Diff: targets/TARGET_STM/TARGET_STM32F7/serial_device.c

Revision:

180:96ed750bd169

Parent:

177:d650f5d4c87a

Child:

181:57724642e740

--- a/targets/TARGET_STM/TARGET_STM32F7/serial_device.c	Thu Dec 07 14:01:42 2017 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F7/serial_device.c	Wed Jan 17 15:23:54 2018 +0000
@@ -1,6 +1,6 @@
 /* mbed Microcontroller Library
  *******************************************************************************
- * Copyright (c) 2015, STMicroelectronics
+ * Copyright (c) 2017, STMicroelectronics
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,208 +27,17 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *******************************************************************************
  */
-#include "mbed_assert.h"
-#include "serial_api.h"
-#include "serial_api_hal.h"
 
 #if DEVICE_SERIAL
 
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-#include "mbed_error.h"
+#include "serial_api_hal.h"
 
 #define UART_NUM (8)
-static uint32_t serial_irq_ids[UART_NUM] = {0};
+uint32_t serial_irq_ids[UART_NUM] = {0};
 UART_HandleTypeDef uart_handlers[UART_NUM];
 
 static uart_irq_handler irq_handler;
 
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
-    struct serial_s *obj_s = SERIAL_S(obj);
-  
-    // Determine the UART to use (UART_1, UART_2, ...)
-    UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
-    UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
-    // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
-    obj_s->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
-    MBED_ASSERT(obj_s->uart != (UARTName)NC);
-
-    // Enable USART clock
-    switch (obj_s->uart) {
-        case UART_1:
-            __HAL_RCC_USART1_FORCE_RESET();
-            __HAL_RCC_USART1_RELEASE_RESET();
-            __HAL_RCC_USART1_CLK_ENABLE();
-            obj_s->index = 0;
-            break;
-            
-        case UART_2:
-            __HAL_RCC_USART2_FORCE_RESET();
-            __HAL_RCC_USART2_RELEASE_RESET();
-            __HAL_RCC_USART2_CLK_ENABLE();
-            obj_s->index = 1;
-            break;
-#if defined(USART3_BASE)
-        case UART_3:
-            __HAL_RCC_USART3_FORCE_RESET();
-            __HAL_RCC_USART3_RELEASE_RESET();
-            __HAL_RCC_USART3_CLK_ENABLE();
-            obj_s->index = 2;
-            break;
-#endif
-#if defined(UART4_BASE)
-        case UART_4:
-            __HAL_RCC_UART4_FORCE_RESET();
-            __HAL_RCC_UART4_RELEASE_RESET();
-            __HAL_RCC_UART4_CLK_ENABLE();
-            obj_s->index = 3;
-            break;
-#endif
-#if defined(UART5_BASE)
-        case UART_5:
-            __HAL_RCC_UART5_FORCE_RESET();
-            __HAL_RCC_UART5_RELEASE_RESET();
-            __HAL_RCC_UART5_CLK_ENABLE();
-            obj_s->index = 4;
-            break;
-#endif
-        case UART_6:
-            __HAL_RCC_USART6_FORCE_RESET();
-            __HAL_RCC_USART6_RELEASE_RESET();
-            __HAL_RCC_USART6_CLK_ENABLE();
-            obj_s->index = 5;
-            break;
-#if defined(UART7_BASE)
-        case UART_7:
-            __HAL_RCC_UART7_FORCE_RESET();
-            __HAL_RCC_UART7_RELEASE_RESET();
-            __HAL_RCC_UART7_CLK_ENABLE();
-            obj_s->index = 6;
-            break;
-#endif
-#if defined(UART8_BASE)
-        case UART_8:
-            __HAL_RCC_UART8_FORCE_RESET();
-            __HAL_RCC_UART8_RELEASE_RESET();
-            __HAL_RCC_UART8_CLK_ENABLE();
-            obj_s->index = 7;
-            break;
-#endif
-    }
-
-    // Configure the UART pins
-    pinmap_pinout(tx, PinMap_UART_TX);
-    pinmap_pinout(rx, PinMap_UART_RX);
-    
-    if (tx != NC) {
-        pin_mode(tx, PullUp);
-    }
-    if (rx != NC) {
-        pin_mode(rx, PullUp);
-    }
-
-    // Configure UART
-    obj_s->baudrate = 9600;
-    obj_s->databits = UART_WORDLENGTH_8B;
-    obj_s->stopbits = UART_STOPBITS_1;
-    obj_s->parity   = UART_PARITY_NONE;
-    
-#if DEVICE_SERIAL_FC
-    obj_s->hw_flow_ctl = UART_HWCONTROL_NONE;
-#endif
-
-    obj_s->pin_tx = tx;
-    obj_s->pin_rx = rx;
-
-    init_uart(obj);
-
-    // For stdio management
-    if (obj_s->uart == STDIO_UART) {
-        stdio_uart_inited = 1;
-        memcpy(&stdio_uart, obj, sizeof(serial_t));
-    }
-}
-
-void serial_free(serial_t *obj)
-{
-    struct serial_s *obj_s = SERIAL_S(obj);
-    
-    // Reset UART and disable clock
-    switch (obj_s->uart) {
-        case UART_1:
-            __USART1_FORCE_RESET();
-            __USART1_RELEASE_RESET();
-            __USART1_CLK_DISABLE();
-            break;
-        case UART_2:
-            __USART2_FORCE_RESET();
-            __USART2_RELEASE_RESET();
-            __USART2_CLK_DISABLE();
-            break;
-#if defined(USART3_BASE)
-        case UART_3:
-            __USART3_FORCE_RESET();
-            __USART3_RELEASE_RESET();
-            __USART3_CLK_DISABLE();
-            break;
-#endif
-#if defined(UART4_BASE)
-        case UART_4:
-            __UART4_FORCE_RESET();
-            __UART4_RELEASE_RESET();
-            __UART4_CLK_DISABLE();
-            break;
-#endif
-#if defined(UART5_BASE)
-        case UART_5:
-            __UART5_FORCE_RESET();
-            __UART5_RELEASE_RESET();
-            __UART5_CLK_DISABLE();
-            break;
-#endif
-        case UART_6:
-            __USART6_FORCE_RESET();
-            __USART6_RELEASE_RESET();
-            __USART6_CLK_DISABLE();
-            break;
-#if defined(UART7_BASE)
-        case UART_7:
-            __UART7_FORCE_RESET();
-            __UART7_RELEASE_RESET();
-            __UART7_CLK_DISABLE();
-            break;
-#endif
-#if defined(UART8_BASE)
-        case UART_8:
-            __UART8_FORCE_RESET();
-            __UART8_RELEASE_RESET();
-            __UART8_CLK_DISABLE();
-            break;
-#endif
-    }
-    
-    // Configure GPIOs
-    pin_function(obj_s->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-    pin_function(obj_s->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
-    serial_irq_ids[obj_s->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
-    struct serial_s *obj_s = SERIAL_S(obj);
-  
-    obj_s->baudrate = baudrate;
-    init_uart(obj);
-}
-
 /******************************************************************************
  * INTERRUPTS HANDLING
  ******************************************************************************/
@@ -854,7 +663,7 @@
     }
 }
 
-#endif
+#endif /* DEVICE_SERIAL_ASYNCH */
 
 #if DEVICE_SERIAL_FC
 
@@ -913,6 +722,6 @@
     init_uart(obj);
 }
 
-#endif
+#endif /* DEVICE_SERIAL_FC */
 
-#endif
+#endif /* DEVICE_SERIAL */