mbed library sources. Supersedes mbed-src.

Dependents:   Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more

Revision:
167:e84263d55307
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F2/device/stm32f2xx_ll_exti.c	Wed Jun 21 17:46:44 2017 +0100
@@ -0,0 +1,232 @@
+/**
+  ******************************************************************************
+  * @file    stm32f2xx_ll_exti.c
+  * @author  MCD Application Team
+  * @version V1.2.1
+  * @date    14-April-2017
+  * @brief   EXTI LL module driver.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+#if defined(USE_FULL_LL_DRIVER)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f2xx_ll_exti.h"
+#ifdef  USE_FULL_ASSERT
+#include "stm32_assert.h"
+#else
+#define assert_param(expr) ((void)0U)
+#endif
+
+/** @addtogroup STM32F2xx_LL_Driver
+  * @{
+  */
+
+#if defined (EXTI)
+
+/** @defgroup EXTI_LL EXTI
+  * @{
+  */
+
+/* Private types -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private constants ---------------------------------------------------------*/
+/* Private macros ------------------------------------------------------------*/
+/** @addtogroup EXTI_LL_Private_Macros
+  * @{
+  */
+
+#define IS_LL_EXTI_LINE_0_31(__VALUE__)              (((__VALUE__) & ~LL_EXTI_LINE_ALL_0_31) == 0x00000000U)
+
+#define IS_LL_EXTI_MODE(__VALUE__)                   (((__VALUE__) == LL_EXTI_MODE_IT)            \
+                                                   || ((__VALUE__) == LL_EXTI_MODE_EVENT)         \
+                                                   || ((__VALUE__) == LL_EXTI_MODE_IT_EVENT))
+
+
+#define IS_LL_EXTI_TRIGGER(__VALUE__)                (((__VALUE__) == LL_EXTI_TRIGGER_NONE)       \
+                                                   || ((__VALUE__) == LL_EXTI_TRIGGER_RISING)     \
+                                                   || ((__VALUE__) == LL_EXTI_TRIGGER_FALLING)    \
+                                                   || ((__VALUE__) == LL_EXTI_TRIGGER_RISING_FALLING))
+
+/**
+  * @}
+  */
+
+/* Private function prototypes -----------------------------------------------*/
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup EXTI_LL_Exported_Functions
+  * @{
+  */
+
+/** @addtogroup EXTI_LL_EF_Init
+  * @{
+  */
+
+/**
+  * @brief  De-initialize the EXTI registers to their default reset values.
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: EXTI registers are de-initialized
+  *          - ERROR: not applicable
+  */
+uint32_t LL_EXTI_DeInit(void)
+{
+  /* Interrupt mask register set to default reset values */
+  LL_EXTI_WriteReg(IMR,   0x00000000U);
+  /* Event mask register set to default reset values */
+  LL_EXTI_WriteReg(EMR,   0x00000000U);
+  /* Rising Trigger selection register set to default reset values */
+  LL_EXTI_WriteReg(RTSR,  0x00000000U);
+  /* Falling Trigger selection register set to default reset values */
+  LL_EXTI_WriteReg(FTSR,  0x00000000U);
+  /* Software interrupt event register set to default reset values */
+  LL_EXTI_WriteReg(SWIER, 0x00000000U);
+  /* Pending register set to default reset values */
+  LL_EXTI_WriteReg(PR,    0x007FFFFFU);
+
+  return SUCCESS;
+}
+
+/**
+  * @brief  Initialize the EXTI registers according to the specified parameters in EXTI_InitStruct.
+  * @param  EXTI_InitStruct pointer to a @ref LL_EXTI_InitTypeDef structure.
+  * @retval An ErrorStatus enumeration value:
+  *          - SUCCESS: EXTI registers are initialized
+  *          - ERROR: not applicable
+  */
+uint32_t LL_EXTI_Init(LL_EXTI_InitTypeDef *EXTI_InitStruct)
+{
+  ErrorStatus status = SUCCESS;
+  /* Check the parameters */
+  assert_param(IS_LL_EXTI_LINE_0_31(EXTI_InitStruct->Line_0_31));
+  assert_param(IS_FUNCTIONAL_STATE(EXTI_InitStruct->LineCommand));
+  assert_param(IS_LL_EXTI_MODE(EXTI_InitStruct->Mode));
+
+  /* ENABLE LineCommand */
+  if (EXTI_InitStruct->LineCommand != DISABLE)
+  {
+    assert_param(IS_LL_EXTI_TRIGGER(EXTI_InitStruct->Trigger));
+
+    /* Configure EXTI Lines in range from 0 to 31 */
+    if (EXTI_InitStruct->Line_0_31 != LL_EXTI_LINE_NONE)
+    {
+      switch (EXTI_InitStruct->Mode)
+      {
+        case LL_EXTI_MODE_IT:
+          /* First Disable Event on provided Lines */
+          LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31);
+          /* Then Enable IT on provided Lines */
+          LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31);
+          break;
+        case LL_EXTI_MODE_EVENT:
+          /* First Disable IT on provided Lines */
+          LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31);
+          /* Then Enable Event on provided Lines */
+          LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31);
+          break;
+        case LL_EXTI_MODE_IT_EVENT:
+          /* Directly Enable IT & Event on provided Lines */
+          LL_EXTI_EnableIT_0_31(EXTI_InitStruct->Line_0_31);
+          LL_EXTI_EnableEvent_0_31(EXTI_InitStruct->Line_0_31);
+          break;
+        default:
+          status = ERROR;
+          break;
+      }
+      if (EXTI_InitStruct->Trigger != LL_EXTI_TRIGGER_NONE)
+      {
+        switch (EXTI_InitStruct->Trigger)
+        {
+          case LL_EXTI_TRIGGER_RISING:
+            /* First Disable Falling Trigger on provided Lines */
+            LL_EXTI_DisableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            /* Then Enable Rising Trigger on provided Lines */
+            LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            break;
+          case LL_EXTI_TRIGGER_FALLING:
+            /* First Disable Rising Trigger on provided Lines */
+            LL_EXTI_DisableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            /* Then Enable Falling Trigger on provided Lines */
+            LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            break;
+          case LL_EXTI_TRIGGER_RISING_FALLING:
+            LL_EXTI_EnableRisingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            LL_EXTI_EnableFallingTrig_0_31(EXTI_InitStruct->Line_0_31);
+            break;
+          default:
+            status = ERROR;
+            break;
+        }
+      }
+    }
+  }
+  /* DISABLE LineCommand */
+  else
+  {
+    /* De-configure EXTI Lines in range from 0 to 31 */
+    LL_EXTI_DisableIT_0_31(EXTI_InitStruct->Line_0_31);
+    LL_EXTI_DisableEvent_0_31(EXTI_InitStruct->Line_0_31);
+  }
+  return status;
+}
+
+/**
+  * @brief  Set each @ref LL_EXTI_InitTypeDef field to default value.
+  * @param  EXTI_InitStruct Pointer to a @ref LL_EXTI_InitTypeDef structure.
+  * @retval None
+  */
+void LL_EXTI_StructInit(LL_EXTI_InitTypeDef *EXTI_InitStruct)
+{
+  EXTI_InitStruct->Line_0_31      = LL_EXTI_LINE_NONE;
+  EXTI_InitStruct->LineCommand    = DISABLE;
+  EXTI_InitStruct->Mode           = LL_EXTI_MODE_IT;
+  EXTI_InitStruct->Trigger        = LL_EXTI_TRIGGER_FALLING;
+}
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+#endif /* defined (EXTI) */
+
+/**
+  * @}
+  */
+
+#endif /* USE_FULL_LL_DRIVER */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/