UL << CLK_PMUCTL_WKTMRIS_Pos) /*!< Select Wake-up Timer Time-out Interval is 512 OSC10K clocks (51.2 ms) \hideinitializer */
#define CLK_PMUCTL_WKTMRIS_1024 (0x3UL << CLK_PMUCTL_WKTMRIS_Pos) /*!< Select Wake-up Timer Time-out Interval is 1024 OSC10K clocks (102.4ms) \hideinitializer */
#define CLK_PMUCTL_WKTMRIS_4096 (0x4UL << CLK_PMUCTL_WKTMRIS_Pos) /*!< Select Wake-up Timer Time-out Interval is 4096 OSC10K clocks (409.6ms) \hideinitializer */
#define CLK_PMUCTL_WKTMRIS_8192 (0x5UL << CLK_PMUCTL_WKTMRIS_Pos) /*!< Select Wake-up Timer Time-out Interval is 8192 OSC10K clocks (819.2ms) \hideinitializer */
#define CLK_PMUCTL_WKTMRIS_16384 (0x6UL << CLK_PMUCTL_WKTMRIS_Pos) /*!< Select Wake-up Timer Time-out Interval is 16384 OSC10K clocks (1638.4ms) \hideinitializer */
#define CLK_PMUCTL_WKTMRIS_65536 (0x7UL << CLK_PMUCTL_WKTMRIS_Pos) /*!< Select Wake-up Timer Time-out Interval is 65536 OSC10K clocks (6553.6ms) \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* SWKDBCLKSEL constant definitions. */
/*---------------------------------------------------------------------------------------------------------*/
#define CLK_SWKDBCTL_SWKDBCLKSEL_1 (0x0UL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 1 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_2 (0x1UL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 2 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_4 (0x2UL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 4 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_8 (0x3UL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 8 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_16 (0x4UL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 16 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_32 (0x5UL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 32 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_64 (0x6UL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 64 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_128 (0x7UL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 128 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_256 (0x8UL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 256 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_2x256 (0x9UL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 2x256 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_4x256 (0xaUL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 4x256 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_8x256 (0xbUL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 8x256 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_16x256 (0xcUL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 16x256 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_32x256 (0xdUL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 32x256 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_64x256 (0xeUL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 64x256 clocks \hideinitializer */
#define CLK_SWKDBCTL_SWKDBCLKSEL_128x256 (0xfUL << CLK_SWKDBCTL_SWKDBCLKSEL_Pos) /*!< Select Standby Power-down Pin De-bounce Sampling Cycle is 128x256 clocks \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* DPD Pin Rising/Falling Edge Wake-up Enable constant definitions. */
/*---------------------------------------------------------------------------------------------------------*/
#define CLK_DPDWKPIN_DISABLE (0x0UL << CLK_PMUCTL_WKPINEN_Pos) /*!< Disable Wake-up pin at Deep Power-down mode \hideinitializer */
#define CLK_DPDWKPIN_RISING (0x1UL << CLK_PMUCTL_WKPINEN_Pos) /*!< Enable Wake-up pin rising edge at Deep Power-down mode \hideinitializer */
#define CLK_DPDWKPIN_FALLING (0x2UL << CLK_PMUCTL_WKPINEN_Pos) /*!< Enable Wake-up pin falling edge at Deep Power-down mode \hideinitializer */
#define CLK_DPDWKPIN_BOTHEDGE (0x3UL << CLK_PMUCTL_WKPINEN_Pos) /*!< Enable Wake-up pin both edge at Deep Power-down mode \hideinitializer */
/*---------------------------------------------------------------------------------------------------------*/
/* SPD Pin Rising/Falling Edge Wake-up Enable constant definitions. */
/*---------------------------------------------------------------------------------------------------------*/
#define CLK_SPDWKPIN_ENABLE (0x1UL << 0) /*!< Enable Standby Power-down Pin Wake-up \hideinitializer */
#define CLK_SPDWKPIN_RISING (0x1UL << 1) /*!< Standby Power-down Wake-up on Standby Power-down Pin rising edge \hideinitializer */
#define CLK_SPDWKPIN_FALLING (0x1UL << 2) /*!< Standby Power-down Wake-up on Standby Power-down Pin falling edge \hideinitializer */
#define CLK_SPDWKPIN_DEBOUNCEEN (0x1UL << 8) /*!< Enable Standby power-down pin De-bounce function \hideinitializer */
#define CLK_SPDWKPIN_DEBOUNCEDIS (0x0UL << 8) /*!< Disable Standby power-down pin De-bounce function \hideinitializer */
#define CLK_DISABLE_WKTMR(void) (CLK->PMUCTL &= ~CLK_PMUCTL_WKTMREN_Msk) /*!< Disable Wake-up timer at Standby or Deep Power-down mode \hideinitializer */
#define CLK_ENABLE_WKTMR(void) (CLK->PMUCTL |= CLK_PMUCTL_WKTMREN_Msk) /*!< Enable Wake-up timer at Standby or Deep Power-down mode \hideinitializer */
#define CLK_DISABLE_DPDWKPIN(void) (CLK->PMUCTL &= ~CLK_PMUCTL_WKPINEN_Msk) /*!< Disable Wake-up pin at Deep Power-down mode \hideinitializer */
#define CLK_DISABLE_SPDACMP(void) (CLK->PMUCTL &= ~CLK_PMUCTL_ACMPSPWK_Msk) /*!< Disable ACMP wake-up at Standby Power-down mode \hideinitializer */
#define CLK_ENABLE_SPDACMP(void) (CLK->PMUCTL |= CLK_PMUCTL_ACMPSPWK_Msk) /*!< Enable ACMP wake-up at Standby Power-down mode \hideinitializer */
#define CLK_DISABLE_RTCWK(void) (CLK->PMUCTL &= ~CLK_PMUCTL_RTCWKEN_Msk) /*!< Disable RTC Wake-up at Standby or Deep Power-down mode \hideinitializer */
#define CLK_ENABLE_RTCWK(void) (CLK->PMUCTL |= CLK_PMUCTL_RTCWKEN_Msk) /*!< Enable RTC Wake-up at Standby or Deep Power-down mode \hideinitializer */
/*@}*/ /* end of group M480_CLK_EXPORTED_CONSTANTS */
/** @addtogroup M480_CLK_EXPORTED_FUNCTIONS CLK Exported Functions
@{
*/
/**
* @brief Set Wake-up Timer Time-out Interval
*
* @param[in] u32Interval The de-bounce sampling cycle selection. It could be
* - \ref CLK_PMUCTL_WKTMRIS_128
* - \ref CLK_PMUCTL_WKTMRIS_256
* - \ref CLK_PMUCTL_WKTMRIS_512
* - \ref CLK_PMUCTL_WKTMRIS_1024
* - \ref CLK_PMUCTL_WKTMRIS_4096
* - \ref CLK_PMUCTL_WKTMRIS_8192
* - \ref CLK_PMUCTL_WKTMRIS_16384
* - \ref CLK_PMUCTL_WKTMRIS_65536
*
* @return None
*
* @details This function set Wake-up Timer Time-out Interval.
*
* \hideinitializer
*/
#define CLK_SET_WKTMR_INTERVAL(u32Interval) (CLK->PMUCTL |= (u32Interval))
/**
* @brief Set De-bounce Sampling Cycle Time
*
* @param[in] u32CycleSel The de-bounce sampling cycle selection. It could be
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_1
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_2
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_4
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_8
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_16
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_32
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_64
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_128
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_256
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_2x256
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_4x256
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_8x256
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_16x256
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_32x256
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_64x256
* - \ref CLK_SWKDBCTL_SWKDBCLKSEL_128x256
*
* @return None
*
* @details This function set Set De-bounce Sampling Cycle Time.
*
* \hideinitializer
*/
#define CLK_SET_SPDDEBOUNCETIME(u32CycleSel) (CLK->SWKDBCTL = (u32CycleSel))
/* Declare these inline functions here to avoid MISRA C 2004 rule 8.1 error */
static __INLINE uint32_t CLK_GetPLLClockFreq(void);
static __INLINE void CLK_SysTickDelay(uint32_t us);
/**
* @brief Get PLL clock frequency
* @param None
* @return PLL frequency
* @details This function get PLL frequency. The frequency unit is Hz.
*/
__STATIC_INLINE uint32_t CLK_GetPLLClockFreq(void)
{
uint32_t u32PllFreq = 0UL, u32PllReg;
uint32_t u32FIN, u32NF, u32NR, u32NO;
uint8_t au8NoTbl[4] = {1U, 2U, 2U, 4U};
u32PllReg = CLK->PLLCTL;
if(u32PllReg & (CLK_PLLCTL_PD_Msk | CLK_PLLCTL_OE_Msk)) {
u32PllFreq = 0UL; /* PLL is in power down mode or fix low */
} else if((u32PllReg & CLK_PLLCTL_BP_Msk) == CLK_PLLCTL_BP_Msk) {
if((u32PllReg & CLK_PLLCTL_PLLSRC_HIRC) == CLK_PLLCTL_PLLSRC_HIRC) {
u32FIN = __HIRC; /* PLL source clock from HIRC */
} else {
u32FIN = __HXT; /* PLL source clock from HXT */
}
u32PllFreq = u32FIN;
} else {
if((u32PllReg & CLK_PLLCTL_PLLSRC_HIRC) == CLK_PLLCTL_PLLSRC_HIRC) {
u32FIN = __HIRC; /* PLL source clock from HIRC */
} else {
u32FIN = __HXT; /* PLL source clock from HXT */
}
/* PLL is output enabled in normal work mode */
u32NO = au8NoTbl[((u32PllReg & CLK_PLLCTL_OUTDIV_Msk) >> CLK_PLLCTL_OUTDIV_Pos)];
u32NF = ((u32PllReg & CLK_PLLCTL_FBDIV_Msk) >> CLK_PLLCTL_FBDIV_Pos) + 2UL;
u32NR = ((u32PllReg & CLK_PLLCTL_INDIV_Msk) >> CLK_PLLCTL_INDIV_Pos) + 1UL;
/* u32FIN is shifted 2 bits to avoid overflow */
u32PllFreq = (((u32FIN >> 2) * u32NF) / (u32NR * u32NO) << 2) * 2UL;
}
return u32PllFreq;
}
/**
* @brief This function execute delay function.
* @param us Delay time. The Max value is 2^24 / CPU Clock(MHz). Ex:
* 72MHz => 233016us, 50MHz => 335544us,
* 48MHz => 349525us, 28MHz => 699050us ...
* @return None
* @details Use the SysTick to generate the delay time and the unit is in us.
* The SysTick clock source is from HCLK, i.e the same as system core clock.
*/
__STATIC_INLINE void CLK_SysTickDelay(uint32_t us)
{
SysTick->LOAD = us * CyclesPerUs;
SysTick->VAL = 0x0UL;
SysTick->CTRL = SysTick_CTRL_CLKSOURCE_Msk | SysTick_CTRL_ENABLE_Msk;
/* Waiting for down-count to zero */
while((SysTick->CTRL & SysTick_CTRL_COUNTFLAG_Msk) == 0UL) {
}
/* Disable SysTick counter */
SysTick->CTRL = 0UL;
}
void CLK_DisableCKO(void);
void CLK_EnableCKO(uint32_t u32ClkSrc, uint32_t u32ClkDiv, uint32_t u32ClkDivBy1En);
void CLK_PowerDown(void);
void CLK_Idle(void);
uint32_t CLK_GetHXTFreq(void);
uint32_t CLK_GetLXTFreq(void);
uint32_t CLK_GetHCLKFreq(void);
uint32_t CLK_GetPCLK0Freq(void);
uint32_t CLK_GetPCLK1Freq(void);
uint32_t CLK_GetCPUFreq(void);
uint32_t CLK_SetCoreClock(uint32_t u32Hclk);
void CLK_SetHCLK(uint32_t u32ClkSrc, uint32_t u32ClkDiv);
void CLK_SetModuleClock(uint32_t u32ModuleIdx, uint32_t u32ClkSrc, uint32_t u32ClkDiv);
void CLK_SetSysTickClockSrc(uint32_t u32ClkSrc);
void CLK_EnableXtalRC(uint32_t u32ClkMask);
void CLK_DisableXtalRC(uint32_t u32ClkMask);
void CLK_EnableModuleClock(uint32_t u32ModuleIdx);
void CLK_DisableModuleClock(uint32_t u32ModuleIdx);
uint32_t CLK_EnablePLL(uint32_t u32PllClkSrc, uint32_t u32PllFreq);
void CLK_DisablePLL(void);
uint32_t CLK_WaitClockReady(uint32_t u32ClkMask);
void CLK_EnableSysTick(uint32_t u32ClkSrc, uint32_t u32Count);
void CLK_DisableSysTick(void);
void CLK_SetPowerDownMode(uint32_t u32PDMode);
void CLK_EnableDPDWKPin(uint32_t u32TriggerType);
uint32_t CLK_GetPMUWKSrc(void);
void CLK_EnableSPDWKPin(uint32_t u32Port, uint32_t u32Pin, uint32_t u32TriggerType, uint32_t u32DebounceEn);
void CLK_SetUSBModuleClock(uint32_t u32ModuleIdx, uint32_t u32ClkSrc, uint32_t u32ClkDiv);
/*@}*/ /* end of group M480_CLK_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group M480_CLK_Driver */
/*@}*/ /* end of group M480_Device_Driver */
#ifdef __cplusplus
}
#endif
#endif /* __CLK_H__ */
/*** (C) COPYRIGHT 2016 Nuvoton Technology Corp. ***/
