mbed official
mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
Diff: targets/cmsis/TARGET_STM/TARGET_STM32L0/stm32l0xx_hal_lptim.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 113:b3775bf36a83
--- a/targets/cmsis/TARGET_STM/TARGET_STM32L0/stm32l0xx_hal_lptim.h Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32L0/stm32l0xx_hal_lptim.h Fri Sep 02 15:07:44 2016 +0100
@@ -1,661 +1,661 @@
-/**
- ******************************************************************************
- * @file stm32l0xx_hal_lptim.h
- * @author MCD Application Team
- * @version V1.5.0
- * @date 8-January-2016
- * @brief Header file of LPTIM HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32L0xx_HAL_LPTIM_H
-#define __STM32L0xx_HAL_LPTIM_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32l0xx_hal_def.h"
-
-/** @addtogroup STM32L0xx_HAL_Driver
- * @{
- */
-
-/** @defgroup LPTIM LPTIM (Low power timer)
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
- /** @defgroup LPTIM_Exported_Types LPTIM Exported Types
- * @{
- */
-
-/** @defgroup LPTIM_Clock_Configuration LPTIM Clock configuration structure
- * @{
- */
-/**
- * @brief LPTIM Clock configuration definition
- */
-typedef struct
-{
- uint32_t Source; /*!< Selects the clock source.
- This parameter can be a value of @ref LPTIM_Clock_Source */
-
- uint32_t Prescaler; /*!< Specifies the counter clock Prescaler.
- This parameter can be a value of @ref LPTIM_Clock_Prescaler */
-
-}LPTIM_ClockConfigTypeDef;
-/**
- * @}
- */
-
-/** @defgroup LPTIM_ULPClock_Configuration LPTIM ULP Clock configuration structure
- * @{
- */
-/**
- * @brief LPTIM ULP Clock configuration definition
- */
-typedef struct
-{
- uint32_t Polarity; /*!< Selects the polarity of the active edge for the counter unit
- if the ULPTIM input is selected.
- Note: This parameter is used only when Ultra low power clock source is used.
- Note: If the polarity is configured on 'both edges', an auxiliary clock
- (one of the Low power oscillator) must be active.
- This parameter can be a value of @ref LPTIM_Clock_Polarity */
-
- uint32_t SampleTime; /*!< Selects the clock sampling time to configure the clock glitch filter.
- Note: This parameter is used only when Ultra low power clock source is used.
- This parameter can be a value of @ref LPTIM_Clock_Sample_Time */
-
-}LPTIM_ULPClockConfigTypeDef;
-/**
- * @}
- */
-
-/** @defgroup LPTIM_Trigger_Configuration LPTIM Trigger configuration structure
- * @{
- */
-/**
- * @brief LPTIM Trigger configuration structure
- */
-typedef struct
-{
- uint32_t Source; /*!< Selects the Trigger source.
- This parameter can be a value of @ref LPTIM_Trigger_Source */
-
- uint32_t ActiveEdge; /*!< Selects the Trigger active edge.
- Note: This parameter is used only when an external trigger is used.
- This parameter can be a value of @ref LPTIM_External_Trigger_Polarity */
-
- uint32_t SampleTime; /*!< Selects the trigger sampling time to configure the clock glitch filter.
- Note: This parameter is used only when an external trigger is used.
- This parameter can be a value of @ref LPTIM_Trigger_Sample_Time */
-}LPTIM_TriggerConfigTypeDef;
-/**
- * @}
- */
-
-/** @defgroup LPTIM_Init_Configuration LPTIM Initialization configuration structure
- * @{
- */
-/**
- * @brief LPTIM Initialization Structure definition
- */
-typedef struct
-{
- LPTIM_ClockConfigTypeDef Clock; /*!< Specifies the clock parameters */
-
- LPTIM_ULPClockConfigTypeDef UltraLowPowerClock; /*!< Specifies the Ultra Low Power clock parameters */
-
- LPTIM_TriggerConfigTypeDef Trigger; /*!< Specifies the Trigger parameters */
-
- uint32_t OutputPolarity; /*!< Specifies the Output polarity.
- This parameter can be a value of @ref LPTIM_Output_Polarity */
-
- uint32_t UpdateMode; /*!< Specifies whether the update of the autorelaod and the compare
- values is done immediately or after the end of current period.
- This parameter can be a value of @ref LPTIM_Updating_Mode */
-
- uint32_t CounterSource; /*!< Specifies whether the counter is incremented each internal event
- or each external event.
- This parameter can be a value of @ref LPTIM_Counter_Source */
-
-}LPTIM_InitTypeDef;
-/**
- * @}
- */
-/** @defgroup LPTIM_State_structure LPTIM state definition
- * @{
- */
-/**
- * @brief HAL LPTIM State structure definition
- */
-typedef enum __HAL_LPTIM_StateTypeDef
-{
- HAL_LPTIM_STATE_RESET = 0x00, /*!< Peripheral not yet initialized or disabled */
- HAL_LPTIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
- HAL_LPTIM_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
- HAL_LPTIM_STATE_TIMEOUT = 0x03, /*!< Timeout state */
- HAL_LPTIM_STATE_ERROR = 0x04 /*!< Internal Process is ongoing */
-}HAL_LPTIM_StateTypeDef;
-/**
- * @}
- */
-
-/** @defgroup LPTIM_Handle LPTIM handler
- * @{
- */
-/**
- * @brief LPTIM handle Structure definition
- */
-typedef struct
-{
- LPTIM_TypeDef *Instance; /*!< Register base address */
-
- LPTIM_InitTypeDef Init; /*!< LPTIM required parameters */
-
- HAL_StatusTypeDef Status; /*!< LPTIM peripheral status */
-
- HAL_LockTypeDef Lock; /*!< LPTIM locking object */
-
- __IO HAL_LPTIM_StateTypeDef State; /*!< LPTIM peripheral state */
-
-}LPTIM_HandleTypeDef;
-
-/**
- * @}
- */
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup LPTIM_Exported_Constants LPTIM Exported constants
- * @{
- */
-
-/* Check autoreload value */
-#define IS_LPTIM_AUTORELOAD(__AUTORELOAD__) ((__AUTORELOAD__) <= 0x0000FFFF)
-
-/* Check compare value */
-#define IS_LPTIM_COMPARE(__COMPARE__) ((__COMPARE__) <= 0x0000FFFF)
-
-/** @defgroup LPTIM_Clock_Source Clock source
- * @{
- */
-#define LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC ((uint32_t)0x00)
-#define LPTIM_CLOCKSOURCE_ULPTIM LPTIM_CFGR_CKSEL
-/**
- * @}
- */
-#define IS_LPTIM_CLOCK_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_CLOCKSOURCE_ULPTIM) || \
- ((__SOURCE__) == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC))
-
-
-/** @defgroup LPTIM_Clock_Prescaler Prescaler
- * @{
- */
-#define LPTIM_PRESCALER_DIV1 ((uint32_t)0x000000)
-#define LPTIM_PRESCALER_DIV2 LPTIM_CFGR_PRESC_0
-#define LPTIM_PRESCALER_DIV4 LPTIM_CFGR_PRESC_1
-#define LPTIM_PRESCALER_DIV8 ((uint32_t)(LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_1))
-#define LPTIM_PRESCALER_DIV16 LPTIM_CFGR_PRESC_2
-#define LPTIM_PRESCALER_DIV32 ((uint32_t)(LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_2))
-#define LPTIM_PRESCALER_DIV64 ((uint32_t)(LPTIM_CFGR_PRESC_1 | LPTIM_CFGR_PRESC_2))
-#define LPTIM_PRESCALER_DIV128 ((uint32_t)LPTIM_CFGR_PRESC)
-/**
- * @}
- */
-
-#define IS_LPTIM_CLOCK_PRESCALER(__PRESCALER__) (((__PRESCALER__) == LPTIM_PRESCALER_DIV1 ) || \
- ((__PRESCALER__) == LPTIM_PRESCALER_DIV2 ) || \
- ((__PRESCALER__) == LPTIM_PRESCALER_DIV4 ) || \
- ((__PRESCALER__) == LPTIM_PRESCALER_DIV8 ) || \
- ((__PRESCALER__) == LPTIM_PRESCALER_DIV16 ) || \
- ((__PRESCALER__) == LPTIM_PRESCALER_DIV32 ) || \
- ((__PRESCALER__) == LPTIM_PRESCALER_DIV64 ) || \
- ((__PRESCALER__) == LPTIM_PRESCALER_DIV128))
-
-#define IS_LPTIM_CLOCK_PRESCALERDIV1(__PRESCALER__) ((__PRESCALER__) == LPTIM_PRESCALER_DIV1)
-
-
-/** @defgroup LPTIM_Output_Polarity Output polarity
- * @{
- */
-#define LPTIM_OUTPUTPOLARITY_HIGH ((uint32_t)0x00000000)
-#define LPTIM_OUTPUTPOLARITY_LOW (LPTIM_CFGR_WAVPOL)
-/**
- * @}
- */
-#define IS_LPTIM_OUTPUT_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_OUTPUTPOLARITY_LOW ) || \
- ((__POLARITY__) == LPTIM_OUTPUTPOLARITY_HIGH))
-
-/** @defgroup LPTIM_Clock_Sample_Time Clock sample time
- * @{
- */
-#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION ((uint32_t)0x00000000)
-#define LPTIM_CLOCKSAMPLETIME_2TRANSITIONS LPTIM_CFGR_CKFLT_0
-#define LPTIM_CLOCKSAMPLETIME_4TRANSITIONS LPTIM_CFGR_CKFLT_1
-#define LPTIM_CLOCKSAMPLETIME_8TRANSITIONS LPTIM_CFGR_CKFLT
-/**
- * @}
- */
-#define IS_LPTIM_CLOCK_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION) || \
- ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_2TRANSITIONS) || \
- ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_4TRANSITIONS) || \
- ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_8TRANSITIONS))
-
-/** @defgroup LPTIM_Clock_Polarity Clock polarity
- * @{
- */
-#define LPTIM_CLOCKPOLARITY_RISING ((uint32_t)0x00000000)
-#define LPTIM_CLOCKPOLARITY_FALLING LPTIM_CFGR_CKPOL_0
-#define LPTIM_CLOCKPOLARITY_RISING_FALLING LPTIM_CFGR_CKPOL_1
-/**
- * @}
- */
-
-#define IS_LPTIM_CLOCK_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING) || \
