mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
Diff: targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_uart_ex.h
- Revision:
- 144:ef7eb2e8f9f7
- Parent:
- 0:9b334a45a8ff
--- a/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_uart_ex.h Tue Aug 02 14:07:36 2016 +0000 +++ b/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_uart_ex.h Fri Sep 02 15:07:44 2016 +0100 @@ -1,863 +1,863 @@ -/** - ****************************************************************************** - * @file stm32f0xx_hal_uart_ex.h - * @author MCD Application Team - * @version V1.3.0 - * @date 26-June-2015 - * @brief Header file of UART HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F0xx_HAL_UART_EX_H -#define __STM32F0xx_HAL_UART_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f0xx_hal_def.h" - -/** @addtogroup STM32F0xx_HAL_Driver - * @{ - */ - -/** @addtogroup UARTEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -/** @defgroup UARTEx_Exported_Types UARTEx Exported Types - * @{ - */ - -/** - * @brief UART wake up from stop mode parameters - */ -typedef struct -{ - uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF). - This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. - If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must - be filled up. */ - - uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. - This parameter can be a value of @ref UART_WakeUp_Address_Length */ - - uint8_t Address; /*!< UART/USART node address (7-bit long max) */ -} UART_WakeUpTypeDef; - -/** - * @} - */ -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants - * @{ - */ - -/** @defgroup UARTEx_Word_Length UARTEx Word Length - * @{ - */ -#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ - defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ - defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) -#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1) -#define UART_WORDLENGTH_8B ((uint32_t)0x00000000) -#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) -#else -#define UART_WORDLENGTH_8B ((uint32_t)0x00000000) -#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) -#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ - defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ - defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ -/** - * @} - */ - -/** @defgroup UARTEx_AutoBaud_Rate_Mode UARTEx Advanced Feature AutoBaud Rate Mode - * @{ - */ -#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ - defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ - defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) -#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x00000000) /*!< Auto Baud rate detection on start bit */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) /*!< Auto Baud rate detection on falling edge */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1) /*!< Auto Baud rate detection on 0x7F frame detection */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE) /*!< Auto Baud rate detection on 0x55 frame detection */ -#else -#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x00000000) /*!< Auto Baud rate detection on start bit */ -#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) /*!< Auto Baud rate detection on falling edge */ -#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ - defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ - defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ -/** - * @} - */ - -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -/** @defgroup UARTEx_LIN UARTEx Local Interconnection Network mode - * @{ - */ -#define UART_LIN_DISABLE ((uint32_t)0x00000000) /*!< Local Interconnect Network disable */ -#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN) /*!< Local Interconnect Network enable */ -/** - * @} - */ - -/** @defgroup UARTEx_LIN_Break_Detection UARTEx LIN Break Detection - * @{ - */ -#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) /*!< LIN 10-bit break detection length */ -#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL) /*!< LIN 11-bit break detection length */ -/** - * @} - */ -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ - -/** @defgroup UART_Flags UARTEx Status Flags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the ISR register - * @{ - */ -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -#define UART_FLAG_REACK ((uint32_t)0x00400000) -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ -#define UART_FLAG_TEACK ((uint32_t)0x00200000) -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -#define UART_FLAG_WUF ((uint32_t)0x00100000) -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ -#define UART_FLAG_RWU ((uint32_t)0x00080000) -#define UART_FLAG_SBKF ((uint32_t)0x00040000 -#define UART_FLAG_CMF ((uint32_t)0x00020000) -#define UART_FLAG_BUSY ((uint32_t)0x00010000) -#define UART_FLAG_ABRF ((uint32_t)0x00008000) -#define UART_FLAG_ABRE ((uint32_t)0x00004000) -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -#define UART_FLAG_EOBF ((uint32_t)0x00001000) -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ -#define UART_FLAG_RTOF ((uint32_t)0x00000800) -#define UART_FLAG_CTS ((uint32_t)0x00000400) -#define UART_FLAG_CTSIF ((uint32_t)0x00000200) -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -#define UART_FLAG_LBDF ((uint32_t)0x00000100) -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ -#define UART_FLAG_TXE ((uint32_t)0x00000080) -#define UART_FLAG_TC ((uint32_t)0x00000040) -#define UART_FLAG_RXNE ((uint32_t)0x00000020) -#define UART_FLAG_IDLE ((uint32_t)0x00000010) -#define UART_FLAG_ORE ((uint32_t)0x00000008) -#define UART_FLAG_NE ((uint32_t)0x00000004) -#define UART_FLAG_FE ((uint32_t)0x00000002) -#define UART_FLAG_PE ((uint32_t)0x00000001) -/** - * @} - */ - -/** @defgroup UART_Interrupt_definition UARTEx Interrupts Definition - * Elements values convention: 0000ZZZZZ0XXYYYYYb - * - YYYYY : Interrupt source position in the XX register (5bits) - * - XX : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - * - ZZZZZ : Flag position in the ISR register(5bits) - * @{ - */ -#define UART_IT_PE ((uint16_t)0x0028) -#define UART_IT_TXE ((uint16_t)0x0727) -#define UART_IT_TC ((uint16_t)0x0626) -#define UART_IT_RXNE ((uint16_t)0x0525) -#define UART_IT_IDLE ((uint16_t)0x0424) -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -#define UART_IT_LBD ((uint16_t)0x0846) -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ -#define UART_IT_CTS ((uint16_t)0x096A) -#define UART_IT_CM ((uint16_t)0x112E) -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -#define UART_IT_WUF ((uint16_t)0x1476) -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ -/** - * @} - */ - - -/** @defgroup UART_IT_CLEAR_Flags UARTEx Interruption Clear Flags - * @{ - */ -#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ -#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ -#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */ -#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ -#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ -#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag (not available on F030xx devices)*/ -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ -#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ -#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */ -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */ -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ -#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ -/** - * @} - */ - -/** @defgroup UART_Request_Parameters UARTEx Request Parameters - * @{ - */ -#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */ -#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */ -#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */ -#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */ -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */ -#else -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ -/** - * @} - */ - -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -/** @defgroup UART_Stop_Mode_Enable UARTEx Advanced Feature Stop Mode Enable - * @{ - */ -#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000) /*!< UART stop mode disable */ -#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM) /*!< UART stop mode enable */ -/** - * @} - */ - -/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection - * @{ - */ -#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x00000000) /*!< UART wake-up on address */ -#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1) /*!< UART wake-up on start bit */ -#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS) /*!< UART wake-up on receive data register not empty */ -/** - * @} - */ -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ - -/** - * @} - */ - -/* Exported macros ------------------------------------------------------------*/ -/** @defgroup UARTEx_Exported_Macros UARTEx Exported Macros - * @{ - */ - -/** @brief Flush the UART Data registers. - * @param __HANDLE__: specifies the UART Handle. - * @retval None - */ -#if !defined(STM32F030x6) && !defined(STM32F030x8) -#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ - SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ - } while(0) -#else -#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ - } while(0) -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup UARTEx_Private_Macros UARTEx Private Macros - * @{ - */ - -/** @brief Report the UART clock source. - * @param __HANDLE__: specifies the UART Handle. - * @param __CLOCKSOURCE__: output variable. - * @retval UART clocking source, written in __CLOCKSOURCE__. - */ - - -#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } while(0) -#elif defined (STM32F030x8) || defined (STM32F070x6) || \ - defined (STM32F042x6) || defined (STM32F048xx) || \ - defined (STM32F051x8) || defined (STM32F058xx) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - if((__HANDLE__)->Instance == USART1) \ - { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART2) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - } \ - } while(0) -#elif defined(STM32F070xB) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - if((__HANDLE__)->Instance == USART1) \ - { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART2) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else if((__HANDLE__)->Instance == USART3) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else if((__HANDLE__)->Instance == USART4) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - } \ - } while(0) -#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - if((__HANDLE__)->Instance == USART1) \ - { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART2) \ - { \ - switch(__HAL_RCC_GET_USART2_SOURCE()) \ - { \ - case RCC_USART2CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART2CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART2CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART2CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART3) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else if((__HANDLE__)->Instance == USART4) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - } \ - } while(0) -#elif defined(STM32F091xC) || defined (STM32F098xx) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - if((__HANDLE__)->Instance == USART1) \ - { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART2) \ - { \ - switch(__HAL_RCC_GET_USART2_SOURCE()) \ - { \ - case RCC_USART2CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART2CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART2CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART2CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART3) \ - { \ - switch(__HAL_RCC_GET_USART3_SOURCE()) \ - { \ - case RCC_USART3CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART3CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART3CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART3CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART4) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else if((__HANDLE__)->Instance == USART5) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else if((__HANDLE__)->Instance == USART6) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else if((__HANDLE__)->Instance == USART7) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else if((__HANDLE__)->Instance == USART8) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - } \ - } while(0) -#elif defined(STM32F030xC) -#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ - do { \ - if((__HANDLE__)->Instance == USART1) \ - { \ - switch(__HAL_RCC_GET_USART1_SOURCE()) \ - { \ - case RCC_USART1CLKSOURCE_PCLK1: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - break; \ - case RCC_USART1CLKSOURCE_HSI: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ - break; \ - case RCC_USART1CLKSOURCE_SYSCLK: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ - break; \ - case RCC_USART1CLKSOURCE_LSE: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ - break; \ - default: \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - break; \ - } \ - } \ - else if((__HANDLE__)->Instance == USART2) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else if((__HANDLE__)->Instance == USART3) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else if((__HANDLE__)->Instance == USART4) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else if((__HANDLE__)->Instance == USART5) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else if((__HANDLE__)->Instance == USART6) \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ - } \ - else \ - { \ - (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ - } \ - } while(0) - -#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */ - - -/** @brief Compute the UART mask to apply to retrieve the received data - * according to the word length and to the parity bits activation. - * @note If PCE = 1, the parity bit is not included in the data extracted - * by the reception API(). - * This masking operation is not carried out in the case of - * DMA transfers. - * @param __HANDLE__: specifies the UART Handle. - * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. - */ -#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ - defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ - defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) -#define UART_MASK_COMPUTATION(__HANDLE__) \ - do { \ - if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x01FF ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x00FF ; \ - } \ - } \ - else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x00FF ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x007F ; \ - } \ - } \ - else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x007F ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x003F ; \ - } \ - } \ -} while(0) -#else -#define UART_MASK_COMPUTATION(__HANDLE__) \ - do { \ - if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x01FF ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x00FF ; \ - } \ - } \ - else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ - { \ - if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ - { \ - (__HANDLE__)->Mask = 0x00FF ; \ - } \ - else \ - { \ - (__HANDLE__)->Mask = 0x007F ; \ - } \ - } \ -} while(0) -#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ - defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ - defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ - -/** - * @brief Ensure that UART frame length is valid. - * @param __LENGTH__: UART frame length. - * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) - */ -#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ - defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ - defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) -#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ - ((__LENGTH__) == UART_WORDLENGTH_8B) || \ - ((__LENGTH__) == UART_WORDLENGTH_9B)) -#else -#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_8B) || \ - ((__LENGTH__) == UART_WORDLENGTH_9B)) -#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ - defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ - defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ - -/** - * @brief Ensure that UART auto Baud rate detection mode is valid. - * @param __MODE__: UART auto Baud rate detection mode. - * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) - */ -#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ - defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ - defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) -#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ - ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ - ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ - ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) -#else -#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ - ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE)) -#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ - defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ - defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ - - -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -/** - * @brief Ensure that UART LIN state is valid. - * @param __LIN__: UART LIN state. - * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) - */ -#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ - ((__LIN__) == UART_LIN_ENABLE)) - -/** - * @brief Ensure that UART LIN break detection length is valid. - * @param __LENGTH__: UART LIN break detection length. - * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) - */ -#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ - ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ - -/** - * @brief Ensure that UART request parameter is valid. - * @param __PARAM__: UART request parameter. - * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) - */ -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ - ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ - ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ - ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ - ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) -#else -#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ - ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ - ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ - ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST)) -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ - -#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) -/** - * @brief Ensure that UART stop mode state is valid. - * @param __STOPMODE__: UART stop mode state. - * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) - */ -#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ - ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) - -/** - * @brief Ensure that UART wake-up selection is valid. - * @param __WAKE__: UART wake-up selection. - * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) - */ -#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ - ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ - ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup UARTEx_Exported_Functions - * @{ - */ - -/** @addtogroup UARTEx_Exported_Functions_Group1 - * @brief Extended Initialization and Configuration Functions - * @{ - */ -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime); -#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) -HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */ -/** - * @} - */ - -/** @addtogroup UARTEx_Exported_Functions_Group2 - * @brief Extended UART Interrupt handling function - * @{ - */ - -/* IO operation functions ***************************************************/ -#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) -void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */ -/** - * @} - */ - -/** @addtogroup UARTEx_Exported_Functions_Group3 - * @brief Extended Peripheral Control functions - * @{ - */ - -/* Peripheral Control functions **********************************************/ -HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); -#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6) && !defined(STM32F030xC) -HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); -HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); -#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */ -/** - * @} - */ -/* Peripheral State functions ************************************************/ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F0xx_HAL_UART_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ - +/** + ****************************************************************************** + * @file stm32f0xx_hal_uart_ex.h + * @author MCD Application Team + * @version V1.4.0 + * @date 27-May-2016 + * @brief Header file of UART HAL Extension module. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F0xx_HAL_UART_EX_H +#define __STM32F0xx_HAL_UART_EX_H + +#ifdef __cplusplus + extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f0xx_hal_def.h" + +/** @addtogroup STM32F0xx_HAL_Driver + * @{ + */ + +/** @addtogroup UARTEx + * @{ + */ + +/* Exported types ------------------------------------------------------------*/ +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +/** @defgroup UARTEx_Exported_Types UARTEx Exported Types + * @{ + */ + +/** + * @brief UART wake up from stop mode parameters + */ +typedef struct +{ + uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF). + This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. + If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must + be filled up. */ + + uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. + This parameter can be a value of @ref UART_WakeUp_Address_Length */ + + uint8_t Address; /*!< UART/USART node address (7-bit long max) */ +} UART_WakeUpTypeDef; + +/** + * @} + */ +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants + * @{ + */ + +/** @defgroup UARTEx_Word_Length UARTEx Word Length + * @{ + */ +#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ + defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) +#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1) +#define UART_WORDLENGTH_8B ((uint32_t)0x00000000) +#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0) +#else +#define UART_WORDLENGTH_8B ((uint32_t)0x00000000) +#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ + defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ +/** + * @} + */ + +/** @defgroup UARTEx_AutoBaud_Rate_Mode UARTEx Advanced Feature AutoBaud Rate Mode + * @{ + */ +#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ + defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x00000000) /*!