mbed official
mbed library sources. Supersedes mbed-src.
Dependents: Nucleo_Hello_Encoder BLE_iBeaconScan AM1805_DEMO DISCO-F429ZI_ExportTemplate1 ... more
Diff: targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_tim_ex.c
- Revision:
- 180:96ed750bd169
- Parent:
- 156:95d6b41a828b
--- a/targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_tim_ex.c Thu Dec 07 14:01:42 2017 +0000
+++ b/targets/TARGET_STM/TARGET_STM32F0/device/stm32f0xx_hal_tim_ex.c Wed Jan 17 15:23:54 2018 +0000
@@ -2,8 +2,6 @@
******************************************************************************
* @file stm32f0xx_hal_tim_ex.c
* @author MCD Application Team
- * @version V1.5.0
- * @date 04-November-2016
* @brief TIM HAL module driver.
* This file provides firmware functions to manage the following
* functionalities of the Timer Extended peripheral:
@@ -153,8 +151,8 @@
*/
/**
* @brief Initializes the TIM Hall Sensor Interface and create the associated handle.
- * @param htim : TIM Encoder Interface handle
- * @param sConfig : TIM Hall Sensor configuration structure
+ * @param htim TIM Encoder Interface handle
+ * @param sConfig TIM Hall Sensor configuration structure
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig)
@@ -233,7 +231,7 @@
/**
* @brief DeInitializes the TIM Hall Sensor interface
- * @param htim : TIM Hall Sensor handle
+ * @param htim TIM Hall Sensor handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim)
@@ -260,7 +258,7 @@
/**
* @brief Initializes the TIM Hall Sensor MSP.
- * @param htim : TIM handle
+ * @param htim TIM handle
* @retval None
*/
__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim)
@@ -275,7 +273,7 @@
/**
* @brief DeInitializes TIM Hall Sensor MSP.
- * @param htim : TIM handle
+ * @param htim TIM handle
* @retval None
*/
__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim)
@@ -290,7 +288,7 @@
/**
* @brief Starts the TIM Hall Sensor Interface.
- * @param htim : TIM Hall Sensor handle
+ * @param htim TIM Hall Sensor handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim)
@@ -311,7 +309,7 @@
/**
* @brief Stops the TIM Hall sensor Interface.
- * @param htim : TIM Hall Sensor handle
+ * @param htim TIM Hall Sensor handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim)
@@ -332,7 +330,7 @@
/**
* @brief Starts the TIM Hall Sensor Interface in interrupt mode.
- * @param htim : TIM Hall Sensor handle
+ * @param htim TIM Hall Sensor handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim)
@@ -356,7 +354,7 @@
/**
* @brief Stops the TIM Hall Sensor Interface in interrupt mode.
- * @param htim : TIM handle
+ * @param htim TIM handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim)
@@ -380,9 +378,9 @@
/**
* @brief Starts the TIM Hall Sensor Interface in DMA mode.
- * @param htim : TIM Hall Sensor handle
- * @param pData : The destination Buffer address.
- * @param Length : The length of data to be transferred from TIM peripheral to memory.
+ * @param htim TIM Hall Sensor handle
+ * @param pData The destination Buffer address.
+ * @param Length The length of data to be transferred from TIM peripheral to memory.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
@@ -429,7 +427,7 @@
/**
* @brief Stops the TIM Hall Sensor Interface in DMA mode.
- * @param htim : TIM handle
+ * @param htim TIM handle
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim)
@@ -479,8 +477,8 @@
/**
* @brief Starts the TIM Output Compare signal generation on the complementary
* output.
- * @param htim : TIM Output Compare handle
- * @param Channel : TIM Channel to be enabled
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -509,8 +507,8 @@
/**
* @brief Stops the TIM Output Compare signal generation on the complementary
* output.
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be disabled
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -539,8 +537,8 @@
/**
* @brief Starts the TIM Output Compare signal generation in interrupt mode
* on the complementary output.
- * @param htim : TIM OC handle
- * @param Channel : TIM Channel to be enabled
+ * @param htim TIM OC handle
+ * @param Channel TIM Channel to be enabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -606,8 +604,8 @@
/**
* @brief Stops the TIM Output Compare signal generation in interrupt mode
* on the complementary output.
- * @param htim : TIM Output Compare handle
- * @param Channel : TIM Channel to be disabled
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -679,15 +677,15 @@
/**
* @brief Starts the TIM Output Compare signal generation in DMA mode
* on the complementary output.
- * @param htim : TIM Output Compare handle
- * @param Channel : TIM Channel to be enabled
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be enabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
* @arg TIM_CHANNEL_3: TIM Channel 3 selected
* @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param pData : The source Buffer address.
- * @param Length : The length of data to be transferred from memory to TIM peripheral
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
@@ -796,8 +794,8 @@
/**
* @brief Stops the TIM Output Compare signal generation in DMA mode
* on the complementary output.
- * @param htim : TIM Output Compare handle
- * @param Channel : TIM Channel to be disabled
+ * @param htim TIM Output Compare handle
+ * @param Channel TIM Channel to be disabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -896,8 +894,8 @@
/**
* @brief Starts the PWM signal generation on the complementary output.
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be enabled
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be enabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -925,8 +923,8 @@
/**
* @brief Stops the PWM signal generation on the complementary output.
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be disabled
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -955,8 +953,8 @@
/**
* @brief Starts the PWM signal generation in interrupt mode on the
* complementary output.
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be disabled
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1022,8 +1020,8 @@
/**
* @brief Stops the PWM signal generation in interrupt mode on the
* complementary output.
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be disabled
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1095,15 +1093,15 @@
/**
* @brief Starts the TIM PWM signal generation in DMA mode on the
* complementary output
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be enabled
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be enabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
* @arg TIM_CHANNEL_3: TIM Channel 3 selected
* @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param pData : The source Buffer address.
- * @param Length : The length of data to be transferred from memory to TIM peripheral
+ * @param pData The source Buffer address.
+ * @param Length The length of data to be transferred from memory to TIM peripheral
* @retval HAL status
*/
HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
@@ -1212,8 +1210,8 @@
/**
* @brief Stops the TIM PWM signal generation in DMA mode on the complementary
* output
- * @param htim : TIM handle
- * @param Channel : TIM Channel to be disabled
+ * @param htim TIM handle
+ * @param Channel TIM Channel to be disabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1301,8 +1299,8 @@
/**
* @brief Starts the TIM One Pulse signal generation on the complemetary
* output.
- * @param htim : TIM One Pulse handle
- * @param OutputChannel : TIM Channel to be enabled
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channel to be enabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1326,8 +1324,8 @@
/**
* @brief Stops the TIM One Pulse signal generation on the complementary
* output.
- * @param htim : TIM One Pulse handle
- * @param OutputChannel : TIM Channel to be disabled
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channel to be disabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1355,8 +1353,8 @@
/**
* @brief Starts the TIM One Pulse signal generation in interrupt mode on the
* complementary channel.
- * @param htim : TIM One Pulse handle
- * @param OutputChannel : TIM Channel to be enabled
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channel to be enabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1386,8 +1384,8 @@
/**
* @brief Stops the TIM One Pulse signal generation in interrupt mode on the
* complementary channel.
- * @param htim : TIM One Pulse handle
- * @param OutputChannel : TIM Channel to be disabled
+ * @param htim TIM One Pulse handle
+ * @param OutputChannel TIM Channel to be disabled
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1 selected
* @arg TIM_CHANNEL_2: TIM Channel 2 selected
@@ -1445,15 +1443,15 @@
* configured in Hall sensor interface, this interface Timer will generate the
* commutation at its TRGO output (connected to Timer used in this function) each time
* the TI1 of the Interface Timer detect a commutation at its input TI1.
- * @param htim : TIM handle
- * @param InputTrigger : the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * @param htim TIM handle
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
* This parameter can be one of the following values:
* @arg TIM_TS_ITR0: Internal trigger 0 selected
* @arg TIM_TS_ITR1: Internal trigger 1 selected
* @arg TIM_TS_ITR2: Internal trigger 2 selected
* @arg TIM_TS_ITR3: Internal trigger 3 selected
* @arg TIM_TS_NONE: No trigger is needed
- * @param CommutationSource : the Commutation Event source
+ * @param CommutationSource the Commutation Event source
* This parameter can be one of the following values:
* @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
* @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
@@ -1494,15 +1492,15 @@
* configured in Hall sensor interface, this interface Timer will generate the
* commutation at its TRGO output (connected to Timer used in this function) each time
* the TI1 of the Interface Timer detect a commutation at its input TI1.
- * @param htim : TIM handle
- * @param InputTrigger : the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * @param htim TIM handle
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
* This parameter can be one of the following values:
* @arg TIM_TS_ITR0: Internal trigger 0 selected
* @arg TIM_TS_ITR1: Internal trigger 1 selected
* @arg TIM_TS_ITR2: Internal trigger 2 selected
* @arg TIM_TS_ITR3: Internal trigger 3 selected
* @arg TIM_TS_NONE: No trigger is needed
- * @param CommutationSource : the Commutation Event source
+ * @param CommutationSource the Commutation Event source
* This parameter can be one of the following values:
* @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
* @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
@@ -1547,15 +1545,15 @@
* commutation at its TRGO output (connected to Timer used in this function) each time
* the TI1 of the Interface Timer detect a commutation at its input TI1.
* @note: The user should configure the DMA in his own software, in This function only the COMDE bit is set
- * @param htim : TIM handle
- * @param InputTrigger : the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
+ * @param htim TIM handle
+ * @param InputTrigger the Internal trigger corresponding to the Timer Interfacing with the Hall sensor
* This parameter can be one of the following values:
* @arg TIM_TS_ITR0: Internal trigger 0 selected
* @arg TIM_TS_ITR1: Internal trigger 1 selected
* @arg TIM_TS_ITR2: Internal trigger 2 selected
* @arg TIM_TS_ITR3: Internal trigger 3 selected
* @arg TIM_TS_NONE: No trigger is needed
- * @param CommutationSource : the Commutation Event source
+ * @param CommutationSource the Commutation Event source
* This parameter can be one of the following values:
* @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
* @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
@@ -1599,8 +1597,8 @@
/**
* @brief Configures the TIM in master mode.
- * @param htim : TIM handle.
- * @param sMasterConfig : pointer to a TIM_MasterConfigTypeDef structure that
+ * @param htim TIM handle.
+ * @param sMasterConfig pointer to a TIM_MasterConfigTypeDef structure that
* contains the selected trigger output (TRGO) and the Master/Slave
* mode.
* @retval HAL status
@@ -1636,8 +1634,8 @@
/**
* @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State
* and the AOE(automatic output enable).
- * @param htim : TIM handle
- * @param sBreakDeadTimeConfig : pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that
+ * @param htim TIM handle
+ * @param sBreakDeadTimeConfig pointer to a TIM_ConfigBreakDeadConfigTypeDef structure that
* contains the BDTR Register configuration information for the TIM peripheral.
* @retval HAL status
*/
@@ -1686,8 +1684,8 @@
/**
* @brief Configures the TIM14 Remapping input capabilities.
- * @param htim : TIM handle.
- * @param Remap : specifies the TIM remapping source.
+ * @param htim TIM handle.
+ * @param Remap specifies the TIM remapping source.
* This parameter can be one of the following values:
* @arg TIM_TIM14_GPIO: TIM14 TI1 is connected to GPIO
* @arg TIM_TIM14_RTC: TIM14 TI1 is connected to RTC_clock
@@ -1725,10 +1723,10 @@
defined(STM32F091xC) || defined (STM32F098xx)
/**
* @brief Configures the OCRef clear feature
- * @param htim: TIM handle
- * @param sClearInputConfig: pointer to a TIM_ClearInputConfigTypeDef structure that
+ * @param htim TIM handle
+ * @param sClearInputConfig pointer to a TIM_ClearInputConfigTypeDef structure that
* contains the OCREF clear feature and parameters for the TIM peripheral.
- * @param Channel: specifies the TIM Channel
+ * @param Channel specifies the TIM Channel
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1
* @arg TIM_CHANNEL_2: TIM Channel 2
@@ -1890,7 +1888,7 @@
/**
* @brief Hall commutation changed callback in non blocking mode
- * @param htim : TIM handle
+ * @param htim TIM handle
* @retval None
*/
__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim)
@@ -1905,7 +1903,7 @@
/**
* @brief Hall Break detection callback in non blocking mode
- * @param htim : TIM handle
+ * @param htim TIM handle
* @retval None
*/
__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim)
@@ -1920,7 +1918,7 @@
/**
* @brief TIM DMA Commutation callback.
- * @param hdma : pointer to DMA handle.
+ * @param hdma pointer to DMA handle.
* @retval None
*/
void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma)
@@ -1953,7 +1951,7 @@
/**
* @brief Return the TIM Hall Sensor interface state
- * @param htim : TIM Hall Sensor handle
+ * @param htim TIM Hall Sensor handle
* @retval HAL state
*/
HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim)
@@ -1976,12 +1974,12 @@
/**
* @brief Enables or disables the TIM Capture Compare Channel xN.
* @param TIMx to select the TIM peripheral
- * @param Channel : specifies the TIM Channel
+ * @param Channel specifies the TIM Channel
* This parameter can be one of the following values:
* @arg TIM_CHANNEL_1: TIM Channel 1
* @arg TIM_CHANNEL_2: TIM Channel 2
* @arg TIM_CHANNEL_3: TIM Channel 3
- * @param ChannelNState : specifies the TIM Channel CCxNE bit new state.
+ * @param ChannelNState specifies the TIM Channel CCxNE bit new state.
* This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable.
* @retval None
*/