- ((__POLARITY__) == LPTIM_CLOCKPOLARITY_FALLING) || \
- ((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING_FALLING))
-
-/** @defgroup LPTIM_External_Trigger_Polarity Trigger polarity
- * @{
- */
-#define LPTIM_ACTIVEEDGE_RISING LPTIM_CFGR_TRIGEN_0
-#define LPTIM_ACTIVEEDGE_FALLING LPTIM_CFGR_TRIGEN_1
-#define LPTIM_ACTIVEEDGE_RISING_FALLING LPTIM_CFGR_TRIGEN
-/**
- * @}
- */
-#define IS_LPTIM_EXT_TRG_POLARITY(__POLAR__) (((__POLAR__) == LPTIM_ACTIVEEDGE_RISING ) || \
- ((__POLAR__) == LPTIM_ACTIVEEDGE_FALLING ) || \
- ((__POLAR__) == LPTIM_ACTIVEEDGE_RISING_FALLING ))
-
-/** @defgroup LPTIM_Trigger_Sample_Time Trigger sample time
- * @{
- */
-#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION ((uint32_t)0x00000000)
-#define LPTIM_TRIGSAMPLETIME_2TRANSITIONS LPTIM_CFGR_TRGFLT_0
-#define LPTIM_TRIGSAMPLETIME_4TRANSITIONS LPTIM_CFGR_TRGFLT_1
-#define LPTIM_TRIGSAMPLETIME_8TRANSITIONS LPTIM_CFGR_TRGFLT
-/**
- * @}
- */
-#define IS_LPTIM_TRIG_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION ) || \
- ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_2TRANSITIONS ) || \
- ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_4TRANSITIONS ) || \
- ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_8TRANSITIONS ))
-
-
-/** @defgroup LPTIM_Updating_Mode Updating mode
- * @{
- */
-
-#define LPTIM_UPDATE_IMMEDIATE ((uint32_t)0x00000000)
-#define LPTIM_UPDATE_ENDOFPERIOD LPTIM_CFGR_PRELOAD
-/**
- * @}
- */
-#define IS_LPTIM_UPDATE_MODE(__MODE__) (((__MODE__) == LPTIM_UPDATE_IMMEDIATE) || \
- ((__MODE__) == LPTIM_UPDATE_ENDOFPERIOD))
-
-
-
-/** @defgroup LPTIM_Counter_Source Counter source
- * @{
- */
-#define LPTIM_COUNTERSOURCE_INTERNAL ((uint32_t)0x00000000)
-#define LPTIM_COUNTERSOURCE_EXTERNAL LPTIM_CFGR_COUNTMODE
-/**
- * @}
- */
-#define IS_LPTIM_COUNTER_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_COUNTERSOURCE_INTERNAL) || \
- ((__SOURCE__) == LPTIM_COUNTERSOURCE_EXTERNAL))
-
-
-
-/* Check for period value */
-#define IS_LPTIM_PERIOD(__PERIOD__) ((__PERIOD__) <= 0x0000FFFF)
-
-/* Check for pulse value */
-#define IS_LPTIM_PULSE(__PULSE__) ((__PULSE__) <= 0x0000FFFF)
-
-/** @defgroup LPTIM_Flag_Definition Flag definition
- * @{
- */
-#define LPTIM_FLAG_DOWN LPTIM_ISR_DOWN
-#define LPTIM_FLAG_UP LPTIM_ISR_UP
-#define LPTIM_FLAG_ARROK LPTIM_ISR_ARROK
-#define LPTIM_FLAG_CMPOK LPTIM_ISR_CMPOK
-#define LPTIM_FLAG_EXTTRIG LPTIM_ISR_EXTTRIG
-#define LPTIM_FLAG_ARRM LPTIM_ISR_ARRM
-#define LPTIM_FLAG_CMPM LPTIM_ISR_CMPM
-/**
- * @}
- */
-
-/** @defgroup LPTIM_Interrupts_Definition Interrupts definition
- * @{
- */
-#define LPTIM_IT_DOWN LPTIM_IER_DOWNIE
-#define LPTIM_IT_UP LPTIM_IER_UPIE
-#define LPTIM_IT_ARROK LPTIM_IER_ARROKIE
-#define LPTIM_IT_CMPOK LPTIM_IER_CMPOKIE
-#define LPTIM_IT_EXTTRIG LPTIM_IER_EXTTRIGIE
-#define LPTIM_IT_ARRM LPTIM_IER_ARRMIE
-#define LPTIM_IT_CMPM LPTIM_IER_CMPMIE
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-
-/** @defgroup LPTIM_Exported_Macros LPTIM Exported Macros
- * @{
- */
-
-/** @brief Reset LPTIM handle state
- * @param __HANDLE__: LPTIM handle
- * @retval None
- */
-#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LPTIM_STATE_RESET)
-
-/**
- * @brief Enable/Disable the LPTIM peripheral.
- * @param __HANDLE__: LPTIM handle
- * @retval None
- */
-#define __HAL_LPTIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (LPTIM_CR_ENABLE))
-#define __HAL_LPTIM_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(LPTIM_CR_ENABLE))
-
-/**
- * @brief Starts the LPTIM peripheral in Continuous or in single mode.
- * @param __HANDLE__: DMA handle
- * @retval None
- */
-#define __HAL_LPTIM_START_CONTINUOUS(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_CNTSTRT)
-#define __HAL_LPTIM_START_SINGLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_SNGSTRT)
-
-
-/**
- * @brief Writes the passed parameter in the Autoreload register.
- * @param __HANDLE__: LPTIM handle
- * @param __VALUE__ : Autoreload value
- * @retval None
- */
-#define __HAL_LPTIM_AUTORELOAD_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->ARR = (__VALUE__))
-
-/**
- * @brief Writes the passed parameter in the Compare register.
- * @param __HANDLE__: LPTIM handle
- * @param __VALUE__ : Compare value
- * @retval None
- */
-#define __HAL_LPTIM_COMPARE_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->CMP = (__VALUE__))
-
-/**
- * @brief Checks whether the specified LPTIM flag is set or not.
