mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
targets/TARGET_NXP/TARGET_LPC11UXX/TARGET_APPNEARME_MICRONFCBOARD/PinNames.h
- Committer:
- AnnaBridge
- Date:
- 2018-02-16
- Revision:
- 181:57724642e740
- Parent:
- 149:156823d33999
File content as of revision 181:57724642e740:
/* mbed Microcontroller Library * Copyright (c) 2006-2015 ARM Limited * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #ifndef MBED_PINNAMES_H #define MBED_PINNAMES_H #include "cmsis.h" #ifdef __cplusplus extern "C" { #endif typedef enum { PIN_INPUT, PIN_OUTPUT } PinDirection; #define PORT_SHIFT 5 typedef enum { // LPC11U Pin Names P0_0 = 0, P0_1 = 1, P0_2 = 2, P0_3 = 3, P0_4 = 4, P0_5 = 5, P0_6 = 6, P0_7 = 7, P0_8 = 8, P0_9 = 9, P0_10 = 10, P0_11 = 11, P0_12 = 12, P0_13 = 13, P0_14 = 14, P0_15 = 15, P0_16 = 16, P0_17 = 17, P0_18 = 18, P0_19 = 19, P0_20 = 20, P0_21 = 21, P0_22 = 22, P0_23 = 23, P0_24 = 24, P0_25 = 25, P0_26 = 26, P0_27 = 27, P1_0 = 32, P1_1 = 33, P1_2 = 34, P1_3 = 35, P1_4 = 36, P1_5 = 37, P1_6 = 38, P1_7 = 39, P1_8 = 40, P1_9 = 41, P1_10 = 42, P1_11 = 43, P1_12 = 44, P1_13 = 45, P1_14 = 46, P1_15 = 47, P1_16 = 48, P1_17 = 49, P1_18 = 50, P1_19 = 51, P1_20 = 52, P1_21 = 53, P1_22 = 54, P1_23 = 55, P1_24 = 56, P1_25 = 57, P1_26 = 58, P1_27 = 59, P1_28 = 60, P1_29 = 61, P1_31 = 63, // MicroNFCBoard pin names M_RST = P0_0, M_BOOT = P0_1, M_RXD = P0_18, M_TXD = P0_19, M_SCL = P0_4, M_SDA = P0_5, M_D0 = P0_20, M_A0 = P0_16, M_A1 = P0_15, M_A2 = P0_14, M_A3 = P0_13, M_SCK = P0_10, M_MOSI = P0_9, M_MISO = P0_8, M_NCS = P0_2, M_IRQ = P0_7, // MicroNFCBoard pin numbers p4 = M_RST, p5 = M_BOOT, p6 = M_RXD, p7 = M_TXD, p8 = M_SCL, p9 = M_SDA, p10 = M_D0, p11 = M_IRQ, p12 = M_NCS, p13 = M_MISO, p14 = M_MOSI, p15 = M_SCK, p16 = M_A3, p17 = M_A2, p18 = M_A1, p19 = M_A0, // Other Pin Names LED1 = P0_11, LED2 = P0_12, // Alias to have correct blue lights of death pattern LED3 = LED2, LED4 = LED1, UART_TX = M_TXD, UART_RX = M_RXD, // Not connected NC = (int)0xFFFFFFFF, // Standard but not supported pins USBTX = NC, USBRX = NC, } PinName; typedef enum { CHANNEL0 = FLEX_INT0_IRQn, CHANNEL1 = FLEX_INT1_IRQn, CHANNEL2 = FLEX_INT2_IRQn, CHANNEL3 = FLEX_INT3_IRQn, CHANNEL4 = FLEX_INT4_IRQn, CHANNEL5 = FLEX_INT5_IRQn, CHANNEL6 = FLEX_INT6_IRQn, CHANNEL7 = FLEX_INT7_IRQn } Channel; typedef enum { PullUp = 2, PullDown = 1, PullNone = 0, Repeater = 3, OpenDrain = 4, PullDefault = PullDown } PinMode; #ifdef __cplusplus } #endif #endif