Diff: targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_ARCH_GPRS/PeripheralNames.h

Revision:

144:ef7eb2e8f9f7

Parent:

0:9b334a45a8ff

--- a/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_ARCH_GPRS/PeripheralNames.h	Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/hal/TARGET_NXP/TARGET_LPC11UXX/TARGET_ARCH_GPRS/PeripheralNames.h	Fri Sep 02 15:07:44 2016 +0100
@@ -1,87 +1,87 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2006-2013 ARM Limited
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PERIPHERALNAMES_H
-#define MBED_PERIPHERALNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-typedef enum {
-    UART_0 = (int)LPC_USART_BASE
-} UARTName;
-
-typedef enum {
-    I2C_0 = (int)LPC_I2C_BASE
-} I2CName;
-
-typedef enum {
-    ADC0_0 = 0,
-    ADC0_1,
-    ADC0_2,
-    ADC0_3,
-    ADC0_4,
-    ADC0_5,
-    ADC0_6,
-    ADC0_7
-} ADCName;
-
-typedef enum {
-    SPI_0 = (int)LPC_SSP0_BASE,
-    SPI_1 = (int)LPC_SSP1_BASE
-} SPIName;
-
-typedef enum {
-    PWM_1 = 0,
-    PWM_2,
-    PWM_3,
-    PWM_4,
-    PWM_5,
-    PWM_6,
-    PWM_7,
-    PWM_8,
-    PWM_9,
-    PWM_10,
-    PWM_11
-} PWMName;
-
-#define STDIO_UART_TX     USBTX
-#define STDIO_UART_RX     USBRX
-#define STDIO_UART        UART_0
-
-// Default peripherals
-#define MBED_SPI0         p5, p6, p7, p8
-#define MBED_SPI1         p11, p12, p13, p14
-
-#define MBED_UART0        p9, p10
-#define MBED_UARTUSB      USBTX, USBRX
-
-#define MBED_I2C0         p28, p27
-
-#define MBED_ANALOGIN0    p15
-#define MBED_ANALOGIN1    p16
-#define MBED_ANALOGIN2    p17
-#define MBED_ANALOGIN3    p18
-#define MBED_ANALOGIN4    p19
-#define MBED_ANALOGIN5    p20
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_PERIPHERALNAMES_H
+#define MBED_PERIPHERALNAMES_H
+
+#include "cmsis.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    UART_0 = (int)LPC_USART_BASE
+} UARTName;
+
+typedef enum {
+    I2C_0 = (int)LPC_I2C_BASE
+} I2CName;
+
+typedef enum {
+    ADC0_0 = 0,
+    ADC0_1,
+    ADC0_2,
+    ADC0_3,
+    ADC0_4,
+    ADC0_5,
+    ADC0_6,
+    ADC0_7
+} ADCName;
+
+typedef enum {
+    SPI_0 = (int)LPC_SSP0_BASE,
+    SPI_1 = (int)LPC_SSP1_BASE
+} SPIName;
+
+typedef enum {
+    PWM_1 = 0,
+    PWM_2,
+    PWM_3,
+    PWM_4,
+    PWM_5,
+    PWM_6,
+    PWM_7,
+    PWM_8,
+    PWM_9,
+    PWM_10,
+    PWM_11
+} PWMName;
+
+#define STDIO_UART_TX     USBTX
+#define STDIO_UART_RX     USBRX
+#define STDIO_UART        UART_0
+
+// Default peripherals
+#define MBED_SPI0         p5, p6, p7, p8
+#define MBED_SPI1         p11, p12, p13, p14
+
+#define MBED_UART0        p9, p10
+#define MBED_UARTUSB      USBTX, USBRX
+
+#define MBED_I2C0         p28, p27
+
+#define MBED_ANALOGIN0    p15
+#define MBED_ANALOGIN1    p16
+#define MBED_ANALOGIN2    p17
+#define MBED_ANALOGIN3    p18
+#define MBED_ANALOGIN4    p19
+#define MBED_ANALOGIN5    p20
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif