Diff: targets/TARGET_STM/TARGET_STM32F3/serial_device.c

Revision:

180:96ed750bd169

Parent:

177:d650f5d4c87a

Child:

181:57724642e740

--- a/targets/TARGET_STM/TARGET_STM32F3/serial_device.c	Thu Dec 07 14:01:42 2017 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F3/serial_device.c	Wed Jan 17 15:23:54 2018 +0000
@@ -1,6 +1,6 @@
 /* mbed Microcontroller Library
  *******************************************************************************
- * Copyright (c) 2014, STMicroelectronics
+ * Copyright (c) 2017, STMicroelectronics
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
@@ -27,179 +27,21 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *******************************************************************************
  */
-#include "mbed_assert.h"
-#include "serial_api.h"
-#include "serial_api_hal.h"
 
 #if DEVICE_SERIAL
 
-#include "cmsis.h"
-#include "pinmap.h"
-#include <string.h>
-#include "PeripheralPins.h"
-#include "mbed_error.h"
-
-#define UART_NUM (5)
-
-static uint32_t serial_irq_ids[UART_NUM] = {0};
-UART_HandleTypeDef uart_handlers[UART_NUM];
-
-uart_irq_handler irq_handler;
-
-int stdio_uart_inited = 0;
-serial_t stdio_uart;
-
-void serial_init(serial_t *obj, PinName tx, PinName rx)
-{
-    struct serial_s *obj_s = SERIAL_S(obj);
-    
-    // Determine the UART to use (UART_1, UART_2, ...)
-    UARTName uart_tx = (UARTName)pinmap_peripheral(tx, PinMap_UART_TX);
-    UARTName uart_rx = (UARTName)pinmap_peripheral(rx, PinMap_UART_RX);
-
-    // Get the peripheral name (UART_1, UART_2, ...) from the pin and assign it to the object
-    obj_s->uart = (UARTName)pinmap_merge(uart_tx, uart_rx);
-    MBED_ASSERT(obj_s->uart != (UARTName)NC);
+#include "serial_api_hal.h"
 
-    // Enable USART clock + switch to SystemClock
-    if (obj_s->uart == UART_1) {
-        __USART1_FORCE_RESET();
-        __USART1_RELEASE_RESET();
-        __USART1_CLK_ENABLE();
-#if defined(RCC_USART1CLKSOURCE_SYSCLK) 
-        __HAL_RCC_USART1_CONFIG(RCC_USART1CLKSOURCE_SYSCLK);
-#endif
-        obj_s->index = 0;
-    }
-#if defined(USART2_BASE)
-    if (obj_s->uart == UART_2) {
-        __USART2_FORCE_RESET();
-        __USART2_RELEASE_RESET();
-        __USART2_CLK_ENABLE();
-#if defined(RCC_USART2CLKSOURCE_SYSCLK)
-        __HAL_RCC_USART2_CONFIG(RCC_USART2CLKSOURCE_SYSCLK);
-#endif
-        obj_s->index = 1;
-    }
-#endif
-#if defined(USART3_BASE)
-    if (obj_s->uart == UART_3) {
-        __USART3_FORCE_RESET();
-        __USART3_RELEASE_RESET();
-        __USART3_CLK_ENABLE();
-#if defined(RCC_USART3CLKSOURCE_SYSCLK)
-        __HAL_RCC_USART3_CONFIG(RCC_USART3CLKSOURCE_SYSCLK);
-#endif
-        obj_s->index = 2;
-    }
-#endif
-#if defined(UART4_BASE)
-    if (obj_s->uart == UART_4) {
-        __UART4_FORCE_RESET();
-        __UART4_RELEASE_RESET();
-        __UART4_CLK_ENABLE();
-#if defined(RCC_UART4CLKSOURCE_SYSCLK)
-        __HAL_RCC_UART4_CONFIG(RCC_UART4CLKSOURCE_SYSCLK);
-#endif
-        obj_s->index = 3;
-    }
-#endif
-#if defined(UART5_BASE)
-    if (obj_s->uart == UART_5) {
-        __HAL_RCC_UART5_FORCE_RESET();
-        __HAL_RCC_UART5_RELEASE_RESET();
-        __UART5_CLK_ENABLE();
-#if defined(RCC_UART5CLKSOURCE_SYSCLK)
-        __HAL_RCC_UART5_CONFIG(RCC_UART5CLKSOURCE_SYSCLK);
-#endif
-        obj_s->index = 4;
-    }
+#if defined (TARGET_STM32F302x8) || defined (TARGET_STM32F303x8) || defined (TARGET_STM32F334x8)
+    #define UART_NUM (3)
+#else
+    #define UART_NUM (5) // max value
 #endif
 
