Diff: targets/TARGET_Realtek/TARGET_AMEBA/TARGET_MCU_RTL8195A/objects.h

Revision:

189:f392fc9709a3

Parent:

167:e84263d55307

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_Realtek/TARGET_AMEBA/TARGET_MCU_RTL8195A/objects.h	Wed Feb 20 22:31:08 2019 +0000
@@ -0,0 +1,214 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef CONFIG_GPIO_EN
+struct gpio_irq_s {
+    PinName pin;
+    uint32_t event;
+    HAL_GPIO_PIN hal_pin;
+    uint8_t hal_port_num;
+    uint8_t hal_pin_num;
+};
+
+typedef struct gpio_irq_s gpio_irq_t;
+
+struct gpio_s {
+    PinName pin;
+    PinMode mode;
+    PinDirection direction;
+    HAL_GPIO_PIN hal_pin;
+    uint8_t hal_port_num;
+    uint8_t hal_pin_num;
+};
+
+typedef struct gpio_s gpio_t;
+
+struct port_s {
+    PortName port;
+    uint32_t mask;
+    PinDirection direction;
+    uint8_t *pin_def;
+};
+#endif  // end of "#ifdef CONFIG_GPIO_EN"
+
+#ifdef CONFIG_UART_EN
+struct serial_s {
+	int index;
+    HAL_RUART_OP hal_uart_op;
+    HAL_RUART_ADAPTER hal_uart_adp;
+#ifdef CONFIG_GDMA_EN    
+    UART_DMA_CONFIG   uart_gdma_cfg;
+    HAL_GDMA_ADAPTER uart_gdma_adp_tx;
+    HAL_GDMA_ADAPTER uart_gdma_adp_rx;
+    UART_DMA_MULTIBLK gdma_multiblk_list_tx;
+    UART_DMA_MULTIBLK gdma_multiblk_list_rx;
+#endif    
+    uint32_t    tx_len;
+    uint32_t    rx_len;
+};
+#endif  // end of "#ifdef CONFIG_UART_EN"
+
+struct log_uart_s {
+    HAL_LOG_UART_ADAPTER log_hal_uart;
+};
+
+#ifdef CONFIG_SPI_COM_EN
+
+#endif
+
+#ifdef CONFIG_PWM_EN
+struct pwmout_s {
+    uint8_t pwm_idx;
+    uint8_t pin_sel;
+    uint32_t period;
+    uint32_t pulse;
+    HAL_PWM_ADAPTER pwm_hal_adp;    
+};
+#endif
+
+#ifdef CONFIG_I2C_EN
+struct i2c_s {
+    SAL_I2C_MNGT_ADPT   SalI2CMngtAdpt;        
+    SAL_I2C_HND_PRIV    SalI2CHndPriv;    
+    HAL_I2C_INIT_DAT    HalI2CInitData;
+    HAL_I2C_OP          HalI2COp;   
+    IRQ_HANDLE          I2CIrqHandleDat;    
+    HAL_GDMA_ADAPTER    HalI2CTxGdmaAdpt;   
+    HAL_GDMA_ADAPTER    HalI2CRxGdmaAdpt;     
+    HAL_GDMA_OP         HalI2CGdmaOp;
+    IRQ_HANDLE          I2CTxGdmaIrqHandleDat;    
+    IRQ_HANDLE          I2CRxGdmaIrqHandleDat;        
+    SAL_I2C_USER_CB     SalI2CUserCB;   
+    SAL_I2C_USERCB_ADPT SalI2CUserCBAdpt[SAL_USER_CB_NUM];    
+    SAL_I2C_DMA_USER_DEF    SalI2CDmaUserDef;
+};
+#endif
+
+
+struct flash_s
+{
+    SPIC_INIT_PARA SpicInitPara;
+    u32 Length;
+};
+
+
+#ifdef CONFIG_ADC_EN
+struct analogin_s {
+    SAL_ADC_MNGT_ADPT   SalADCMngtAdpt;        
+    SAL_ADC_HND_PRIV    SalADCHndPriv;    
+    HAL_ADC_INIT_DAT    HalADCInitData;
+    HAL_ADC_OP          HalADCOp;   
+    IRQ_HANDLE          ADCIrqHandleDat;    
+    HAL_GDMA_ADAPTER    HalADCGdmaAdpt;     
+    HAL_GDMA_OP         HalADCGdmaOp;
+    IRQ_HANDLE          ADCGdmaIrqHandleDat;        
+    SAL_ADC_USER_CB     SalADCUserCB;   
+    SAL_ADC_USERCB_ADPT SalADCUserCBAdpt[SAL_ADC_USER_CB_NUM];    
+};
+#endif
+
+#if 0
+struct i2c_s {
+    I2C_Type *i2c;
+};
+
+struct spi_s {
+    SPI_Type *spi;
+};
+
+#endif
+
+#ifdef CONFIG_NFC_EN
+struct nfctag_s {
+    NFC_ADAPTER NFCAdapter;
+    void *nfc_rd_cb;    // read callback function
+    void *rd_cb_arg;
+    void *nfc_wr_cb;    // write callback function
+    void *wr_cb_arg;
+    void *nfc_ev_cb;    // event callback function
+    void *ev_cb_arg;
+    void *nfc_cache_rd_cb;    // cache read callback function
+    void *cache_read_cb_arg;
+    unsigned int event_mask;
+    int pwr_status;
+};
+#endif
+
+#ifdef CONFIG_TIMER_EN
+struct gtimer_s {
+    TIMER_ADAPTER hal_gtimer_adp;
+    void *handler;
+    u32 hid;
+    u8 timer_id;
+    u8 is_periodcal;    
+};
+#endif
+
+#ifdef CONFIG_I2S_EN
+struct i2s_s {
+    HAL_I2S_ADAPTER I2SAdapter;
+	HAL_I2S_INIT_DAT InitDat;
+	u8 sampling_rate;
+	u8 channel_num;
+	u8 word_length;
+    u8 direction;
+};
+
+#endif
+
+#ifdef CONFIG_DAC_EN
+/** \file objects.h
+  *  \brief A Documented file.
+  *
+  *  A documented file.
+*/
+
+/** \struct dac_s objects.h "rtl8195a/objects.h"
+ *   \brief This is a dac_s structure.
+ *
+ *  For analogout APIs, a pointer to dac_s is used as an input paras.
+ *  A DAC initial data structure is the major element of dac_s.
+ */
+struct dac_s {
+   HAL_DAC_INIT_DAT DACpara;
+};
+#endif
+
+#ifdef CONFIG_ADC_EN //True random number generator uses ADC
+
+struct trng_s{
+	uint32_t pin;
+	struct analogin_s tradcng;
+	uint8_t inited;
+};
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif