Diff: targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_cortex.c

Revision:

144:ef7eb2e8f9f7

Parent:

0:9b334a45a8ff

--- a/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_cortex.c	Tue Aug 02 14:07:36 2016 +0000
+++ b/targets/cmsis/TARGET_STM/TARGET_STM32F0/stm32f0xx_hal_cortex.c	Fri Sep 02 15:07:44 2016 +0100
@@ -1,359 +1,359 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_hal_cortex.c
-  * @author  MCD Application Team
-  * @version V1.3.0
-  * @date    26-June-2015
-  * @brief   CORTEX HAL module driver.
-  *          This file provides firmware functions to manage the following
-  *          functionalities of the CORTEX:
-  *           + Initialization and de-initialization functions
-  *           + Peripheral Control functions 
-  *
-  *  @verbatim
-  ==============================================================================
-                        ##### How to use this driver #####
-  ==============================================================================
-
-    [..]  
-    *** How to configure Interrupts using CORTEX HAL driver ***
-    ===========================================================
-    [..]
-    This section provides functions allowing to configure the NVIC interrupts (IRQ).
-    The Cortex-M0 exceptions are managed by CMSIS functions.
-      (#) Enable and Configure the priority of the selected IRQ Channels. 
-             The priority can be 0..3. 
-
-        -@- Lower priority values gives higher priority.
-        -@- Priority Order:
-            (#@) Lowest priority.
-            (#@) Lowest hardware priority (IRQn position).  
-
-      (#)  Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority()
-
-      (#)  Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ()
-      
-      -@-  Negative value of IRQn_Type are not allowed.
-
-
-    [..]
-    *** How to configure Systick using CORTEX HAL driver ***
-    ========================================================
-    [..]
-    Setup SysTick Timer for time base. 
-           
-   (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which
-       is a CMSIS function that:
-        (++) Configures the SysTick Reload register with value passed as function parameter.
-        (++) Configures the SysTick IRQ priority to the lowest value (0x03).
-        (++) Resets the SysTick Counter register.
-        (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
-        (++) Enables the SysTick Interrupt.
-        (++) Starts the SysTick Counter.
-    
-   (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
-       __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
-       HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
-       inside the stm32f0xx_hal_cortex.h file.
-
-   (+) You can change the SysTick IRQ priority by calling the
-       HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function 
-       call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
-
-   (+) To adjust the SysTick time base, use the following formula:
-
-       Reload Value = SysTick Counter Clock (Hz) x  Desired Time base (s)
-       (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
-       (++) Reload Value should not exceed 0xFFFFFF
-
-  @endverbatim
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************  
-  */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
-  * @{
-  */
-
-/** @defgroup CORTEX CORTEX
-  * @brief CORTEX CORTEX HAL module driver
-  * @{
-  */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Exported functions ---------------------------------------------------------*/
-
-/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
-  * @{
-  */
-
-
-/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions 
- *  @brief    Initialization and Configuration functions
- *
-@verbatim
-  ==============================================================================
-              ##### Initialization and de-initialization functions #####
-  ==============================================================================
-    [..]
-      This section provides the CORTEX HAL driver functions allowing to configure Interrupts
-      Systick functionalities 
-
-@endverbatim
-  * @{
-  */
-
-/**
-  * @brief  Sets the priority of an interrupt.
-  * @param  IRQn: External interrupt number .
-  *         This parameter can be an enumerator of IRQn_Type enumeration
-  *         (For the complete STM32 Devices IRQ Channels list, please refer to stm32l0xx.h file)
-  * @param  PreemptPriority: The preemption priority for the IRQn channel.
-  *         This parameter can be a value between 0 and 3.
-  *         A lower priority value indicates a higher priority
-  * @param  SubPriority: the subpriority level for the IRQ channel.
-  *         with stm32f0xx devices, this parameter is a dummy value and it is ignored, because 
-  *         no subpriority supported in Cortex M0 based products.   
