mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_062_BLE/PinNames.h
- Committer:
- AnnaBridge
- Date:
- 2019-02-20
- Revision:
- 189:f392fc9709a3
File content as of revision 189:f392fc9709a3:
/* * mbed Microcontroller Library * Copyright (c) 2017-2018 Future Electronics * Copyright (c) 2019 Cypress Semiconductor Corporation * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #include "PinNamesTypes.h" #include "PortNames.h" // PinName[15-0] = Port[15-8] + Pin[7-0] typedef enum { P0_0 = (Port0 << 8) + 0x00, P0_1 = (Port0 << 8) + 0x01, P0_2 = (Port0 << 8) + 0x02, P0_3 = (Port0 << 8) + 0x03, P0_4 = (Port0 << 8) + 0x04, P0_5 = (Port0 << 8) + 0x05, P0_6 = (Port0 << 8) + 0x06, P0_7 = (Port0 << 8) + 0x07, P1_0 = (Port1 << 8) + 0x00, P1_1 = (Port1 << 8) + 0x01, P1_2 = (Port1 << 8) + 0x02, P1_3 = (Port1 << 8) + 0x03, P1_4 = (Port1 << 8) + 0x04, P1_5 = (Port1 << 8) + 0x05, P1_6 = (Port1 << 8) + 0x06, P1_7 = (Port1 << 8) + 0x07, P2_0 = (Port2 << 8) + 0x00, P2_1 = (Port2 << 8) + 0x01, P2_2 = (Port2 << 8) + 0x02, P2_3 = (Port2 << 8) + 0x03, P2_4 = (Port2 << 8) + 0x04, P2_5 = (Port2 << 8) + 0x05, P2_6 = (Port2 << 8) + 0x06, P2_7 = (Port2 << 8) + 0x07, P3_0 = (Port3 << 8) + 0x00, P3_1 = (Port3 << 8) + 0x01, P3_2 = (Port3 << 8) + 0x02, P3_3 = (Port3 << 8) + 0x03, P3_4 = (Port3 << 8) + 0x04, P3_5 = (Port3 << 8) + 0x05, P3_6 = (Port3 << 8) + 0x06, P3_7 = (Port3 << 8) + 0x07, P4_0 = (Port4 << 8) + 0x00, P4_1 = (Port4 << 8) + 0x01, P4_2 = (Port4 << 8) + 0x02, P4_3 = (Port4 << 8) + 0x03, P4_4 = (Port4 << 8) + 0x04, P4_5 = (Port4 << 8) + 0x05, P4_6 = (Port4 << 8) + 0x06, P4_7 = (Port4 << 8) + 0x07, P5_0 = (Port5 << 8) + 0x00, P5_1 = (Port5 << 8) + 0x01, P5_2 = (Port5 << 8) + 0x02, P5_3 = (Port5 << 8) + 0x03, P5_4 = (Port5 << 8) + 0x04, P5_5 = (Port5 << 8) + 0x05, P5_6 = (Port5 << 8) + 0x06, P5_7 = (Port5 << 8) + 0x07, P6_0 = (Port6 << 8) + 0x00, P6_1 = (Port6 << 8) + 0x01, P6_2 = (Port6 << 8) + 0x02, P6_3 = (Port6 << 8) + 0x03, P6_4 = (Port6 << 8) + 0x04, P6_5 = (Port6 << 8) + 0x05, P6_6 = (Port6 << 8) + 0x06, P6_7 = (Port6 << 8) + 0x07, P7_0 = (Port7 << 8) + 0x00, P7_1 = (Port7 << 8) + 0x01, P7_2 = (Port7 << 8) + 0x02, P7_3 = (Port7 << 8) + 0x03, P7_4 = (Port7 << 8) + 0x04, P7_5 = (Port7 << 8) + 0x05, P7_6 = (Port7 << 8) + 0x06, P7_7 = (Port7 << 8) + 0x07, P8_0 = (Port8 << 8) + 0x00, P8_1 = (Port8 << 8) + 0x01, P8_2 = (Port8 << 8) + 0x02, P8_3 = (Port8 << 8) + 0x03, P8_4 = (Port8 << 8) + 0x04, P8_5 = (Port8 << 8) + 0x05, P8_6 = (Port8 << 8) + 0x06, P8_7 = (Port8 << 8) + 0x07, P9_0 = (Port9 << 8) + 0x00, P9_1 = (Port9 << 8) + 0x01, P9_2 = (Port9 << 8) + 0x02, P9_3 = (Port9 << 8) + 0x03, P9_4 = (Port9 << 8) + 0x04, P9_5 = (Port9 << 8) + 0x05, P9_6 = (Port9 << 8) + 0x06, P9_7 = (Port9 << 8) + 0x07, P10_0 = (Port10 << 8) + 0x00, P10_1 = (Port10 << 8) + 0x01, P10_2 = (Port10 << 8) + 0x02, P10_3 = (Port10 << 8) + 0x03, P10_4 = (Port10 << 8) + 0x04, P10_5 = (Port10 << 8) + 0x05, P10_6 = (Port10 << 8) + 0x06, P10_7 = (Port10 << 8) + 0x07, P11_0 = (Port11 << 8) + 0x00, P11_1 = (Port11 << 8) + 0x01, P11_2 = (Port11 << 8) + 0x02, P11_3 = (Port11 << 8) + 0x03, P11_4 = (Port11 << 8) + 0x04, P11_5 = (Port11 << 8) + 0x05, P11_6 = (Port11 << 8) + 0x06, P11_7 = (Port11 << 8) + 0x07, P12_0 = (Port12 << 8) + 0x00, P12_1 = (Port12 << 8) + 0x01, P12_2 = (Port12 << 8) + 0x02, P12_3 = (Port12 << 8) + 0x03, P12_4 = (Port12 << 8) + 0x04, P12_5 = (Port12 << 8) + 0x05, P12_6 = (Port12 << 8) + 0x06, P12_7 = (Port12 << 8) + 0x07, P13_0 = (Port13 << 8) + 0x00, P13_1 = (Port13 << 8) + 0x01, P13_2 = (Port13 << 8) + 0x02, P13_3 = (Port13 << 8) + 0x03, P13_4 = (Port13 << 8) + 0x04, P13_5 = (Port13 << 8) + 0x05, P13_6 = (Port13 << 8) + 0x06, P13_7 = (Port13 << 8) + 0x07, // Not connected NC = (int)0xFFFFFFFF, // Arduino connector namings A0 = P10_0, A1 = P10_1, A2 = P10_2, A3 = P10_3, A4 = P10_4, A5 = P10_5, D0 = P5_0, D1 = P5_1, D2 = P5_2, D3 = P5_3, D4 = P5_4, D5 = P5_5, D6 = P5_6, D7 = P0_2, D8 = P13_0, D9 = P13_1, D10 = P12_3, D11 = P12_0, D12 = P12_1, D13 = P12_2, D14 = P6_1, D15 = P6_0, // Generic signal names I2C_SCL = P6_0, I2C_SDA = P6_1, SPI_MOSI = P12_0, SPI_MISO = P12_1, SPI_CLK = P12_2, SPI_CS = P12_4, UART_RX = P5_0, UART_TX = P5_1, UART_RTS = P5_2, UART_CTS = P5_3, SWITCH2 = P0_4, LED1 = P0_3, LED2 = P1_1, LED3 = P11_1, LED4 = P1_5, LED5 = P13_7, LED_RED = LED1, LED_BLUE = LED3, LED_GREEN = LED2, USER_BUTTON = SWITCH2, BUTTON1 = USER_BUTTON, QSPI_CLK = P11_7, QSPI_IO_0 = P11_6, QSPI_IO_1 = P11_5, QSPI_IO_2 = P11_4, QSPI_IO_3 = P11_3, QSPI_SEL = P11_2, // Standardized interfaces names STDIO_UART_TX = UART_TX, STDIO_UART_RX = UART_RX, STDIO_UART_CTS = UART_CTS, STDIO_UART_RTS = UART_RTS, CY_STDIO_UART_RX = STDIO_UART_RX, CY_STDIO_UART_TX = STDIO_UART_TX, CY_STDIO_UART_CTS = STDIO_UART_CTS, CY_STDIO_UART_RTS = STDIO_UART_RTS, USBTX = UART_TX, USBRX = UART_RX, AOUT = P9_6 } PinName; // PinName[15-0] = Port[15-8] + Pin[4-0] static inline unsigned CY_PIN(PinName pin) { return pin & 0x07; } static inline unsigned CY_PORT(PinName pin) { return (pin >> 8) & 0xFF; } // Because MBED pin mapping API does not allow to map multiple instances of the PWM // to be mapped to the same pin, we create special pin names to force 32-bit PWM unit // usage instead of standard 16-bit PWM. #define PWM32(pin) CY_PIN_FORCE_PWM_32(pin) #endif