- * @param __HANDLE__: LPTIM handle
- * @param __FLAG__ : LPTIM flag to check
- * This parameter can be a value of:
- * @arg LPTIM_FLAG_DOWN : Counter direction change up Flag.
- * @arg LPTIM_FLAG_UP : Counter direction change down to up Flag.
- * @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag.
- * @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag.
- * @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.
- * @arg LPTIM_FLAG_ARRM : Autoreload match Flag.
- * @arg LPTIM_FLAG_CMPM : Compare match Flag.
- * @retval The state of the specified flag (SET or RESET).
- */
-#define __HAL_LPTIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR &(__FLAG__)) == (__FLAG__))
-
-/**
- * @brief Clears the specified LPTIM flag.
- * @param __HANDLE__: LPTIM handle.
- * @param __FLAG__ : LPTIM flag to clear.
- * This parameter can be a value of:
- * @arg LPTIM_FLAG_DOWN : Counter direction change up Flag.
- * @arg LPTIM_FLAG_UP : Counter direction change down to up Flag.
- * @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag.
- * @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag.
- * @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.
- * @arg LPTIM_FLAG_ARRM : Autoreload match Flag.
- * @arg LPTIM_FLAG_CMPM : Compare match Flag.
- * @retval None.
- */
-#define __HAL_LPTIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
-
-/**
- * @brief Enable the specified LPTIM interrupt.
- * @param __HANDLE__ : LPTIM handle.
- * @param __INTERRUPT__ : LPTIM interrupt to set.
- * This parameter can be a value of:
- * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
- * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
- * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
- * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
- * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
- * @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
- * @arg LPTIM_IT_CMPM : Compare match Interrupt.
- * @retval None.
- */
-#define __HAL_LPTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
-
- /**
- * @brief Disable the specified LPTIM interrupt.
- * @param __HANDLE__ : LPTIM handle.
- * @param __INTERRUPT__ : LPTIM interrupt to set.
- * This parameter can be a value of:
- * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
- * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
- * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
- * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
- * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
- * @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
- * @arg LPTIM_IT_CMPM : Compare match Interrupt.
- * @retval None.
- */
-#define __HAL_LPTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
-
- /**
- * @brief Checks whether the specified LPTIM interrupt is set or not.
- * @param __HANDLE__ : LPTIM handle.
- * @param __INTERRUPT__ : LPTIM interrupt to check.
- * This parameter can be a value of:
- * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
- * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
- * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
- * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
- * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
- * @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
- * @arg LPTIM_IT_CMPM : Compare match Interrupt.
- * @retval Interrupt status.
- */
-
-#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
-
-/**
- * @}
- */
-
-
-/* Include LPTIM HAL Extension module */
-#include "stm32l0xx_hal_lptim_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions
- * @{
- */
-/* Initialization/de-initialization functions ********************************/
-
-/** @defgroup LPTIM_Exported_Functions_Group1 Initialization/de-initialization functions
- * @{
- */
-HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim);
-HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim);
-
-
-/* MSP functions *************************************************************/
-
-void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim);
-void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim);
-
-/**
- * @}
- */
-
-/* Start/Stop operation functions *********************************************/
-
-/** @defgroup LPTIM_Exported_Functions_Group2 LPTIM Start-Stop operation functions
- * @{
- */
-
-/* ################################# PWM Mode ################################*/
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
-HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
-HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim);
-
-/* ############################# One Pulse Mode ##############################*/
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
-HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
-HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim);
-
-/* ############################## Set once Mode ##############################*/
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
-HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
-HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim);
-
-/* ############################### Encoder Mode ##############################*/
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
-HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
-HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim);
-
-/* ############################# Time out Mode ##############################*/
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);
-HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);
-HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim);
-
-/* ############################## Counter Mode ###############################*/
-/* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
-HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
-HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim);
-
-/**
- * @}
- */
-
-/* Reading operation functions ************************************************/
-
-/** @defgroup LPTIM_Exported_Functions_Group3 LPTIM Read operation functions
- * @{
- */
-uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim);
-uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim);
-uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim);
-/**
- * @}
- */
-
-/* LPTIM IRQ functions *******************************************************/
-/** @defgroup LPTIM_Exported_Functions_Group4 LPTIM IRQ handler
- * @{
- */
-void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim);
-
-/* CallBack functions ********************************************************/
-void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim);
-void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim);
-void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim);
-void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim);
-void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim);
-void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim);
-void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim);
-/**
- * @}
- */
-/* Peripheral State functions ************************************************/
-/** @defgroup LPTIM_Exported_Functions_Group5 Peripheral State functions
- * @{
- */
-
-HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32L0xx_HAL_LPTIM_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
+/**
+ ******************************************************************************
+ * @file stm32l0xx_hal_lptim.h
+ * @author MCD Application Team
+ * @version V1.5.0
+ * @date 8-January-2016
+ * @brief Header file of LPTIM HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L0xx_HAL_LPTIM_H
+#define __STM32L0xx_HAL_LPTIM_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l0xx_hal_def.h"
+
+/** @addtogroup STM32L0xx_HAL_Driver
+ * @{
+ */
+
+/** @defgroup LPTIM LPTIM (Low power timer)
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+ /** @defgroup LPTIM_Exported_Types LPTIM Exported Types
+ * @{
+ */
+
+/** @defgroup LPTIM_Clock_Configuration LPTIM Clock configuration structure
+ * @{
+ */
+/**
+ * @brief LPTIM Clock configuration definition
+ */
+typedef struct
+{
+ uint32_t Source; /*!< Selects the clock source.
+ This parameter can be a value of @ref LPTIM_Clock_Source */
+
+ uint32_t Prescaler; /*!< Specifies the counter clock Prescaler.