< Auto Baud rate detection on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) /*!< Auto Baud rate detection on falling edge */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1) /*!< Auto Baud rate detection on 0x7F frame detection */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE) /*!< Auto Baud rate detection on 0x55 frame detection */ +#else +#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x00000000) /*!< Auto Baud rate detection on start bit */ +#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0) /*!< Auto Baud rate detection on falling edge */ +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ + defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ +/** + * @} + */ + +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +/** @defgroup UARTEx_LIN UARTEx Local Interconnection Network mode + * @{ + */ +#define UART_LIN_DISABLE ((uint32_t)0x00000000) /*!< Local Interconnect Network disable */ +#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN) /*!< Local Interconnect Network enable */ +/** + * @} + */ + +/** @defgroup UARTEx_LIN_Break_Detection UARTEx LIN Break Detection + * @{ + */ +#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) /*!< LIN 10-bit break detection length */ +#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL) /*!< LIN 11-bit break detection length */ +/** + * @} + */ +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ + +/** @defgroup UART_Flags UARTEx Status Flags + * Elements values convention: 0xXXXX + * - 0xXXXX : Flag mask in the ISR register + * @{ + */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +#define UART_FLAG_REACK ((uint32_t)0x00400000) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ +#define UART_FLAG_TEACK ((uint32_t)0x00200000) +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +#define UART_FLAG_WUF ((uint32_t)0x00100000) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ +#define UART_FLAG_RWU ((uint32_t)0x00080000) +#define UART_FLAG_SBKF ((uint32_t)0x00040000) +#define UART_FLAG_CMF ((uint32_t)0x00020000) +#define UART_FLAG_BUSY ((uint32_t)0x00010000) +#define UART_FLAG_ABRF ((uint32_t)0x00008000) +#define UART_FLAG_ABRE ((uint32_t)0x00004000) +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +#define UART_FLAG_EOBF ((uint32_t)0x00001000) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ +#define UART_FLAG_RTOF ((uint32_t)0x00000800) +#define UART_FLAG_CTS ((uint32_t)0x00000400) +#define UART_FLAG_CTSIF ((uint32_t)0x00000200) +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +#define UART_FLAG_LBDF ((uint32_t)0x00000100) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ +#define UART_FLAG_TXE ((uint32_t)0x00000080) +#define UART_FLAG_TC ((uint32_t)0x00000040) +#define UART_FLAG_RXNE ((uint32_t)0x00000020) +#define UART_FLAG_IDLE ((uint32_t)0x00000010) +#define UART_FLAG_ORE ((uint32_t)0x00000008) +#define UART_FLAG_NE ((uint32_t)0x00000004) +#define UART_FLAG_FE ((uint32_t)0x00000002) +#define UART_FLAG_PE ((uint32_t)0x00000001) +/** + * @} + */ + +/** @defgroup UART_Interrupt_definition UARTEx Interrupts Definition + * Elements values convention: 0000ZZZZZ0XXYYYYYb + * - YYYYY : Interrupt source position in the XX register (5bits) + * - XX : Interrupt source register (2bits) + * - 01: CR1 register + * - 10: CR2 register + * - 11: CR3 register + * - ZZZZZ : Flag position in the ISR register(5bits) + * @{ + */ +#define UART_IT_PE ((uint16_t)0x0028) +#define UART_IT_TXE ((uint16_t)0x0727) +#define UART_IT_TC ((uint16_t)0x0626) +#define UART_IT_RXNE ((uint16_t)0x0525) +#define UART_IT_IDLE ((uint16_t)0x0424) +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +#define UART_IT_LBD ((uint16_t)0x0846) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ +#define UART_IT_CTS ((uint16_t)0x096A) +#define UART_IT_CM ((uint16_t)0x112E) +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +#define UART_IT_WUF ((uint16_t)0x1476) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ +/** + * @} + */ + + +/** @defgroup UART_IT_CLEAR_Flags UARTEx Interruption Clear Flags + * @{ + */ +#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */ +#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */ +#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */ +#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */ +#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */ +#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag (not available on F030xx devices)*/ +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ +#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */ +#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */ +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ +#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */ +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ +/** + * @} + */ + +/** @defgroup UART_Request_Parameters UARTEx Request Parameters + * @{ + */ +#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */ +#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */ +#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */ +#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */ +#else +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ +/** + * @} + */ + +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +/** @defgroup UART_Stop_Mode_Enable UARTEx Advanced Feature Stop Mode Enable + * @{ + */ +#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000) /*!