File content as of revision 173:e131a1973e81:

/**************************************************************************//**
 * @file     usbd.c
 * @version  V1.00
 * @brief    M480 USBD driver source file
 *
 * @copyright (C) 2016 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/

#include <string.h>
#include "M480.h"

#ifdef __cplusplus
extern "C"
{
#endif

/** @addtogroup M480_Device_Driver M480 Device Driver
  @{
*/

/** @addtogroup M480_USBD_Driver USBD Driver
  @{
*/


/** @addtogroup M480_USBD_EXPORTED_FUNCTIONS USBD Exported Functions
  @{
*/

/* Global variables for Control Pipe */
uint8_t g_usbd_SetupPacket[8] = {0ul};        /*!< Setup packet buffer */
volatile uint8_t g_usbd_RemoteWakeupEn = 0ul; /*!< Remote wake up function enable flag */

/**
 * @cond HIDDEN_SYMBOLS
 */
static uint8_t *g_usbd_CtrlInPointer = 0;
static uint8_t *g_usbd_CtrlOutPointer = 0;
static volatile uint32_t g_usbd_CtrlInSize = 0ul;
static volatile uint32_t g_usbd_CtrlOutSize = 0ul;
static volatile uint32_t g_usbd_CtrlOutSizeLimit = 0ul;
static volatile uint32_t g_usbd_UsbAddr = 0ul;
static volatile uint32_t g_usbd_UsbConfig = 0ul;
static volatile uint32_t g_usbd_CtrlMaxPktSize = 8ul;
static volatile uint32_t g_usbd_UsbAltInterface = 0ul;
/**
 * @endcond
 */

const S_USBD_INFO_T *g_usbd_sInfo;                  /*!< A pointer for USB information structure */

VENDOR_REQ g_usbd_pfnVendorRequest       = NULL;    /*!< USB Vendor Request Functional Pointer */
CLASS_REQ g_usbd_pfnClassRequest         = NULL;    /*!< USB Class Request Functional Pointer */
SET_INTERFACE_REQ g_usbd_pfnSetInterface = NULL;    /*!< USB Set Interface Functional Pointer */
SET_CONFIG_CB g_usbd_pfnSetConfigCallback = NULL;   /*!< USB Set configuration callback function pointer */
uint32_t g_u32EpStallLock                = 0ul;       /*!< Bit map flag to lock specified EP when SET_FEATURE */

/**
  * @brief      This function makes USBD module to be ready to use
  *
  * @param[in]  param           The structure of USBD information.
  * @param[in]  pfnClassReq     USB Class request callback function.
  * @param[in]  pfnSetInterface USB Set Interface request callback function.
  *
  * @return     None
  *
  * @details    This function will enable USB controller, USB PHY transceiver and pull-up resistor of USB_D+ pin. USB PHY will drive SE0 to bus.
  */
void USBD_Open(const S_USBD_INFO_T *param, CLASS_REQ pfnClassReq, SET_INTERFACE_REQ pfnSetInterface)
{
    g_usbd_sInfo = param;
    g_usbd_pfnClassRequest = pfnClassReq;
    g_usbd_pfnSetInterface = pfnSetInterface;

    /* get EP0 maximum packet size */
    g_usbd_CtrlMaxPktSize = g_usbd_sInfo->gu8DevDesc[7];

    /* Initial USB engine */
    USBD->ATTR = 0x6D0ul;
    /* Force SE0 */
    USBD_SET_SE0();
}

/**
  * @brief    This function makes USB host to recognize the device
  *
  * @param    None
  *
  * @return   None
  *
  * @details  Enable WAKEUP, FLDET, USB and BUS interrupts. Disable software-disconnect function after 100ms delay with SysTick timer.
  */
void USBD_Start(void)
{
    /* Disable software-disconnect function */
    USBD_CLR_SE0();
    USBD->ATTR = 0x7D0ul;

    /* Clear USB-related interrupts before enable interrupt */
    USBD_CLR_INT_FLAG(USBD_INT_BUS | USBD_INT_USB | USBD_INT_FLDET | USBD_INT_WAKEUP);

    /* Enable USB-related interrupts. */
    USBD_ENABLE_INT(USBD_INT_BUS | USBD_INT_USB | USBD_INT_FLDET | USBD_INT_WAKEUP);
}

/**
  * @brief      Get the received SETUP packet
  *
  * @param[in]  buf A buffer pointer used to store 8-byte SETUP packet.
  *
  * @return     None
  *
  * @details    Store SETUP packet to a user-specified buffer.
  *
  */
void USBD_GetSetupPacket(uint8_t *buf)
{
    USBD_MemCopy(buf, g_usbd_SetupPacket, 8ul);
}

/**
  * @brief    Process SETUP packet
  *
  * @param    None
  *
  * @return   None
  *
  * @details  Parse SETUP packet and perform the corresponding action.
  *
  */
void USBD_ProcessSetupPacket(void)
{
    /* Get SETUP packet from USB buffer */
    USBD_MemCopy(g_usbd_SetupPacket, (uint8_t *)USBD_BUF_BASE, 8ul);

    /* Check the request type */
    switch(g_usbd_SetupPacket[0] & 0x60ul) {
    case REQ_STANDARD: {
        USBD_StandardRequest();
        break;
    }
    case REQ_CLASS: {
        if(g_usbd_pfnClassRequest != NULL) {
            g_usbd_pfnClassRequest();
        }
        break;
    }
    case REQ_VENDOR: {
        if(g_usbd_pfnVendorRequest != NULL) {
            g_usbd_pfnVendorRequest();
        }
        break;
    }
    default: {
        /* Setup error, stall the device */
        USBD_SET_EP_STALL(EP0);
        USBD_SET_EP_STALL(EP1);
        break;
    }
    }
}

/**
  * @brief    Process GetDescriptor request
  *
  * @param    None
  *
  * @return   None
  *
  * @details  Parse GetDescriptor request and perform the corresponding action.
  *
  */
void USBD_GetDescriptor(void)
{
    uint32_t u32Len;

    u32Len = 0ul;
    u32Len = g_usbd_SetupPacket[7];
    u32Len <<= 8ul;
    u32Len += g_usbd_SetupPacket[6];

    switch(g_usbd_SetupPacket[3]) {
    /* Get Device Descriptor */
    case DESC_DEVICE: {
        u32Len = USBD_Minimum(u32Len, (uint32_t)LEN_DEVICE);
        USBD_PrepareCtrlIn((uint8_t *)g_usbd_sInfo->gu8DevDesc, u32Len);

        break;
    }
    /* Get Configuration Descriptor */
    case DESC_CONFIG: {
        uint32_t u32TotalLen;

        u32TotalLen = g_usbd_sInfo->gu8ConfigDesc[3];
        u32TotalLen = g_usbd_sInfo->gu8ConfigDesc[2] + (u32TotalLen << 8);

        u32Len = USBD_Minimum(u32Len, u32TotalLen);
        USBD_PrepareCtrlIn((uint8_t *)g_usbd_sInfo->gu8ConfigDesc, u32Len);

        break;
    }

    /* Get BOS Descriptor */
    case DESC_BOS: {
        u32Len = USBD_Minimum(u32Len, LEN_BOS+LEN_BOSCAP);
        USBD_PrepareCtrlIn((uint8_t *)g_usbd_sInfo->gu8BosDesc, u32Len);
        break;
    }
    /* Get HID Descriptor */
    case DESC_HID: {
        /* CV3.0 HID Class Descriptor Test,
           Need to indicate index of the HID Descriptor within gu8ConfigDescriptor, specifically HID Composite device. */
        uint32_t u32ConfigDescOffset;   /* u32ConfigDescOffset is configuration descriptor offset (HID descriptor start index) */
        u32Len = USBD_Minimum(u32Len, LEN_HID);
        u32ConfigDescOffset = g_usbd_sInfo->gu32ConfigHidDescIdx[g_usbd_SetupPacket[4]];
        USBD_PrepareCtrlIn((uint8_t *)&g_usbd_sInfo->gu8ConfigDesc[u32ConfigDescOffset], u32Len);

        break;
    }
    /* Get Report Descriptor */
    case DESC_HID_RPT: {
        u32Len = USBD_Minimum(u32Len, g_usbd_sInfo->gu32HidReportSize[g_usbd_SetupPacket[4]]);
        USBD_PrepareCtrlIn((uint8_t *)g_usbd_sInfo->gu8HidReportDesc[g_usbd_SetupPacket[4]], u32Len);
        break;
    }
    /* Get String Descriptor */
    case DESC_STRING: {
        /* Get String Descriptor */
        if(g_usbd_SetupPacket[2] < 4ul) {
            u32Len = USBD_Minimum(u32Len, g_usbd_sInfo->gu8StringDesc[g_usbd_SetupPacket[2]][0]);
            USBD_PrepareCtrlIn((uint8_t *)g_usbd_sInfo->gu8StringDesc[g_usbd_SetupPacket[2]], u32Len);


            break;
        } else {
            /* Not support. Reply STALL. */
            USBD_SET_EP_STALL(EP0);
            USBD_SET_EP_STALL(EP1);
            break;
        }
    }
    default:
        /* Not support. Reply STALL.*/
        USBD_SET_EP_STALL(EP0);
        USBD_SET_EP_STALL(EP1);
        break;
    }
}

/**
  * @brief    Process standard request
  *
  * @param    None
  *
  * @return   None
  *
  * @details  Parse standard request and perform the corresponding action.
  *
  */
void USBD_StandardRequest(void)
{
    uint32_t addr;
    /* clear global variables for new request */
    g_usbd_CtrlInPointer = 0;
    g_usbd_CtrlInSize = 0ul;

    if((g_usbd_SetupPacket[0] & 0x80ul) == 0x80ul) {  /* request data transfer direction */
        /* Device to host */
        switch(g_usbd_SetupPacket[1]) {
        case USBD_GET_CONFIGURATION: {
            /* Return current configuration setting */
            /* Data stage */
            addr = USBD_BUF_BASE + USBD_GET_EP_BUF_ADDR(EP0);
            M8(addr) = (uint8_t)g_usbd_UsbConfig;
            USBD_SET_DATA1(EP0);
            USBD_SET_PAYLOAD_LEN(EP0, 1ul);
            /* Status stage */
            USBD_PrepareCtrlOut(0, 0ul);
            break;
        }
        case USBD_GET_DESCRIPTOR: {
            USBD_GetDescriptor();
            USBD_PrepareCtrlOut(0, 0ul); /* For status stage */
            break;
        }
        case USBD_GET_INTERFACE: {
            /* Return current interface setting */
            /* Data stage */
            addr = USBD_BUF_BASE + USBD_GET_EP_BUF_ADDR(EP0);
            M8(addr) = (uint8_t)g_usbd_UsbAltInterface;
            USBD_SET_DATA1(EP0);
            USBD_SET_PAYLOAD_LEN(EP0, 1ul);
            /* Status stage */
            USBD_PrepareCtrlOut(0, 0ul);
            break;
        }
        case USBD_GET_STATUS: {
            /* Device */
            if(g_usbd_SetupPacket[0] == 0x80ul) {
                uint8_t u8Tmp;

                u8Tmp = (uint8_t)0ul;
                if ((g_usbd_sInfo->gu8ConfigDesc[7] & 0x40ul) == 0x40ul) {
                    u8Tmp |= (uint8_t)1ul; /* Self-Powered/Bus-Powered.*/
                }
                if ((g_usbd_sInfo->gu8ConfigDesc[7] & 0x20ul) == 0x20ul) {
                    u8Tmp |= (uint8_t)(g_usbd_RemoteWakeupEn << 1ul); /* Remote wake up */
                }

                addr = USBD_BUF_BASE + USBD_GET_EP_BUF_ADDR(EP0);
                M8(addr) = u8Tmp;

            }
            /* Interface */
            else if(g_usbd_SetupPacket[0] == 0x81ul) {
                addr = USBD_BUF_BASE + USBD_GET_EP_BUF_ADDR(EP0);
                M8(addr) = (uint8_t)0ul;
            }
            /* Endpoint */
            else if(g_usbd_SetupPacket[0] == 0x82ul) {
                uint8_t ep = (uint8_t)(g_usbd_SetupPacket[4] & 0xFul);
                addr = USBD_BUF_BASE + USBD_GET_EP_BUF_ADDR(EP0);
                M8(addr) = (uint8_t)(USBD_GetStall(ep) ? 1ul : 0ul);
            }

            addr = USBD_BUF_BASE + USBD_GET_EP_BUF_ADDR(EP0) + 1ul;
            M8(addr) = (uint8_t)0ul;
            /* Data stage */
            USBD_SET_DATA1(EP0);
            USBD_SET_PAYLOAD_LEN(EP0, 2ul);
            /* Status stage */
            USBD_PrepareCtrlOut(0, 0ul);
            break;
        }
        default: {
            /* Setup error, stall the device */
            USBD_SET_EP_STALL(EP0);
            USBD_SET_EP_STALL(EP1);
            break;
        }
        }
    } else {
        /* Host to device */
        switch(g_usbd_SetupPacket[1]) {
        case USBD_CLEAR_FEATURE: {
            if(g_usbd_SetupPacket[2] == FEATURE_ENDPOINT_HALT) {
                uint32_t epNum, i;

                /* EP number stall is not allow to be clear in MSC class "Error Recovery Test".
                   a flag: g_u32EpStallLock is added to support it */
                epNum = (uint8_t)(g_usbd_SetupPacket[4] & 0xFul);
                for(i = 0ul; i < USBD_MAX_EP; i++) {
                    if(((USBD->EP[i].CFG & 0xFul) == epNum) && ((g_u32EpStallLock & (1ul << i)) == 0ul)) {
                        USBD->EP[i].CFGP &= ~USBD_CFGP_SSTALL_Msk;
                    }
                }
            } else if(g_usbd_SetupPacket[2] == FEATURE_DEVICE_REMOTE_WAKEUP) {
                g_usbd_RemoteWakeupEn = (uint8_t)0;
            }

            /* Status stage */
            USBD_SET_DATA1(EP0);
            USBD_SET_PAYLOAD_LEN(EP0, 0ul);
            break;
        }
        case USBD_SET_ADDRESS: {
            g_usbd_UsbAddr = g_usbd_SetupPacket[2];
            /* Status Stage */
            USBD_SET_DATA1(EP0);
            USBD_SET_PAYLOAD_LEN(EP0, 0ul);

            break;
        }
        case USBD_SET_CONFIGURATION: {
            g_usbd_UsbConfig = g_usbd_SetupPacket[2];

            if(g_usbd_pfnSetConfigCallback) {
                g_usbd_pfnSetConfigCallback();
            }

            /* Status stage */
            USBD_SET_DATA1(EP0);
            USBD_SET_PAYLOAD_LEN(EP0, 0ul);
            break;
        }
        case USBD_SET_FEATURE: {
            if( (g_usbd_SetupPacket[0] & 0xFul) == 0ul ) { /* 0: device */
                if((g_usbd_SetupPacket[2] == 3ul) && (g_usbd_SetupPacket[3] == 0ul)) { /* 3: HNP enable */
                    OTG->CTL |= (OTG_CTL_HNPREQEN_Msk | OTG_CTL_BUSREQ_Msk);
                }
            }
            if(g_usbd_SetupPacket[2] == FEATURE_ENDPOINT_HALT) {
                USBD_SetStall((uint8_t)(g_usbd_SetupPacket[4] & 0xFul));
            } else if(g_usbd_SetupPacket[2] == FEATURE_DEVICE_REMOTE_WAKEUP) {
                g_usbd_RemoteWakeupEn = (uint8_t)1ul;
            }

            /* Status stage */
            USBD_SET_DATA1(EP0);
            USBD_SET_PAYLOAD_LEN(EP0, 0ul);

            break;
        }
        case USBD_SET_INTERFACE: {
            g_usbd_UsbAltInterface = g_usbd_SetupPacket[2];
            if(g_usbd_pfnSetInterface != NULL) {
                g_usbd_pfnSetInterface(g_usbd_UsbAltInterface);
            }
            /* Status stage */
            USBD_SET_DATA1(EP0);
            USBD_SET_PAYLOAD_LEN(EP0, 0ul);
            break;
        }
        default: {
            /* Setup error, stall the device */
            USBD_SET_EP_STALL(EP0);
            USBD_SET_EP_STALL(EP1);
            break;
        }
        }
    }
}

/**
  * @brief      Prepare the first Control IN pipe
  *
  * @param[in]  pu8Buf  The pointer of data sent to USB host.
  * @param[in]  u32Size The IN transfer size.
  *
  * @return     None
  *
  * @details    Prepare data for Control IN transfer.
  *
  */
void USBD_PrepareCtrlIn(uint8_t pu8Buf[], uint32_t u32Size)
{
    uint32_t addr;
    if(u32Size > g_usbd_CtrlMaxPktSize) {
        /* Data size > MXPLD */
        g_usbd_CtrlInPointer = pu8Buf + g_usbd_CtrlMaxPktSize;
        g_usbd_CtrlInSize = u32Size - g_usbd_CtrlMaxPktSize;
        USBD_SET_DATA1(EP0);
        addr = USBD_BUF_BASE + USBD_GET_EP_BUF_ADDR(EP0);
        USBD_MemCopy((uint8_t *)addr, pu8Buf, g_usbd_CtrlMaxPktSize);
        USBD_SET_PAYLOAD_LEN(EP0, g_usbd_CtrlMaxPktSize);
    } else {
        /* Data size <= MXPLD */
        g_usbd_CtrlInPointer = 0;
        g_usbd_CtrlInSize = 0ul;
        USBD_SET_DATA1(EP0);
        addr = USBD_BUF_BASE + USBD_GET_EP_BUF_ADDR(EP0);
        USBD_MemCopy((uint8_t *)addr, pu8Buf, u32Size);
        USBD_SET_PAYLOAD_LEN(EP0, u32Size);
    }
}

/**
  * @brief    Repeat Control IN pipe
  *
  * @param    None
  *
  * @return   None
  *
  * @details  This function processes the remained data of Control IN transfer.
  *
  */
void USBD_CtrlIn(void)
{
    static uint8_t u8ZeroFlag = 0ul;
    uint32_t addr;

    if(g_usbd_CtrlInSize) {
        /* Process remained data */
        if(g_usbd_CtrlInSize > g_usbd_CtrlMaxPktSize) {
            /* Data size > MXPLD */
            addr = USBD_BUF_BASE + USBD_GET_EP_BUF_ADDR(EP0);
            USBD_MemCopy((uint8_t *)addr, (uint8_t *)g_usbd_CtrlInPointer, g_usbd_CtrlMaxPktSize);
            USBD_SET_PAYLOAD_LEN(EP0, g_usbd_CtrlMaxPktSize);
            g_usbd_CtrlInPointer += g_usbd_CtrlMaxPktSize;
            g_usbd_CtrlInSize -= g_usbd_CtrlMaxPktSize;
        } else {
            /* Data size <= MXPLD */
            addr = USBD_BUF_BASE + USBD_GET_EP_BUF_ADDR(EP0);
            USBD_MemCopy((uint8_t *)addr, (uint8_t *)g_usbd_CtrlInPointer, g_usbd_CtrlInSize);
            USBD_SET_PAYLOAD_LEN(EP0, g_usbd_CtrlInSize);
            if(g_usbd_CtrlInSize == g_usbd_CtrlMaxPktSize) {
                u8ZeroFlag = (uint8_t)1ul;
            }
            g_usbd_CtrlInPointer = 0;
            g_usbd_CtrlInSize = 0ul;
        }
    } else {
        /* In ACK for Set address */
        if((g_usbd_SetupPacket[0] == REQ_STANDARD) && (g_usbd_SetupPacket[1] == USBD_SET_ADDRESS)) {
            addr = USBD_GET_ADDR();
            if((addr != g_usbd_UsbAddr) && (addr == 0ul)) {
                USBD_SET_ADDR(g_usbd_UsbAddr);
            }
        }

        /* For the case of data size is integral times maximum packet size */
        if(u8ZeroFlag) {
            USBD_SET_PAYLOAD_LEN(EP0, 0ul);
            u8ZeroFlag = (uint8_t)0ul;
        }
    }
}

/**
  * @brief      Prepare the first Control OUT pipe
  *
  * @param[in]  pu8Buf  The pointer of data received from USB host.
  * @param[in]  u32Size The OUT transfer size.
  *
  * @return     None
  *
  * @details    This function is used to prepare the first Control OUT transfer.
  *
  */
void USBD_PrepareCtrlOut(uint8_t *pu8Buf, uint32_t u32Size)
{
    g_usbd_CtrlOutPointer = pu8Buf;
    g_usbd_CtrlOutSize = 0ul;
    g_usbd_CtrlOutSizeLimit = u32Size;
    USBD_SET_PAYLOAD_LEN(EP1, g_usbd_CtrlMaxPktSize);
}

/**
  * @brief    Repeat Control OUT pipe
  *
  * @param    None
  *
  * @return   None
  *
  * @details  This function processes the successive Control OUT transfer.
  *
  */
void USBD_CtrlOut(void)
{
    uint32_t u32Size;
    uint32_t addr;

    if(g_usbd_CtrlOutSize < g_usbd_CtrlOutSizeLimit) {
        u32Size = USBD_GET_PAYLOAD_LEN(EP1);
        addr = USBD_BUF_BASE + USBD_GET_EP_BUF_ADDR(EP1);
        USBD_MemCopy((uint8_t *)g_usbd_CtrlOutPointer, (uint8_t *)addr, u32Size);
        g_usbd_CtrlOutPointer += u32Size;
        g_usbd_CtrlOutSize += u32Size;

        if(g_usbd_CtrlOutSize < g_usbd_CtrlOutSizeLimit) {
            USBD_SET_PAYLOAD_LEN(EP1, g_usbd_CtrlMaxPktSize);
        }

    }
}

/**
  * @brief    Reset software flags
  *
  * @param    None
  *
  * @return   None
  *
  * @details  This function resets all variables for protocol and resets USB device address to 0.
  *
  */
void USBD_SwReset(void)
{
    uint32_t i;

    /* Reset all variables for protocol */
    g_usbd_CtrlInPointer = 0;
    g_usbd_CtrlInSize = 0ul;
    g_usbd_CtrlOutPointer = 0;
    g_usbd_CtrlOutSize = 0ul;
    g_usbd_CtrlOutSizeLimit = 0ul;
    g_u32EpStallLock = 0ul;
    memset(g_usbd_SetupPacket, 0, 8ul);

    /* Reset PID DATA0 */
    for(i=0ul; i<USBD_MAX_EP; i++) {
        USBD->EP[i].CFG &= ~USBD_CFG_DSQSYNC_Msk;
    }

    /* Reset USB device address */
    USBD_SET_ADDR(0ul);
}

/**
 * @brief       USBD Set Vendor Request
 *
 * @param[in]   pfnVendorReq    Vendor Request Callback Function
 *
 * @return      None
 *
 * @details     This function is used to set USBD vendor request callback function
 */
void USBD_SetVendorRequest(VENDOR_REQ pfnVendorReq)
{
    g_usbd_pfnVendorRequest = pfnVendorReq;
}

/**
 * @brief       The callback function which called when get SET CONFIGURATION request
 *
 * @param[in]   pfnSetConfigCallback    Callback function pointer for SET CONFIGURATION request
 *
 * @return      None
 *
 * @details     This function is used to set the callback function which will be called at SET CONFIGURATION request.
 */
void USBD_SetConfigCallback(SET_CONFIG_CB pfnSetConfigCallback)
{
    g_usbd_pfnSetConfigCallback = pfnSetConfigCallback;
}


/**
 * @brief       EP stall lock function to avoid stall clear by USB SET FEATURE request.
 *
 * @param[in]   u32EpBitmap    Use bitmap to select which endpoints will be locked
 *
 * @return      None
 *
 * @details     This function is used to lock relative endpoint to avoid stall clear by SET FEATURE request.
 *              If ep stall locked, user needs to reset USB device or re-configure device to clear it.
 */
void USBD_LockEpStall(uint32_t u32EpBitmap)
{
    g_u32EpStallLock = u32EpBitmap;
}


/*@}*/ /* end of group M480_USBD_EXPORTED_FUNCTIONS */

/*@}*/ /* end of group M480_USBD_Driver */

/*@}*/ /* end of group M480_Device_Driver */

#ifdef __cplusplus
}
#endif

/*** (C) COPYRIGHT 2016 Nuvoton Technology Corp. ***/