-  * @retval None
-  */
-void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
-{ 
-  /* Check the parameters */
-  assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
-  NVIC_SetPriority(IRQn,PreemptPriority);
-}
-
-/**
-  * @brief  Enables a device specific interrupt in the NVIC interrupt controller.
-  * @note   To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
-  *         function should be called before. 
-  * @param  IRQn External interrupt number.
-  *         This parameter can be an enumerator of IRQn_Type enumeration
-  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
-  * @retval None
-  */
-void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
-{
-  /* Check the parameters */
-  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-  
-  /* Enable interrupt */
-  NVIC_EnableIRQ(IRQn);
-}
-
-/**
-  * @brief  Disables a device specific interrupt in the NVIC interrupt controller.
-  * @param  IRQn External interrupt number.
-  *         This parameter can be an enumerator of IRQn_Type enumeration
-  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
-  * @retval None
-  */
-void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
-{
-  /* Check the parameters */
-  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-  
-  /* Disable interrupt */
-  NVIC_DisableIRQ(IRQn);
-}
-
-/**
-  * @brief  Initiates a system reset request to reset the MCU.
-  * @retval None
-  */
-void HAL_NVIC_SystemReset(void)
-{
-  /* System Reset */
-  NVIC_SystemReset();
-}
-
-/**
-  * @brief  Initializes the System Timer and its interrupt, and starts the System Tick Timer.
-  *         Counter is in free running mode to generate periodic interrupts.
-  * @param  TicksNumb: Specifies the ticks Number of ticks between two interrupts.
-  * @retval status:  - 0  Function succeeded.
-  *                  - 1  Function failed.
-  */
-uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
-{
-   return SysTick_Config(TicksNumb);
-}
-/**
-  * @}
-  */
-
-/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions 
- *  @brief   Cortex control functions
- *
-@verbatim
-  ==============================================================================
-                      ##### Peripheral Control functions #####
-  ==============================================================================
-    [..]
-      This subsection provides a set of functions allowing to control the CORTEX
-      (NVIC, SYSTICK) functionalities.
-
-
-@endverbatim
-  * @{
-  */
-
-
-/**
-  * @brief  Gets the priority of an interrupt.
-  * @param  IRQn: External interrupt number.
-  *         This parameter can be an enumerator of IRQn_Type enumeration
-  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
-  * @retval None
-  */
-uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn)
-{
-  /* Get priority for Cortex-M system or device specific interrupts */
-  return NVIC_GetPriority(IRQn);
-}
-
-/**
-  * @brief  Sets Pending bit of an external interrupt.
-  * @param  IRQn External interrupt number
-  *         This parameter can be an enumerator of IRQn_Type enumeration
-  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
-  * @retval None
-  */
-void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
-  /* Check the parameters */
-  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-  
-  /* Set interrupt pending */
-  NVIC_SetPendingIRQ(IRQn);
-}
-
-/**
-  * @brief  Gets Pending Interrupt (reads the pending register in the NVIC
-  *         and returns the pending bit for the specified interrupt).
-  * @param  IRQn External interrupt number.
-  *         This parameter can be an enumerator of IRQn_Type enumeration
-  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
-  * @retval status: - 0  Interrupt status is not pending.
-  *                 - 1  Interrupt status is pending.
-  */
-uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
-  /* Check the parameters */
-  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-  
-  /* Return 1 if pending else 0 */
-  return NVIC_GetPendingIRQ(IRQn);
-}
-
-/**
-  * @brief  Clears the pending bit of an external interrupt.
-  * @param  IRQn External interrupt number.
-  *         This parameter can be an enumerator of IRQn_Type enumeration
-  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
-  * @retval None
-  */
-void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
-  /* Check the parameters */
-  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-  
-  /* Clear pending interrupt */
-  NVIC_ClearPendingIRQ(IRQn);
-}
-
-/**
-  * @brief  Configures the SysTick clock source.
-  * @param  CLKSource: specifies the SysTick clock source.
-  *         This parameter can be one of the following values:
-  *             @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
-  *             @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
-  * @retval None
-  */
-void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
-{
-  /* Check the parameters */
-  assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
-  if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
-  {
-    SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
-  }
-  else
-  {
-    SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
-  }
-}
-
-/**
-  * @brief  This function handles SYSTICK interrupt request.