< UART stop mode disable */ +#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM) /*!< UART stop mode enable */ +/** + * @} + */ + +/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection + * @{ + */ +#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x00000000) /*!< UART wake-up on address */ +#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1) /*!< UART wake-up on start bit */ +#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS) /*!< UART wake-up on receive data register not empty */ +/** + * @} + */ +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ + +/** + * @} + */ + +/* Exported macros ------------------------------------------------------------*/ +/** @defgroup UARTEx_Exported_Macros UARTEx Exported Macros + * @{ + */ + +/** @brief Flush the UART Data registers. + * @param __HANDLE__: specifies the UART Handle. + * @retval None + */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_TXDATA_FLUSH_REQUEST); \ + } while(0) +#else +#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) \ + do{ \ + SET_BIT((__HANDLE__)->Instance->RQR, UART_RXDATA_FLUSH_REQUEST); \ + } while(0) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */ + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup UARTEx_Private_Macros UARTEx Private Macros + * @{ + */ + +/** @brief Report the UART clock source. + * @param __HANDLE__: specifies the UART Handle. + * @param __CLOCKSOURCE__: output variable. + * @retval UART clocking source, written in __CLOCKSOURCE__. + */ + + +#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } while(0) +#elif defined (STM32F030x8) || defined (STM32F070x6) || \ + defined (STM32F042x6) || defined (STM32F048xx) || \ + defined (STM32F051x8) || defined (STM32F058xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) +#elif defined(STM32F070xB) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) +#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) +#elif defined(STM32F091xC) || defined (STM32F098xx) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + switch(__HAL_RCC_GET_USART2_SOURCE()) \ + { \ + case RCC_USART2CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART2CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART2CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART2CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + switch(__HAL_RCC_GET_USART3_SOURCE()) \ + { \ + case RCC_USART3CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART3CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART3CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART3CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART5) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART6) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART7) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART8) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) +#elif defined(STM32F030xC) +#define UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \ + do { \ + if((__HANDLE__)->Instance == USART1) \ + { \ + switch(__HAL_RCC_GET_USART1_SOURCE()) \ + { \ + case RCC_USART1CLKSOURCE_PCLK1: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + break; \ + case RCC_USART1CLKSOURCE_HSI: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \ + break; \ + case RCC_USART1CLKSOURCE_SYSCLK: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \ + break; \ + case RCC_USART1CLKSOURCE_LSE: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \ + break; \ + default: \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + break; \ + } \ + } \ + else if((__HANDLE__)->Instance == USART2) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART3) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART4) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART5) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else if((__HANDLE__)->Instance == USART6) \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \ + } \ + else \ + { \ + (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \ + } \ + } while(0) + +#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */ + + +/** @brief Compute the UART mask to apply to retrieve the received data + * according to the word length and to the parity bits activation. + * @note If PCE = 1, the parity bit is not included in the data extracted + * by the reception API(). + * This masking operation is not carried out in the case of + * DMA transfers. + * @param __HANDLE__: specifies the UART Handle. + * @retval None, the mask to apply to UART RDR register is stored in (__HANDLE__)->Mask field. + */ +#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ + defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) +#define UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FF ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FF ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FF ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007F ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x007F ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x003F ; \ + } \ + } \ +} while(0) +#else +#define UART_MASK_COMPUTATION(__HANDLE__) \ + do { \ + if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x01FF ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x00FF ; \ + } \ + } \ + else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \ + { \ + if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \ + { \ + (__HANDLE__)->Mask = 0x00FF ; \ + } \ + else \ + { \ + (__HANDLE__)->Mask = 0x007F ; \ + } \ + } \ +} while(0) +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ + defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ + +/** + * @brief Ensure that UART frame length is valid. + * @param __LENGTH__: UART frame length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ + defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_7B) || \ + ((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) +#else +#define IS_UART_WORD_LENGTH(__LENGTH__) (((__LENGTH__) == UART_WORDLENGTH_8B) || \ + ((__LENGTH__) == UART_WORDLENGTH_9B)) +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ + defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ + +/** + * @brief Ensure that UART auto Baud rate detection mode is valid. + * @param __MODE__: UART auto Baud rate detection mode. + * @retval SET (__MODE__ is valid) or RESET (__MODE__ is invalid) + */ +#if defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ + defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME)) +#else +#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(__MODE__) (((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \ + ((__MODE__) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE)) +#endif /* defined (STM32F042x6) || defined (STM32F048xx) || defined (STM32F070x6) || \ + defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || defined (STM32F070xB) || \ + defined (STM32F091xC) || defined (STM32F098xx) || defined (STM32F030xC) */ + + +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +/** + * @brief Ensure that UART LIN state is valid. + * @param __LIN__: UART LIN state. + * @retval SET (__LIN__ is valid) or RESET (__LIN__ is invalid) + */ +#define IS_UART_LIN(__LIN__) (((__LIN__) == UART_LIN_DISABLE) || \ + ((__LIN__) == UART_LIN_ENABLE)) + +/** + * @brief Ensure that UART LIN break detection length is valid. + * @param __LENGTH__: UART LIN break detection length. + * @retval SET (__LENGTH__ is valid) or RESET (__LENGTH__ is invalid) + */ +#define IS_UART_LIN_BREAK_DETECT_LENGTH(__LENGTH__) (((__LENGTH__) == UART_LINBREAKDETECTLENGTH_10B) || \ + ((__LENGTH__) == UART_LINBREAKDETECTLENGTH_11B)) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ + +/** + * @brief Ensure that UART request parameter is valid. + * @param __PARAM__: UART request parameter. + * @retval SET (__PARAM__ is valid) or RESET (__PARAM__ is invalid) + */ +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST) || \ + ((__PARAM__) == UART_TXDATA_FLUSH_REQUEST)) +#else +#define IS_UART_REQUEST_PARAMETER(__PARAM__) (((__PARAM__) == UART_AUTOBAUD_REQUEST) || \ + ((__PARAM__) == UART_SENDBREAK_REQUEST) || \ + ((__PARAM__) == UART_MUTE_MODE_REQUEST) || \ + ((__PARAM__) == UART_RXDATA_FLUSH_REQUEST)) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ + +#if !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) +/** + * @brief Ensure that UART stop mode state is valid. + * @param __STOPMODE__: UART stop mode state. + * @retval SET (__STOPMODE__ is valid) or RESET (__STOPMODE__ is invalid) + */ +#define IS_UART_ADVFEATURE_STOPMODE(__STOPMODE__) (((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_DISABLE) || \ + ((__STOPMODE__) == UART_ADVFEATURE_STOPMODE_ENABLE)) + +/** + * @brief Ensure that UART wake-up selection is valid. + * @param __WAKE__: UART wake-up selection. + * @retval SET (__WAKE__ is valid) or RESET (__WAKE__ is invalid) + */ +#define IS_UART_WAKEUP_SELECTION(__WAKE__) (((__WAKE__) == UART_WAKEUP_ON_ADDRESS) || \ + ((__WAKE__) == UART_WAKEUP_ON_STARTBIT) || \ + ((__WAKE__) == UART_WAKEUP_ON_READDATA_NONEMPTY)) +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) && !defined(STM32F070x6) && !defined(STM32F070xB) && !defined(STM32F030xC) */ + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @addtogroup UARTEx_Exported_Functions + * @{ + */ + +/** @addtogroup UARTEx_Exported_Functions_Group1 + * @brief Extended Initialization and Configuration Functions + * @{ + */ +/* Initialization and de-initialization functions ****************************/ +HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t Polarity, uint32_t AssertionTime, uint32_t DeassertionTime); +#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) +HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */ +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group2 + * @brief Extended UART Interrupt handling function + * @{ + */ + +/* IO operation functions ***************************************************/ +#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) +void HAL_UARTEx_WakeupCallback(UART_HandleTypeDef *huart); +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */ +/** + * @} + */ + +/** @addtogroup UARTEx_Exported_Functions_Group3 + * @brief Extended Peripheral Control functions + * @{ + */ + +/* Peripheral Control functions **********************************************/ +HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength); +#if !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6) && !defined(STM32F030xC) +HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection); +HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart); +HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); +#endif /* !defined(STM32F030x6) && !defined(STM32F030x8)&& !defined(STM32F070xB)&& !defined(STM32F070x6)&& !defined(STM32F030xC) */ +/** + * @} + */ +/* Peripheral State functions ************************************************/ + +/** + * @} + */ + +/* Private functions ---------------------------------------------------------*/ + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F0xx_HAL_UART_EX_H */ + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ +