mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
targets/TARGET_STM/TARGET_STM32L0/TARGET_DISCO_L072CZ_LRWAN1/PinNames.h
- Committer:
- AnnaBridge
- Date:
- 2017-07-06
- Revision:
- 168:9672193075cf
- Parent:
- 165:e614a9f1c9e2
File content as of revision 168:9672193075cf:
/* mbed Microcontroller Library ******************************************************************************* * Copyright (c) 2017, STMicroelectronics * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ******************************************************************************* */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #include "PinNamesTypes.h" #ifdef __cplusplus extern "C" { #endif typedef enum { ALT0 = 0x100, ALT1 = 0x200, ALT2 = 0x300, ALT3 = 0x400 } ALTx; typedef enum { PA_0 = 0x00, PA_1 = 0x01, PA_2 = 0x02, PA_3 = 0x03, PA_4 = 0x04, PA_5 = 0x05, PA_6 = 0x06, PA_6_ALT0 = PA_6|ALT0, PA_7 = 0x07, PA_7_ALT0 = PA_7|ALT0, PA_8 = 0x08, PA_9 = 0x09, PA_10 = 0x0A, PA_11 = 0x0B, PA_12 = 0x0C, PA_13 = 0x0D, PA_14 = 0x0E, PA_14_ALT0 = PA_14|ALT0, PA_15 = 0x0F, PB_0 = 0x10, PB_1 = 0x11, PB_2 = 0x12, PB_3 = 0x13, PB_4 = 0x14, PB_4_ALT0 = PB_4|ALT0, PB_5 = 0x15, PB_5_ALT0 = PB_5|ALT0, PB_6 = 0x16, PB_7 = 0x17, PB_8 = 0x18, PB_9 = 0x19, PB_10 = 0x1A, PB_11 = 0x1B, PB_12 = 0x1C, PB_13 = 0x1D, PB_14 = 0x1E, PB_15 = 0x1F, PC_0 = 0x20, PC_1 = 0x21, PC_2 = 0x22, PC_13 = 0x2D, PH_0 = 0x70, PH_1 = 0x71, // ADC internal channels ADC_TEMP = 0xF0, ADC_VREF = 0xF1, ADC_VBAT = 0xF2, // Arduino connector namings A0 = PA_0, A1 = PA_0, // Alias A2 = PA_4, A3 = PA_4, // Alias A4 = PB_9, // SB11 must be closed A5 = PB_8, // SB12 must be closed D0 = PA_3, D1 = PA_2, D2 = PA_10, D3 = PB_13, D4 = PB_5, D5 = PB_7, D6 = PB_2, D7 = PA_8, D8 = PA_9, D9 = PB_12, D10 = PB_6, D11 = PB_15, D12 = PB_14, D13 = PB_13, // SB2 must be closed D14 = PB_9, D15 = PB_8, // Generic signals namings LED1 = PB_5, // Green LED2 = PA_5, // Red LED3 = PB_6, // Blue LED4 = PB_7, // Red USER_BUTTON = PB_2, SERIAL_TX = PA_2, SERIAL_RX = PA_3, USBTX = SERIAL_TX, USBRX = SERIAL_RX, I2C_SCL = D15, I2C_SDA = D14, SPI_MOSI = D11, SPI_MISO = D12, SPI_SCK = D13, SPI_CS = D10, PWM_OUT = D13, //USB pins USB_DM = PA_11, USB_DP = PA_12, USB_NOE = PA_13, // Not connected NC = (int)0xFFFFFFFF } PinName; #ifdef __cplusplus } #endif #endif