File content as of revision 189:f392fc9709a3:

/** \addtogroup hal */
/** @{*/
/* mbed Microcontroller Library
 * Copyright (c) 2018-2018 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
#ifndef MBED_MPU_API_H
#define MBED_MPU_API_H

#include "device.h"
#include <stdbool.h>

#ifdef __cplusplus
extern "C" {
#endif

#if DEVICE_MPU

/**
 * \defgroup hal_mpu MPU hal
 *
 * The MPU hal provides a simple MPU API to enhance device security by preventing
 * execution from ram.
 *
 * # Defined behavior
 * * The function ::mbed_mpu_init is safe to call repeatedly - Verified by ::mpu_init_test
 * * The function ::mbed_mpu_free disables MPU protection - Verified by ::mpu_free_test
 * * Execution from RAM results in a fault when execute never is enabled.
 *      This RAM includes heap, stack, data and zero init - Verified  by ::mpu_fault_test_data,
 *      ::mpu_fault_test_bss, ::mpu_fault_test_stack and ::mpu_fault_test_heap.
 * * Writing to ROM results in a fault when write never is enabled - Not verified
 *
 * # Undefined behavior
 * * Calling any function other than ::mbed_mpu_init before the initialization of the MPU.
 *
 * @see hal_mpu_tests
 *
 * @{
 */

/**
 * \defgroup hal_mpu_tests MPU hal tests
 * The MPU test validates proper implementation of the MPU hal.
 *
 * To run the MPU hal tests use the command:
 *
 *     mbed test -t <toolchain> -m <target> -n tests-mbed_hal-mpu*
 */


/**
 * Initialize the MPU
 *
 * Initialize or re-initialize the memory protection unit.
 * After initialization or re-initialization, ROM and RAM protection
 * are both enabled.
 */
void mbed_mpu_init(void);

/**
 * Enable or disable ROM MPU protection
 *
 * This function is used to mark all of ROM as read and execute only.
 * When enabled writes to ROM cause a fault.
 *
 * By default writes to ROM are disabled.
 *
 * @param enable true to disable writes to ROM, false otherwise
 */
void mbed_mpu_enable_rom_wn(bool enable);

/**
 * Enable or disable ram MPU protection
 *
 * This function is used to mark all of RAM as execute never.
 * When enabled code is only allowed to execute from flash.
 *
 * By default execution from RAM is disabled.
 *
 * @param enable true to disable execution from RAM, false otherwise
 */
void mbed_mpu_enable_ram_xn(bool enable);

/** Deinitialize the MPU
 *
 * Powerdown the MPU in preparation for powerdown, reset or jumping to another application.
 */
void mbed_mpu_free(void);

/**@}*/

#else

#define mbed_mpu_init()

#define mbed_mpu_enable_rom_wn(enable) (void)enable

#define mbed_mpu_enable_ram_xn(enable) (void)enable

#define mbed_mpu_free()

#endif

#ifdef __cplusplus
}
#endif

#endif

/** @}*/