-  * @retval None
-  */
-void HAL_SYSTICK_IRQHandler(void)
-{
-  HAL_SYSTICK_Callback();
-}
-
-/**
-  * @brief  SYSTICK callback.
-  * @retval None
-  */
-__weak void HAL_SYSTICK_Callback(void)
-{
-  /* NOTE : This function Should not be modified, when the callback is needed,
-            the HAL_SYSTICK_Callback could be implemented in the user file
-   */
-}
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+/**
+  ******************************************************************************
+  * @file    stm32f0xx_hal_cortex.c
+  * @author  MCD Application Team
+  * @version V1.4.0
+  * @date    27-May-2016
+  * @brief   CORTEX HAL module driver.
+  *          This file provides firmware functions to manage the following
+  *          functionalities of the CORTEX:
+  *           + Initialization and de-initialization functions
+  *           + Peripheral Control functions 
+  *
+  *  @verbatim
+  ==============================================================================
+                        ##### How to use this driver #####
+  ==============================================================================
+
+    [..]  
+    *** How to configure Interrupts using CORTEX HAL driver ***
+    ===========================================================
+    [..]
+    This section provides functions allowing to configure the NVIC interrupts (IRQ).
+    The Cortex-M0 exceptions are managed by CMSIS functions.
+      (#) Enable and Configure the priority of the selected IRQ Channels. 
+             The priority can be 0..3. 
+
+        -@- Lower priority values gives higher priority.
+        -@- Priority Order:
+            (#@) Lowest priority.
+            (#@) Lowest hardware priority (IRQn position).  
+
+      (#)  Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority()
+
+      (#)  Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ()
+      
+      -@-  Negative value of IRQn_Type are not allowed.
+
+
+    [..]
+    *** How to configure Systick using CORTEX HAL driver ***
+    ========================================================
+    [..]
+    Setup SysTick Timer for time base. 
+           
+   (+) The HAL_SYSTICK_Config()function calls the SysTick_Config() function which
+       is a CMSIS function that:
+        (++) Configures the SysTick Reload register with value passed as function parameter.
+        (++) Configures the SysTick IRQ priority to the lowest value (0x03).
+        (++) Resets the SysTick Counter register.
+        (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
+        (++) Enables the SysTick Interrupt.
+        (++) Starts the SysTick Counter.
+    
+   (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
+       HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
+       HAL_SYSTICK_Config() function call. The HAL_SYSTICK_CLKSourceConfig() macro is defined
+       inside the stm32f0xx_hal_cortex.h file.
+
+   (+) You can change the SysTick IRQ priority by calling the
+       HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function 
+       call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
+
+   (+) To adjust the SysTick time base, use the following formula:
+
+       Reload Value = SysTick Counter Clock (Hz) x  Desired Time base (s)
+       (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
+       (++) Reload Value should not exceed 0xFFFFFF
+
+  @endverbatim
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2016 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************  
+  */
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+  * @{
+  */
+
+/** @defgroup CORTEX CORTEX
+  * @brief CORTEX CORTEX HAL module driver
+  * @{
+  */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Exported functions ---------------------------------------------------------*/
+
+/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
+  * @{
+  */
+
+
+/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions 
+ *  @brief    Initialization and Configuration functions
+ *
+@verbatim
+  ==============================================================================
+              ##### Initialization and de-initialization functions #####
+  ==============================================================================
+    [..]
+      This section provides the CORTEX HAL driver functions allowing to configure Interrupts
+      Systick functionalities 
+
+@endverbatim
+  * @{
+  */
+
+/**
+  * @brief  Sets the priority of an interrupt.
+  * @param  IRQn: External interrupt number .
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to stm32l0xx.h file)
+  * @param  PreemptPriority: The preemption priority for the IRQn channel.
+  *         This parameter can be a value between 0 and 3.
+  *         A lower priority value indicates a higher priority
+  * @param  SubPriority: the subpriority level for the IRQ channel.
+  *         with stm32f0xx devices, this parameter is a dummy value and it is ignored, because 
+  *         no subpriority supported in Cortex M0 based products.   
+  * @retval None
+  */
+void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
+{ 
+  /* Check the parameters */
+  assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
+  NVIC_SetPriority(IRQn,PreemptPriority);
+}
+
+/**
+  * @brief  Enables a device specific interrupt in the NVIC interrupt controller.
+  * @note   To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
+  *         function should be called before. 
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Enable interrupt */
+  NVIC_EnableIRQ(IRQn);
+}
+
+/**
+  * @brief  Disables a device specific interrupt in the NVIC interrupt controller.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Disable interrupt */
+  NVIC_DisableIRQ(IRQn);
+}
+
+/**
+  * @brief  Initiates a system reset request to reset the MCU.
+  * @retval None
+  */
+void HAL_NVIC_SystemReset(void)
+{
+  /* System Reset */
+  NVIC_SystemReset();
+}
+
+/**
+  * @brief  Initializes the System Timer and its interrupt, and starts the System Tick Timer.
+  *         Counter is in free running mode to generate periodic interrupts.
+  * @param  TicksNumb: Specifies the ticks Number of ticks between two interrupts.
+  * @retval status:  - 0  Function succeeded.
+  *                  - 1  Function failed.
+  */
+uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
+{
+   return SysTick_Config(TicksNumb);
+}
+/**
+  * @}
+  */
+
+/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions 
+ *  @brief   Cortex control functions
+ *
+@verbatim
+  ==============================================================================
+                      ##### Peripheral Control functions #####
+  ==============================================================================
+    [..]
+      This subsection provides a set of functions allowing to control the CORTEX
+      (NVIC, SYSTICK) functionalities.
+
+
+@endverbatim
+  * @{
+  */
+
+
+/**
+  * @brief  Gets the priority of an interrupt.
+  * @param  IRQn: External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+  * @retval None
+  */
+uint32_t HAL_NVIC_GetPriority(IRQn_Type IRQn)
+{
+  /* Get priority for Cortex-M system or device specific interrupts */
+  return NVIC_GetPriority(IRQn);
+}
+
+/**
+  * @brief  Sets Pending bit of an external interrupt.
+  * @param  IRQn External interrupt number
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Set interrupt pending */
+  NVIC_SetPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Gets Pending Interrupt (reads the pending register in the NVIC
+  *         and returns the pending bit for the specified interrupt).
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+  * @retval status: - 0  Interrupt status is not pending.
+  *                 - 1  Interrupt status is pending.
+  */
+uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Return 1 if pending else 0 */
+  return NVIC_GetPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Clears the pending bit of an external interrupt.
+  * @param  IRQn External interrupt number.
+  *         This parameter can be an enumerator of IRQn_Type enumeration
+  *         (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f0xxxx.h))
+  * @retval None
+  */
+void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
+{
+  /* Check the parameters */
+  assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
+  
+  /* Clear pending interrupt */
+  NVIC_ClearPendingIRQ(IRQn);
+}
+
+/**
+  * @brief  Configures the SysTick clock source.
+  * @param  CLKSource: specifies the SysTick clock source.
+  *         This parameter can be one of the following values:
+  *             @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
+  *             @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
+  * @retval None
+  */
+void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
+{
+  /* Check the parameters */
+  assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
+  if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
+  {
+    SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
+  }
+  else
+  {
+    SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
+  }
+}
+
+/**
+  * @brief  This function handles SYSTICK interrupt request.
+  * @retval None
+  */
+void HAL_SYSTICK_IRQHandler(void)
+{
+  HAL_SYSTICK_Callback();
+}
+
+/**
+  * @brief  SYSTICK callback.
+  * @retval None
+  */
+__weak void HAL_SYSTICK_Callback(void)
+{
+  /* NOTE : This function Should not be modified, when the callback is needed,
+            the HAL_SYSTICK_Callback could be implemented in the user file
+   */
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/