-    // Configure the UART pins
-    pinmap_pinout(tx, PinMap_UART_TX);
-    pinmap_pinout(rx, PinMap_UART_RX);
-    
-    if (tx != NC) {
-        pin_mode(tx, PullUp);
-    }
-    if (rx != NC) {
-        pin_mode(rx, PullUp);
-    }
-
-    // Configure UART
-    obj_s->baudrate = 9600;
-    obj_s->databits = UART_WORDLENGTH_8B;
-    obj_s->stopbits = UART_STOPBITS_1;
-    obj_s->parity   = UART_PARITY_NONE;
-
-#if DEVICE_SERIAL_FC
-    obj_s->hw_flow_ctl = UART_HWCONTROL_NONE;
-#endif
-
-    obj_s->pin_tx = tx;
-    obj_s->pin_rx = rx;
-
-    init_uart(obj);
-
-    // For stdio management
-    if (obj_s->uart == STDIO_UART) {
-        stdio_uart_inited = 1;
-        memcpy(&stdio_uart, obj, sizeof(serial_t));
-    }
-}
+uint32_t serial_irq_ids[UART_NUM] = {0};
+UART_HandleTypeDef uart_handlers[UART_NUM];
 
-void serial_free(serial_t *obj)
-{
-    struct serial_s *obj_s = SERIAL_S(obj);
-      
-    // Reset UART and disable clock
-    if (obj_s->uart == UART_1) {
-        __USART1_FORCE_RESET();
-        __USART1_RELEASE_RESET();
-        __USART1_CLK_DISABLE();
-    }
-    if (obj_s->uart == UART_2) {
-        __USART2_FORCE_RESET();
-        __USART2_RELEASE_RESET();
-        __USART2_CLK_DISABLE();
-    }
-#if defined(USART3_BASE)
-    if (obj_s->uart == UART_3) {
-        __USART3_FORCE_RESET();
-        __USART3_RELEASE_RESET();
-        __USART3_CLK_DISABLE();
-    }
-#endif
-#if defined(UART4_BASE)
-    if (obj_s->uart == UART_4) {
-        __UART4_FORCE_RESET();
-        __UART4_RELEASE_RESET();
-        __UART4_CLK_DISABLE();
-    }
-#endif
-#if defined(UART5_BASE)
-    if (obj_s->uart == UART_5) {
-        __UART5_FORCE_RESET();
-        __UART5_RELEASE_RESET();
-        __UART5_CLK_DISABLE();
-    }
-#endif
-
-    // Configure GPIOs
-    pin_function(obj_s->pin_tx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-    pin_function(obj_s->pin_rx, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, 0));
-
-    serial_irq_ids[obj_s->index] = 0;
-}
-
-void serial_baud(serial_t *obj, int baudrate)
-{
-    struct serial_s *obj_s = SERIAL_S(obj);
-
-    obj_s->baudrate = baudrate;
-    init_uart(obj);
-}
+static uart_irq_handler irq_handler;
 
 /******************************************************************************
  * INTERRUPTS HANDLING
@@ -785,7 +627,7 @@
     }
 }
 
-#endif
+#endif /* DEVICE_SERIAL_ASYNCH */
 
 #if DEVICE_SERIAL_FC
 
@@ -844,6 +686,6 @@
     init_uart(obj);
 }
 
-#endif
+#endif /* DEVICE_SERIAL_FC */
 
-#endif
+#endif /* DEVICE_SERIAL */