+ This parameter can be a value of @ref LPTIM_Clock_Prescaler */
+
+}LPTIM_ClockConfigTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_ULPClock_Configuration LPTIM ULP Clock configuration structure
+ * @{
+ */
+/**
+ * @brief LPTIM ULP Clock configuration definition
+ */
+typedef struct
+{
+ uint32_t Polarity; /*!< Selects the polarity of the active edge for the counter unit
+ if the ULPTIM input is selected.
+ Note: This parameter is used only when Ultra low power clock source is used.
+ Note: If the polarity is configured on 'both edges', an auxiliary clock
+ (one of the Low power oscillator) must be active.
+ This parameter can be a value of @ref LPTIM_Clock_Polarity */
+
+ uint32_t SampleTime; /*!< Selects the clock sampling time to configure the clock glitch filter.
+ Note: This parameter is used only when Ultra low power clock source is used.
+ This parameter can be a value of @ref LPTIM_Clock_Sample_Time */
+
+}LPTIM_ULPClockConfigTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Trigger_Configuration LPTIM Trigger configuration structure
+ * @{
+ */
+/**
+ * @brief LPTIM Trigger configuration structure
+ */
+typedef struct
+{
+ uint32_t Source; /*!< Selects the Trigger source.
+ This parameter can be a value of @ref LPTIM_Trigger_Source */
+
+ uint32_t ActiveEdge; /*!< Selects the Trigger active edge.
+ Note: This parameter is used only when an external trigger is used.
+ This parameter can be a value of @ref LPTIM_External_Trigger_Polarity */
+
+ uint32_t SampleTime; /*!< Selects the trigger sampling time to configure the clock glitch filter.
+ Note: This parameter is used only when an external trigger is used.
+ This parameter can be a value of @ref LPTIM_Trigger_Sample_Time */
+}LPTIM_TriggerConfigTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Init_Configuration LPTIM Initialization configuration structure
+ * @{
+ */
+/**
+ * @brief LPTIM Initialization Structure definition
+ */
+typedef struct
+{
+ LPTIM_ClockConfigTypeDef Clock; /*!< Specifies the clock parameters */
+
+ LPTIM_ULPClockConfigTypeDef UltraLowPowerClock; /*!< Specifies the Ultra Low Power clock parameters */
+
+ LPTIM_TriggerConfigTypeDef Trigger; /*!< Specifies the Trigger parameters */
+
+ uint32_t OutputPolarity; /*!< Specifies the Output polarity.
+ This parameter can be a value of @ref LPTIM_Output_Polarity */
+
+ uint32_t UpdateMode; /*!< Specifies whether the update of the autorelaod and the compare
+ values is done immediately or after the end of current period.
+ This parameter can be a value of @ref LPTIM_Updating_Mode */
+
+ uint32_t CounterSource; /*!< Specifies whether the counter is incremented each internal event
+ or each external event.
+ This parameter can be a value of @ref LPTIM_Counter_Source */
+
+}LPTIM_InitTypeDef;
+/**
+ * @}
+ */
+/** @defgroup LPTIM_State_structure LPTIM state definition
+ * @{
+ */
+/**
+ * @brief HAL LPTIM State structure definition
+ */
+typedef enum __HAL_LPTIM_StateTypeDef
+{
+ HAL_LPTIM_STATE_RESET = 0x00, /*!< Peripheral not yet initialized or disabled */
+ HAL_LPTIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_LPTIM_STATE_BUSY = 0x02, /*!< An internal process is ongoing */
+ HAL_LPTIM_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_LPTIM_STATE_ERROR = 0x04 /*!< Internal Process is ongoing */
+}HAL_LPTIM_StateTypeDef;
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Handle LPTIM handler
+ * @{
+ */
+/**
+ * @brief LPTIM handle Structure definition
+ */
+typedef struct
+{
+ LPTIM_TypeDef *Instance; /*!< Register base address */
+
+ LPTIM_InitTypeDef Init; /*!< LPTIM required parameters */
+
+ HAL_StatusTypeDef Status; /*!< LPTIM peripheral status */
+
+ HAL_LockTypeDef Lock; /*!< LPTIM locking object */
+
+ __IO HAL_LPTIM_StateTypeDef State; /*!< LPTIM peripheral state */
+
+}LPTIM_HandleTypeDef;
+
+/**
+ * @}
+ */
+/**
+ * @}
+ */
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup LPTIM_Exported_Constants LPTIM Exported constants
+ * @{
+ */
+
+/* Check autoreload value */
+#define IS_LPTIM_AUTORELOAD(__AUTORELOAD__) ((__AUTORELOAD__) <= 0x0000FFFF)
+
+/* Check compare value */
+#define IS_LPTIM_COMPARE(__COMPARE__) ((__COMPARE__) <= 0x0000FFFF)
+
+/** @defgroup LPTIM_Clock_Source Clock source
+ * @{
