mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
Diff: targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U34_421/PinNames.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U34_421/PinNames.h Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_LPC11U34_421/PinNames.h Fri Sep 02 15:07:44 2016 +0100 @@ -1,138 +1,138 @@ -/* mbed Microcontroller Library - * Copyright (c) 2006-2015 ARM Limited - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ -#ifndef MBED_PINNAMES_H -#define MBED_PINNAMES_H - -#include "cmsis.h" - -#ifdef __cplusplus -extern "C" { -#endif - -typedef enum { - PIN_INPUT, - PIN_OUTPUT -} PinDirection; - -#define PORT_SHIFT 5 - -typedef enum { - // LPC11U Pin Names - P0_0 = 0, - P0_1 = 1, - P0_2 = 2, - P0_3 = 3, - P0_4 = 4, - P0_5 = 5, - P0_6 = 6, - P0_7 = 7, - P0_8 = 8, - P0_9 = 9, - P0_10 = 10, - P0_11 = 11, - P0_12 = 12, - P0_13 = 13, - P0_14 = 14, - P0_15 = 15, - P0_16 = 16, - P0_17 = 17, - P0_18 = 18, - P0_19 = 19, - P0_20 = 20, - P0_21 = 21, - P0_22 = 22, - P0_23 = 23, - P0_24 = 24, - P0_25 = 25, - P0_26 = 26, - P0_27 = 27, - - P1_0 = 32, - P1_1 = 33, - P1_2 = 34, - P1_3 = 35, - P1_4 = 36, - P1_5 = 37, - P1_6 = 38, - P1_7 = 39, - P1_8 = 40, - P1_9 = 41, - P1_10 = 42, - P1_11 = 43, - P1_12 = 44, - P1_13 = 45, - P1_14 = 46, - P1_15 = 47, - P1_16 = 48, - P1_17 = 49, - P1_18 = 50, - P1_19 = 51, - P1_20 = 52, - P1_21 = 53, - P1_22 = 54, - P1_23 = 55, - P1_24 = 56, - P1_25 = 57, - P1_26 = 58, - P1_27 = 59, - P1_28 = 60, - P1_29 = 61, - - P1_31 = 63, - - // Other mbed Pin Names - LED1 = P0_7, - LED2 = P0_7, - LED3 = P0_7, - LED4 = P0_7, - - UART_TX = P0_19, - UART_RX = P0_18, - - // Not connected - NC = (int)0xFFFFFFFF, - - // Standard but not supported pins - USBTX = NC, - USBRX = NC, - -} PinName; - -typedef enum { - CHANNEL0 = FLEX_INT0_IRQn, - CHANNEL1 = FLEX_INT1_IRQn, - CHANNEL2 = FLEX_INT2_IRQn, - CHANNEL3 = FLEX_INT3_IRQn, - CHANNEL4 = FLEX_INT4_IRQn, - CHANNEL5 = FLEX_INT5_IRQn, - CHANNEL6 = FLEX_INT6_IRQn, - CHANNEL7 = FLEX_INT7_IRQn -} Channel; - -typedef enum { - PullUp = 2, - PullDown = 1, - PullNone = 0, - Repeater = 3, - OpenDrain = 4, - PullDefault = PullDown -} PinMode; - -#ifdef __cplusplus -} -#endif - -#endif +/* mbed Microcontroller Library + * Copyright (c) 2006-2015 ARM Limited + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MBED_PINNAMES_H +#define MBED_PINNAMES_H + +#include "cmsis.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + PIN_INPUT, + PIN_OUTPUT +} PinDirection; + +#define PORT_SHIFT 5 + +typedef enum { + // LPC11U Pin Names + P0_0 = 0, + P0_1 = 1, + P0_2 = 2, + P0_3 = 3, + P0_4 = 4, + P0_5 = 5, + P0_6 = 6, + P0_7 = 7, + P0_8 = 8, + P0_9 = 9, + P0_10 = 10, + P0_11 = 11, + P0_12 = 12, + P0_13 = 13, + P0_14 = 14, + P0_15 = 15, + P0_16 = 16, + P0_17 = 17, + P0_18 = 18, + P0_19 = 19, + P0_20 = 20, + P0_21 = 21, + P0_22 = 22, + P0_23 = 23, + P0_24 = 24, + P0_25 = 25, + P0_26 = 26, + P0_27 = 27, + + P1_0 = 32, + P1_1 = 33, + P1_2 = 34, + P1_3 = 35, + P1_4 = 36, + P1_5 = 37, + P1_6 = 38, + P1_7 = 39, + P1_8 = 40, + P1_9 = 41, + P1_10 = 42, + P1_11 = 43, + P1_12 = 44, + P1_13 = 45, + P1_14 = 46, + P1_15 = 47, + P1_16 = 48, + P1_17 = 49, + P1_18 = 50, + P1_19 = 51, + P1_20 = 52, + P1_21 = 53, + P1_22 = 54, + P1_23 = 55, + P1_24 = 56, + P1_25 = 57, + P1_26 = 58, + P1_27 = 59, + P1_28 = 60, + P1_29 = 61, + + P1_31 = 63, + + // Other mbed Pin Names + LED1 = P0_7, + LED2 = P0_7, + LED3 = P0_7, + LED4 = P0_7, + + UART_TX = P0_19, + UART_RX = P0_18, + + // Not connected + NC = (int)0xFFFFFFFF, + + // Standard but not supported pins + USBTX = NC, + USBRX = NC, + +} PinName; + +typedef enum { + CHANNEL0 = FLEX_INT0_IRQn, + CHANNEL1 = FLEX_INT1_IRQn, + CHANNEL2 = FLEX_INT2_IRQn, + CHANNEL3 = FLEX_INT3_IRQn, + CHANNEL4 = FLEX_INT4_IRQn, + CHANNEL5 = FLEX_INT5_IRQn, + CHANNEL6 = FLEX_INT6_IRQn, + CHANNEL7 = FLEX_INT7_IRQn +} Channel; + +typedef enum { + PullUp = 2, + PullDown = 1, + PullNone = 0, + Repeater = 3, + OpenDrain = 4, + PullDefault = PullDown +} PinMode; + +#ifdef __cplusplus +} +#endif + +#endif