+ */
+#define LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC ((uint32_t)0x00)
+#define LPTIM_CLOCKSOURCE_ULPTIM LPTIM_CFGR_CKSEL
+/**
+ * @}
+ */
+#define IS_LPTIM_CLOCK_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_CLOCKSOURCE_ULPTIM) || \
+ ((__SOURCE__) == LPTIM_CLOCKSOURCE_APBCLOCK_LPOSC))
+
+
+/** @defgroup LPTIM_Clock_Prescaler Prescaler
+ * @{
+ */
+#define LPTIM_PRESCALER_DIV1 ((uint32_t)0x000000)
+#define LPTIM_PRESCALER_DIV2 LPTIM_CFGR_PRESC_0
+#define LPTIM_PRESCALER_DIV4 LPTIM_CFGR_PRESC_1
+#define LPTIM_PRESCALER_DIV8 ((uint32_t)(LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_1))
+#define LPTIM_PRESCALER_DIV16 LPTIM_CFGR_PRESC_2
+#define LPTIM_PRESCALER_DIV32 ((uint32_t)(LPTIM_CFGR_PRESC_0 | LPTIM_CFGR_PRESC_2))
+#define LPTIM_PRESCALER_DIV64 ((uint32_t)(LPTIM_CFGR_PRESC_1 | LPTIM_CFGR_PRESC_2))
+#define LPTIM_PRESCALER_DIV128 ((uint32_t)LPTIM_CFGR_PRESC)
+/**
+ * @}
+ */
+
+#define IS_LPTIM_CLOCK_PRESCALER(__PRESCALER__) (((__PRESCALER__) == LPTIM_PRESCALER_DIV1 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV2 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV4 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV8 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV16 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV32 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV64 ) || \
+ ((__PRESCALER__) == LPTIM_PRESCALER_DIV128))
+
+#define IS_LPTIM_CLOCK_PRESCALERDIV1(__PRESCALER__) ((__PRESCALER__) == LPTIM_PRESCALER_DIV1)
+
+
+/** @defgroup LPTIM_Output_Polarity Output polarity
+ * @{
+ */
+#define LPTIM_OUTPUTPOLARITY_HIGH ((uint32_t)0x00000000)
+#define LPTIM_OUTPUTPOLARITY_LOW (LPTIM_CFGR_WAVPOL)
+/**
+ * @}
+ */
+#define IS_LPTIM_OUTPUT_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_OUTPUTPOLARITY_LOW ) || \
+ ((__POLARITY__) == LPTIM_OUTPUTPOLARITY_HIGH))
+
+/** @defgroup LPTIM_Clock_Sample_Time Clock sample time
+ * @{
+ */
+#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION ((uint32_t)0x00000000)
+#define LPTIM_CLOCKSAMPLETIME_2TRANSITIONS LPTIM_CFGR_CKFLT_0
+#define LPTIM_CLOCKSAMPLETIME_4TRANSITIONS LPTIM_CFGR_CKFLT_1
+#define LPTIM_CLOCKSAMPLETIME_8TRANSITIONS LPTIM_CFGR_CKFLT
+/**
+ * @}
+ */
+#define IS_LPTIM_CLOCK_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION) || \
+ ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_2TRANSITIONS) || \
+ ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_4TRANSITIONS) || \
+ ((__SAMPLETIME__) == LPTIM_CLOCKSAMPLETIME_8TRANSITIONS))
+
+/** @defgroup LPTIM_Clock_Polarity Clock polarity
+ * @{
+ */
+#define LPTIM_CLOCKPOLARITY_RISING ((uint32_t)0x00000000)
+#define LPTIM_CLOCKPOLARITY_FALLING LPTIM_CFGR_CKPOL_0
+#define LPTIM_CLOCKPOLARITY_RISING_FALLING LPTIM_CFGR_CKPOL_1
+/**
+ * @}
+ */
+
+#define IS_LPTIM_CLOCK_POLARITY(__POLARITY__) (((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING) || \
+ ((__POLARITY__) == LPTIM_CLOCKPOLARITY_FALLING) || \
+ ((__POLARITY__) == LPTIM_CLOCKPOLARITY_RISING_FALLING))
+
+/** @defgroup LPTIM_External_Trigger_Polarity Trigger polarity
+ * @{
+ */
+#define LPTIM_ACTIVEEDGE_RISING LPTIM_CFGR_TRIGEN_0
+#define LPTIM_ACTIVEEDGE_FALLING LPTIM_CFGR_TRIGEN_1
+#define LPTIM_ACTIVEEDGE_RISING_FALLING LPTIM_CFGR_TRIGEN
+/**
+ * @}
+ */
+#define IS_LPTIM_EXT_TRG_POLARITY(__POLAR__) (((__POLAR__) == LPTIM_ACTIVEEDGE_RISING ) || \
+ ((__POLAR__) == LPTIM_ACTIVEEDGE_FALLING ) || \
+ ((__POLAR__) == LPTIM_ACTIVEEDGE_RISING_FALLING ))
+
+/** @defgroup LPTIM_Trigger_Sample_Time Trigger sample time
+ * @{
+ */
+#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION ((uint32_t)0x00000000)
+#define LPTIM_TRIGSAMPLETIME_2TRANSITIONS LPTIM_CFGR_TRGFLT_0
+#define LPTIM_TRIGSAMPLETIME_4TRANSITIONS LPTIM_CFGR_TRGFLT_1
+#define LPTIM_TRIGSAMPLETIME_8TRANSITIONS LPTIM_CFGR_TRGFLT
+/**
+ * @}
+ */
+#define IS_LPTIM_TRIG_SAMPLE_TIME(__SAMPLETIME__) (((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION ) || \
+ ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_2TRANSITIONS ) || \
+ ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_4TRANSITIONS ) || \
+ ((__SAMPLETIME__) == LPTIM_TRIGSAMPLETIME_8TRANSITIONS ))
+
+
+/** @defgroup LPTIM_Updating_Mode Updating mode
+ * @{
+ */
+
+#define LPTIM_UPDATE_IMMEDIATE ((uint32_t)0x00000000)
+#define LPTIM_UPDATE_ENDOFPERIOD LPTIM_CFGR_PRELOAD
+/**
+ * @}
+ */
+#define IS_LPTIM_UPDATE_MODE(__MODE__) (((__MODE__) == LPTIM_UPDATE_IMMEDIATE) || \
+ ((__MODE__) == LPTIM_UPDATE_ENDOFPERIOD))
+
+
+
+/** @defgroup LPTIM_Counter_Source Counter source
+ * @{
+ */
+#define LPTIM_COUNTERSOURCE_INTERNAL ((uint32_t)0x00000000)
+#define LPTIM_COUNTERSOURCE_EXTERNAL LPTIM_CFGR_COUNTMODE
+/**
+ * @}
+ */
+#define IS_LPTIM_COUNTER_SOURCE(__SOURCE__) (((__SOURCE__) == LPTIM_COUNTERSOURCE_INTERNAL) || \
+ ((__SOURCE__) == LPTIM_COUNTERSOURCE_EXTERNAL))
+
+
+
+/* Check for period value */
+#define IS_LPTIM_PERIOD(__PERIOD__) ((__PERIOD__) <= 0x0000FFFF)
+
+/* Check for pulse value */
+#define IS_LPTIM_PULSE(__PULSE__) ((__PULSE__) <= 0x0000FFFF)
+
+/** @defgroup LPTIM_Flag_Definition Flag definition
+ * @{
+ */
+#define LPTIM_FLAG_DOWN LPTIM_ISR_DOWN
+#define LPTIM_FLAG_UP LPTIM_ISR_UP
+#define LPTIM_FLAG_ARROK LPTIM_ISR_ARROK
+#define LPTIM_FLAG_CMPOK LPTIM_ISR_CMPOK
+#define LPTIM_FLAG_EXTTRIG LPTIM_ISR_EXTTRIG
+#define LPTIM_FLAG_ARRM LPTIM_ISR_ARRM
+#define LPTIM_FLAG_CMPM LPTIM_ISR_CMPM
+/**
+ * @}
+ */
+
+/** @defgroup LPTIM_Interrupts_Definition Interrupts definition
+ * @{
+ */
+#define LPTIM_IT_DOWN LPTIM_IER_DOWNIE
+#define LPTIM_IT_UP LPTIM_IER_UPIE
+#define LPTIM_IT_ARROK LPTIM_IER_ARROKIE
+#define LPTIM_IT_CMPOK LPTIM_IER_CMPOKIE
+#define LPTIM_IT_EXTTRIG LPTIM_IER_EXTTRIGIE
+#define LPTIM_IT_ARRM LPTIM_IER_ARRMIE
+#define LPTIM_IT_CMPM LPTIM_IER_CMPMIE
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup LPTIM_Exported_Macros LPTIM Exported Macros
+ * @{
+ */
+
+/** @brief Reset LPTIM handle state
+ * @param __HANDLE__: LPTIM handle
+ * @retval None
+ */
+#define __HAL_LPTIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LPTIM_STATE_RESET)
+
+/**
+ * @brief Enable/Disable the LPTIM peripheral.
+ * @param __HANDLE__: LPTIM handle
+ * @retval None
+ */
+#define __HAL_LPTIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (LPTIM_CR_ENABLE))
+#define __HAL_LPTIM_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(LPTIM_CR_ENABLE))
+
+/**
+ * @brief Starts the LPTIM peripheral in Continuous or in single mode.
+ * @param __HANDLE__: DMA handle
+ * @retval None
+ */
+#define __HAL_LPTIM_START_CONTINUOUS(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_CNTSTRT)
+#define __HAL_LPTIM_START_SINGLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= LPTIM_CR_SNGSTRT)
+
+
+/**
+ * @brief Writes the passed parameter in the Autoreload register.
+ * @param __HANDLE__: LPTIM handle
+ * @param __VALUE__ : Autoreload value
+ * @retval None
+ */
+#define __HAL_LPTIM_AUTORELOAD_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->ARR = (__VALUE__))
+
+/**
+ * @brief Writes the passed parameter in the Compare register.
+ * @param __HANDLE__: LPTIM handle
+ * @param __VALUE__ : Compare value
+ * @retval None
+ */
+#define __HAL_LPTIM_COMPARE_SET(__HANDLE__ , __VALUE__) ((__HANDLE__)->Instance->CMP = (__VALUE__))
+
+/**
+ * @brief Checks whether the specified LPTIM flag is set or not.
+ * @param __HANDLE__: LPTIM handle
+ * @param __FLAG__ : LPTIM flag to check
+ * This parameter can be a value of:
+ * @arg LPTIM_FLAG_DOWN : Counter direction change up Flag.
+ * @arg LPTIM_FLAG_UP : Counter direction change down to up Flag.
+ * @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag.
+ * @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag.
+ * @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.
+ * @arg LPTIM_FLAG_ARRM : Autoreload match Flag.
+ * @arg LPTIM_FLAG_CMPM : Compare match Flag.
+ * @retval The state of the specified flag (SET or RESET).
+ */
+#define __HAL_LPTIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR &(__FLAG__)) == (__FLAG__))
+
+/**
+ * @brief Clears the specified LPTIM flag.
+ * @param __HANDLE__: LPTIM handle.
+ * @param __FLAG__ : LPTIM flag to clear.
+ * This parameter can be a value of:
+ * @arg LPTIM_FLAG_DOWN : Counter direction change up Flag.
+ * @arg LPTIM_FLAG_UP : Counter direction change down to up Flag.
+ * @arg LPTIM_FLAG_ARROK : Autoreload register update OK Flag.
+ * @arg LPTIM_FLAG_CMPOK : Compare register update OK Flag.
+ * @arg LPTIM_FLAG_EXTTRIG : External trigger edge event Flag.
+ * @arg LPTIM_FLAG_ARRM : Autoreload match Flag.
+ * @arg LPTIM_FLAG_CMPM : Compare match Flag.
+ * @retval None.
+ */
+#define __HAL_LPTIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__))
+
+/**
+ * @brief Enable the specified LPTIM interrupt.
+ * @param __HANDLE__ : LPTIM handle.
+ * @param __INTERRUPT__ : LPTIM interrupt to set.
+ * This parameter can be a value of:
+ * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
+ * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
+ * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
+ * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
+ * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+ * @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
+ * @arg LPTIM_IT_CMPM : Compare match Interrupt.
+ * @retval None.
+ */
+#define __HAL_LPTIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__))
+
+ /**
+ * @brief Disable the specified LPTIM interrupt.
+ * @param __HANDLE__ : LPTIM handle.
+ * @param __INTERRUPT__ : LPTIM interrupt to set.
+ * This parameter can be a value of:
+ * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
+ * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
+ * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
+ * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
+ * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+ * @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
+ * @arg LPTIM_IT_CMPM : Compare match Interrupt.
+ * @retval None.
+ */
+#define __HAL_LPTIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__)))
+
+ /**
+ * @brief Checks whether the specified LPTIM interrupt is set or not.
+ * @param __HANDLE__ : LPTIM handle.
+ * @param __INTERRUPT__ : LPTIM interrupt to check.
+ * This parameter can be a value of:
+ * @arg LPTIM_IT_DOWN : Counter direction change up Interrupt.
+ * @arg LPTIM_IT_UP : Counter direction change down to up Interrupt.
+ * @arg LPTIM_IT_ARROK : Autoreload register update OK Interrupt.
+ * @arg LPTIM_IT_CMPOK : Compare register update OK Interrupt.
+ * @arg LPTIM_IT_EXTTRIG : External trigger edge event Interrupt.
+ * @arg LPTIM_IT_ARRM : Autoreload match Interrupt.
+ * @arg LPTIM_IT_CMPM : Compare match Interrupt.
+ * @retval Interrupt status.
+ */
+
+#define __HAL_LPTIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/**
+ * @}
+ */
+
+
+/* Include LPTIM HAL Extension module */
+#include "stm32l0xx_hal_lptim_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+
+/** @defgroup LPTIM_Exported_Functions LPTIM Exported Functions
+ * @{
+ */
+/* Initialization/de-initialization functions ********************************/
+
+/** @defgroup LPTIM_Exported_Functions_Group1 Initialization/de-initialization functions
+ * @{
+ */
+HAL_StatusTypeDef HAL_LPTIM_Init(LPTIM_HandleTypeDef *hlptim);
+HAL_StatusTypeDef HAL_LPTIM_DeInit(LPTIM_HandleTypeDef *hlptim);
+
+
+/* MSP functions *************************************************************/
+
+void HAL_LPTIM_MspInit(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_MspDeInit(LPTIM_HandleTypeDef *hlptim);
+
+/**
+ * @}
+ */
+
+/* Start/Stop operation functions *********************************************/
+
+/** @defgroup LPTIM_Exported_Functions_Group2 LPTIM Start-Stop operation functions
+ * @{
+ */
+
+/* ################################# PWM Mode ################################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_PWM_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_PWM_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################# One Pulse Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_OnePulse_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################## Set once Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Pulse);
+HAL_StatusTypeDef HAL_LPTIM_SetOnce_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################### Encoder Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Encoder_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################# Time out Mode ##############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period, uint32_t Timeout);
+HAL_StatusTypeDef HAL_LPTIM_TimeOut_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/* ############################## Counter Mode ###############################*/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop(LPTIM_HandleTypeDef *hlptim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_LPTIM_Counter_Start_IT(LPTIM_HandleTypeDef *hlptim, uint32_t Period);
+HAL_StatusTypeDef HAL_LPTIM_Counter_Stop_IT(LPTIM_HandleTypeDef *hlptim);
+
+/**
+ * @}
+ */
+
+/* Reading operation functions ************************************************/
+
+/** @defgroup LPTIM_Exported_Functions_Group3 LPTIM Read operation functions
+ * @{
+ */
+uint32_t HAL_LPTIM_ReadCounter(LPTIM_HandleTypeDef *hlptim);
+uint32_t HAL_LPTIM_ReadAutoReload(LPTIM_HandleTypeDef *hlptim);
+uint32_t HAL_LPTIM_ReadCompare(LPTIM_HandleTypeDef *hlptim);
+/**
+ * @}
+ */
+
+/* LPTIM IRQ functions *******************************************************/
+/** @defgroup LPTIM_Exported_Functions_Group4 LPTIM IRQ handler
+ * @{
+ */
+void HAL_LPTIM_IRQHandler(LPTIM_HandleTypeDef *hlptim);
+
+/* CallBack functions ********************************************************/
+void HAL_LPTIM_CompareMatchCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_AutoReloadMatchCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_TriggerCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_CompareWriteCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_AutoReloadWriteCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_DirectionUpCallback(LPTIM_HandleTypeDef *hlptim);
+void HAL_LPTIM_DirectionDownCallback(LPTIM_HandleTypeDef *hlptim);
+/**
+ * @}
+ */
+/* Peripheral State functions ************************************************/
+/** @defgroup LPTIM_Exported_Functions_Group5 Peripheral State functions
+ * @{
+ */
+
+HAL_LPTIM_StateTypeDef HAL_LPTIM_GetState(LPTIM_HandleTypeDef *hlptim);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L0xx_HAL_LPTIM_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
